Scm Tf 110 Nova nakup rabljenega (578)

Stanje: novo, Leto izdelave: 2023, širina skobljanja: 630 mm, skupna masa: 785 kg, premer ekstrakcijske šobe: 150 mm, višina skobljanja: 300 mm, premer gredi skobeljnika: 120 mm, število rezil: 4, moč: 7 kW (9,52 KM),

Stanje: pripravljen za uporabo (rabljen), Tehnične lastnosti Itedpotzth Ijfx Ah Ajr Enodelni okvir iz sive litine Uporabna širina: 630 mm Uporabna višina: 3,5 do 300 mm Minimalna dolžina obdelave: 260 mm Motor: 7 kW (9,5 KM) 4-nožni vreteno Premer gredi: 120 mm Električno dviganje/spuščanje Digitalni prikaz višine Delovna miza iz sive litine: 640 x 1000 mm Podprta s 4 stebri Pogon prek jeklenih in gumijastih valjev Hranilne hitrosti: 5; 8; 12 in 16 m/min Elektrika in motorji Napetost: 380 V Priklop: trofazni Moč: 11 kW Motor: 9,5 KM Mere in teža Teža: 785 kg

Stanje: dober (rabljeno), Leto izdelave: 1991, Spindle moulder, table milling machine, wood milling machine Isdpfowhbthjx Ah Aetr - Manufacturer: SCM, table spindle moulder type T 110 A with table extension - Drive: 4 kW - Milling spindle: 30 mm diameter arbor - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Table extension: on both sides with stops (see photos) - Total dimensions: 3600/910/H1610 mm / Machine: 2615/750/H1320 mm - Total weight: 550 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, delovna širina: 1.100 mm, moč: 15 kW (20,39 KM), Širokopasovni brusilnik v dobrem stanju. Opremljen z valjem in kombiniranim valjem. Učinkovit tudi pri brušenju na preprogi, idealen za brušenje manjših predmetov. Širina brušenja: 1100 mm. Prevoz po celotni Evropi je mogoče organizirati po ugodni ceni. Iodpfxexmfhdo Ah Astr

Stanje: rabljeno, številka stroja/vozila: 006487, Delovno območje os X: 3060 mm Delovno območje os Y: 1240 mm Delovna površina: Gnezdeči miza Iodpfx Ahsn Rzclj Ajtr Moč glavnega vretena: 8,5 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 18 Število pozicij za orodja: 16

Stanje: novo, Leto izdelave: 2023, širina skobljanja: 520 mm, skupna masa: 677 kg, višina skobljanja: 300 mm, odstranjevanje ostružkov: 150 mm, premer gredi skobeljnika: 120 mm, število rezil: 4, moč: 7 kW (9,52 KM),

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar Itsdpfxetwzyfe Ah Aer 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA2/001307, potovalna razdalja osi X: 6.500 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 250 mm, hitro pomikanje X-os: 60.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 30.000 m/min, dolžina podajanja os X: 6.500 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1 mm, hitrost pomika os X: 6.000 m/min, hitrost podajanja osi Y: 45.000 m/min, hitrost podajanja os Z: 30.000 m/min, nazivna (navidezna) moč: 15 kVA, proizvajalec krmilnikov: NUM, model krmilnika: 1040, dolžina obdelovanca (maks.): 6.500 mm, širina obdelovanca (maks.): 1.350 mm, višina obdelovanca (maks.): 180 mm, skupna višina: 2.750 mm, skupna dolžina: 8.000 mm, skupna širina: 4.000 mm, širina mize: 1.350 mm, višina mize: 950 mm, dolžina mize: 6.500 mm, hitrost vretena (min.): 24.000 obr/min, moč vretenovega motorja: 11 W, Working directions of axes X-Y-Z Isdpfxow Au N So Ah Aotr 6500 x 1350 x 250 mm Working area 6500 x 1250 mm C-Axis = 640, B-Axis =270 Milling unit PRISMA wit 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600-20.000 rpm Tool holder HSK63 Working table with TVN pads and vacuum suckers Cross laser projector on the working table TVN vacuum sucker Pneumatic clamps Tool magazine 24 holders Drilling unit Vacuum pump 5,5 kW 250 m³/h CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5450 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 8.000 obr/min, dolžina gredi: 145 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Zgornja rezkalna enota Število motorjev: 1 Dolžina gredi: 145 mm Moč motorja: 4 kW Število obratov: 8.000 obr/min PODROBNOSTI O STROJU Vgrajena skupna moč: 5 kW Isdpsxxar Uefx Ah Astr Moč motorja: 3 kW

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: AB/118120, TILTING SPINDLE MOULDER SCM MOD. T110I - CE - USED - Voltage: 400/50 Itedewrfhkspfx Ah Ajr - Serial No.: AB/118120 - Year: 1998

