Scm Si 12 B nakup rabljenega (585)

Stanje: rabljeno, Leto izdelave: 2010, Carriage length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scorer: Yes Saw blade height adjustment: electric / position control Kwsdjvadx Ejpfx Abbet Saw blade tilt adjustment: electric / position control Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Motor brake: Yes, automatic Extraction connection: 80 mm and 120 mm Machine length: 3500 mm Machine width: 2200 mm Weight: 1000 kg

Leto izdelave: 1990, Stanje: rabljeno, for edge heights: 10 - 60 mm Edgebanding thickness: 0.4 - 25 mm Feed speed, infinitely variable: 10 - 15 m/min Flush trimming unit - speed: 9,000 rpm electrical connection: 380 V, approx. 9.9 kW Kwedpfxs T T Dde Abbjt Space requirement: 2,900 x 870 x 1,320 mm Weight: 780 kg

Stanje: novo, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit on separate motor Manual height adjustment of saw blade Tilting saw blade from 0° to 45° Manual tilt angle adjustment of saw blade Kedpfx Ajv S Uz Isbbjwt Carriage length: 3,200 mm Carriage lock Worktable dimensions: 1,450 mm x 1,030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3,430 mm Width: 1,900 mm Height: 1,560 mm

Stanje: novo, Standard equipment and accessories - 10-year warranty on the saw carriage guide system - Saw carriage with anodized aluminium profile, guide made of hardened, ground and rolled-in steel tracks - Saw carriage length: 3200 mm - "READY" electronic control, 2-axis control (3rd axis available upon request) with: - Height adjustment and tilt of the saw unit (parallel fence control on request) - Tool data management with automatic correction of cutting height relative to the saw blade tilt angle - Manual, semi-automatic, and automatic modes with 99 storable work programs - Additional functions: calculator and operating hours counter - Framing table for quick positioning of the fence for mitre cuts - Outfeed table extensions - Cutting length on rip fence 1270 mm - 2-axis control with 99 programs Motor 7 kW 50 Hz (8 kW 60 Hz) - Motor with direct connection and push buttons - Three main saw blade speeds - Scoring unit with independent motorization, externally adjustable, and stops for easy saw blade positioning Safety/Protection - Emergency stop button at the front - Emergency stop button at the parallel fence area (CE version) - Thermal protection switch - Pendulum blade guard (CE version) with integrated extraction, extraction port diameter 80 mm - Pendulum blade guard with integrated extraction, extraction port 80 mm diameter - Automatic motor brake on main saw blade (CE version) - Lockable main switch - 110 V auxiliary circuit - CE declaration of conformity (CE version) Technical data Maximum cutting height at 90° (mm): 140 (with 400 mm blade) Maximum cutting height at 45° (mm): 97 (with 400 mm blade) Saw blade tilt (degrees): 45 Lifting and tilting of saw unit: programmable Saw blade speed (rpm): 3000 / 4000 / 5000 Scoring blade speed (rpm): 8500 Main motor power (S6 -40%) kW (HP), 50 Hz: 7 (9.5) Scoring unit power (S6 -40%) kW (HP), 50 Hz: 1.3 (1.7) Panel cuts: - with carriage 1600 (mm): n.a. - with carriage 3200 (mm): 3200 x 3200 Rip capacity (mm): 1270 Extraction port diameter: - frame (mm): 120 - saw blade guard (mm): 80 - riving knife (mm): n.a. Net weight, base machine (kg): 1050 109999 Version according to safety regulations R10078 nova si 400ep CE version 930731 Voltage: 400V EU 931201 Frequency: 50 Hz 570343 Digital display for rip fence Complete with: - Digital display and magnetic tape 570133 Motor 9 kW 50 Hz (11 kW 60 Hz) with automatic star/delta switch, 9 kW 12 HP 50 Hz (11 kW 15 HP 60 Hz) 083202 Base frame Ksdpfevxr Skjx Abbowt 109993 MACHINE LANGUAGE: German

Stanje: delavnici obnovljeno (rabljeno), Priključna moč 380V 13A, pogonski motor 5,5kW + podajalni motor 0,7kW, širina skobljanja 630 mm, gred Tersa s 4 noži, brezstopenjski podajalni pomik 6-18 m/min, stikalo zvezda-trikot, mehanska nastavitev višine mize s pomočjo ročne ročice – pogon preko nožne gredi, fino nastavljanje z ročnim kolesom, mehanski digitalni prikaz višine oblanja, 1x mizni valj, priključek za odsesavanje 160 mm, 1x jekleni podajalni valj, 1x jekleni izstopni valj. Kwodpfx Abjxdl U Ejbst

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB141760, največja širina rezanja: 1.500 mm, širina reza pri vzporednem vodilu: 1.500 mm, moč: 7,5 kW (10,20 KM), dolžina pomične mize: 3.200 mm, Oprema: dozator, SCM panel saw, model SI 400 E Ksdpfx Abjtwp Epobswt Connection voltage: 380V Main motor: 7.5 kW Scoring motor: 0.75 kW Sliding table length: 3,200 mm Cutting width: 1,500 mm Table extension: 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit with manual adjustment Electrical height adjustment Electrical tilting with Siko display Extraction port: 1x100 mm, 1x120 mm

Stanje: rabljeno, Tip SI 15 WF Dimenzije potezne mize: 2700 x 2300 mm Hod mize: 2600 mm Največja dolžina vodila žage: 900 mm Premer žaginega lista: 400 mm Nagib lista: 0–45 ° Dimenzije mize: 1150 x 630 mm Kwodpfx Absitvd Iobjt Premer glavne gredi: 30 mm Glavni motor: 11 kW, 380 V Največja odprtina: 140 mm Transportne dimenzije: 2700 x 1800 x 1200 mm Teža: 820 kg Cena: 1.200 EUR (EXW Jonava, Litva)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AH/121500, potovalna razdalja osi X: 2.486 mm, pomik osi Y: 1.255 mm, pomik po osi Z: 150 mm, širina mize: 1.290 mm, dolžina mize: 2.570 mm, TEHNIČNI PODATKI Pomik osi X: 2.486 mm Pomik osi Y: 1.255 mm Pomik osi Z: 150 mm Kjdpfox Tppnsx Abbjwt Maksimalni hod osi X: 3.120 mm Maksimalni hod osi Y: 1.685 mm Maksimalni hod osi Z: 250 mm Dolžina mize: 2.570 mm Širina mize: 1.290 mm Pozicije izmenjevalca orodij: 8 kosov PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 3.870 x 1.900 x 2.300 mm Lastna teža: 2.500 kg Transportni paketi: 1 kos OPREMA CE oznaka

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops Kwedpfoiiyppex Abbot With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: - Shorter machining times thanks to improved acceleration Kwsdsvvi Scspfx Abbot - Greater positioning accuracy thanks to high-resolution encoders - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e

Stanje: novo, Leto izdelave: 2024, Na zalogi je horizontalna CNC mozničarka STARTECH CN Plus. Kwedpfxoip Dh Ij Abbet

Stanje: novo, Leto izdelave: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Joiner table length: 2300 mm Ksdpfxjvadxle Abbjwt Tiltable fence: yes Fold-up jointer tables: pneumatic Maximum planing thickness: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Stanje: rabljeno, Oprema: CE označba, ROBNI LEPILNI STROJ "SCM" model S212 Rabljeni stroj - V380/50 - "CE" Koda: BRD-008 - - - - OPREMLJEN S: * Brusilne enote * Posoda za lepilo s predfuzorjem * Odrezovalna enota z 2 motorjema * Rezkalnik s pnevmatskim izklopom Kwedpfex Sx Udjx Abbot * Zaokroževalnik s pnevmatskim izklopom * Zaokroževalnik s 4 motorji * Robni strgalo * Ščetke * Mehanski prikazovalniki

Stanje: dober (rabljeno), Tehnične značilnosti: • Najmanjša širina plošče: 55 mm • Najmanjša dolžina plošče: 140 mm • Minimalna/maksimalna debelina plošče: 10 - 60 mm • Debelina roba: 0,4 - 3 mm • Največja debelina letvice: 12 mm Komponente in funkcije: • Sestava Kedpfoi E S Rlox Abbewt • Kalibracijske enote • Polnilec za robne trakove • Enota za čelno rezanje • Enota za obrezovanje • Obdelava robov • Enota za zaokroževanje • Strgalo za robove • Krtače

