Silos Posodi Z Ventilom Ca 2 5 Cbm nakup rabljenega (130.214)

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 375 Ah, napetost baterije: 48 V, skupna višina: 640 mm, skupna dolžina: 920 mm, skupna širina: 442 mm, Tested forklift battery for your truck - 48V 3PZS 375Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end connector & REMA 320 plug (other plug types can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 920 mm Ijdpfowzvtpox Ah Dstn Width: 442 mm Height: 640 mm Weight: approx. 610 kg Suitable for the following models and more: Toyota/BT CBT4 Daewoo BR13 Doosan BR15J-5 Nichiyu FBR20 Common battery sizes available on request. Shipping possible.

Stanje: novo, skupna masa: 126.000 kg, največja dovoljena obremenitev: 98.290 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Extract from the equipment features. Complete specification available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable, length approx. 3,650 mm * 2 pairs of folding lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center of the gooseneck (LC 10,600 daN) * For tractors: 6 x 4 or 8 x 4 2-axle front bogie: * Pin-eye couplings at front and rear. Length approx. 2,970 mm * Chassis width approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle telescopic load bed with pin-eye coupling at the front and approx. 500 mm x 8° rear taper, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum axle 2-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pin for securing in raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle load bed: * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pin for securing in raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x brand of our choice (M+S) 245/70 R17.5 load index 143/141L (146/146F) Paintwork: * HRM metallising of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Final paint with 2 coats of 2K top coat, single color in DB 7350 Novagrau, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) Options included: Isdoxn E I Hspfx Ah Dstn * Truck hydraulic connection with flow control (20 l/min), incl. gallows for supply line suspension, tractor unit tank must be at least 80 L * With MAX Trailer couplings, otherwise couplings to be supplied by the customer ex works * 3.5 inch kingpin * Steel headboard, approx. 400 mm high * Plug-in ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish * Socket for remote steering operation of rear axles on gooseneck with cable remote control incl. axle single-track monitoring (installation in tractor unit not included) * Control levers on gooseneck protected by a foldable cover * Illuminated controls on gooseneck with on/off switch * BEKA-MAX central lubrication for gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed with screw couplings * BEKA-MAX central lubrication for 2-axle bogie with standard grease NLGI-2 * Stake pocket rails mounted transversely on the load bed for plug-in stakes approx. 100 x 50 mm * Chassis surface with sand-coated paint for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication for load bed with standard grease NLGI-2 * Load bed surface with sand-coated paint for anti-slip protection

Stanje: zelo dobro (rabljeno), Oznaka artikla: Kalibracijski etalon z 2 kroglicama - Mahr MarSurf Contour 2 ----- Stanje artikla: Blago iz podjetniške likvidacije. Brezhibno stanje. Iodpfx Aexm Rpaoh Detn Interna številka: 718L

Stanje: zelo dobro (rabljeno), Industrijski mešalec z 2 rezili iz nerjavečega jekla. Opremljen z obnovljenim motorjem moči 2,2 kW, ima 2 zobniška reduktorja S.T.M. tipa RI 70S z razmerjem 1:15, prilagojena lopaticam. Opremljen z ročnim sistemom za nastavitev hitrosti vrtenja rezil. Skupna masa mešalca: 120 kg, Skupna dolžina z ročaji: 200 cm, širina: 80 cm, višina: 48 cm. Lopatice so identične, snemljive, imajo ostri rob v smeri vrtenja in merijo 45 cm x 45 cm. Izdelano v Italiji. Namembnost: za predelavo mleka, vina, ter druge uporabe v živilski industriji, kjer delamo s tekočinami, za različne snovi različnih gostot in viskoznosti. Cena: 1.200 EUR + DDV, po dogovoru, FCA Oradea, Romunija. Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Govorimo angleško, nemško, madžarsko, francosko in romunsko. Itjdjh E Sfcjpfx Ah Dsn

