Stroj Za Čiščenje nakup rabljenega (118.084)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Clamping range: 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Djdpfevr Ec Aox Afljkg Tool holder speed (no load): 150 rpm, nominal: 70 rpm Clamping with wrench Manual tool feed Weight approx. 6.5 kg Includes operating manual Supplied in wooden case Incl. 1 facing tool (90°) and 2 beveling tools (30°)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Djdpfxot Dx U So Afljkg Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10108, premer brusilnega koluta: 100 mm, dolžina brušenja: 100 mm, širina na sredini: 100 mm, hitrost vretena za brušenje: 18.000 obr/min, največja hitrost vretena: 250 obr/min, TECHNICAL DETAILS Grinding spindle headstock Feed: X1 axis (CNC-controlled) Traverse: Z1 axis (CNC-controlled) Grinding spindle (I) Feed: X2 axis (CNC-controlled) Traverse: Z2 axis (CNC-controlled) Grinding spindle (II) Feed: X3 axis (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: Lifetime grease lubrication Bearing seal: With sealing air Set air pressure: see section 5.3.1 Drive: 12 kW Speed control: Frequency inverter Max. speed: 18,000 rpm Balancing: Electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Dkedpfx Afewynhvslsg Bore: Ø 32 mm Grinding wheel width: max. 20 mm Peripheral speed: max. 125 m/s Cam workpiece Max. workpiece spinning diameter: 80 mm Max. clamping length: 100 mm Max. grinding length: 100 mm Max. workpiece weight: 0.5 kg Workpiece headstock Design: Fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: Oil lubrication Set air pressure: see section 5.3.1 Drive: Servo motor, C1 axis (CNC-controlled) Max. speed: 250 rpm Tailstock Longitudinal adjustment: Manual via gear wheel Tailstock quill Rotating centre: Mounting bore Ø 20 mm Clamping force: Adjustable via pneumatic system Dimensions: 50 x 80 x 178 mm Lubrication: Lifetime grease lubrication Bearing seal: With sealing air Set air pressure: see section 5.3.1 Grinding support (slide) Design: Fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see section 5.3.1 Grinding wheel profiling Fine dressing: Circumference and face with diamond roller, mounted on dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: Lifetime grease lubrication Bearing seal: With sealing air Set air pressure: see section 5.3.1 Drive: 5.3 kW Speed control: Frequency inverter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connected load: 87 kVA

Stanje: rabljeno, Type: SMH 060 Bandsaw Blade Grinding Machine. Dkjdpfot Iv Tyox Aflsg Band width up to: 60 mm. Power supply: 400 V / 50 Hz. For removing welding burrs on butt joints. In used condition, cleaned, newly painted, and tested. 2 units in stock.

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. Dsdpfxsuxqzuo Afljkg (We only respond to inquiries that include your address and telephone number!)

Leto izdelave: 2012, Stanje: rabljeno, Rofin DQ x80 Laser Source Dsdpfx Afsk Dtnfjlskg The laser was decommissioned in 2015 from a bankrupt solar module production facility in California and has not been used since. Currently in stock: 2 x DQ x80 laser sources and 2 coolers are available. Year of manufacture: 2012 and 2010 Voltage: 480 [V] Frequency: 50/60 [Hz] Current: 31.2 [A] Weight: 875 [kg] The listed price includes: 1x Rofin DQ x80 1x Chiller Galvo head Optics

Stanje: novo, With the RFM 320 S SET model, we offer you a grinding machine that allows you to produce bevels up to 16 mm wide quickly and with optimal grinding quality in a single pass. Short setup times ensure efficient processing, even for individual workpieces. The RFM 320 S SET is equipped with a grinding belt oscillation system featuring pneumatic belt cleaning and a pre-milling unit. Standard equipment RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) Dsdpfxef E Nqdo Aflskg › Bevel grinding device for bevels up to 16 mm width › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed › Suction connection Ø 80 mm Pre-milling unit Undercarriage Extendable table extension Setup dimensions (L x W x H in mm): 1,300 x 690 x 1,010 Weight: 145 kg