Stanje: rabljeno, Leto izdelave: 2011, · Working area: 2,550 x 1,067 mm · Travel range X-Y: 2,980 x 1,450 mm · Z-axis stroke: 150 mm · Clearance height: 120 mm Drilling unit F14: Drill head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M10 with 11 mm fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit: · Tool holder HSK 63F · Speed 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Prepared for angle drive use Tool changer TR10 Automatic side tool changer for 10 tools. · Number of tool slots: 10 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total tool weight: 28 kg A central extraction port combines all machining units to a single connection with D = 200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. Kwodpfx Aex Twc Nobbjt Worktable TVF The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum system ensures maximum flexibility, precise positioning, and optimal clamping of workpieces. · 4 TVF supports L = 1,100 mm, continuously adjustable in X · 12 TVF vacuum cups 120 x 120 mm, continuously adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · The retractable reference stops are CNC-controlled Automatic central lubrication The correct amount of grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (basic machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data · Total connected load max.: 18 kW · Recommended fuse: 64 A · Supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100mm and 18 vacuum cups 120x120 mm Cross laser for vacuum cup positioning Two cross lasers mounted on the unit carrier facilitate easy positioning of the vacuum cups. Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2023, Display Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY GUARDS: MORE WORKING SPACE FLOATING CLAMPS: GUARANTEED PERFECT CUTTING TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Number of standard clamps 5 Number of clamps for versions 33/38/43 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz RPM 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING UNIT Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz RPM 5850 Scoring blade diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power kW 12÷15 Machine voltage Euro voltage (400 V / 50 hz) Compressed air requirement NL/min 300 Required air pressure bar 7 Extraction air flow rate m3/h 2440 Extraction air speed m/sec 20 Extraction nozzle diameter mm 4x120 () Note: For countries where EC directives apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel saw with PC/PLC control, for cutting panels from solid wood, MDF, chipboard, plywood and similar materials. Machine frame and working table - Machine frame constructed from steel tubing - Working table made of ribbed, reinforced steel with bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of - one motor for the main saw blade and one for the scoring blade - Vertical lift of saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure optimum cutting quality - Travel direction against the longitudinal fence - Saw carriage drive by rack and pinion - Carriage guidance on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year warranty), protected by special dust wipers - Pneumatic switch for quick and safe main/blade changingPressure beam - Pressure beam applies even pressure to the workpiece over the entire cut length with cutouts to avoid collisions with the clamps; pneumatic height adjustment on high-precision racks and pinions, pressure adjustable 1.5-6 bar - Dual extraction system with a unit above the pressure beam for cleaning the worktable and one below on the saw carriage – Side automatic aligner with pneumatic cylinder along the entire length. Slide on linear ball bearing guides and shoes. * Travel distance: 1200 mm * Minimum working width: 60 mm * Maximum working width: 1200 mmPositioning pusher and rear part of the machine - Positioning pusher along the entire length driven by robust shaft. Positioning pusher movem... Kwodpfxsx Twcvj Abbst

Stanje: rabljeno, Number of machines: 9 units. Wooden window production line for sale on behalf of the customer. Machines can still be inspected in operation. Sale includes machines, tools, and programming of the produced systems. Including special production for slanted and arched windows. Item 1: Weinig Powermat 500, year 2010, window version ----- - 6 spindles, 5x PowerLock - 8,000 rpm - Equipment for glazing bead separation - Large PowerCom control system - Includes existing Leitz planing and glazing bead tools - Linked with Maweg single-piece sanding machine Saturn Duo, year 1985, also including workpiece return conveyor Item 2: SCM Windor 40 R window production system, year 2006 ----- - 2 long slot spindles, CNC controlled - 3 long profile spindles, CNC controlled + top and bottom aggregate - Reversing carriage for small sashes - ROTATEN: Slanted window unit - Including Leitz tools for windows and doors - Including separate OKOMA UF 3 reversing machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Overhead laser - Working area 4200 mm length, 1350 mm depth - 32-position disc-type tool changer - 8-position linear tool changer - Fixed drilling head, 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for PowerClamp clamps, 8 units - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor - Various small solid wood clamps, used for box windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year 2015 Item 4: Löwer MZP 1 mini finger joint press ----- - For arched window production Item 5: S+S frame press type Bavaria 200 L, year 2014 ----- - Working size 4000 x 2600 mm - With center pressure beam and cross pressure unit - Motorized width adjustment - Standard equipment for counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate layer for small size pressing - Various support plates for counter profiles and counter profiles Item 6: Striffler sash hardware assembly table ----- - With automatic screwdriver and screw feed - Hardware rack - Punch for Roto hardware Item 7: Stegherr KF counter profiling machine ----- - With existing tools Kjdpfx Abjyclwxjbowt Item 8: Tools ----- All tools belonging to the machines for the wood and wood-alu systems IV 72 + 92 mm, as seen in the PDF: - Windows - Lift and slide doors - Arched and slanted windows - Box-type windows - Entrance doors in various versions - Putty rebate variants - ... Tools are sold as is, in current scope and with accessories as currently available. Note regarding window cross-sections, tool drawings, tool system lists: Engelfried GmbH assumes no liability that the actually available tools match the specified and drawn systems. (Technical data according to manufacturer, without guarantee!) ----- Total price item 1 ...

