Skobljanje Stroj nakup rabljenega (26.518)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 33.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, višina obdelovanca (maks.): 60 mm, delovna višina: 950 mm, model krmilnika: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness of 22 mm: 55 mm Minimum working width with workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edging material, roll: 0.3 - 3 mm Rbjdpfx Asyc Sr Aed Tjt Maximum edge cross-section for PVC: 135 mm² Maximum edge cross-section for veneer: 100 mm² Maximum roll diameter: 830 mm MACHINE DETAILS Control: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine base for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive when feed is stopped Glue pot lifting mechanism when feed is stopped Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed guard Feed unit with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data acquisition Electric height adjustment Fixed stop side on the left Workpiece transport device Top pressure Separating agent spraying unit Jointing cutter unit, 2 x 3 kW Glue application unit A20 Basic for roll material up to 3 mm and strip material up to 20 mm, with melt unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Lubricant spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contouring milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with infinitely variable axis Multi trimming unit MN21, automatic Finishing unit FA11, with trimming unit, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Space for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging are not possible by the seller.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 Rbodeycqc Topfx Ad Tet FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Stanje: rabljeno, Kündig Brilliant 1 1100 Cd-Lack Rodpfx Aoyftuwjd Tjbt Kakovosten izdelek iz Švice KONSTANTNA MIZA / avtomatska nastavitev glave Širokopasovni kalibrirni in fini brusilni avtomat Kombinirana enota kontaktnega valja in brusne blazine z elektronsko vodenim segmentnim brusilnim čevljem DIAGONALNO / celotna brusilna enota je nagibna za 10° Nivo kontaktnega valja je brezstopenjsko nastavljiv glede na granulacijo Priključna moč cca 14 kW Delovna širina 1100 mm Paket za brušenje laka: - nihajoče odvijanje traku - brezstopenjska nastavitev hitrosti brusnega traku - podajalna hitrost 3–15 m/min, brezstopenjsko nastavljiva Stabilna vakuumska miza z lakiranim tepihom, ventilator integriran v ohišju stroja Nastavitev debeline po celotni delovni širini ENORMATIC hitro nastavljanje s sprožitvijo podajanja (za dolge obdelovance) Upravljanje prek zaslona na dotik za avtomatizacijo in vodenje vseh delovnih programov Vstopna in izstopna miza z valjčnimi nosilci Stroj JE PREGLEDAN V DELAVNICI in je V ODLIČNEM STANJU Na zalogi Lieboch

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Rbjdpsyfn Ursfx Ad Tot Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Rbodpfjyfn Tnex Ad Tot Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Accura 1556 Premium popolnoma opremljen, sodoben robni lepilni stroj Prva dostava 2021 Rbsdpsyfndaefx Ad Tet Stroj je v ODLIČNEM STANJU Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Na prodaj je rabljeni kombinirani stroj Robland X-310 z debelino oblanja do 230 mm. Stroj je v zelo dobrem stanju, strokovno prenovljen in pregledan s strani našega tehničnega osebja (popolnoma funkcionalen). Tehnični podatki: - 5-v-1 kombinirani stroj - Širina skobljanja/debelinjenja: 310 mm - 3-nožni valj (noži v pasovih) - Debelina oblanja: 4–230 mm - Krožna žaga z nagibom 90–45° - Litoželezna pomična miza z kotnim prislonom - Frézka fiksna - 2 hitrosti rezkanja: 3000/6000 obr/min - 3 motorji po 2,2 kW / 3 KM Rbedpfx Ajyfv Tpod Tst - Prevozna naprava Kombinirani stroj se nahaja v kraju A-8561 Söding in si ga je mogoče ogledati kadarkoli v času naših odpiralnih ur. Vmesna prodaja pridržana! Sorodni izrazi: skobeljni stroj, debelinka, debelinsko oblanje, Felder, rezkalni stroj, krožna žaga, žaga Referenca: R-Z1720

