Stanko 1K62 nakup rabljenega (51)

Stanje: rabljeno, Slotting head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke length: max. 60 mm Strokes: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing on machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Pgodod Dk A Ajpfx Aafju Centering diameter on the machine flange plate: 190 mm - Stroke length adjustable via eccentric adjustment - Drive is the same as for the regular vertical head, powered by the machine gearbox - Drive via driver, concentric to the centering diameter - Degree scale on the flange plate, continuously swivels +/- 45° - This slotting head is mounted in place of the standard vertical milling head / milling head (Installation instead of the vertical milling head, milling head) Weight: 42 kg Good condition Slotting head inventory no. 58166 and vertical milling head inventory no. 58164 from identical STANKO milling machines.

Stanje: rabljeno, Leto izdelave: 1992, Faceplate diameter: 1,120 mm Swing diameter: 1,250 mm Pgedpfx Aaov Anlhefou Turning height: 1,000 mm Workpiece weight: 4,000 kg Faceplate speeds: 1.25–315 rpm Cross travel of ram slide: 775 mm Vertical head swivel range: 45 degrees Stroke of the vertical ram: 700 mm Feed rates: 5.45–2,000 mm/min Total power requirement: 30 kW Machine weight: approx. 18 t Space requirements: approx. 2.7 × 2.9 × 4.1 m The machine was modernized and overhauled in 2014 for over €100,000. It is equipped with a digital positioning control system.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, skupna višina: 18.700 mm, skupna širina: 14.600 mm, skupna dolžina: 35.350 mm, dolžina brušenja: 320 mm, premer brusilnega koluta: 200 mm, Roll and Bore Grinding Machine. Manufacturer: STANKO (USSR) – Year 1989. Grinding diameter of bores: 50 - 300 mm. Maximum workpiece diameter: 560 mm. Distance between table and spindle: 340 mm. Maximum workpiece length: 320 mm. Upper diameter of the internal grinding head: 125; 100; 80 mm. Distance from the tip of the headstock center to the spindle flange: 150 - 400 mm. Pgodstzwzxspfx Aafou Grinding wheel size: 200 x 75 x 63 mm. Workpiece spindle speed range: 60 - 600 rpm. Table travel: 800 mm. Main motor power: 7.5 kW. Total required power: 14.63 kW. Machine dimensions (Length x Width x Height): 3535 x 1460 x 1870 mm. Machine weight: 6,400 kg.

Leto izdelave: 1970, Stanje: pripravljen za uporabo (rabljen), A total of four metalworking machines are available. 1) Carl Hurth LFV 3. 2) Hagen & Goebel HG-23N. 3) Stankoimport 2H55, year of manufacture: 1970. 4) Busch Maschinenfabrik FSV 5, year of manufacture: 1965. On-site inspection is possible. Individual sale is possible. Pgjdpfjwkuzqjx Aafou

Stanje: dober (rabljeno), Maks. premer: 560 mm Delovna dolžina: 3550 mm Maks. dolžina obdelovanca: 4000 mm Pgsdpfx Aev Dvzyoafju

Stanje: dober (rabljeno), Manufactured by: Stanko Tilting table Table size: 560x560 mm Travel: 400 mm Maximum cutting height: 240 mm Blade length: 3150 mm Pgjdpfsv S Ukvox Aafeu Adjustable speed

Stanje: pripravljen za uporabo (rabljen), Track width (mm): 250 Max. cutting height (mm): 100 Pgjdpfx Aajttr D Rsfeu Engine power (kW): 17

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, Drilling capacity Ø 50 mm, table size 1000x1640 mm, spindle taper MK-5, quill stroke 400 mm, quill diameter 80 mm, arm reach 1600 mm, max. installation height table to drill quill 1600 mm, 21 speeds 20-2000 rpm, geared transmission, motor 4 kW, dimensions 2700x1100x3430 mm, approx. 4800 kg, with coolant system, double cube 800x800x800 mm, hydraulic clamping. Podped Sw N Aofx Aafsgu

