Stretc nakup rabljenega (77)

Stanje: dober (rabljeno), Naprodaj profesionalna bolnišnična transportna postelja / medicinska nosila znamke Stryker – model Prime Series 1125 Zoom. Naprava se uporablja v bolnišnicah in urgentnih oddelkih za prevoz pacientov. Model je opremljen s sistemom Zoom Drive, ki omogoča električno pomoč pri vožnji in bistveno olajša transport pacienta. Oprema Stryker Medical USA – enega največjih svetovnih proizvajalcev medicinske opreme. Postelja ima nastavljivo naslonjalo, stranske varovalne ograje ter zaviralni in krmilni sistem. Djdoyuqt Njpfx Aqxjkt ⸻ Tehnični podatki • Proizvajalec: Stryker Medical • Model: 1125 Prime Series Zoom • Letnik: 2014 • Pogon: Zoom Drive – električna pomoč • Največja nosilnost: 318 kg • Širina ležišča: 66 cm • Nastavljivo naslonjalo • Zložljive stranske ograje • Centralno zaviranje • Transportna kolesa za bolnišnične prevoze

Stanje: zelo dobro (rabljeno), Mobilna naprava za ovijanje palet s funkcijo prednapenjanja folije. Inventarna številka: 3897 Proizvajalec: Robopac Tip: Robot Master PDS Letnik izdelave: 2017 Tehnični podatki (približno): * Največja višina ovijanja: 2200 mm * Največja širina: neomejena * Najmanjša širina: približno 600 mm * Nastavljiva hitrost gibanja * Širina folije: 500 mm * Največji premer tulca: 76 mm * Lastna teža: približno 340 kg * V odličnem stanju! Dedpfjzp R Tdex Aqxekt

Stanje: rabljeno, Leto izdelave: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Using a tipping device, preforms are unloaded from a container into the feed hopper. From there, the preforms are conveyed by an elevator belt with electronically controlled speed and are supplied via a chute and loading starwheel to the blow molding machine in a uniform orientation. The shape and size of the preforms are inspected, and defective preforms are ejected before being delivered to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated by infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are monitored by an optical pyrometer. Grippers feed and remove the preforms to/from the blow wheel. The blowing unit uses 'crocodile molds,' in which the stretching along the longitudinal axis is supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are extracted from the cavities by grippers and conveyed to the discharge station. Machine (additional info): Rotary blow molding machine Power: 58 kW Number of cavities: 8 units Number of bottles ejected per cycle: 202 units Blow pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water supply: 4 bar Compressed air: 360 Nm³/h at 7 bar Dedpfx Aexyktloqxskt Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with container tipping device, preform elevator conveyor, preform inspection, heating ovens, blow wheel, bottle discharge, on-screen visualization Weight: 16,700 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Ponujamo ta stroj Comag SLR 9/1 za nalepljanje rokavov, ki je praktično nov, leto izdelave 2023. Vrsta stroja: SLR 9/1 Serijska številka: C023 Dsdpfszmt Ncsx Aqxekt Leto izdelave: 2023 Nazivna napetost: 380 V Faze / frekvenca: 3+N/50 Hz Nazivni tok pri polni obremenitvi: 17,5 A Vršni tok pri zagonu: 22 A Tok največje obremenitve: 4,8 A Prekinjalna moč varnostne naprave: 15000 A Številka električnega diagrama: C023 Če imate kakršna koli vprašanja ali želite več informacij, nam pošljite sporočilo ali nas pokličite.

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 160504PW1-349, Ponujamo rabljeno strojno opremo YOUNGSUNPACK EUROPE MH-FG-1000AS, tip paletirni stroj/raztegovalni stroj, leto proizvodnje 2016. proizvajalec: YOUNGSUNPACK EUROPE Dkedpfxszlqa As Aqxst model: MH-FG-1000AS leto izdelave: 2016 tehnično stanje: dobro kategorija: 543 tip stroja: paletirni stroj/raztegovalni stroj Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nas kontaktirajte.

