Sistem Z Vodnim Curkom nakup rabljenega (47.294)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Technical data: Operating pressure: 6–10 bar, dry, filtered air Compressed air connection: ø 10–12 mm Maximum delivery pressure: 5 bar Delivery rate: 60 kg/h Abrasive types: Dry garnet sand 60–200 mesh Compressed air consumption: Max. 0.5 m³/h at 4 bar operating pressure Djdpfx Aou Rb D Reg Nsku Weight: 200 kg (empty) Electrical connection: AC 240 V / 50 Hz / max. 20 A Dimensions (H x W x D): 2350 x 860 x 610 mm

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 18.600 h, Funkcionalnost: popolnoma funkcionalen, tlak vode: 4.000 letvica, Vodni rezač FLOW MACH 3 Godina proizvodnje: 2013 Radna površina: 3000 x 2000 mm Dedpowmcmtefx Ag Noku Radni sati: 18.600 Prednost stroja DWJ – automatska kompenzacija okomitosti rezanja Dostupnost: lipanj Lokacija: Hrvatska Paritet: EXW Belišće

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, pritisk: 4.000 letvica, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64 Bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Oil capacity: 130 l Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Container capacity: approx. 1,400 kg Delivery rate: 2 kg/min Weight: 1,500 kg Dsdpfjwcqi Uex Ag Nsku MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Pump operating hours: 1,200 h Electrical connection Connection: 400 V Total power requirement: 37.0 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 4.974 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016K000217721, Dear Sir or Madam, All details regarding the system can be found in the photos and PDF documents. The system is still in operation and can be inspected at our site by prior appointment. Dksdpfxoumbyco Ag Neu Should you require any further information, please do not hesitate to contact us.

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 23.504 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W371, Bystronic 4-head system including two hydraulic pumps and exchange table Working area: 3,000 x 1,500 mm Dkodpfx Aewzwgwjg Neu All heads are fully functional Including drilling axis Conversion from scraper conveyor to sludge removal system Further information available by phone upon request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, MILESTONE S 2040 very good condition – only approx. 100 operating hours Axis travel: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 250 mm Equipment: - 1x 5-axis cutting head including automatic angle compensation - Height sensing including anti-collision monitoring - IGEMS software - Automatic de-sludging via chain conveyor - Abrasive tank and automatic abrasive dosing High-pressure pump Jetpower EVO Total power consumption: 45 kW Power supply: 400 V +/- 5% / 50 Hz Max. water pressure: 4,100 bar Water flow rate: max. 5.6 l/min Djdjwd Ih Depfx Ag Neku Including installation, training, and warranty

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,025 mm, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 310 mm, natančnost pozicioniranja: 0,025 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, maks. debelina aluminijaste pločevine: 300 mm, obratovalna hitrost: 15.000 mm/s, pritisk: 4.150 letvica, trajanje garancije: 24 meseci, hitrost rezanja: 15.000 mm/min, največja hitrost vožnje: 20.000 mm/min, obremenitev mize: 1.200 kg, leto zadnje generalne obnove: 2025, višina izdelka (maks.): 300 mm, Brand new waterjet cutting machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The X-JET modern, fully professional waterjet cutter is designed for the most demanding customers. Leveraging the latest technologies and a rigid frame structure, this machine delivers outstanding cutting quality, high precision, and long-lasting durability. 🔹 Key features: Working area (3 axes): 2000 x 4000 mm X/Y feed rate: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Maximum table load: 1,200 kg/m² Enclosed moving units + servo drives Automatic central lubrication Advanced CNC control software + IGEMS CAD/CAM 2D/3D Optional equipment: 💥 5X cutting head: Taper compensation and beveling up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond head Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent systems: 12 MP camera Automatic tool angle setting system Precision 5-axis cutting calibration system 💦 High-pressure pump: Maximum working pressure: 4,150 bar (60,000 psi) Constant working pressure: 3,792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touch screen control panel Dodpfx Agov Tmxue Noku ⚙️ Additional equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Economical sludge extractor – 170 l/min 📍 Made in Poland – a local product with global capabilities. 