Stanje: dober (rabljeno), številka stroja/vozila: Blinie, BSTA 30 Strokes per minute: 600 spm Feed unit BBV 120/60 High-performance: 600 spm Dodpfx Ajdguhceflekg Press force: 30 tons Maximum strip width: 190 mm Additional high-speed presses in stock from Bruderer – models BSTA 18, 20, 30, 200, 50 – as well as presses from Schaal and Mabu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Djdett Da Dspfx Aflekg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: dober (rabljeno), BSTA 30 Strokes per minute: 600 spm Dedpfx Ajda Ha Nofljkg Feed: BBV High-performance: 600 spm Pressing force max.: 300 kN Maximum strip width: 190 mm Machine overhauled, in good condition. More high-speed presses in stock from Bruderer models BSTA 18, 20, 30, 200, 50, as well as presses from Schaal and Mabu.

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dkjdpfx Afsv Hm Nmsljg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: rabljeno, Leto izdelave: 2015, Arc welding machine for connecting coils Type: LBS043 / 80 / 1.5 Coil joining machine. Equipped with Fronius Magic Wave 2200 Job G/F arc welding unit. Pneumatic clamping system. Dkjdpjlddxhefx Afljg Siemens HMI touchscreen control. Year of manufacture: 2015. Suitable for coil/strip widths up to 80 mm. Used machine in operational condition. Strip length: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Power supply: 400 V / 50 Hz. Supplied with German operating manual, circuit diagrams, and packaging. Immediate availability from stock. Additional used machines in stock from manufacturers such as Ideal BAS 050, BAS 100 and 120, Bruderer, Schaal, Mabu, Bihler, and more.

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. Dedsdd Hi Ejpfx Aflekg (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 40 mm, vgradna višina: 2.400 mm, skupna širina: 17.000 mm, dolžina mize: 400 mm, širina mize: 400 mm, stiskalna sila: 25 t, nastavitev hoda: 17 mm, delovna širina: 200 mm, skupna masa: 2.500 kg, leto zadnje generalne obnove: 2023, moč: 0,003 kW (0,00 KM), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in Dec. 2023. Max. force: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power output: 3 kW. Power supply: 230 / 400 V. Air connection: 5.5 bar. Feed unit: Silicon SFS 200, left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with inspection window. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. Dkedpfx Aoq Ikhpoflsg In stock, tested and ready for shipment. Additional used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Dkedpfx Ajr A Eq Roflog Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Model: BAS 100. Stroj za varjenje tračnih žag z utripnim varjenjem. Hidravlično vpenjanje. Časovnik za popuščanje. Naprava za pozicioniranje žaginega lista. Leto izdelave: 1997. Samodejni nadzor temperature popuščanja. Varjenje lesenih trakov do 100 mm. Bimetalni trak do 80 mm. Priklop: 3 x 220 V. (možen tudi 3 x 400V na zahtevo) Teža: 500 kg. Dimenzije (Š*G*V): 1400*900*1500 mm. Dodpfx Afsw Snpiolokg Navodila in embalaža vključena.

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Dedov Tb Hgjpfx Aflskg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dkodpfx Afjcuwpteljg Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Veneer Splicing Machine Electric motor, separately controlled for chains and glue application Glue is applied to the edge of the newly inserted veneer strip, which increases the strength of the glued joint. Robust, durable stainless steel conveyor chain with pivot links Separate adjustment for temperature, speed, and pressure Dksdpfx Afexgg Hhelog Quick and easily accessible glue tank for fast and simple refilling or cleaning Multiple heating zones for individual temperature settings Extended glue tank service life due to integrated cooling unit Continuously adjustable feed speed INCLUDES GLUE COOLER Technical data: Throat depth: 1200 mm Veneer strip width: 45–1200 mm Veneer strip length: 300–3200 mm Veneer strip thickness: 0.4 – 3.0 mm Veneer moisture max. 8 – 12% Working height: 900 mm Feed speed: 5 – 50 m/min Heating zone length: 1000 mm Max. heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions L x W x H = 2400 x 2300 x 1900 mm Weight: 1500 kg SPARE PARTS VALUED AT EUR 3,500 HAVE BEEN INSTALLED

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw Dedpfxohy Tlrj Afljkg - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Edge cutting device Dkodswiwnqopfx Afleg Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Dkedpel D Rp Ejfx Afleg Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Djdpfx Afelc Ewijljkg Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° Djdpfx Afsd Supgolekg - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Dodpfx Afeg Nn E Nolskg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)