Stanje: potreben popravila (rabljeno), STANKO 2 A 554 Pedpetpu Tqjfx Aafogu The machine is in fully functional condition except for the clamping mechanism of the boom lift device, and is currently still in operation. The clamping mechanism needs to be assembled and adjusted, all parts are available. For safety reasons, the boom is secured with a tension strap; the clamp for the lift is currently in the clamped position. Technical data: - Drilling capacity: 60 mm - Arm reach: 1600 mm - Spindle taper: MT 5 - Spindle stroke: 390 mm - Spindle speeds: 20 steps, 20 - 2000 rpm - Forward/reverse rotation - Feed: 12 steps, 0.056 - 2.5 mm/rev - Drive: 400 V / 12.8 kW - Boom and drilling head clamping: electromechanical - Distance worktable to quill: - min. approx. 900 mm - max. approx. 1600 mm - Usable machine bed with 4 T-slots: 950 x 1700 mm - Coolant system - Cube table - Required space approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg

Stanje: dober (rabljeno), potovalna razdalja osi X: 2.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.200 mm, premer vretena: 110 mm, dolžina mize: 1.400 mm, širina mize: 1.600 mm, Table boring machine Pjdpeq E Ryfofx Aafsgu Heidenhain 407 control

Stanje: rabljeno, Leto izdelave: 1979, Grinding diameter: 630 mm Grinding length: 4,000 mm Centre height: / mm Machine weight approx. 32,000 kg STANKO cylindrical grinding machine 3M194 / 630 x 4,000 mm (MET.1405) Technical data: Pgodpfxjvm Dzao Aafou Grinding dimensions: 630 x 4,000 mm Weight: 32,000 kg HS code: 84602910 Discover the precision of the STANKO 3M194 cylindrical grinding machine with dimensions of 630 x 4,000 mm, reference MET.1405. Weighing 32,000 kg, this robust machine ensures stability and reliability for your machining operations. Classified under HS code 84602910, it meets international standards for quality and performance. The 3M194 impresses not only with its dimensions but also with innovative technology designed for superior results. Its reliable design and precise performance make this cylindrical grinder ideal for processing a wide range of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for businesses aiming for the highest quality standards in metalworking. Trust in proven STANKO technology to optimize your production processes and achieve first-class results. Invest in the future of your manufacturing with the STANKO 3M194 cylindrical grinding machine—the ideal combination of performance, precision and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your production requirements.

Stanje: pripravljen za uporabo (rabljen), zunanji premer vpenjalne glave: 1.400 mm, skupna višina: 4.100 mm, lastna masa: 20.000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat Maximale horizontale slag: 950 mm Maximale verticale slag: 700 mm Pedjv Sftzjpfx Aafjgu Horizontale schuifmaat Maximale horizontale slag: 630 mm Maximale verticale slag: 1000 mm Dwarsbalk Maximale slag: 660 mm Maximale draaidiameter (doorgang): 1600 mm Vermogen op de spil: 30 kW Aantal toerentallen: 5 > 2 Lengte: 3170 mm Breedte: 3030 mm

Stanje: dober (rabljeno), Maximum drilling diameter in steel: 50 mm Pgsdpfx Asttriwoafou Minimum arm reach (minimum distance between spindle axis and machine body): 450 mm Maximum arm reach (maximum distance between spindle axis and machine body): 1,600 mm Minimum spindle speed: 20 rpm Maximum spindle speed: 2,000 rpm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, LZ lathe, Manufacturer: SASTA STANKO, Type: SA562M, Year of manufacture: 1996 Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 1500 mm Spindle speeds: 16–2000 rpm Pgodpfx Asvkuausafju Spindle bore: 55 mm Chuck diameter: 250 mm (Forkardt), Toolholder: Multifix size C. Machine with rapid traverse on X and Z axis. Machine is in good overall condition. For further technical details, please refer to the data sheets.

Stanje: dober (rabljeno), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting: up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Pedjwpud Aopfx Aafegu Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Overhang: 500 mm Number of strokes: 3 – 38 m/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The data is supplied in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or terms of contract. We recommend verifying all critical information.