💬 Contact us! We will gladly provide full technical documentation and prepare an individual offer. Custom dimensions and configurations available on request *(Sample images, offer applies to the device with 1.5x3m working area, 3-axis)*

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 1.934 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 200 mm, tlak vode: 3.600 letvica, TECHNICAL DETAILS Operating hours: 1,900 h X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 200 mm Water pressure: 3,600 bar EQUIPMENT Djdpfevfm T Nex Ag Noku - Two cutting heads for simultaneous machining - Drilling head for 2 mm starting holes (e.g., MAX plates) - Gluing gun for small parts - Sludge removal system in BIG pack - Bysoft6 software

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 13.727 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.8/60, natančnost pozicioniranja: 0,05 mm, pritisk: 4.130 letvica, obratovalni tlak: 4.130 letvica, hitrost rezanja: 12.000 mm/min, skupna masa: 2.000 kg, CNC Opal Waterjet Cutting Machine – 4130 bar Waterjet System | PTV-JET 37 kW High-pressure pump with accessories for precision waterjet cutting machines Model: Opal Waterjet Year of manufacture: 2005 Isbq N Eewt Ah Rj E Rdjau Total operating hours: 13,727 h Included equipment: - High-pressure pump PTV-JET 37 kW (working pressure: 4130 bar) - Oil cooler - Basic high-pressure fittings - High-pressure gauge - High-pressure valves: manual and pneumatic - Abrasive dosing unit - Abrasive pressure transport system - CNC control panel for machine operation - Dual cutting head with diamond orifice Dedpewt Ah Rofx Ag Njku Offer does not include: - Work table - Cutting tank Technical data: - Working pressure: 4130 bar - Pump motor power: 37 kW - Maximum water flow: 3.79 l/min - Working width: 1000 – 4500 mm - Working length: 1000 – 10,000 mm - Maximum cutting speed: 12,000 mm/min - Positioning accuracy: ±0.05 mm - Unit dimensions: approx. 3 m x 2 m - Net weight: approx. 2000 kg Applications and benefits: - Material cutting: • All types of steel and alloys • Temperature-sensitive materials (plastics, composites) • Multi-layer and difficult-to-machine materials • Natural materials (marble, granite), glass, ceramics - No thermal effect on the processed material - Precise CNC control over cutting and pump operation - Environmentally friendly technology – no emission of harmful substances - Possibility of integration with existing infrastructure (table, cutting head) Additional information: - Machine decommissioned from production, fully assembled and ready for shipment - Complete technical documentation available - Location: Tarnowskie Góry, Poland - Device demonstration possible upon prior arrangement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 11.066 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 305 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, dolžina mize: 4.100 mm, širina mize: 2.100 mm, pritisk: 4.150 letvica, hitro pomikanje X-os: 17 m/min, hitri pomik os Y: 17 m/min, višina mize: 900 mm, moč: 37 kW (50,31 KM), Oprema: varnostna svetlobna zapora, Flow Mach 500 4020 - Material support area • X-axis approx. 4,100 mm • Y-axis approx. 2,100 mm - Cutting area • X-axis approx. 4,000 mm • Y-axis approx. 