Shark 282 Ccs nakup rabljenega (3.984)

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Lredpsfg E H Uofx Aafen Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post Lrsdpfx Aaefg E Iasfjn - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Ljdpfx Aofg E H Reaforn Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Tračna žaga MEP Model: SHARK 330 CNC FE Leto: 1996 Stanje: Prenovljeno Kapaciteta rezanja pri 0 stopinjah: okroglo: 260 mm – kvadrat: 230 mm – pravokotnik: 330x230 mm Kapaciteta rezanja pri 45 stopinjah levo: okroglo: 240 mm – kvadrat: 200 mm – pravokotnik: 230x200 mm Dimenzije rezila: 3150x25,4x0,9 mm Hitrost rezanja: Počasna: 36 m/min – Hitra: 72 m/min Višina delovne mize: 690 mm Moč motorja rezila: 1,5 kW Moč motorja elektropumpe: 0,13 kW Moč motorja hidravlične enote: 0,22 kW Dimenzije stroja: 2460x2020x1790H mm Teža: 1220 kg PREVERJENO Lodpfoyk Unvex Aafsrn TAKOJŠNJA DOSTAVA

Stanje: novo, moč: 110,32 kW (149,99 KM), prva registracija: 12/2025, vrsta goriva: dizel, barva: bela, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 3.600 mm, širina tovornega prostora: 2.050 mm, Oprema: ABS, airbag, centralno zaklepanje, klimatska naprava, računalnik na krovu, RABLJENO JAMČENO!!! Kontakti: Za više informacija nazovite: 3441197960 – 030933077 Franco / Nicola Pratite nas i na Facebooku i Instagramu. Specifikacije: ODLIČAN ISUZU M27 ŠIROKA KABINA 3000 cc, TROSTRANI KIPER Iskoristive dimenzije: D 3600 x Š 2050, međuosovinski razmak 2750 Oprema: ABS, Zračni jastuk, Električni podizači stakala, Autoradio, Board computer, Centralno zaključavanje, Kontrola proklizavanja, Klima uređaj, ESP, CD player, MP3, Amortizirano sjedalo, Servo upravljač, Komande na volanu. Lrjdpfx Aaoxz Rk Tefen Rossini Service: Osnovan 1960. godine kao FIAT / OM servis, od 1992. Rossini Service je ovlašteni IVECO servis s ISO certifikatom. Naše kvalificirano i specijalizirano osoblje ima višegodišnje iskustvo u popravku i podešavanju automobila i industrijskih vozila svih proizvođača. Svako vozilo Rossini Service temeljito se pregledava i priprema prije isporuke.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, *Vsi naši izdelki so izdelani skrbno in pokriti z 1-letno garancijo! *Montaža in usposabljanje operaterja BREZPLAČNO Skupina izdelkov stožčasti drobilnik je zasnovana posebej za najtrdnejše materiale; stožčasti drobilniki so ena najboljših izbir za drobljenje rečnega prodnika, bazalta in granita ter tudi abrazivnih materialov v rudarski industriji. Delovno načelo stožčastih drobilnikov je drobljenje materiala s pritiskom – material se stisne med stenama, ki sta popolnoma prevlečeni z obstojnim plaščem in podlogo posode. V primerjavi z drugimi drobilniki imajo daljšo življenjsko dobo zaradi dolgožive obrabne opreme. Model: FABO CCS-440 Kapaciteta: 300-550 t/h Največja velikost vhodnega materiala: EC 450 mm C 400 mm MC 300 mm Motor: 220-250 kW Premer glave: 1300 mm Dimenzije (širina * višina): 3100 * 2850 mm Hitrost nasprotne gredi (rpm): 750-1200 Teža: 31.000 kg Lrsdpfxjy Tnylj Aafsn * Hydroset upravljalna enota * Samodejna zaščita pred preobremenitvijo * Praktičen izpust * Velika zmogljivost proizvodnje kubičnih delcev * Visoko zmogljivo brezstično labirintsko tesnilo * Visoka produktivnost, nizka poraba energije, nižji stroški obrabe, dolga življenjska doba in velik izkoristek izdelka z možnostjo finega mletja po želji. ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE!