Stanje: rabljeno, SCM brand calibrating machine, model Sandya LS1 R110, with 1100 mm roller and brush. Approximate power consumption: 13 kW. Used. Roller: 11 kW Iedpfx Aheuk Hi Ro Aetr Brush: 2.2 kW Conveyor belt: 0.75 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Odvodni sistem: tračni transporter dolžine 5,6 m in širine 270 mm. Minimalna dolžina 400 mm, maksimalna dolžina 5000 mm. Snemalna metla s potiskom 500 mm. Nov nadzorni sistem. Nov transportni trak. Novo gonilo za snemalno metlo. Iedpfx Ahotrw N Ej Aotr Q-transportni trak / sprejemni trak, širina 900 mm in dolžina 3250 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: nefunkcionalno, številka stroja/vozila: AA2/0001518, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 300 mm, nazivna (navidezna) moč: 10 kVA, proizvajalec krmilnikov: SCM, dolžina obdelovanca (maks.): 6.000 mm, širina obdelovanca (maks.): 1.200 mm, število vreten: 2, število mest v zalogovniku orodij: 12, vhodna napetost: 400 V, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, SCM Record RD 110NTTVN CNC obdelovalni center, Serija: AA2/000518 leto 2008. V zelo dobrem stanju. X=6m, Y=1,2m, Z=300mm. Trenutno opremljen s programsko opremo za izdelavo stopnic. Ijdpsx Ek Rkjfx Ah Ajtr 12-pozicijski menjalec orodij s 1 dodatno glavo. Rail & pod stroj z 8 tirnicami. Delo možno v 2 poljih. Sprednje varnostne preproge in nadglavni laserski sistem. Popolnoma opremljena, z vso dokumentacijo. Dimenzije: 8m x 2,4m x 1850mm (V) Teža: 5000kg. Ogled možen na naslovu: The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Video in fotografije so na voljo preko WhatsAppa.

Stanje: dober (rabljeno), For sale: SANDYA CL110 belt sander Itodsvx Tnmepfx Ah Aor

Stanje: rabljeno, SCM Sandya RT 1100 Kalibracijski stroj Valj + Blazinica, širina traku 1100 mm. Stroj je delujoč in preizkušen. Ijdpsxcu Skefx Ah Aetr Transportni trak v odličnem stanju.

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg Itjdpfoiiynnsx Ah Asr INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel Itjdpfxoxqggco Ah Aer 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller Ijdpfjitvkuox Ah Astr 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 – 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 – 18 Working units: 1st unit: "RA" diagonally grooved steel contact roller, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Iedpfxehtuvro Ah Ajtr C version: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/pad unit - Sector activation via electronic control, synchronizing engagement with the feed speed and regulating the number of segments based on workpiece geometry, enabling selection of more or fewer sectors on the left and right sides of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed Additional features: Roller table in infeed and outfeed for long workpieces Perforated table and feed belt Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S software integration’ ATTENTION: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Itodpjcrnm Nofx Ah Asr Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, SCM gabbiani p90 Panel Sizing Saw - Demonstration Model - Special Offer! Technical Specifications: Saw blade projection: 90 mm Working table height: 950 mm Number of standard clamps: 5 CUTTING DIMENSIONS: 3300 x 3200 mm Variable saw carriage speed: 6 - 60 m/min Variable pusher speed: 0 - 60 m/min Saw blade motor power: 7.0 kW Itsdjiz A Amopfx Ah Aer Speed: 4650 rpm Saw blade diameter: 340 mm Saw shaft diameter (main blade): 80 mm Scoring unit motor power: 1.5 kW Speed: 5850 rpm Scoring blade diameter: 200 mm Scoring blade shaft diameter: 80 mm Compressed air requirement: 300 NL/min Operating pressure: 7.0 bar Extraction air requirement: 2440 m³/h Extraction air velocity: 20 m/sec Extraction port diameter: 4 x 120 mm Including the following options: 590134 Cutting depth 3200 mm (Version 33) OF0263 eye-M operator console with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation (without gateway) for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with rollers, located on the longitudinal fence side 590246 Fixed air cushion table 2500x800 mm with rollers and reinforced fan 590239 2 x Movable air cushion tables 1500x600 mm with rollers and reinforced fan 590244 Saw carriage with independent lift control for saw and scoring blades 590245 Optimized vertical lift for the saw blade in 2 stages (medium/maximum) 590143 Grooving unit with manual blade height adjustment 590241 Grooving function (forward/backward movement of the saw carriage) 590164 Double automatic side aligner 301230 Foot switch for cycle start and stop 590044 Compact labeling unit - Label printing with barcode 590144 4 x Additional clamps 900088 Magnetic tape monitoring for pusher position 102015 European safety regulations (CE marking) 109993 MACHINE LANGUAGE: German

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. Iedpfxohvan Is Ah Aotr • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Itodsdd Hi Eepfx Ah Aor Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Itodpfxjr A Eq Re Ah Aer The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Isdpeiknp Rsfx Ah Aotr Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm