Stroj Za Navijanje nakup rabljenega (117.530)

Leto izdelave: 1997, Stanje: rabljeno, Brush Deburring Machine RSA RASAMAX MONO for brushes Ø 250 mm and approx. brush width 80 mm Speed range 1500 / 3000 rpm Operating voltage 380 Volt Gsdpfx Asimbq Dofqjbg Total power requirement 2.0 / 3.0 kW Weight approx. 180 kg Suitable for deburring sheet metal with contours, for material thicknesses from approx. 1.0 mm to 6.0 mm. 2-step brush speed: 1500 or 3000 rpm. The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us for further information.

Stanje: dober (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 20080229, This is a C-frame welding station Type: 130 MF Machine No.: 20080229 Year of manufacture: 2009 U1N: 400V / 50Hz U20: -9V Step 1 S1: 58 kVA I2p: 6.46 kA duty cycle 100% S%: 130 kVA duty cycle 20% Fmax: 1140 daN at 6 bar I20c: 42.5 kA Q: 18 L/min Opening: up to 170 mm Throat depth: 350 mm Gbedevgdt Aopfx Afqeg Control cabinet: Machine No.: 20100079

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Enostranski nanesevalec lepila OSAMA S2R-1300 Gedpfex Tha Ssx Afqjbg Delovna širina: 1300 mm Min./maks. višina prehoda: 0-90 mm Premer nanašalnih valjev: 185 mm Hitrost podajanja: 18 m/min Motor: 0,37 kW Zgornji valj rebrast Spodnji valj gladek Nova gumijasta prevleka valjev

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: Gbodpfst Dx U Ssx Afqog For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Drilling capacity in St 60: 40 mm Thread cutting in St 60: M 24 Thread cutting in GG 20: M 30 Short spindle: MK 3 Drilling stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table – usable surface: 514 x 360 mm T-slots number – width – spacing: 2 x 14 x 224 mm Distance spindle to machine table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Spindle speeds: 160–2,250 rpm Total power requirement: 1.45/1.9 kW Gbodpfx Afeifkpwsqjg Machine height: 1,840 mm Machine weight approx.: 285 kg Standard equipment: - Mushroom push button (latching) for emergency stop - Directional switch for clockwise/counterclockwise rotation - Motor protection switch - Infinitely variable speed control - Digital speed display - Feed overload protection - Protection class IP 54 - Plug connector (pre-assembled, cable length 2 m) - Spindle guard with electrical interlock

Stanje: rabljeno, Heidelberg OHT GTS Gedpfxex Tt Ibj Afqebg

Stanje: novo, Leto izdelave: 2024, ALZMETALL Column Drilling Machine AB 34 iTRONIC, Drilling capacity in steel: 34mm, Spindle speeds: 100-1800 rpm, short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, machine table usable area: 615x430mm, with T-slots 2 x 14mm x 224mm, spindle-to-table distance min. / max. 138/688mm, machine table height adjustment via hand crank, feeds: 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: - 7” TFT – LCD display with touch function - Tapping device - Infinitely variable speed adjustment - Spindle guard - Three separate push-buttons for right-hand – left-hand rotation – stop - Emergency stop mushroom button - Main switch Gsdpfx Aeiqyixofqjbg - Right and left-hand rotation - Control voltage 24 Volt - Protection class IP 54 - Motor insulation class “F” (155°) - Electromagnetic feed overload protection - Initial machine oil filling Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Including the following options: - LED machine light Pos. 12 - Coolant system A Pos. 24 - Foot switch for tapping Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can gladly be inspected at our premises by appointment.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 940329, vrsta hlajenja: voda, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Gbedpfjvbgxqox Afqog Dqm: 72N U1N: 400V 1~ 50 Hz Sn 50% DC: 100 kVA S max: 318 kVA I20c: 48 kA U20 from 5.8 V to 8.3V in 2 steps Electrode gap: 240mm - 500mm Projection length: 350mm Fmax: 1100 daN at 6 bar Cooling water: 10L/min

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device Godpfxjuxqzue Afqebg 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Table size: 860x240 mm, 3 T-slots 14 mm, spindle taper SK30, Gedeiqkc Iepfx Afqjbg Travel distances: X/Y/Z = 450/200/430 mm, spindle speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overarm arbor supports, 1 collet chuck with key, 1 machine vice with crank handle.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 180991_03, This is a Wagner spot welding machine Type: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder Year of manufacture: 2019 Gjdpfx Afevgd Efoqobg Connection voltage: 40V Rated frequency: 50Hz Maximum secondary current: 17kA Rated power at 20% duty cycle: 110 kVA Welding force: 1 kN at 1 bar Maximum operating pressure: 10 bar FELDPAUSCH nut and bolt feeder Type: MSV 08

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. Gsdpfx Afstt Da Doqebg • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, ALZMETALL column drilling machine, drilling capacity in steel: 30mm Short taper spindle MK3, spindle stroke: 140mm, throat depth: 293mm, column diameter: 115mm, usable machine table surface: 514x360mm, with T-slots 2 x 14mm x 224mm, spindle-to-table distance min./max.: 132/724mm, machine table height adjustment via hand crank, manual feed, machine height without options: 1790mm, net weight: 260kg. - Infinitely variable speed 100-1800 rpm Standard features: mushroom pushbutton (latching) for EMERGENCY STOP, reversing switch for clockwise/anticlockwise operation, motor protection switch, stepless speed adjustment, digital speed display, protection class IP54, spindle guard with electrical interlock, finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Gbjdpjid I Ixofx Afqjg Including the following options: LED machine lamp, Pos. 12. Delivery time: from stock Waiblingen Beinstein

Stanje: novo, With the RFM 320 S SET model, we offer you a grinding machine that allows you to produce bevels up to 16 mm wide quickly and with optimal grinding quality in a single pass. Short setup times ensure efficient processing, even for individual workpieces. The RFM 320 S SET is equipped with a grinding belt oscillation system featuring pneumatic belt cleaning and a pre-milling unit. Standard equipment RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) › Bevel grinding device for bevels up to 16 mm width › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed › Suction connection Ø 80 mm Pre-milling unit Undercarriage Extendable table extension Setup dimensions (L x W x H in mm): 1,300 x 690 x 1,010 Weight: 145 kg Gsdpfx Afof E Nqdoqobg

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Gjdov Hm Nmopfx Afqobg Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm Gsdpfx Afjdd Hi Ejqsbg - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Gjdpfxjr A Eq Ro Afqebg Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: Gsdpfxev Tb Hgo Afqobg • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. Gbjdocuwptopfx Afqeg (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Gbodohy Tlrepfx Afqog Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Gedpfxewiwnqs Afqobg Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device Gjdpfx Asl D Rp Ejfqsbg HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Gbsdpfxelc Ewie Afqog Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Gedpfx Afod Supgoqjbg Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Gbedpfx Aog Nn E Nefqeg Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)