2,000 mm - Z-axis precision, programmable, servo-driven, stroke range 305 mm Dkedpfx Asvvmi Esg Neu - Cutting head PASER 4 Dynamic Waterjet XD Technology • Bevel and 3D cuts up to 55° without angular errors • Cuts 2D and 3D components with tight tolerances at high speeds • 5-axis kinematic system - Pump Intensifire HyperJet 94i-D • 6,500 bar, 75 kW (100 HP), 4.92 l/min • Pump cooling system • Tool kit for the pump - Control FlowMaster + FlowExpert - Material support system + tank • Stainless steel construction • Water level regulation • Prepared for abrasive sludge removal system • Easily replaceable stainless steel slats as workpiece supports - Abrasive storage and feed system PASER CF 900 • Abrasive storage container 425 kg - Flow UltraPierce (piercing of composites, glass, stone) - Machine under power, operational - Optionally, the complete running waterjet cutting service company in Poland is also for sale (including real estate, machinery fleet with 3 Flow waterjet cutting systems, customer portfolio with 160 regular business clients, complete company equipment)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Der EchoJet ist die erste vollständig geschlossene Wasserstrahlschneidlösung ihrer Art, die entwickelt wurde, um die Effizienz des Bedieners zu steigern und gleichzeitig die Umgebung vor Wasser und Abrasivstoffen zu schützen. Das geschlossene, kompakte Design orientiert sich am Erscheinungsbild und Handling traditioneller Werkzeugmaschinen, bietet dabei jedoch die Flexibilität, praktisch jedes Material und jede Form zu schneiden. Das System verfügt über eine einzigartige Portalbauweise, die den Arbeitsbereich optimal ausnutzt. Besonderheiten:  Vollintegrierte Einhausung ermöglicht einen leisen und sauberen Betrieb  Einzigartiges Portaldesign gewährleistet eine ausgezeichnete Zugänglichkeit des Arbeitstisches bei gleichzeitig schneller und präziser Achsbewegung  Führende Antriebs-, Motoren- und Elektroniksysteme aus der Branche in Kombination mit Flows Ultra-Hochdrucktechnologie  Integrierte Innenraumbeleuchtung verbessert Sichtbarkeit und Sicherheit  Alle Maschinenkomponenten werden über ein mobiles Bedienpanel gesteuert, das den gesamten Arbeitsbereich bequem abdeckt  Industrielles PC-System sorgt für schnelle und leistungsstarke Prozesse auch bei Umgebungstemperaturen bis 55°C und verfügt über vollen IP66-Spritzwasserschutz  Werksseitig per Laser kalibriert und beim Kunden mit dynamischem Kreisformtest (Ball-Bar-Test) überprüft, um die Genauigkeit zu gewährleisten  Einteiliges Design und kompakte Bauweise sparen Stellfläche, ermöglichen eine schnelle Inbetriebnahme und lassen sich später problemlos umplatzieren. Dkjdpfxsv Szxms Ag Nsu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, obratovalne ure: 700 h, CMS Tecnocut Easyline As new, only approx. 700 operating hours Cutting Area / Axis Travel: X-Axis: 2,000 mm Y-Axis: 4,000 mm Z-Axis: 150 mm C-Axis: 630° B-Axis: +/- 60° Included Equipment: - 5-axis cutting head incl. angle compensation - Abrasive dosing and vacuum monitoring - Height sensing - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical Data Total power consumption: 34 kW at 5 l/min Power supply: 400 V +/- 5% / 50 Hz Max. water pressure: 4,150 bar Pressure vessel: 1.2 l Water flow rate: max. 5 l/min Djdpjtq Eh Dsfx Ag Nsku Nozzle opening diameter: max. 0.40 mm The pressure intensifier with direct-drive servomotor offers the following advantages: + Energy-efficient + Proportional power consumption + No maintenance-prone hydraulics + < 75 dBA + Low maintenance thanks to 60% fewer structural components + Integrated water pump + Long-life seals Including installation and 12-month warranty!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 7.100 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 178 mm, dolžina mize: 3.000 mm, širina mize: 2.000 mm, hitro pomikanje X-os: 12.700 m/min, hitri pomik os Y: 12.700 m/min, hitri pomik na osi Z: 12.700 m/min, Naprodaj: FLOW MACH3 3020b vodni rezalnik v odličnem tehničnem stanju. Stroj je bil profesionalno upravljan in redno servisiran – na voljo je natančno vodena servisna knjiga, ki jo je skrbno vodil operater. Tehnične specifikacije: - Leto izdelave: 2013 - Datum zagona: konec leta 2014 Djdpfx Aow Np Ibsg Nsku - Skupaj obratovalnih ur: 7.100 h - Delovno območje: 3.000 × 2.000 mm - Visokotlačna črpalka: Flow Hyplex Prime 30HP 4140 Bar - Stanje: popolnoma servisiran, pripravljen za takojšnje delovanje Možnost testnih rezov za resne kupce. Priložena oprema: - Sistem za odstranjevanje mulja z ločenim vozičkom za mulj - Dozator abraziva - Posebno orodje za demontažo cilindrov črpalke (FLOW hidravlično orodje) - Več rezervnih delov Stroj je popolnoma delujoč, z nizkim številom obratovalnih ur ter pripravljen za takojšnjo uporabo. Idealna izbira za podjetja, ki iščejo zanesljiv vodni rezalni sistem z velikim delovnim območjem in popolno opremljenostjo.