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Raboteuse dégauchisseuse FELDER / HAMMER Largeur de rabotage : 410 mm Puissance du moteur : 4,0 kW, 400 V, 50 Hz Arbre porte-couteaux hélicoïdal Silent-POWER Nombre de couteaux : 62 Prise de passe maximale : 4 mm Levier de réglage pour profondeur de passe Longueur de la table de dégauchissage : 1800 mm Rjdpjydnptsfx Ad Tjbt Butée inclinable 90°–45°, anodisée Dimensions butée : 150 x 1100 mm Bouche d’aspiration Ø 120 mm Arrêt d’urgence Prête à brancher avec inverseur de phase Conforme CE Dimensions (env.) L x l x H = 1900 x 800 x 1000 mm Poids (env.) : 340 kg Remarques pour machines d’occasion : • Sous réserve d’erreurs dans les données techniques et vente préalable. • Les prix indiqués s’entendent départ site – hors chargement ! • Les machines sont nettoyées et testées en fonctionnement. • Toutes les machines sont vendues dans l’état où elles se trouvent sans aucune garantie. L’acheteur a la possibilité de venir inspecter les machines sur place. • Les accords particuliers ne sont valables que par écrit. (Nous ne répondons qu’aux demandes avec coordonnées complètes et numéro de téléphone !)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, H+K Four-Sided Planer and Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Motor upper spindle: 5.0 kW Motor lower spindle: 4.0 kW Motor left spindle: 4.0 kW, automatic floating head Motor right spindle: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed Feed motor power: 0.75 kW Total connected load approx. 18.0 kW, 400 V, 50 Hz Extraction connections: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3370 x 1330 x 1500 mm Weight approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Non-driven outfeed roller Automatic centralized lubrication Rbedpfxoydmaws Ad Tst Automatic star-delta starter INCLUDES 4 reversible-knife cutterheads INCLUDES operating manual & wiring diagram CE-certified All ball bearings NEW All V-belts NEW Note on used machines: • Technical data may be subject to errors and prior sale. • Prices quoted are ex works - free loading at location! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected without any guarantee or warranty claims. Potential buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will be answered only if you provide your address and phone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Edge Banding Machine SCM Model Olympic 500 HP 'T-ER2' Type of offer: LEASE RETURN, Used Machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL INFORMATION: A complete and versatile edge banding machine designed for small and medium-sized businesses, capable of processing a wide variety of materials to a high quality standard in a compact footprint. The SCM Olympic 500 features electronic adjustment and enables processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the Human-Machine Interface (HMI) • Maestro connect: prepared for later installation without needing a gateway • 2-radius processing, chamfering on all units with multi-edge tooling - Fine trimming and radius scraper unit, Radius = 1 mm - Fine trimming and radius scraper unit, Radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed “SAV€NERGY” KIT Internal lighting for the enclosure and glue application area “Nesting” tracing roller KIT Edge separating agent spraying unit "AAR" Spraying unit for final edge finishing Spraying unit for sensitive edges Jointing cutter unit "RT-V1" “EASY SIZE” device – electronic quick adjustment for the jointing cutter unit Glue unit "VC-VM" Rjdoq A Tyzopfx Ad Tjbt SGP glue pot for EVA & PU, including quick-change device Ceramic lamp with infrared rays for preheating workpieces Electronic positioning of all pressure rollers End trimming unit "K-2 Radius" Chamfering and radius trimming unit "R-HP Multiedge 2R" Corner rounding unit "Round 2-A Multiedge 1R" 'MULTIEDGE 3' KIT for automatic switching between straight/R/R modes, for the “Round 2-A Multiedge 1R” unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit "RC-N" Buffing unit "SP-V" MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 12.800 h, številka stroja/vozila: 45561238, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, vrsta laserja: CO₂ laser, laserske ure: 12.800 h, laserska moč: 2.000 W, najv. debelina jeklene pločevine: 10 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, maks. debelina aluminijaste pločevine: 8 mm, moč: 2 kW (2,72 KM), vrsta hlajenja: voda, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje prahu, Working area 2520×1550×300 mm Table load 330 kg Ball-screw drives Rsdpfx Adsxgmnfj Tebt Machine dims 5745×2630×2789 mm Weight 7.5 t Selling due to buying a new, identical one