Stanje: dober (rabljeno), Leto izdelave: 1973, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.760 mm, stiskalna sila: 1.250 t, skupna dolžina: 6.400 mm, skupna širina: 4.365 mm, dolžina mize: 820 mm, obratovalni tlak: 7 letvica, širina mize: 260 mm, globina grla: 700 mm, skupna masa: 135.000 kg, pritisk: 7 letvica, hod: 220 mm, Nazivna sila prebijača: 12.500 kN / 1.250 ton Maksimalni premer obdelovanca: 140 mm Maksimalni premer prebijene prirobnice: 180 mm Pedpfeuby N Dox Aafjgu Hod prebijača: 460 mm Neprekinjeno število praznih hodov na minuto: 35 Moč elektromotorja: 75 kW Skupne mere: - Dolžina-Širina: 6.400 mm - Spredaj-Zadaj: 4.365 mm - Višina: 3.760 mm Skupna masa, približno: 135.000 kg.

Stanje: novo, Leto izdelave: 2025, CNC control optionally Fagor 8055TC (Siemens/Heidenhain*) Delivery time approx. 7-8 months Including standard accessories: - Complete electrical equipment 24/230/400V, German manufacture (CE standard) - Machine lamp 24 Volt - Coolant system - 4-way tool post incl. cross slide (or 4-way turret*) - 4-jaw faceplate 1250mm - Safety cabin/machine enclosure - Central lubrication system by SKF/Vogel - 1 set of technical documentation, including: -- Operating manual -- Electrical circuit diagram -- Programming manual -- Declaration of conformity (CE) - Machine painting: combination RAL 7035 and RAL 5015 Technical data Workpiece diameter over bed: 1250mm Machining diameter over bed: 1250mm Machining diameter over slide: 900mm Distance between centers: 8000mm Max. workpiece weight: 16,000 kg Spindle nose according to DIN 55026: Size 15 Spindle bore: 128mm Spindle internal taper (metric): 140 Main motor power: 37/55 kW Spindle speed range: 5-500 rpm Speed ranges (automatic-hydraulic), incl. stepless regulation within gears: 4 Max. spindle torque: 10,500 Nm Podpfxsdag Svj Aafegu Machine dimensions: Total length: 11,200 mm Width: 2,400 mm Height: 2,000 mm Machine weight: 17,750 kg * Option

Stanje: rabljeno, Spherical Roller Bearing - Bearing type: Spherical Roller Bearing - Bore: Ø 110 mm Pgedob A Iq Sopfx Aafju - Outer diameter: 200 mm - Width: 53 mm - Weight: 7.5 kg

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 10.000 kg, dolžina brušenja: 4.000 mm, premer brusilnega koluta: 750 mm, skupna širina: 4.180 mm, skupna dolžina: 13.440 mm, skupna višina: 2.455 mm, premer brušenja: 800 mm, skupna masa: 38.700 kg, Cylindrical Grinder STANKO 3M196 Year of manufacture: 1981. Maximum grinding diameter: 800 mm Maximum workpiece length: 4,000 mm Grinding diameter range: 80 – 800 mm Pgsdpfot I Dppox Aafju Maximum grinding diameter without steady rest: 800 mm Maximum grinding diameter in steady rest: 450 mm Centre height above table: 410 mm Maximum workpiece weight between centres: 10,000 kg Grinding wheel dimensions: ⌀750 x 100 mm Grinding speed: 50 m/s Main motor power: 30 kW Workpiece rotation speed: 5 – 80 rpm Tailstock quill travel: 100 mm Machine dimensions (Length x Width x Height): 13,440 x 4,180 x 2,455 mm Machine weight: 38,700 kg

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Reach: 410 mm Machine dimensions (approx. LxWxH): 1.15 m x 0.8 m x 2.0 m Pgedpfju Niu Uex Aafeu Vertical bandsaw with bandsaw blade welding device The table is tiltable.