Stanje: rabljeno, Leto izdelave: 2005, Grinding diameter: 500 mm Grinding length: 1500 mm Center height: 250 mm Control: GRINDplusIT Machine will be partially overhauled with measurement protocol and warranty Delivery within Germany and neighboring countries. 1 UR-RS 175 / 1500 standard version (T1, T2, T5, T7) Iedpfewulrhox Ah Dotn 1 Grinding wheel assembly T1 400x63x127 mm 1 Grinding wheel assembly T2 400x63x127 mm 1 Grinding wheel assembly T5 400x63x127 mm 1 Internal grinding attachment T7 Ø120 mm for HF spindles 1 Center height 250 mm 2 Grinding head motors: drive power 10.0 kW 1 CNC control Heidenhain GRINDplusIT 1 Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 KEL-POLY, non-circular grinding 1 KEL-NET for CNC control GRINDplusIT 1 B-AXIS GRINDplusIT: "CNC-controlled B-axis" (standard) 1 GRINDplusIT: v constant 35 m/s or 45 m/s_adjustment of grinding spindle via control 1 T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 Operating unit for 1x MFM or MFV spindles, VACON 22 kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 right HJND 21 1 x HF internal grinding spindle Fischer MFV 1260/4 right 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 Tailstock with manual retraction 1 MICRO ADJUSTMENT: Tailstock base with micro adjustment 1 Spring-loaded quill insert 1 Pneumatic relief for tailstock 1 Upper table flooding (standard) 1 Reinforced workpiece headstock MK 5 DIN 55026 size 5" 1 C-AXIS: CNC-controlled C-axis for reinforced workpiece headstock 1 Fixed base for reinforced workpiece headstock 1 KELPOS: active longitudinal positioning MOVOMATIC, mounted on grinding head 1 Diameter measuring head Movomatic; DU200 1 Measuring control unit Movomatic ES124 / digital 1 KELSET: tool measuring system KELSET, MARPOSS 1 Base module for KEL-TOUCH touch sensor and KEL-BALANCE balancing unit 1 KEL-TOUCH, touch sensor for diagonal/tandem 1 Full enclosure for emulsion 1 Coolant cleaning gun connected at the table 1 Grinding mist extraction unit emulsion 1 Lubricant for initial fill HF dressing unit type IBAG on upper table Data from delivery condition, no guarantee

Stanje: rabljeno, Leto izdelave: 1994, Pressure 250 t Column gap 1650 / 1400 mm Iedpfxjvuucwj Ah Detn Fixed stroke 150 mm Stroke rate 30 - 75 strokes/min Installation height (stroke + top ram adjustment) 665 mm Side column passage 550 mm Table size 1600 x 900 mm Table through-hole 1000 x 300 mm Table height above floor 980 mm Ram surface 1400 x 900 mm Drive power 42.0 kW Machine weight approx. 33.00 t Required space approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with steplessly variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight equalization, FIXED stroke, motorized ram adjustment, motorized central lubrication, electronic roller feed (Normatic, AESL 500-2.8) with motor (Indramat), motorized adjustable strip side guide, motorized height adjustment Tool change system Distance table - ram without tool change system approx. 765 mm Can be offered as-is (not commissioned) or alternatively with new Siemens S7-1500 F control system

Stanje: dober (rabljeno), WEILER CONDOR VS 2 iz univerze (preizkusni laboratorij) - Vodila "kot nova" - Višina konic: 165 mm - Premer vrtenja nad posteljo: 330 mm - Razdalja med konicama: 800 mm - Območje vrtljajev: 28-2800 obr/min - Avtomatski vzdolžni / prečni pomiki - Prehod vretena: 40 mm - Navoj / metrični / colski ipd. - Vpenjalne klešče – hitrovpenjalna naprava vklj. s kleščami - Štirikraka glava Röhm - Čelna plošča - Štirikraka čelna plošča - Zaščita glave - Multifix z vložki - Nujna zaustavitev - Dokumentacija Dimenzije: D x Š x V 2 x 0,8 x 1,6 metra / Teža 900 kg Itodpfjxc H Tyex Ah Don Možnost napak / sprememb besedila pridržana

Stanje: novo, skupna masa: 126.000 kg, največja dovoljena obremenitev: 96.590 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Oprema: ABS, Our complete vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Complete equipment details available upon request. Gooseneck: * Hydraulic gooseneck lifting/lowering and detachable. Length approx. 3,650 mm * 2 pairs of external folding lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings on the center section of the gooseneck (LC 10,600 daN) * For prime mover: 6 x 4 or 8 x 4 2-axle front bogie: * Pin and eye coupling at front and rear. Length: approx. 2,970 mm * Chassis width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) on the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle double telescopic load platform with pin and eye coupling at the front and rear bevel approx. 500 mm x 8°, length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum axle 2-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and safety pins to secure raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading area: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and safety pins to secure raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x manufacturer of our choice (M+S) 245/70 R17.5 load index 143/141L (146/146F) Itsdpoxn E Iyjfx Ah Den Coating: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final painting with 2 layers of 2K topcoat, single color in DB 7350 Novagrau, according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with flow regulator (20 l/min), incl. support frame for supply lines, the tank of the tractor unit must have a minimum capacity of 80 L * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied free ex works by customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear panels for the gooseneck, approx. 400 mm high, anodized finish * Socket for remote cable control of rear axle steering on the gooseneck with operating buttons including axle track control (without installation in the tractor unit) * Operating lever on the gooseneck protected by a folding cover * Gooseneck control area lighting with on/off switch * BEKA-MAX centralized lubrication for one gooseneck using NLGI-2 standard grease * Hydraulic connections from the gooseneck to the low bed with screw couplings * BEKA-MAX centralized lubrication for a 2-axle chassis with NLGI-2 standard grease * Stake pocket strips mounted transversally in the floor of the loading platform for plug-in stakes approx. 100 x 50 mm * Chassis surface with painted-in sand coating for slip resistance * Hydraulic coupling pin * BEKA-MAX centralized lubrication for the load platform with NLGI-2 standard grease * Surface of the loading platform with painted-in sand coating for