Leto izdelave: 1995, stanje: dober (rabljeno), Strapping machine, packaging machine, strapping machine, skin pack machine, wrapping machine, winding machine, drive unit for stretch wrapping system - Manufacturer: Waldys, drive unit for stretch wrapping system Model 55 - Motor: 4 kW / 80 - 16 rpm Dedou Huubspfx Aqxjkt - Single components: see photos - Dimensions: 640/570/H680 mm - Weight: 120 kg

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, UHLMANN E 3025 STRETCH BANDING MACHINE Rabljeni stroj za ovijanje z raztegljivo folijo, namenjen za pakiranje na koncu proizvodne linije, kot je združevanje in ovijanje kartonov v stabilne pakete za nadaljnjo obdelavo, pakiranje v škatle ali distribucijo. Za področja, kjer je potrebna zanesljiva vezava kartonov, kot so farmacevtska, nutracevtska in zdravstvena industrija. - Leto izdelave: 2004 - Dimenzije: 1.600 mm D x 1.400 mm Š x 2.000 mm V (približno) PROIZVODNJA - Zmogljivost: do 30 paketov/min (maks.) - Dovodna kapaciteta: do 300 kartonov/min Dedsy Sgi Ajpfx Aqxekt - Premer koluta folije: 300 mm (maks.) - Velikost kartona: 130 x 105 x 250 mm (maks.) - Velikost paketa: 300 x 250 x 400 mm (maks.) PORABA ENERGIJE - Nazivni tok: 4,5 A - Nazivna napetost: 3/N/PE AC, 400V, 50Hz - Varovalka: 25 A

Stanje: dober (rabljeno), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang, BC-40 CA – used - : Price ex location: only €5,950 (net)! Manufacturer: Bang & Co Model: BC-40 CA Year of manufacture: The BC-40 CA is a fully automatic, horizontal stretch wrapper designed for bundling and spiral wrapping of products placed on a corrugated cardboard blank. After the foot pedal is engaged, the machine automatically centers the blank positioned on the infeed conveyor and guides it to the rotating ring. The size of the blank is automatically detected and assigned to one of the ten adjustable wrapping programs. The feed and ring rotation speeds are adjustable and controlled via frequency inverters. The product is fully automatically secured to the blank by the machine, and a clamping and cutting system ensures the film is applied and cut at the beginning and end of each wrapping cycle. The machine features a quick-change system for rapid film roll replacement. Max. roll diameter: 150 mm Film width: 70-125 mm Core diameter: 38 mm Film thickness: 15-35 µ Ring rotation speed: 30-140 rpm Power supply: 220/240 V – 50/60 Hz, 1 PH Dksdpfx Ajy Ru Nusqxjt Machine weight: 320 kg Machine start: foot pedal Length of infeed and outfeed conveyor: 1500 / 500 mm Compressed air consumption: 0.75 l/m³ per minute Compressed air: 6 BAR Compressed air consumption per cycle: 0.15 Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Leto izdelave: 1997, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13205, For sale: Pallet wrapping machine by STREMA. This machine is ideal for companies prioritizing transport security and efficiency. Technical details: Manufacturer: STREMA Stretch Packaging Systems Model: M 500 Year of manufacture: 1997 Machine no.: 13205 Connection: 400 V Power: 0.4 kW Base dimensions: 2,500 x 1,500 mm Turntable diameter: 1,500 mm Total height: 2,500 mm Recommended installation area: 4 x 3.0 m Max. pallet weight: 1,500 kg Transport and loading can be organized Europe-wide upon request and for an additional charge. Prices are plus VAT Dedpfoy Em Dtsx Aqxskt Inspection by appointment possible. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Leto izdelave: 2025, stanje: novo, MANUAL STRETCH WRAPPING MACHINE THE LATEST INCREDIBLY INNOVATIVE IDEA FROM ITALDIBIPACK: TWO SYSTEMS, THREE FUNCTIONS IN ONE JOLLY WORK LIFTER & STRETCH WRAPPER Thanks to the "TRANSFORMER"® device, the lifter and the assistant for stacking pallets, Jolly Work, can be instantly converted into a stretch wrapper without the need to attach or remove any parts. JOLLY WORK—to save time, money, efficiency, and health! Fortunately, JOLLY has arrived… In terms of workplace health and safety, manual lifting of heavy goods and hand-wrapping with stretch film pose significant health risks. Jolly Work increases productivity and operational profitability, enhancing overall results: it assists with, and enables, the stretch wrapping of higher loads, and in lifter mode, it is a major aid for preparing shipments. TECHNICAL DATA Machine dimensions L x W x H: 640 x 760 x 1950 mm Machine weight: 45 kg (including batteries) Battery operation: 24 V DC (2 x 12 V - 9 Amp batteries) Plug-in power supply for battery charger: 220 V / 1 Ph / 6 A Motorized drive system: 24 V DC Lifting/lowering speed: adjustable Max. wrapping height: 2150 mm Suitable film: PE/pre-stretched TECHNICAL SPECIFICATIONS IN LIFT MODE (Optional) Lift platform dimensions: 500 x 450 mm Max. lifting weight: up to 50 kg, in decreasing steps Maximum lifting height: 1500 mm / 50 kg Lift platform made of aluminum/wood TECHNICAL SPECIFICATIONS IN STRETCH WRAPPER MODE Standard film: 23 micron / Pre-stretched film with 9-10-12-15 µm thickness Outer film roll diameter: 105 mm Stretch film reel height: 440/450/500 mm Maximum core holder height: 460 mm / 520 mm (500 mm film) Inner core diameter: 50 mm Adjustable film feed speed Dedjmv Eixepfx Aqxekt Adjustable stretch film tension via mechanical brake Quick-release system with preset brake level