Stanje: novo, Leto izdelave: 2025, Machine in AS-NEW condition! Geometry acceptance as per DIN8609 Psdpfx Aecht Tneafogu 12-month warranty covering all damages Control: conventional/PLC Siemens faceplate control 4-axis digital display: Fagor/ACU-RITE or Heidenhain Complete electrical equipment 230/400V, 50Hz, German make, CE compliant Technical data: Max. workpiece dimensions: - Diameter (mm): 3,200 - Height (mm): 1,600 (up to 2,600 possible*) Max. workpiece weight (kg): 16,000 Faceplate diameter (mm): 2,800 Max. stroke length: - Horizontal (mm): 1,720 - Vertical (mm): 1,200 Number of faceplate speed stages: 18 Faceplate rotational speeds PLC Siemens or stepless (2 stages) Lenze control (rpm): 1.6–63 / 0–80 Cross slide feed range: 18 stages Crossrail traverse speed (mm/min): 360 Max. rapid traverse of support (mm/min): 2,000 Max. faceplate torque (kN/m): 67 Main drive power (kW): 55/75 Dimensions (LxWxH, mm): 5,490 x 7,075 x 5,100 Weight (kg): 43,000

Stanje: rabljeno, Leto izdelave: 1981, Données techniques : Diamètre de rectification : 240 mm Longueur de rectification : 700 mm Hauteur de pointe : 125 mm Pgedeu Ng Avjpfx Aafsu Longueur de la table : 1525 mm (pivotante) Distance broche de rectification – table min./max. : 225/410 mm Plage de vitesse de la meule : 1590 tr/min Diamètre de la meule (neuve) : 600 mm Diamètre de la meule (usée) : 450 mm Vitesse de coupe : 50 m/s Puissance totale requise : 13 kW Poids de la machine env. : 5,5 t Encombrement env. : L :2,8 x l :2,2 x H :1,8 m RECTIFIEUSE CYLINDRIQUE SEMI-AUTOMATIQUE Autres données : - Réglage de la poupée de rectification : 185 mm - Avance de la poupée de rectification : 0,001 à 0,05 mm/min en continu - Vitesse de broche pièce : 50 à 500 tr/min en continu Machine équipée de : - Fourreau à rappel hydraulique - Dispositif de refroidissement - Dispositif de dressage - Dispositif d’équilibrage de meule - Dispositif de déplacement transversal poupée de rectification - Réglage hydraulique de la table, table supérieure pivotante i.D.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, TECHNICAL DATA: Machining diameter: 3200 mm Pjdpfx Aolin Rceafegu Max. workpiece height: 1600 mm Max. workpiece weight: 16,000 kg Faceplate diameter: 2800 mm Faceplate speed range, 2 steps: 0-80 rpm Max. faceplate torque: 67,000 Nm Main drive power: 75 kW EQUIPMENT: - 2 turrets (double slide, 2 channels) - Linear measuring systems - 3-position tool holder - Telescopic covers - Central lubrication system SKF/VOGEL - Complete electrical equipment 230/400V, 50Hz, Made in Germany, CE compliant 12-month warranty on all mechanical and electrical defects! OPTIONS: - Machine enclosure included - Chip conveyor on request - Coolant system preparation on request CONTROL: FAGOR 8055TC MISCELLANEOUS: Geometry acceptance according to DIN 8609-3 CE declaration of conformity Delivery time: 2-3 months or by arrangement

Stanje: rabljeno, Technical details: Pgsdpfewa Rzljx Aafou Drilling capacity in steel (diameter): 32 mm Throat depth: 275–800 mm Maximum workpiece height: 1,040 mm Horizontal travel of drill slide: 180 mm Vertical adjustment of arm: 800 mm Distance table – spindle nose: max. 1,040 mm / min. 350 mm Spindle taper: MT 4 Speed range – stepless: 63 – 1,600 rpm / 8-step Swivel range of arm: 360° Feed rates: 0.125 / 0.200 / 0.315 mm/rev Column diameter: 180 mm Clamping area of base plate: 730 x 500 mm Approx. machine weight: 1.2 t Approx. machine dimensions (LxWxH): 1.75 x 0.56 x 1.97 m Coolant system with pump and supply to spindle

Stanje: rabljeno, Technical details: Weight: 150 kg Dimensions: L:280 x W:240 x H:180 mm / per clamping claw For sale are these 4x clamping claws (Spannpratzen). Application: Workpiece clamping for turning and drilling operations Cast steel construction Workpiece holding area: Clamping surface WxH: 70 x 65 mm, for internal and external clamping, clamping travel 250 mm Base mounting: Surface L x W: 280 x 240 mm, 4x clamping bolts M24 Pgjdpfxou N E Azo Aafsu Includes: 4x T-slot bolts per clamping claw, and socket wrench for 24 mm square