Stanje: rabljeno, Lastna teža: 15 kg Rabljeni komplet 2 dvojnih mostov za kable Št. artikla: W328999032-dražba Isdsxh Hc Espfx Ah Djtn Rabljeni komplet z 2 kabelskimi kanali, dvojni most

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, največja hitrost vrtenja: 10.000 obr/min, Hodi: x = 762 mm, y = 406 mm, z = 508 mm Itodpexltglefx Ah Don 5 osi s nihajno glavo. Trdo vrezovanje navojev, rotacija in skaliranje, hitra koda, orientacija vretena M19, visoko hitrostno obdelovanje, intuitivno programiranje in napredno upravljanje orodij, programabilna hladilna šoba, sistem za hlajenje, bočni izmenjevalec orodij 24 + 1 orodja, polžasti sistem za odstranjevanje odrezkov, Renishaw.

Stanje: novo, Preša z vretenom 5 T iz kategorije delavniških preš in skupine ročnih delavniških preš proizvajalca KNUTH je idealno orodje za vstavljanje in izbijanje čepov, puš, vreten in zatičev. Zaradi kompaktne zasnove in robustne izvedbe iz težke sive litine je nepogrešljiva tako v mehanskih delavnicah kot v servisnih obratih. Ta preša nudi tlačno silo do 20 kN in doseg 220 mm, kar omogoča izjemno vsestransko uporabo – pri ravnanju, upogibanju ali vrezenju s posebnimi vrezenimi iglami. Preša z vretenom se dobavlja brez stojala in vključuje uporabniški priročnik. S to zmogljivo delavniško prešo boste delali učinkovito ter prihranili čas in vire. Naročite svojo prešo z vretenom 5 T še danes in izkoristite njene številne možnosti uporabe v svoji delavnici! Itedpfouyihisx Ah Don

Stanje: rabljeno, Leto izdelave: 1988, Pressing force: 200 t Stroke: 30 - 160 mm Strokes per minute: 40 - 120 /min Upright clearance: 1500 / 1300 mm Shut height (stroke + ram adjustment at top): 860 mm Lateral frame passage: 600 x 530 mm Table surface: 1250 x 1250 mm Pass-through opening in the table: 550 x 300 mm Table height above floor level: 1000 mm Ram surface: 1250 x 1000 mm Ram adjustment: 125 mm Material width: 30 - 500 mm Itodpfsvut S Dsx Ah Den Material thickness: 0.5 - 3.0 mm Feed length: 0 - 999.9 mm Drive power: 50.0 kW Weight: 34.00 t Space requirement approx. 4.0 x 1.7 x 5.2 m (L x W x H) Approved for automatic operation in accordance with German accident prevention regulations (UVV). Equipped with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motor-driven ram adjustment, automatic stroke adjustment.

Stanje: rabljeno, skupna masa: 38.000 kg, največja dovoljena obremenitev: 29.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.550 mm, prva registracija: 03/2011, naslednji pregled (TÜV): 07/2026, Leto izdelave: 2011, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, * Pnevmatike 235/75R17,5 * Krmiljene osi * Hidravlične rampe zadaj * Rotacijska opozorilna luč zadaj * SAF osi * Bobnaste zavore * in še veliko več. Itsdpfx Ahjxccpkj Dsn * Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: dober (rabljeno), Jermeniška škripec, škripec, motorni škripec, pogonski škripec, trojni škripec - Jermeniška škripec: 5-stopenjski, Ø 40 do 90 mm - Vpenjanje: Ø 14 mm - Količina: na voljo 6x škripcev - Cena: na kos Itjdpfxsw U Ty Ee Ah Den - Dimenzije: Ø90 x 55 mm - Teža: 0,8 kg/kos

