Sesati Band nakup rabljenega (4.142)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Nkodohy Tlrspfx Ag Tsu Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm Nkjdpjc S Di Rjfx Ag Tju OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) Nksdpfxel D Rp Es Ag Tsu HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Nkjdpfxslc Ewij Ag Teu Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Nkodpsfbr S Refx Ag Tju Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: novo, Leto izdelave: 2025, Odvijalnik RAZ-ENO 1250/2 - Jedro z 4 napenjalnimi rokami, na ležajih z diskom in zavoro Nedpfxexd Rgme Ag Teku - Največja širina zvitka: 1250 mm - Nosilnost: 2.000 kg - Notranji premer: 480–530 mm

Stanje: novo, Leto izdelave: 2025, Odmotovalec RAZ-ENO 1250/4 - stacionaren, 4,0 tone - Jedro koluta s 5 vpenjalnimi rokami, v ležajih s kolutno zavoro Nkedpfx Agjxd Rgae Teu - Največja širina koluta: 1250 mm - Nosilnost: 4.000 kg - Notranji premer: 480-530 mm

Stanje: novo, Leto izdelave: 2025, Sheet Metal Decoiler Cantilever 500mm - Load capacity: 1,500 kg - Inner Ø: 480–530 mm - Decoiler mandrel with 4 tensioning arms, ball bearing-mounted, with disc brake - Maximum coil width: 500 mm Nksdpfx Agjfvbxqe Tou

Stanje: novo, Leto izdelave: 2025, Sheet metal decoiler console 1000mm with wheels - Load capacity: 1,000 kg - Inner diameter: 480–530 mm - Mandrel core with 4 expansion arms, ball bearing mounted with disc brake - Maximum coil width: 1,000 mm Nsdpfxjfvbwzs Ag Tjku

Stanje: novo, Leto izdelave: 2025, Console decoiler with uncoiler (sheet width up to 100mm) - Load capacity: 1,000 kg - Internal diameter: φ480–530 mm - Uncoiler mandrel with 4 clamping arms, ball bearing mounted, with disc brake - Maximum coil width: 1,000 mm Nedpfofvbv Sjx Ag Tjku

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 1.500 kg, teža obdelovanca (maks.): 250 kg, hitrost rezanja: 75.000 mm/min, dolžina odseka (maks.): 400 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Njdeym Ntxopfx Ag Tjku Oddaja ponudbe zavezuje k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Dolžina reza: pribl. 400 mm Hitrost reza: do 75 m/min Potisk žage: hidravlični Hitrost spuščanja: 0–250 mm/min Dimenzije tračne žage: 4.100 x 27 x 0,9 mm Maks. masa materiala: 250 kg PODATKI O STROJU Pogon tračne žage: 2,2 kW Hidravlična enota: 0,37 kW Črpalka za hladilno tekočino: 0,12 kW Skupna potrebna moč: min. 2,7 kW Dimenzije in teža Dimenzije (D x Š x V): 2.400 x 2.300 x 1.700 mm Teža: 1.500 kg Zunanja referenca: Lot 17 / Weilheim

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Nkedpfov Sv Enjx Ag Tsu Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: dober (rabljeno), Leto izdelave: 1979, Premer valja 420 mm Izteg 410 mm Višina obdelovanca 265 mm Dolžina tračnega lista 3150-3260 mm Maks. širina tračnega lista 16 mm Velikost mize 600 x 600 mm Delovna višina 1000 mm Skupna potrebna moč 1,1/1,7 kW Nkodpfxjyg Raaj Ag Tsu Teža stroja cca 0,51 t Potreben prostor cca DŠV 740x920x1815 mm - vključno z varilno napravo - vključno z brusilno napravo - vključno z delovno lučjo - vključno s pol-hidravličnim podajalcem teže - vključno z nagibno delovno mizo - vključno z navodili za uporabo