Stanje: novo, The Opal Waterjet cutting system is the solution for exceptionally high demands on precision without thermal influence, even with complex contours. Dkjdpfx Asfz Di Aeg Nsu Thanks to an extensive range of equipment options and a powerful high-pressure pump, the cutting system is suitable for virtually all available materials, such as steel, stone, wood, etc., up to a material thickness of 250 mm. The optionally available ProX 3D cutting head provides additional capabilities in 3D machining. Furthermore, we offer a wide range of additional equipment, such as sludge removal systems. Key Features • Versatile applications • No slag formation during cutting, minimizing post-processing effort • Optionally pure water or abrasive cutting • Installation of up to 4 cutting heads for parallel cuts • Pump capacity individually adjustable to the specific application Technical Data Drive Servo AC Available working widths 1,000 - 6,000 mm Available working lengths 1,000 - 12,000 mm Cutting height 2D 0.5 - 250 mm Cutting height ProX 3D 0.5 - 150 mm Positioning speed 20,000 mm/min Safety module DIN-EN 13850 Electrical components DIN-EN 81346 Operating ambient temperature +5 °C to 45 °C Operating humidity max. 90%

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.500 h, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 150 mm, pritisk: 3.450 letvica, Naprodaj: MAXIEM 2040 (2019) – Popolnoma pregledan in servisiran vodni rezalnik Imate priložnost kupiti MAXIEM 2040, letnik 2019, v zelo dobrem stanju – na novo servisiran, pregledan, prebarvan in pripravljen za proizvodnjo. Stroj je opremljen z: A-Jet (5-osna rezalna glava) – za posnemanje, poševne reze in kompenzacijo koničnosti Rapid Water Level Control – nastavljiva višina vode Premijska programska oprema – vključuje doživljenjske brezplačne posodobitve in neomejene licence Črpalka: 40Hp Dodpfx Agewn El Uo Neku Čas delovanja črpalke: pribl. 3500 ur To je zanesljiv, dobro vzdrževan stroj z veliko kapaciteto (rezalna površina pribl. 4 x 2 metra), popoln za vse, ki iščejo visoko natančnost, prilagodljivost in varnost proizvodnje. Dostava in montaža sta mogoči po dogovoru. Stroj je na voljo za ogled – kontaktirajte nas za več informacij ali rezervacijo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 8.869 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 305 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, dolžina mize: 4.100 mm, širina mize: 2.100 mm, pritisk: 6.500 letvica, hitro pomikanje X-os: 17 m/min, hitri pomik os Y: 17 m/min, višina mize: 900 mm, moč: 73,55 kW (100,00 KM), Oprema: varnostna svetlobna zapora, Flow Mach 500 4020 - Material Support Area • X-axis: approx. 4,100 mm • Y-axis: approx. 2,100 mm - Cutting Area • X-axis: approx. 4,000 mm • Y-axis: approx. 2,000 mm - Z-Axis Precision: programmable, servo-driven, traverse range 305 mm - Cutting Head: PASER 4 Dynamic Waterjet XD Technology Dkjdpfx Ajvvl Ugjg Nsu • Bevel and 3D cuts up to 55° without angular error • Cuts 2D and 3D components with tight tolerances at high speeds • 5-axis kinematic system - Intensifier Pump: HyperJet 94i-D • 6,500 bar, 75 kW (100 HP), 4.92 l/min • Pump cooling system • Tool kit for pump maintenance - Control System: FlowMaster + FlowExpert - Material Support System + Tank • Stainless steel construction • Water level regulation • Prepared for abrasive sludge removal system • Easily