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Eckold dodatki ECKOLD - FWR60S Natezne matrice za 2 mm jeklo, 60 mm okrogle MACH-ID 6883 Dksdpszc H N Nsfx Aqxjt Proizvajalec: ECKOLD Tip: FWR60S Leto izdelave: 2013 Dolžina: 300 mm Širina: 150 mm Višina: 150 mm Teža: 20 kg Prosimo, upoštevajte: Informacije na tej strani smo zagotovili po najboljših močeh in, kjer je bilo mogoče, pridobili tudi od proizvajalca. Informacije so podane v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo pravnih izjav ali pogodbene pogoje. Priporočamo, da preverite vse pomembne podatke.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Dolžina: 300 mm Širina: 150 mm Višina: 150 mm Dksdpfx Aqezc Hz Sjxjt Prosimo, upoštevajte: Podatki na tej strani so bili zbrani po našem najboljšem vedenju in, če je bilo mogoče, tudi od proizvajalca. Informacije so podane v dobri veri, vendar natančnost ni zagotovljena. Skladno s tem ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Dedskucxlopfx Aqxskt Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale: Strapex Delta SWS 18 Pallet Wrapper The machine has been dismantled for transport but is fully operational and ready for use after assembly (illustrative image is the manufacturer's original photo). Technical Data: • Turntable diameter: 1800 mm • Maximum turntable speed: 10 rpm Djdpfx Aqowza Dxexjkt • Weight: 350 kg • Manufacturer: Strapex • Maximum load weight: 1500 kg • Power supply: 220 V • Wrapping functions: - Top sheet wrapping - Bottom wrapping - Top wrapping - Cross wrapping - Spiral wrapping Transport and loading can be organized Europe-wide for an additional charge upon request. All prices are subject to VAT. Viewing possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or to get in touch, please visit our website.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), easyFrame je polavtomatska rešitev za napenjanje platen v okvir, proizvajalca Imaging Solutions AG. Omogoča obdelavo do 50 okvirjev na uro (odvisno od operaterja). Stroj je v odličnem stanju. Opremljen je z nosilci za okvirje, ki omogočajo izdelavo napenjalnih okvirjev za platna dimenzij od 8x6 do 43x43 palcev. Dedpfxjn Ut Hcj Aqxokt

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HELIX 30, Current Status & Availability: The stretch wrapping system is fully operational and currently still in daily use. Availability: The complete system is still fully integrated into production operations and can be inspected under operating conditions by prior arrangement. Dismantling/replacement by the buyer must occur during calendar weeks 46-47 / 2026. System Description: - Robust 4-column construction - Rotating arm with film carriage - Integrated top sheet dispenser Dkjdpfx Aqoy Sziqsxjt - Turntable for pallet rotation - Automatic pallet height detection via photo cell - Variable setting for number of top and bottom wraps - Variable wrapping program settings - Blower unit: The start of the film is blown from below and wrapped into the load - Pre-stretch system P.G.S.A. (see 1.5, 1.5.1): For film consumption reduction and increased load securing - With this pre-stretch system, the film tension applied to the load can be adjusted via the dancer roller - Siemens S7-200 PLC control with free-standing control cabinet - Machine operation and information displayed on operator display - Triple signal lights for operating status indication - Machine equipped with Robopac standard components - Electrical installation to IP 54 protection class - Documentation included - Machine built according to CE and EMC standards Safety light barriers at infeed and outfeed (Robopac Sistemi standard) As per EU directive for automatic machines (Directive 89/392/EEC), the plant carries CE marking and is delivered with a declaration of conformity - Equipped to European safety standard with EMC (89/336/EEC) and parts of EU standards EN 292, EN 294, EN 811, EN 60204 - Machine is fully assembled and tested prior to delivery - Packaging suitable for truck transport (machine on wooden pallet, covered with film)