Stanje: dober (rabljeno), Rotacijska večnamenska peč / kuhalnik beljakovin z dvema velikima regalama (1 m x 1 m x 2 m). Prej uporabljena za kuhanje perutninskega mesa, primerna pa tudi za ribe, meso, zelenjavo in pripravljene obroke. Omogoča kuhanje samo s paro, s paro in povišano temperaturo, suho pečenje ter peko. To so industrijski standard v britanskih tovarnah za pripravljene obroke. Iedpsmrqqdsfx Ah Djtn

Stanje: rabljeno, skupna masa: 28.480 kg, največja dovoljena obremenitev: 19.080 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700, Itsdpfx Ahjw Sqifs Den

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Itedpsx Ug Defx Ah Don Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Stanje: rabljeno, Kranjska kljuka, dvižna jermenica, spodnja jermenica za žični vitel DEMAG tip 2-kolesni Nosilna kljuka Nosilnost označena: 5 ton Itedpfx Aew Nxy Heh Dsn 2-kolesni za 4 nosilne vrvi Premer vrvi: ca. 13 mm Zgornji rob jermenice do spodnjega roba pritrdilne kljuke: 650 mm Sredina koluta do spodnjega roba pritrdilne kljuke: 450 mm Dimenzije (dolžina x širina x višina): 350 x 315 x 650 mm Lastna teža: 73 kg Rabljeno, v dobrem stanju

Stanje: rabljeno, skupna masa: 40.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2007, * Daljinsko upravljanje * Prisilni volan * Raztegljivo za 4.300 mm * Odstranljiv labodji vrat Ijdpfsxchr Rex Ah Detn * Centralno mazanje * Lastna teža: 12.450 kg -----Interna številka vozila: 11307----Pridržujemo si pravice do napak in vmesne prodaje

Stanje: rabljeno, prevoženi kilometri: 482.878 km, moč: 294 kW (399,73 KM), prva registracija: 05/2009, vrsta goriva: dizel, barva: rdeča, konfiguracija osi: 6x2, velikost pnevmatike: 385/65R22.5, gorivo: dizel, medosna razdalja: 5.550 mm, vrsta prenosa: mehanski, emisijski razred: Euro 4, vzmetenje: jeklo-zrak, Leto izdelave: 2009, Oprema: žerjav, Man TGS 26.400 6x4H-2 BL Hydraulic front axle. Lift and steering axle. HMF Crane: Type: 1643 Z2 Iedpeuydb Defx Ah Detn Scanreco radio remote control. Bakker graph: BDV 100 cm. = Further Information = Technical Information Number of cylinders: 6 Transmission Gearbox: 16-speed manual transmission Axle Configuration Front axle: Tyre size: 385/65R22.5; Steered; Left tyre tread: 30%; Right tyre tread: 30%; Suspension: leaf spring Middle axle: Tyre size: 315/80R22.5; Twin tyres; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30%; Suspension: air suspension Rear axle: Tyre size: 385/65R22.5; Steered; Left tyre tread: 20%; Right tyre tread: 20%; Suspension: air suspension Dimensions Dimensions (L x W): 816 x 250 cm Weights Unladen weight: 13,195 kg Payload: 14,805 kg Gross vehicle weight: 28,000 kg Functional Crane: HMF Identification Type number: TGS 26.400 / 6x4H-2 / HMF Z KRAA = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We do our utmost to provide correct information, but no rights can be derived from the provided texts.

Stanje: novo, skupna masa: 102.000 kg, največja dovoljena obremenitev: 73.090 kg, konfiguracija osi: 3 osi, Oprema: ABS, You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Below is an excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 2-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * Drive-over bridge hooks at the front and bolt/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * End crossmember at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-axle front bogie: * Pendulum axles, all axles hydro-mechanically steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position * Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-axle rear bogie: * Pendulum axles, all axles hydro-mechanically steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position * Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres as per manufacturer's choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure automatically shot-blasted after welding process Itodpfx Ahoxbv Auo Don * Second abrasive blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) * Final coating with 2 layers of 2K top coat, single color in RAL 3002 Carmine Red according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Removable ALU side and rear walls for gooseneck, approx. 400 mm high * 3.5 inch king pin * Truck hydraulics connection with flow regulator (20 l/min), including gallows for hose suspension * Tank on tractor unit (SZM) must be at least 80 liters * With MAX Trailer coupling units, otherwise couplings to be supplied free issue by customer * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on gooseneck * Front bogie with separate air connection for pneumatic screwdrivers * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * Preparation for mounting bolt-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Mounting points on the outer beams of the loading platform for foldable extensions * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * Socket on rear bogie for connection of cable remote control for trailing steering * Rear bogie with trough * One LED beacon with bracket left and right on the rear crossmember