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Nkjdpfx Agjc Tmygj Tsu Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna masa: 4.600 kg, natančnost pozicioniranja: 0,01 mm, širina mize: 500 mm, potreba po zraku: 1 m³/h, priključek za stisnjen zrak: 6 letvica, trajanje garancije: 12 meseci, delovna višina: 150 mm, dolžina tračnega lista: 6.170 mm, širina tračne žage: 90 mm, premer kolesa: 1.000 mm, širina kolesa: 80 mm, Visoko zmogljiva horizontalna tračna žaga za fino rezanje, primerna za vse potrebe pri ponovnem razrezu, vključno z izdelavo talnih oblog, oken, vrat, pohištva in glasbenih instrumentov. Izkoristite naslednje prednosti v vašem obratu: - Jeklena delovna miza na rezalnem mestu za najvišjo natančnost - Visoko natančne letevke z lepilno površino v toleranci ± 0,15 mm, odvisno od širine letevke - Razdeljen dovodni transporter s pogonsko pritisno enoto na vrhu - Ležaji na obeh straneh glavnih osi koles za maksimalno stabilnost reza Nedpfx Aev T Rnmog Toku - Nadzor žage med delovanjem stroja - Robustna litoželezna konstrukcija za dolgo življenjsko dobo in vrhunske tolerance - CNC upravljalna plošča z zaslonom na dotik za enostavno nastavitev višine - Ozek rez („thin-kerf“), visokonapete žagine liste za minimalne odpadke - Obdeluje material do širine 500 mm in višine 150 mm - Nastavljiva hitrost reza in dovoda - Površina reza je gladka in primerna za lepljenje - Variabilna hitrost dovoda do 16 m/min - Hitrost reza do 50 m/s

Stanje: rabljeno, Leto izdelave: 1999, Višina roba: 10 - 60 mm Debelina roba: 0,4 - 3 mm Minimalni radij krivulje: 20 mm Hitrost podajanja: 2 - 18 / 4 - 14 m/min. Motor: 5,2 kW Zračni tlak: 6 bar Dimenzije: 900 x 1300 x 1200 mm Teža: pribl. 350 kg Nedpfxoymcrbe Ag Toku Lokacija skladišča: Nattheim

Stanje: rabljeno, Lokacija skladišča: Sonnefeld Nkedpfx Aeway Dceg Teu

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Nodpfxovvkd Te Ag Tjku

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: Nedpfx Agovvkfdj Teku For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Leto izdelave: 2001, Hrúbka hrany: 0,2 - 6 mm Rozmery obrobku: - Minimálna šírka: 70 mm - Minimálna/maximálna výška: 8 / 42 mm - Minimálna dĺžka pri pásových hranách: 150 mm Posuvná rýchlosť: 12 m/min Valec na nanášanie lepidla Rozmery stroja (d x š x v): 3500 x 900 - 1300 x 1250 mm Hmotnosť: cca 1130 kg Prípojný výkon: cca 6,0 kW, 400 V, 50 Hz Vybavenie: - Dvojité horné pritláčanie s manuálnym nastavením výšky - Automatický zásobník na rolkové hrany do 800 mm priemeru - Rýchloohrevná lepiaca vaňa s nanášacím valcom v súhlasnom aj protibežnom smere - Pneumatické zapínanie a vypínanie všetkých pracovných jednotiek - Pneumatické kapovacie nožnice pre pásové hrany do 3 mm - Manuálne nastaviteľné vodiacie pravítko - Dvojitá kapovacia píla s 2 vysokofrekvenčnými motormi, 0,2 kW, 12 000 ot./min, 2 automatické pozície (0° + 3°) - Orezávacia/zrovnávacia frézovacia jednotka s 2 vysokofrekvenčnými motormi, 0,43 kW, 12 000 ot./min, obojstranné snímanie, s 2 vysokofrekvenčnými hlavami s otočnými nožmi - Rádiusová stieracia čepeľ, automatické podávanie Nksdpfovvkfqex Ag Tju - Plochá stieracia čepeľ, automatické podávanie Miesto skladovania: Nattheim

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Nksdpfx Agevvkfws Teu

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Nkodpsxyiilofx Ag Tsu

Stanje: rabljeno, Leto izdelave: 1968, maks. dolžina pločevine: 5600 mm, premer valja: 800 mm, maks. višina reza: 520 mm, maks. širina reza: 770 mm, nagibna miza: da, stran stojala: leva, prislonsko ravnilo: da, vodilo žaginega lista: valjčno vodilo, izvedba: stacionarna, teža cca: 800 kg, motor: 3,0 kW, lokacija: Nattheim Nksdevvkmuepfx Ag Tsu

Stanje: rabljeno, Motor 4,0 kW Premer valja: 800 mm Maksimalna višina reza: 440 mm Maksimalna širina reza: 785 mm Višina mize: 970 mm Dimenzije mize: 1170 x 800 mm Širina rezila: 40 x 7/10 mm Dolžina rezila: 5630 mm Premer odprtine za odsesavanje: 120 mm Dimenzije: 1625 x 940 x 2516 mm Teža: 650 kg Lokacija skladišča: Nattheim Nodpfewayzbjx Ag Toku

Stanje: rabljeno, Leto izdelave: 2006, EVA lepljenje z 2 pritisnima valjema, kap postaja, predrezkar in zaoblitveni rezkar, strgalo za površine, pogonska naprava. Lokacija skladišča: Nattheim Nkedpevvkg Iefx Ag Tju