Stanje: rabljeno, Wooden Window Production Line for Sale by Customer Order. Machines can still be inspected in operation. Sale includes machines, tools, and programming for the manufactured systems. Includes capability for production of slanted windows and arched segments. Item 1: Weinig Powermat 500, Year 2010, Window Version ----- - 6 spindles, 5 with PowerLock - 8,000 rpm - Equipped for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and bead tools - Linked with Maweg single-piece wood sanding machine Saturn Duo, Year 1985, and return conveyor system for workpieces Item 2: SCM Windor 40 R Window Line, Year 2006 ----- - 2 long slot spindles, CNC controlled - 3 long profile spindles, CNC controlled + unit from above and below - Sash turnover cart for small sashes - ROTATEN: Facility for slanted windows - Includes Leitz tools for windows and doors - Includes separate OKOMA UF 3 turnover machine with tools Item 3: HOMAG CNC Processing Center BMG310/42/F/K, Year 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Overhead laser - Working dimensions: 4,200 mm length, 1,350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head: 18 spindles V12/H6/S0/90° - 8 consoles - 6 lifting rails - Connection for 8 PowerCLamp clamps - Approx. 30 vacuum clamps - 4 PowerCLamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for box-type windows - Includes Leitz tools for Homag, with arched window production - Includes Barbaric vacuum lifter, Year 2015 Item 4: Löwer MZP 1 Mini-Finger Joint Press ----- - For arched segment production Item 5: S+S Frame Press Type Bavaria 200 L, Year 2014 ----- - Working dimensions: 4,000 x 2,600 mm - With central pressure beam and cross pressure device - Motorized width adjustment - Basic equipment of counter profiles - Slanted window control - Swiveling pressure plates + extension for pointed windows - Intermediate inserts for pressing small sizes - Various carrier plates for counter profiles and counter profiles Item 6: Striffler Sash Fitting Table Kwsdpfx Aoyclwlobbjt ----- - With automatic screwdriver and screw feeding - Fitting shelf - Punch for Roto fittings Item 7: Stegherr KF Counter Milling Machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood and wood-aluminum systems IV 72 + 92 mm as shown in the PDF: - Windows - Lift-slide doors - Arched and slanted windows - Box-type windows - Entrance doors in various versions - Putty rebate variants - ... Sale of tools in current condition, scope, and with accessories as available. Note on window cross-sections, tool drawings, tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the named and illustrated systems. (Technical data as per manufacturer, without guarantee!) ----- Total price for items 1 - 8 ex-location on request!