replaceable stainless steel slats for workpiece support - Abrasive Storage and Feed System: PASER CF 900 • Abrasive storage tank 425 kg - Flow UltraPierce (drilling composites, glass, stone) - Machine is powered up and operational - Optionally, the ongoing, fully equipped waterjet cutting service company in Poland is also for sale (including the premises, equipment fleet with 3 Flow waterjet cutting machines, customer base with 160 regular corporate clients, and complete company inventory)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, The Mach 100 waterjet cutting system is a reliable and versatile cutting solution that allows you to expand your production with minimal investment. Equipped with the same Flow core components as our premium waterjet cutting systems, the Mach 100 offers exactly the versatility and added value you need to start your production, supported by comprehensive service and support. Whether you want to increase capacities in series production or prototyping, or are looking to enter the waterjet business, the Mach 100 is your key to success. Dkodpfsv Szq Ajx Ag Nju

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, obratovalne ure: 90 h, MAXIEM 1530 Dsdotq Emxopfx Ag Neku Year of manufacture: 2022 Pump operating hours: 90 h Equipment: • M30 pump with 30 HP (22 kW) power; • Working table with a head travel range of 3048 mm x 1575 mm; • Control computer with Windows 10 and software; • Cutting head integrated with diamond orifice; • 300 kg abrasive feeder.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, delovno območje: 4.150 mm, potovalna razdalja osi X: 4.150 mm, pomik osi Y: 3.200 mm, pomik po osi Z: 250 mm, teža obdelovanca (maks.): 2.500 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 250 mm, dolžina mize: 4.500 mm, obratovalna hitrost: 1.000 mm/s, širina mize: 2.300 mm, kapaciteta rezervoarja: 8.000 l, pritisk: 4,1 letvica, višina mize: 900 mm, obratovalni tlak: 4.000 letvica, trajanje garancije: 6 meseci, obremenitev mize: 2.500 kg, skupna masa: 8.000 kg, vhodna frekvenca: 50 Hz, moč: 45 kW (61,18 KM), D2 MONSTER M5 high-end full 3D waterstraalsnijmachine, volledig gereviseerd in 2025, alle vitale componenten vervangen en de conditie zelfs beter dan nieuw. Deze machine heeft zeer weinig draaiuren (showroomgebruik) maar wordt momenteel compleet gereviseerd om volledige garantie te waarborgen. De machine wordt als nieuw geleverd met de nieuwste opties en ontwikkelingen, inclusief volledige garantie van 6 maanden. X-as bereik: 4150 mm Y-as bereik: 3200 mm Z-as bereik: 250 mm C-as bereik: +/- 275 graden A-as bereik: +/- 70 graden Tafelafmeting: 4500x2500 mm, snijbereik in 3D: 4000x2300 mm Kantelarmen voor het laden en lossen van platen tot 2500 kg. BFT Ecotron 40.37 pomp 37 kW 3,8 L/min Nieuwe pomp, draaiuren 0. Dksdpfxevdnpie Ag Neu Software afhankelijk van de toepassing (metaal of steen), in overleg te bepalen. Deze machine is gebouwd voor zeer nauwkeurige werkzaamheden en uitgerust met alle mogelijke opties, zoals camera’s, anti-botsing voelers, elektronische toevoeging van abrasief met vacuümregeling, enz. Opleverdatum machine in overleg. Deze machine heeft een nieuwwaarde van meer dan €300.000. Waterzuivering t.b.v. pompwater en systeem voor abrasiefverwijdering op aanvraag beschikbaar.