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 108401 23-D, Ponudba 25318 Tehnični podatki: - Ročni tračni žagalni stroj - Dimenzija žaginega traku: 2375 x 20 x 0,9 mm - 2 hitrosti rezanja: N 33 / 66 o/min - Največja vpenjalna zmogljivost: 205 mm - Nastavljiv kot rezanja levo + desno: 30° - Rezni razpon: - 90° okroglo: 160 mm - 90° kvadratno: 160 mm - 90° ploščato: 200 x 100 mm Ledpfx Aoxta N Ajafjrn - 45° levo + desno okroglo: 140 mm - 45° ploščato: 140 x 60 mm - Pogon: 400 V / 1,5 / 1,8 kW - Opremljenost s hladilnim sredstvom - Odvodni valjčni transporter z omejevalom: 3000 mm - Dovodni valjčni transporter: 1500 mm - Teža: pribl. 350 kg - Potrebni prostor: pribl. Š 1100 x V 1700 x G 1550 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, številka stroja/vozila: H/32059, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, hitrost pomika os X: 22 m/min, TEHNIČNI PODATKI Višina panela: 10 mm do 50 mm Masiven les: 12 mm PVC/ABS: 0,4 mm do 3 mm Največja hitrost podajanja: 22 m/min Minimalna dolžina panela: 150 mm Minimalna širina panela: 70 mm PODROBNOSTI STROJA Lrodjydibwspfx Aafen Motorji rektifikacijske skupine: 1,5 kW (2 motorja) OPREMA Upravljanje na dotik za prilagajanje delovnih skupin Vodilo za podporo panela Stranski valjčni transporter z prostohodnimi valji za podporo panela Skupina za premaz proti prijemanju Nosilna plošča za valje COMBIMELT lepilna enota za vroče lepilo z avtomatskim dozirnikom VarioMelt s predtalilnikom Patentirana pritisna enota za robove s segmentiranimi pritisnimi ploščicami Obrezovalna skupina z 2 motorjema Čistilna skupina z 2 motorjema Enota za zaobljenje Enota za strgalo za robove Delovna višina nastavljiva elektronsko prek C.N. Motorni gumirani trak z zgornjim pritiskom

Stanje: rabljeno, Leto izdelave: 1982, Cutting height approx. 280 mm Cutting width approx. 280 mm Dimensions (LxWxH) 1500 x 700 x 1400 mm used Manufacturer: Behringer Model: Super 282 Year of manufacture: 1982 Machine no.: 0128 Blade length approx. 440 mm Cutting height approx. 280 mm Cutting width approx. 280 mm Lubrication system mobile mitre stop Space requirement approx. 1500 mm x 700 mm x 1400 mm Ljdpfxevwfc He Aafjrn Warehouse location: 97447 Gerolzhofen, free loaded, unpacked Delivery in "as viewed" condition, without any warranty or guarantee.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1130, premer mize: 250 mm, premer kolesa: 280 mm, največja hitrost vretena: 1.500 obr/min, TEHNIČNI PODATKI Največji premer kolesa: 280 mm Največji modul: 7 Ledpfx Aaow T R Ahefern Območje vrtljajev mize: 100 min⁻¹ Premer mize: 250 mm Razdalja med osmi: 15 - 285 mm Maks. aksialni pomik: 350 mm Rezkalna glava Pogon: 16 kW Min. število zob: 4 Vrtljaji rezkalnika: 1.500 min⁻¹ Največji premer rezkalnika: 160 mm Maks. dolžina rezkalnika: 230 mm Tangencialni pomik: 200 mm Tangencialna hitrost: 3.000 mm/min Zasuk: ± 45° PODROBNOSTI O STROJU Približna masa stroja: 13.000 kg Napajalna napetost: 400 V Mrežna frekvenca: 50 Hz Priključna moč: 35 kVA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1719, premer kolesa: 280 mm, TEHNIČNI PODATKI Največji premer kolesa: 280 mm Maksimalni modul: 7 PODATKI O STROJU Lredpfx Aaow T R Auefjn Teža stroja: 13 t Obratovalna napetost: 400 V Krmilna napetost: 24 V DC

