Scheer Mb 2 nakup rabljenega (72)

Stanje: rabljeno, Leto izdelave: 1985, Dolžina reza: 3100 mm Višina reza: nastavljiva od 0 do 45 mm Žagalna enota: zmogljiv trifazni motor 220/380 V, moč 1,8 kW Zgornja vpenjalna prečka zateguje se z ročnim kolesom Lokacija skladišča: Nattheim Kdjdpevvkazefx Ah Dou

Stanje: rabljeno, Scheer FM 2-3000 furnirska žaga, žaga za spajanje in fino rezanje Tip: FM 2-3000 Motor: 2,5 KM Št. stroja: 199540 Dolžina reza: 3000 mm Kdedoxf Tqwjpfx Ah Dju Premer žaginega lista: 180 mm Zadnja podporna miza Teža cca 300 kg.

Stanje: rabljeno, Rabljeni stroj Dolžina reza: 3000 mm Z vpenjanjem na ročno kolo Razpoložljivost: kratkoročno Kodpfxjw I Ul Aj Ah Dedu Lokacija skladišča: Röllbach

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, SCHEER TW 4-2 Stringer Milling Machine + HM 18E Router All equipment is in excellent, like-new optical and technical condition. Everything functions flawlessly. The unit comes from a hobby woodworker, so it has seen very little use and is basically as good as new. Ready for immediate operation. All machines are from 1998. These are professional-grade machines for commercial use – no DIY store junk. SCHEER TW 4-2 Stringer Milling Machine - Enables precise milling of treads and risers on stair stringers - Hand crank allows for processing of curved butt joint surfaces - Hardened guide shafts with the router mounted on a cross-slide - Ball bearing guide bushes ensure smooth, accurate, and safe movement of the machine - Two quick-release clamps allow for secure mounting to the stringer - Cross-slide features two stops each for longitudinal and transverse directions - Includes two positioning angles Kdsdexbt Ubepfx Ah Dju - Includes operating manual - Milling travel: 750 mm (longitudinal), 75 mm (transverse) SCHEER HM 18E Router - Very good condition, hardly any signs of use - Extremely robust due to triple-supported milling spindle - Highly accurate concentric running and flawless milling results - Precision column guidance and torsion-resistant milling table - Constant speed even under heavy load - High-performance motor (minimal signs of fatigue even during extended use) - Long service life thanks to soft start (full-wave electronics) - Bearings are in perfect condition - Designed for heavy-duty continuous milling operations - Excellent visibility of the cutter shaft; chips are efficiently cleared away by a powerful blower - Numerous accessories available for grooving, rebating, doweling, dovetailing, etc. - 220V, 2000W - Variable speed control: 10,000–18,000 rpm - Fully operational - Spindle mount: M16 internal thread (adapters and other mounts available on request) - Includes 30 mm pilot ring and dust extraction hood

Stanje: rabljeno, Cutting length: 3,000 mm Saw blade diameter: 180 mm Kedpfx Ahelf H S Hs Dsdu Motor: 2.5 HP Scheer FM 2-3000 veneer saw for sawing or cutting veneers or thin wood materials.

Stanje: rabljeno, Napetost materiala preko ročnega kolesa, največja dolžina reza 3000 mm, največja višina reza 60 mm. Lokacija skladišča: Nattheim Kodpfx Ahjvvkble Dodu

Stanje: rabljeno, Rabljeni stroj Kdedpfow I U Evex Ah Dju Stanje: Delujoč Tehnični podatki: Delovna dolžina: 3000 mm Vpenjanje z ročnim kolesom Agregat: 2 kW Razpoložljivost: Kratkoročno Lokacija skladišča: Hochheim

Stanje: rabljeno, Rabljeni strojDolžina reza 3000 mmz napenjanjem z ročnim kolesomRazpoložljivost: v kratkem rokuSkladišče: Solingen Ksdpfxjw I Uhds Ah Djdu

Stanje: rabljeno, Used machine Used veneer saw by Scheer, model FM 2 - 3000 Kdjdpfx Aowka Rdeh Deu Clamping via handwheel Integrated extraction system Cutting length: 3000 mm Mobile Availability: short-term Location: Röllbach

Stanje: rabljeno, Used machine Veneer splicing machine Machine number: 1262050 Kjdpfx Ahewka I Ns Dedu Motor power: 2.5 HP Motor speed: 2,810 rpm Cutting length: 3,100 mm Saw blade diameter: 180 mm Rear support board missing Manually movable Transport dimensions approx. 3,700 × 700 × 1,450 mm Weight approx. 200 kg Availability: approx. End of July Location: Cologne

Stanje: rabljeno, Leto izdelave: 1995, Used machine Year of manufacture: 1995 Technical data: Working length: 3000 mm Manual handwheel clamping Motor unit: 2 kW Kdodowi Adkjpfx Ah Dsu Availability: short-term Location: Hesse

Stanje: zelo dobro (rabljeno), FM 2/8 žaga za furnir 3100 mm, omejevalnik, odsesavanje Kdjdjxpvycjpfx Ah Dju

Stanje: rabljeno, Leto izdelave: 1996, maks. dolžina reza: 3100 mm; maks. višina reza: 45 mm; maks. globina reza: 515 mm; premer žaginega lista: 180 mm; gibanje pritrdilnega nosilca: pnevmatsko; sistem za paralelni prislon: ročno nastavljiv zobati prislon; prikaz prislona: skala; odsesovalni kanal: da; odsesavanje: zunanje odsesavanje; način podajanja: ročno; lepilno rezkalna enota: z diamantno prevlečenim žaginim listom (zaključni rez); tip stroja: stacionarno; teža pribl.: 850 kg; dimenzije: 4400 x 1180 x 160 mm; moč motorja: 2,2 kW; premer odsesovanja: 80 mm. Lokacija skladišča: Nattheim Ksdexnlcqspfx Ah Dedu

Stanje: rabljeno, Leto izdelave: 1981, Rabljeni stroj Letnik izdelave: 1981 Univerzalni stroj za vrtanje moznikov z nagibno vrtalno enoto s popolnoma avtomatskim upravljanjem z 2 varnostnima pnevmatskima pritrdilcema Motor vrtalnega menjalnika 2,2 kW z 21 vreteni Razmak med vreteni 32 mm z nameščenim oljnim dušilcem Višinska nastavitev 80 mm Globina vrtanja 80 mm s podvozjem Teža 420 kg Razpoložljivost: takoj Lokacija: Flörsheim Kdjdew I Ukrspfx Ah Deu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Used, in excellent condition, low operating hours Manufacturer: Scheer Model: FM5 - 3100 Year of manufacture: 1984 Machine no.: 41134 Motor power: 1.8 kW Saw feed / handwheel Kjdpsvld I Dofx Ah Dodu Cutting length: 3,100 mm Saw blade diameter: 180 mm Pneumatic clamping Rear support table Parallel fence Undercarriage Required space approx. 4,200 mm x 1,200 mm x 1,200 mm Location: 54634 Bitburg, loaded free of charge, unpacked Transfer in as-seen condition, as inspected, without warranty or guarantee

Stanje: rabljeno, Leto izdelave: 1991, Cutting length: 3100 mm Cutting height: 45 mm Motor power: 1.8 kW Dimensions: 4000 x 500 x 920 mm Ksdsr I E Hcjpfx Ah Djdu Weight: 450 kg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Panel dividing system PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year limited warranty Technical specification: Left-angle stop according to AGA 4383 Longitudinal cutting saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (continuously variable via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable externally (without opening the safety guard) - Saw unit with regulated DC drive: - Precise positioning (e.g. for cut-outs) - Slowed withdrawal from the cut - Includes safety guard interlock, lamella curtain SZ 5008 - Offcut cutting device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (separable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE-compliant Angle pressure device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material feed table HP 5021 (rear-mounted to FM 16): - Parallel stop with 6 spring-mounted clamping fingers Kdjdsxhg Ibspfx Ah Dju - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard disk - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connection (including wireless LAN) - Optimize cutting plans in office and send directly to the machine - Multitasking capable - Printing function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling operator console - Graphical display of cutting plans and workflows Additional equipment: Angle stop table HP 5043 (front side): - Machined steel angle, Pertinax table surface - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front side): - Pertinax surface - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 tapered (for scoring saw)

Stanje: pripravljen za uporabo (rabljen), Dolžina reza: 3100 mm, dimenzije stroja X/Y/Z: pribl. 4800 mm/1200 mm/1300 mm, teža: pribl. 800 kg. Ogled na lokaciji je možen. Kdodpfx Ahexd Aups Dju

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6608 TEHNIČNI PODATKI - število vreten: 21 kos - razmak skrajnih vreten: 640 mm - razdalja med vreteni: 32 mm - maks. globina vrtanja: 60 mm Kdsdpfoh I N Sqsx Ah Dsu - širina vrtanja v vertikali: 60 mm - regulacija vrtanja gor/dol in pod kotom - desni-levi svedri, pritrjeni z imbus vijaki - pnevmatska pritisnila: 2 kos - velikost delovne površine mize: 490x1040 mm - višina do delovne površine mize: 920 mm - glavni motor: 2,2 kW - delovni tlak: 6-8 bar - dimenzije dolžina/širina/višina: 2830/1150/1320 mm - teža: 442 kg - nemška proizvodnja - originalna DTR dokumentacija - nelakirana - mobilna Cena brez DDV: 7900 PLN Cena brez DDV: 1850 EUR, odvisno od tečaja 4,25 EUR (Cene se lahko razlikujejo ob večjih nihanjih)

Stanje: rabljeno, Leto izdelave: 1992, Proizvajalec: Scheer Tip: FM8-3100 Rabljeni stroj Ni v delujočem stanju Tlačna letev je ukrivljena; potrebno jo je popraviti Leto izdelave: 1992 Kedpfx Ahsxdpkko Djdu Oprema in tehnični podatki: Dolžina reza mm: 3.100 Višina reza mm: 45 Premer žaginega lista mm: 180 Globina do omejevalnika mm: 500 Glavni motor kW: 1,8 Pnevmatske sponke Zadnji omejevalnik Teža pribl. kg: 400 Lokacija: Röllbach Razpoložljivost: takoj

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, with 2 drilling beams used, in good condition Manufacturer: Scheer Model: DB 3 Year of manufacture: 1982 Machine no.: 73021 Ksdpfov Trlmox Ah Dsdu Number of spindles: 25 pcs Number of drilling beams: 2 Spindle pitch / spacing: 32 mm Drilling from above Hydraulic feed brake: 2 pcs Stop ruler: 1 pc approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 strokes Drill chuck: M 10 Swing stops: 3 pcs Clamps: 3 pcs Drilling programs: 4 pcs Required space: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Will be in stock at 54634 Bitburg by end of April – free on truck – Sale in "as-inspected" condition, no refurbishing, no warranty or guarantee

Stanje: rabljeno, Cutting length: 3050 mm Workpiece clamping: Handwheel Extraction unit: yes Kdsdpfx Aem H Uxyoh Dsu

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PA 4136, dolžina rezanja (maks.): 3.100 mm, višina reza z zareznim rezilom (max.): 70 mm, hitrost pomika os X: 40 m/min, hitrost podajanja os Z: 50 m/min, glavni premer žaginega lista: 305 mm, skupna masa: 3.000 kg, priključek za stisnjen zrak: 6 letvica, zahteva za prostor dolžina: 7.550 mm, potrebna širina: 5.450 mm, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Panel Dividing Saw SCHEER PA 4136 We offer a used panel saw for dividing wood-based materials. The machine will remain in operation until the end of September or can be dismantled by the buyer by arrangement until then. At the beginning of October, we will dismantle the machine ourselves. The price will then increase by the cost of dismantling. Functionality: Fully operational CE-compliant and dust-tested (threshold value < 2 mg/m³) Technical Main Data & Features: - Longitudinal saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatically lowered during return) - Feed drive via three-phase geared motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction ducts in machine base & pressure beam - Scoring saw adjustable from the outside (without opening the hood) - Protective hood interlock with lamellar curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts down to 5 mm Pjdewrn Efomd Haypogr [original, unclear text] - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with pressing claw for crosscuts - Adjustment range: 2400 mm - Fully automatic, DNC-AT controlled - Material feed table HP 5091 - 2 overhead guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min Kdodpfx Aow Tlvcoh Dou - 6 clamping fingers, 4 double roller conveyors - Table length: 3100 mm | Stop depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Operating System: MS DOS - Multifunction keyboard in pivoting control panel - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization on the machine PC via parts list entry - Processing via USB, floppy disk or online (optional) - Manual, automatic & special operating modes (e.g. grooving, veneered parts) Additional Equipment: - Angle stop table HP 5085: 1,720 x 800 mm | Pertinax surface - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax surface - Air cushion device LK 5030 integrated into both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical

Stanje: zelo dobro (rabljeno), Veneer Saw Kodpfxjvbzpke Ah Dedu Front Support Table Pneumatically Controlled Pressure Beam Rear Table Consoles with Angle Stop Extraction Duct Cutting Length: 4200 mm Cutting Height: approx. 50 mm Motor Power: 3.0 kW, 400 V, 50 Hz Saw Blade Diameter: approx. 180 mm Dimensions (L x W x H): approx. 5800 x 1350 x 1200 mm Notice for used machines: • Technical specifications are non-binding; subject to errors and prior sale. • The stated price is ex-site, loaded free of charge. • Machines have been cleaned and functionally tested. • All machines are sold as seen, without any claim to warranty. Buyers are free to inspect the machines at their location. • Special arrangements are only possible in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1982, Rabljeni stroj Stanje: dobro Oprema in tehnični podatki: Dolžina reza mm: 3.100 Višina reza mm: 45 Premer žaginega lista mm: 180 Globina do prislona mm: 500 Glavni motor kW: 1,8 Pnevmatske objemke Zadnji prislon Kdodpfx Ahsw I Ulps Dou Teža cca kg: 400 Lokacija: Hochheim Razpoložljivost: kratkoročno