Stanje: rabljeno, skupna masa: 83.000 kg, največja dovoljena obremenitev: 44.750 kg, konfiguracija osi: 3 osi, prva registracija: 07/2013, naslednji pregled (TÜV): 10/2027, Leto izdelave: 2013, Internal vehicle number: G300087 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Heavy-duty tractor unit Unladen weight: 13,050 kg Gross vehicle weight: 41,000 kg Fifth-wheel load: 37,500 kg 630 HP Euro 6 Leaf / Air suspension Retarder Parking heater --- Low-loader Faymonville STBZ-6VA Year of manufacture: 2013 4 axles + 2 additional axles Extendable by 3.2 m Length: 16.43 - 19.63 m Width: 2,750 mm to 3,250 mm Max. permitted gross weight: 85,500 kg Unladen weight: 25,200 kg --- Vehicle combination Payload: 44,750 kg Unladen weight: 38,250 kg Total weight: 83,000 kg Length: 20,400 - 23,600 mm --- Itsdpfovzdzijx Ah Dsn Financing example: * Internal number: G300087 * Purchase price: 175,000.00 € * Down payment: 10% * Term: 60 months * Monthly instalment: 2,740.92 € * Final installment: 35,000.00 € If you are interested in this offer or wish to tailor it to your requirements, please contact us (Mr. Enchev). We look forward to your call. --- Subject to errors and prior sale. We are happy to accept your used vehicle as a trade-in. Financing available directly in-house. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Stanje: rabljeno, skupna masa: 36.000 kg, največja dovoljena obremenitev: 26.240 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 10.819 mm, prva registracija: 10/2008, Oprema: ABS, Proizvajalec: B-XL Model: 4,5 m, 2-osna razširitev Leto: 2008 Stanje: dobro Itedpfx Ahjvl Dkre Den Serijska številka: WKVDAS00200021091 Referenčna številka: 7721 Datum registracije: 27.10.2008 Bobnasta zavora: ? ABS: ? Zadnje preme: SAF Vzmetenje: zračno Velikost pnevmatik: 245/70R17,5 Preostala profilna pokritost: 40–40 % Skupna masa: 36.000 kg Lastna masa: 9.760 kg Krmiljena zadnja os: ?

Stanje: rabljeno, Podvozje z trenjskim pogonom za lahki žerjavni sistem DEMAG primerno za žerjavne tirnice iz sistemskih profilov tipa KBK 2 in KBK II L Tip: DRF 200-B14-1-43 Tovarniška št.: 45950995 Iodpow Nxyyjfx Ah Djtn Hitrost vožnje: ca. 40 m/min = 0,67 m/sek Moč motorja: 0,37 kW Priklop na omrežje: 400 V, 50 Hz - Pogonski motor DEMAG, tip ZBA 71 A2 B007 Voziček KBK 2 / KBK2L za obešanje v žerjavno tirnico Premer koles: 82 mm Širina koles: 21 mm Širina vozička: 78 mm Potrebni prostor D x Š x V: 410 x 320 x 470 mm Teža: 28 kg V dobrem stanju

Stanje: novo, skupna masa: 102.000 kg, največja dovoljena obremenitev: 73.540 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from equipment features. Full equipment list available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Iedpfjxbmplox Ah Detn Compact Front Chassis: * Hook mounts at front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator Deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle Rear Chassis: * Mechanical bolt-lug coupling for attaching a low bed at the front * Rear end cross member chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: 8 x 285/70 R19.5 M+S at manufacturer’s choice * Rear chassis: 16 x 285/70 R19.5 M+S at manufacturer’s choice * Load index 150/148J Paintwork: * Complete steel construction automatically blasted with shot-blasting system after welding. Second blasting with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure superior corrosion protection * Final paint in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5” kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Crane for supply line suspension; tractor unit fuel tank must have a minimum capacity of 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by customer ex works * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-coupler hydraulic connections on the gooseneck * Front chassis with separate air connection for air impact wrench * BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right rear on front chassis for warning signs * Threaded insertion option (ø approx. 40 mm) every 500 mm on the upper flange of the excavator deck’s outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle chassis with standard grease NLGI-2 * Socket on rear chassis for remote cable control of steering * Rear chassis with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of diesel engine * Operation of steering, in addition to cable remote control * One LED work light left and right on gooseneck rear plate with protect...