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10046216, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 150 mm, dolžina mize: 4.000 mm, širina mize: 2.000 mm, TECHNICAL DETAILS Travel paths Dodpfxjwy Nm Hs Ag Njku X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: approx. 150 mm Cutting area Cutting range: 4,000 mm x 2,000 mm Max. cutting pressure: 3,800 bar Control system: Bystronic CNC control MACHINE DETAILS Pump type: High-pressure intensifier pump Drive system: High-speed linear drives Material capability: Cuts almost all materials Cutting process: Pure water or abrasive waterjet cutting Table type: Stainless steel slat cutting table Weight: 13,000 kg EQUIPMENT High-pressure pump unit Water filtration system Operator console with control panel Safety enclosures and light barriers Operating manuals + software CD-ROMs Documentation

Stanje: novo, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8100332, natančnost ponavljanja: 0,076 mm, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 25 mm, teža obdelovanca (maks.): 245 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, pritisk: 2.000 letvica, Do you need a precise and versatile cutting machine that doesn’t take up your entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial-grade quality with a compact footprint – perfect for workshops, schools, product development, prototype manufacturing, and small-batch production. Using water and abrasive, you can cut almost any material – from aluminum, stainless steel, and titanium to carbon fiber, plastic, glass, and stone. All with high precision, without heat distortion or material deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar Dedswl Ipkspfx Ag Njku 🔹 Power supply: 230 V, single-phase (standard socket!) 🔹 Ready to operate – plug & play ProtoMAX is delivered complete with IntelliMAX software, letting you draw, import, and cut directly from the same interface. Easy to use, powerful enough for advanced jobs. Want to show that your workshop means business – even with limited space? Then the OMAX ProtoMAX is the obvious choice.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,02 mm, pomik po osi Z: 200 mm, natančnost pozicioniranja: 0,07 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, dolžina mize: 3.000 mm, širina mize: 2.000 mm, trajanje garancije: 12 meseci, največja hitrost vožnje: 10.000 mm/min, Oprema: varnostna svetlobna zapora, The Mach 150 waterjet system is a powerful and cost-effective solution for precise 2D cutting applications. Equipped with advanced waterjet technology and robust components, this ready-to-use waterjet solution delivers outstanding performance. The machine features high-quality motors, drives, and software, all of which are also used in Flow’s top products. The Mach 150 is both cost-efficient and reliable. With our excellent service and maintenance offerings, you can rely on the sustainability and efficiency of the Mach 150. You are investing in the reliability and decades of experience that Flow stands for. The system offers the following key features: ◼ Inclined bridge for full access to the working area and user-friendly operation ◼ Proven machine controls with sensor technology and system status diagnostics ◼ Powerful PC built for industrial use Djdpsvnfc Iefx Ag Neku ◼ Multiple configurations to meet all industry requirements ◼ High-performance, industry-leading software ◼ A complete, ready-to-use system to ensure your production can start immediately.