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: Rjdpfx Aoych Igod Tjbt • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Rbjdpeychqzofx Ad Tet Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Rbjdpfsycg U Esx Ad Tjt Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Odlično ohranjen stroj, malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Rbsdpfx Asvuxihsd Tjt

Stanje: rabljeno, • Holz Her Auriga 1308 XL FÜ + PU • Kompakte Bauweise – Kantenstärke 0,4–8 mm • SPS-Bildschirmsteuerung Edge-Control PPC 231 Touchscreen • Vorfräsaggregat zum Anarbeiten vor dem Verleimteil • Vollautomatisches Kantenmagazin für Rollen- und Streifenmaterial • Kleberauftragsstation GLU JET Patronen + PUR-Verleimung • Kleberauftragung mittels Düsentechnik • Werkstückhöhe 6–65 mm • Automatische Leimhöhenverstellung • Andruckwerk 1912-3 pneumatisch • Kappaggregat 1918 pneumatisch für Rollen- und Streifenmaterial bis 8 mm Kantenstärke • Mit pneumatischer Verstellung der Kappsägen von 0–10° für Schrägschnitte • Fräsaggregat 1827 MOT 4, bündiges Fräsen bis 8 mm, Radienfräsen, Fasefräsen – 15°, 1827 MOT NC-Achsen über Steuerpult • Formfräsaggregat 1832 pneumatisch, Abrunden der Ecken bis 3 mm Kantenstärke im Durchlauf • Ziehklingenaggregat 1929 MOT2 für Fasen und Radien mit 2 Ziehklingenträgern, NC-Achsen über Steuerpult • Flächenziehklingenaggregat – Finish • Schwabbelaggregat – Poliereinheit • Sprüheinrichtung im Ein- und Auslaufbereich • Komplette Werkzeugausstattung inklusive Rsdpfoycq Dwex Ad Tobt • Erstauslieferung 2013 • Maschine ist FUNKTIONSGEPRÜFT und in TOP-ZUSTAND • Ab Lager Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, vhodni tok: 24 A, Odlično ohranjen pik injektor - komplet linija steaker ( typ TDC - 400), hladilnik solnice in filter solnice, malo rabljen, popolnoma funkcionalen. 3 fazni priklop, 12 kW, 24 A, 380 V. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Redjyfgwlepfx Ad Tsbt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, vhodni tok: 2 A, Odlično ohranjen stroj, malo rabljen 3 fazni elektro motor, potrebna majhne amperaža za priklop 2 A. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Rjdpfx Aoyfgtyjd Tjbt

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 210 kW (285,52 KM), vrsta goriva: dizel, barva: rumena, velikost pnevmatike: 710x26,5, stanje pnevmatik: 40 odstotek, Leto izdelave: 2016, obratovalne ure: 16.600 h, številka stroja/vozila: A080191, Oprema: dodatne luči, kabina, klimatska naprava, osvetlitev, Ponsse Buffalo 8W forvarder Kran K100, grabilnik Grippen 035 Centralno mazanje LED osvetlitev 2 prejšnja lastnika Rbsdpfx Aewd E Tked Tet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HOP20170043, skupna širina: 1.490 mm, skupna dolžina: 820 mm, skupna višina: 1.345 mm, Industrijski dvokomorni vakuumski stroj namenjen za hitro in učinkovito pakiranje hrane in neprehrambenih izdelkov v komercialnih okoljih. Stroj je v odličnem stanju, takoj pripraven za uporabo. Omogoča MAP pakiranje, kar je bila tudi njegova glavna namembnost – pakiranje suhega sadja v MAP embalaži. Možno je vakuumirati ali pakirati v MAP vrečke katerikoli izdelek. Nima bazena za termično skrčenje. Kapaciteta črpalke je 63 m³/h (Busch). Redpfx Adoyf A E Ej Tjbt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, Holz-Her robna lepilka LUMINA 1380 Multi Redpjx E A Diefx Ad Tsbt PUR & EVA lepilo (do 60 mm) + NIR agregat / laserski robovi do 45 mm, kot menjalna postaja Predrezkanje IntelliSet – korekcija orodja fa.s.t. – nastavljanje v prekinitvi iTronic – nadzor pritiska in količine lepila Popolna motorizacija vseh agregatov Multifunkcijsko rezkanje – radij 1,3 mm (2x) in 2 mm (2x) Razpršilne naprave in več... Stroj je trenutno obnovljen v tovarni v Voitsbergu, Avstrija. Dostavo, montažo in uvajanje v delo s strojem lahko izvedemo neposredno mi za doplačilo. Stroj se trenutno nahaja v našem skladišču za odpremo v Gratweinu, Avstrija. V primeru neskladja med nemškim in prevedenim besedilom velja izključno nemška verzija. Naše splošne pogoje najdete na naši spletni strani holzher.de/de/agb.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.920 mm, višina obdelovanca (maks.): 60 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high gloss and super matt finishes! Rbodpfsx Emf Dex Ad Tet One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Motorized pressure bridge with top belt drive Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 48 mm, višina obdelovanca (maks.): 60 mm, trajanje garancije: 6 meseci, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, HOLZ-HER CNC Dowel Drilling & Inserting Machine POWER-PIN 7605 Workpiece length: min. 60 mm, max. unlimited (limited when using positioning pins) Software: CAPMUS V7x POWER-PIN Continuous LED strip for easy orientation and status indication DA102 dowel inserting unit for pre-glued dowels as well as for untreated dowels in combination with PVA glue Rbodeyf Eylepfx Ad Tjt LS2 glue system with electronic nozzle needle monitoring ECO MODE for energy-efficient operation 21.5" touchscreen MOT3 package – motorized adjustment of drilling depth 2D barcode scanner The POWER-PIN dowel machine is suitable both as a standard dowel machine and as the perfect addition to, for example, nesting or console machines. From cabinet carcasses to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip constantly displays machine status and assists the operator by indicating the correct insertion position of the workpiece. The integrated barcode scanner can read, for example, DataMatrix codes containing all processing information for the workpiece. Drilling positions and depths are automatically set and approached by the machine – for maximum precision and efficient workflows. Delivery, installation, and operator training for the machine can be arranged directly through us for an additional fee. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version is authoritative. Our Terms and Conditions (AGB) can be found on our website at holzher.de/de/agb.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 Redpfx Adsx Uzblj Tebt 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6Kw 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 MAKE: THALES 10. FILTERS 8 PCS. Machine: T3030 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5KW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5KW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5KW

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Automatische Siebdruckmaschine Siebdruckmaschine INO Print SA2 ist eine modern konstruierte Siebdruckmaschine zum Bedrucken verschiedener Materialien auf einem Vakuumtisch. Einfache Bedienung, schneller Werkzeugwechsel und eine feine Regulierung aller druckrelevanten Parameter sind nur einige ihrer Vorteile. Vorteile und Nutzen der INO Print SA2: • Einfache Handhabung, sehr kurze Rüstzeiten • Hohe Präzision • Optische Passergenauigkeit – Möglichkeit zur Kombination mit digitalen Technologien • Automatisches Abnahmegerät erhöht die Produktivität um bis zu 30 % und verbessert die Druckqualität. Zudem erleichtert es die Bedienung: Der Bediener muss lediglich das zu bedruckende Material einlegen. • Die Abnahme kann an jeder Position des Vakuumtisches erfolgen Bedruckung verschiedenster Materialien wie Papier, Folien, Karton etc. • Ergonomisches Design erfordert minimalen Kraftaufwand des Bedieners • Schublade für Druckgut vereinfacht das Beladen Rbodpfex Nv Nmex Ad Tst • Das Sieb bleibt stets in horizontaler Position, dadurch kein Tintenablauf hinter dem Rakel • Einfache Farbnachfüllung ins Sieb aus sitzender Position möglich • Pneumatische Halterung für Rakel und Flutrakel • Servoantrieb spart kostenintensive Druckluft • Maximale Objekt-/Materialhöhe: 400 mm Maximales Druckformat: 700 x 500 mm Maximale Siebgröße: 1100 x 900 mm Materialstärke: bis 400 mm (bei manueller Entnahme) Axiale Verstellung x und y: ±10 mm, z: 100 mm Siebrückzug zum Beladen: einstellbar bis 450 mm Luftanschluss: 6 bar