Leto izdelave: 1997, stanje: zelo dobro (rabljeno), The PEWOPACK 450 is an electronically and pneumatically controlled shrink banding machine designed for the packaging of single and multi-piece units. It stacks the products in cartons and seals them in thermo-shrink film. Output (max.): 60 cartons/min Film type: PE Film width: 50 - 450 mm Film thickness: 0.025 - 0.100 mm Dsdpfx Aqjdy U Aujxokt Maximum roll diameter: 300 mm

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi01, Stretch Wrapper Synthesi Dsdpfx Aoykuddsqxjkt TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at wrap start and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop functions, reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program change F02 - Stepless turntable speed adjustment 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 turns) F06 - Number of wraps at pallet top (1 - 10 turns) F09 - Photo eye delay for wrapping height F13 - F16 - Film tension for foot & head wrap / up & down wrap independently adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 savable wrapping programs F01-1 - Cross wrapping (upward/downward) F01-2 - Simple wrapping (up or down only) F01-3 - Push button for manual functions F10-F11 - Wrapping cycle with preset start and stop height F12 - Wrapping to a stored height (deactivates height photo sensor) F22 / F23 - Wrapping cycle for top sheet F29 - Soft start cycle for edge protection placement F30-F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on film carriage Film specification: max. outside diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total output: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Built-in frame Photo sensor for black products Cutting device etc. Other units available from stock in Ludwigsburg. Images may show options subject to additional charge.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MARATHON01, Semi-automatic manual film wrapper MARATHON TECHNICAL DETAILS The only "PATENTED" non-electrically powered mobile stretch wrapper worldwide capable of wrapping pallets with LLDPE stretch film. The machine wraps loads of any shape, weight, and size. It is recommended to use pre-stretched film with a roll diameter of max. Ø 230 mm. Minimum load dimensions: 650 x 400 mm. Djdpfxeykuf Is Aqxskt Minimum load weight: 50 kg. Wrapping height (including pallet): 2000 mm. Easy operation without reliance on a motor. Manual movement by the operator. The film carriage is moved up and down manually. The machine features simplified functions. Replaces manual hand wrapping. MANUAL WRAPPING OPTIONS The operator functions as the motor; number of wraps up and down is freely selectable. FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage. Film specification: Max. outer diameter Ø 230 mm - core Ø76 mm - height = 500 mm. Optional: Stretch film with core Ø50 mm or coreless. Additional machines available from stock in Ludwigsburg.

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Dedpfxeykucme Aqxokt FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm – 200mm, for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at stretch start and cycle end Emergency stop button in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All machine parameters adjustable via display F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) Dksdpfx Aoykuhcoqxot F09 – Pallet wrap height setting F62 – Ergonomic film change height ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a set height (disabling photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification max. outside diameter Ø 250 mm – core Ø 76mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other units available from stock at short notice.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm Dedpfx Asykuh Noqxskt 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Dedsykuiaopfx Aqxokt Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23EVA01, Stretch Wrapper EVA *Leasing – Term 48 months with no down payment TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimension: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop switch according to CE regulations Turntable always stops at the same home position Fall protection for film carriage Push buttons for machine power, start & stop functions to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL Dkedpsu Tk Etefx Aqxet All operational parameters adjustable via display F02 – Continuously adjustable turntable speed: 5–12 rpm Carriage speed up and down adjustable independently F03 – Carriage upward speed: 1.3 to 5.4 m/min F04 – Carriage downward speed: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Set pallet wrap height F62 – Ergonomic height for film replacement ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Single wrapping (only upwards or downwards) F01-3 – Manual wrapping F12 – Wrapping to a preset height (with deactivation of photoelectric sensor) F29 – Soft start cycle for application of edge protection Soft start to minimize film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options: Turntable 1650 mm Ramp Mounting frame Photoelectric sensor for black products Further units available ex-stock Ludwigsburg.

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. Djdpfx Aox Ta Nxeqxjkt MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.