Stanje: rabljeno, Wood window manufacturing line for sale on behalf of a customer. Machines can be inspected in operation. Sale includes machines with tools and all system programming. Incl. production setup for angled and arched windows. Item 1: Weinig Powermat 500, year 2010, window version ----- - 6 spindles, 5 x PowerLock system - 8,000 rpm - Equipped for glazing bead machining - Large PowerCom control unit - Incl. existing Leitz moulding and beading tools - Linked with Maweg single-piece wood sanding machine Saturn Duo, year 1985, including return conveyor system Item 2: SCM Windor 40 R window manufacturing system, year 2006 ----- - 2 long slot spindles, CNC-controlled - 3 long profile spindles, CNC-controlled, with top and bottom unit - Rebate cart for small sashes - ROTATEN: setup for angled window production - Incl. Leitz window and door tooling - Incl. separate OKOMA UF 3 rebating machine with tooling Item 3: HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- - Gantry-type machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working size: 4200 mm (length) x 1350 mm (depth) - 32-position disc tool changer - 8-position linear tool changer - Fixed 18-spindle drilling head (V12/H6/S0/90°) - 8 consoles - 6 lifting rails - Connections for 8 PowerCLamp clamps - Approx. 30 vacuum clamps - 4 x PowerCLamp actuators - WoodWop software - Chip conveyor belt - Various small solid wood clamps, used for box sash windows - Incl. Leitz tooling for Homag with arched window production Kwedjyclwfspfx Abbjt - Incl. Barbaric vacuum lifter, year 2015 Item 4: Löwer MZP 1 mini finger joint press ----- - For arched window production Item 5: S+S frame press type Bavaria 200 L, year 2014 ----- - Working dimensions: 4000 x 2600 mm - With central pressure beam and cross-pressure device - Motorized width adjustment - Basic set of counter profiles - Angled window control - Oscillating pressure plates + extension for pointed windows - Intermediate padding for pressing small sizes - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash hardware workstation ----- - With automatic screw driver and screw feed - Hardware rack - Punch for Roto hardware Item 7: Stegherr KF coping router ----- - With existing tools Item 8: Tooling ----- All tools belonging to the machines for the wood and wood-aluminium window systems IV 72 + 92 mm visible in the PDF - Windows - Lift & slide doors - Round and angled windows - Box sash windows - Various front entrance doors - Putty rebate versions - ... Tooling sold as-is, with current accessories and sets. Note on window sections, tool drawings, tool system listings: Engelfried does not warranty that the actual tools on hand perfectly match the listed or drawn systems. (Technical info according to manufacturer – without guarantee!) ----- Total price for items 1–8 ex location: on request!

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AE/22614, dolžina rezanja (maks.): 3.200 mm, največja širina rezanja: 4.500 mm, skupna dolžina: 5.000 mm, skupna višina: 2.350 mm, skupna širina: 7.000 mm, AVTOMATSKA RAZREZOVALKA SCM MOD. SIGMA N 65 - PO CE STANDARDIH - Mere reza: 4500x3200 mm Ksdpfxox Rvaze Abbowt - Višina izpusta rezila: 65mm - Število vpenjal: 6 - Hitrost podajanja vozička: 12 m/min - Premer glavnega rezila: 300mm - premer osi 80mm - Premer predrezila: 160mm - premer osi 55mm - Glavni motor: 5,5kW - Skupne dimenzije: 7000x5000x2350mm - Serijska št.: AE/22614 - Leto: 2001 - Kompletno z navodili in CE deklaracijo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: Kwedpehvan Iofx Abbot • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Kwsdpfx Asd Akyzjbbot Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles Ksdpfxod Supge Abbowt MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Kwodsd Etkhjpfx Abbot Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Leto izdelave: 2020, Stanje: pripravljen za uporabo (rabljen), skupna masa: 220 kg, moč vretenovega motorja: 5.000 W, največja hitrost vretena: 10.000 obr/min, This SCM Class TI120 C was manufactured in 2020. It is a robust woodworking spindle moulder featuring a spindle tiltable by ±45° and a speed of up to 10,000 rpm. The machine offers manual adjustment with a digital readout for precision, and a main motor power of 5 kW. Ideal for detailed wood milling operations. Contact us for further information about this machine. • Table: 1200 × 810 mm • Spindle: • Tilting range: ±45° • Length: 140 mm • Speeds: 3000 / 4500 / 6000 / 7000 / 10,000 rpm • Max. tool diameter: 250 mm • Height adjustment: Manual with digital display • Tilt adjustment: Manual with digital display • Speed indication: Digital • Motor: Main motor power 5 kW • Extraction system: • Main extraction port: 1 × Ø120 mm • Table extraction ports: 2 × Ø80 mm • Required air speed: 20 m/s • Air requirement: 1550 m³/h • Fence: Wooden • Electrical: 400 V / 50 Hz / 3-phase • Noise level: 83.7 dB(A) • Safety: Motor protection switch Additional equipment: • Bandsaw unit (optional): • Wheel diameter: 400 mm • Wheel speed: 980 rpm • Max. cutting height: 400 mm • Max. cutting width: 380 mm • Blade length: 3835–3910 mm • Auxiliary table size: 620 × 450 mm Ksdjyarccspfx Abbowt • Table height: 890 mm (tiltable up to 20° to the right) • Max. saw blade size: 30 × 0.5 mm • Fence: Steel • Motor power: 1.5 kW • Saw blades included: 4 pcs