Stanje: rabljeno, Leto izdelave: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - Machine complete with a 30HP (22kW) 4100 Bar EnduroMax crankshaft pump - Working table: 3656 mm x 1956 mm - X - Y axis travel: 3200 mm x 1575 mm - Air cushion (enables submerged material cutting) - Control computer compatible with Windows 10 and OMAX Layout&Make Premium software - Premium software package - Integrated cutting head with diamond orifice - OMAX abrasive feeder, 300 kg capacity A complete machine overhaul was carried out in 2024 (year of manufacture: 2008) Dkedpstmp T Dofx Ag Neu Option to equip the machine with additional accessories for an extra charge.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, obratovalne ure: 3.700 h, Funkcionalnost: popolnoma funkcionalen, delovno območje: 4.000 mm, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 150 mm, teža obdelovanca (maks.): 5.000 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 150 mm, dolžina mize: 4.500 mm, obratovalna hitrost: 1.000 mm/s, širina mize: 2.100 mm, kapaciteta rezervoarja: 8.000 l, pritisk: 4.200 letvica, hitrost pozicioniranja: 60 m/min, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 30 m/min, višina mize: 1.100 mm, obratovalni tlak: 4.000 letvica, trajanje garancije: 6 meseci, vhodni tok: 60 A, leto zadnje generalne obnove: 2024, tlak vode: 4 letvica, priključek za stisnjen zrak: 7 letvica, tlak črpalke: 4.200 letvica, skupna masa: 5.000 kg, vhodna frekvenca: 50 Hz, moč: 45 kW (61,18 KM), 3D rezalni stroj z vodnim curkom, uporabljen pri kamnoseških strankah. Popolnoma obnovljen leta 2024/2025 (postopek še poteka) s strani uradnega zastopnika CMS. Dedevdnn Eepfx Ag Nsku Fotografije prikazujejo stroj pred in med obnovo – ob dobavi je stroj kot nov (zadnja slika prikazuje primer dostave obnovljenih strojev). Rezalna glava je popolnoma 3D z Z-osjo v območju 150 mm. Rotacijska os +/- 274 stopinj, nagibna os +/- 62 stopinj. Stroj omogoča popolnoma 3D obratovanje z inteligentno Kerf Compensation (IKC) funkcijo; ni omejen na 2,5D glavo kot večina konkurenčnih modelov. Smo uradni CMS zastopnik v Beneluksu že 13 let. Možnost najema / lizinga / all-in lizinga glede na geografsko lokacijo. Elektronsko doziranje peska z vakuumskim nadzorom. 60 KM Jetpower Evo črpalka s 3 cilindri, kapaciteta 5 l/min pri največje 4200 bar (pretok v l/min določa hitrost rezanja, ne tlak). Stroj se dobavi popolnoma obnovljen z uradno garancijo. Seveda z 100% tehnično brezhibnostjo. Možna montaža in usposabljanje.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2011, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ----, delovno območje: 4.500 mm, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 250 mm, teža obdelovanca (maks.): 8.000 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 150 mm, dolžina mize: 4.500 mm, obratovalna hitrost: 20.000 mm/s, širina mize: 2.400 mm, kapaciteta rezervoarja: 8.000 l, pritisk: 4.150 letvica, hitrost pozicioniranja: 40 m/min, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 15 m/min, višina mize: 1.100 mm, obratovalni tlak: 4.150 letvica, trajanje garancije: 3 meseci, vhodni tok: 60 A, hitrost rezanja: 20.000 mm/min, največja hitrost vožnje: 40.000 mm/min, leto zadnje generalne obnove: 2024, skupna masa: 6.000 kg, moč: 44,13 kW (60,00 KM), Waterjet cutting machine from showroom. 2-head waterjet cutting machine CMS Tecnocut Easyline 1 head 2D with 250 mm Z-axis stroke 1 head 3D with 150 mm Z-axis stroke, A-axis travel +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D as with many other machines Fully interpolated heads, CNC controlled (not manually coupled) Cutting area: X-Axis: 2,000 mm Y-Axis: 4,000 mm Z-Axis: 250 / 150 mm A-Axis: +/- 274 degrees Dsdpeq U Irmefx Ag Neku B-Axis: +/- 62 degrees Options: - 5-axis cutting head - additional 2D cutting head - Abrasive removal conveyor - Anti-collision sensors on both heads More details / official quotation on request 60 HP Jetpower EVO pump with a capacity of 5 L/min (flow rate determines cutting speed) Max pressure: 4150 bar We have been an official CMS dealer for 13 years Perfectly maintained and in 100% technical condition Machine will be delivered in as-new condition, photos are from most recent usage We offer a 6-month warranty on this machine Rental / Leasing / all-in lease options also available