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M60L/8583, Številka ponudbe: M60L/8583 Tip stroja: Pralni stroj za vijake Proizvajalec: MOC DANNER Model: Shark 100 Leto izdelave: 2014 Lredpfx Aaswi Swysfjn Kapaciteta: 250 kg Lokacija: V našem skladišču

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Lodpfx Aaefg E H Dsfjrn Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! • Hydraulic fully automatic bandsaw • Mitre cuts up to 60° to the left possible • Saw blade length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Lrjdsfm T Hbopfx Aafsn Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Lsdpofg E Hzjfx Aafern Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: pripravljen za uporabo (rabljen), VTL SC 14 cc Premer vpenjalne glave: 1.200 mm Lsdpfx Aasg D Hv Iefjrn Maksimalni premer struženja: 1.400 mm Največja višina obdelovanca: 1.000 mm Približna masa: 16,1 t

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Line consists of WEBER CCS 902 slicer, WEBER CCA inserter, and a grinding machine with spare blades and spare parts. Lsdpsgmdr Uefx Aafjrn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 10.720 h, Funkcionalnost: popolnoma funkcionalen, Willibald EP 5500 Shark v odličnem stanju in pripravljena za delo. Lredjy Iwgkepfx Aafjn

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 7.400 h, Funkcionalnost: popolnoma funkcionalen, ZNAMKA: WILLIBALD Ljdpfx Aaoy Iwa Refjrn MODEL: EP5500 LETO: 2014 URE: 7400 DODATKI: 48 kladiv SER. ŠT.: #134 REGISTRSKA ŠT.: 98.14.XX-552

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, For sale: (For further extensive technical data, see PDF) Lsdpswqz Nnofx Aaforn Technical Details of the Machine: - Long-tube filling system with 40 filling valves and 8 counterpressure pistons - Pre-evacuation system to reduce oxygen intake - Hygienic bottle table and stainless steel components for durability - Mechanical adjustment range: 3,000 to 15,000 bottles/hour - Capacity range: 0.33l LN 3,000–13,500 bottles/hr, 0.5l NRW 3,000–12,000 bottles/hr - Low oxygen pickup: max. 0.02 mg O2/l - Conversion parts included for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the Machine: This machine offers numerous benefits that enhance the quality of the filling process. - Smooth, product-friendly filling under CO2 atmosphere - 50–60% lower CO2 consumption compared to short-tube fillers - High durability due to reinforced drive elements - Hygienic design makes cleaning easier - Short changeover times - Convertible to cans according to the manufacturer (conversion kit not included) Low operating hours: 3 days/week at 7 hours each; rarely used for 4 days/week Annual maintenance by the manufacturer The machine is immediately available and was only decommissioned about 5 months ago. Original purchase price was approx. €330,000

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Ledpfx Aaoxab S Eefjrn Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets Lredpfx Aaoxaagbofon - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates Ljdpfx Aow U U Uwjaforn - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Cutting capacity at 45 degrees, flat: 300 x 200 mm Cutting capacity at 45 degrees, round: 260 mm Cutting capacity at 45 degrees, square: 250 x 250 mm Cutting capacity at 60 degrees, flat: 200 x 170 mm Cutting capacity at 60 degrees, square: 170 x 170 mm Cutting capacity at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Space requirement approx. 1647 x 2157 mm Weight: 720 kg Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotating table - MEP EVO microprocessor control for monitoring all machine functions * Swivels, mounted front right Lrjdpfxjxaax Do Aafen - Optional manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering speed - Carbide blade guides - Hydraulic blade tensioning, incl. digital value display - 2 blade speeds - 1 BI-Metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Lsdsxaa Tzepfx Aafern Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice