Ročna Vrtalnik nakup rabljenega (1.068)

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in structural steel: 12 mm Spindle mount: 19 mm Weldon Motor output: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm This special battery-powered magnetic base drilling machine is designed for use in remote locations where no mains power is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that displays signals in green and red to indicate the current status of the drill and provide safety notifications. Duedpfxoyrhtns Af Ssr This machine can be used on convex (minimum diameter – 80 mm) and concave (minimum diameter 1000 mm) materials. With the PRO-36 PM Battery equipped with the CAS LiHD 10.0 Ah battery pack, up to 47 holes (D=20 mm) can be drilled in 10 mm steel plates. Features and benefits: • LED monitoring system flashes green when insufficient adhesion is detected, for example due to a gap or workpieces that are too thin • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor in the event of machine failure or magnetic detachment • Control panel is fitted with so-called "vandalism-proof" illuminated motor start/stop buttons Standard delivery set: • Cordless drill with cooling system • Plastic case • 4.0 Ah battery • Handle (3 pieces) • Safety strap • 4 mm Allen key with handle • Operating instructions OPTIONS (PRICES ON REQUEST): Charger Pressurised cooling system Vacuum pad Vacuum pump Pneumatic ejector

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T magnetic drilling machine is suitable for drilling and thread cutting. Dsdpoyrhrwefx Af Sour The powerful motor with variable speed allows milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to the clockwise and counterclockwise rotation, threads up to M20 can be cut with the new threading system from Promotech. The two-speed gearbox with stepless speed adjustment enables the optimal setting depending on hole diameter, steel grade, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies operation and increases operator safety. Features and benefits: • Powerful motor with robust 2-speed gearbox • Electronic speed stabilization system (ESSS) for constant RPM regardless of load changes • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheat protection • Sturdy design for longer tool life • Tilt sensor stops the motor in case of machine breakaway • 360° visualization indicates current machine status and provides safety and diagnostic information, e.g., worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy-saving base (ESB) consumes only 50% power in standby • Semi-automatic spline adjustment for easy, fast, precise, and repeatable guide clearance setting without expertise • Intuitive control panel at the top of the drilling machine • Large coolant tank Standard scope of supply: • Magnetic drilling machine • Plastic case • Handles (3 pieces) • MK3 arbor with 19 mm (3/4") Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5-mm T-handle hex key • 4-mm hex key • 2.5-mm hex key • 8-mm combination wrench • Operating manual OPTIONS (PRICES ON REQUEST): Pressure cooling system Pipe attachment

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,695 Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.45 kW Length: 316 mm Width: 235 mm Height: 328 mm Weight: 11.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm The PRO-36 Battery is a magnetic drilling machine designed for drilling holes up to 36 mm in diameter using annular cutters. The machine can also drill holes of up to 12 mm in diameter when using twist drills. The cordless drilling machine is equipped with an LED monitoring system that displays signals in green and red to indicate the current machine status and provide safety information. The control panel features “vandal-resistant” illuminated start/stop switches (green/red). Features and benefits: • LED monitoring system indicates the current machine status and provides safety information • The LED monitoring system flashes green if insufficient adhesion is detected, e.g. caused by a gap or workpieces that are too thin • The double guide system ensures exceptional precision and maintenance-free operation • Overload protection • Magnetic field sensor automatically stops the motor when holding force is insufficient • Magnetic Field Shape Control (MFSC) provides maximum holding strength, even on thin materials • The Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running • Innovative intelligent magnet with reduced weight Standard delivery package: • Cordless drilling machine • Plastic case • 4.0 Ah battery • Handle (3 pcs) Djdpoyrhqtefx Af Sjur • Safety strap • Cooling system • 4 mm Allen key with handle • User manual OPTIONS (PRICES ON REQUEST): • Charger • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Price: €595 Drilling capacity in structural steel: 12 mm Holder: 19 mm Weldon Motor power: 0.1 kW Length: 175 mm Width: 250 mm Height: 312 mm Dsdpjyrhqmsfx Af Ssur Weight: 10 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 51 mm Stroke: 70 mm Motor speed: 350 rpm The PRO-36 drills holes up to 36 mm in diameter using annular cutters. The machine can also drill holes up to 12 mm in diameter using twist drills with 19 mm (3/4") Weldon shank. The compact design and excellent weight-to-power ratio make this magnetic drill a very popular choice among customers. Features and Benefits: • Dual guide bar system ensures exceptional rigidity and maintenance-free operation • Compact size and ultra-lightweight—ideal for construction site use • Robust, one-piece slide and gearbox housing for added stability • Specially designed heavy-duty motor and gearbox • Service-friendly design guarantees easy operation • Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials • Magnetic Adhesion Control Module (MPAC) senses the holding force of the electromagnetic base, protecting both operator and machine when working on thin workpieces Standard Scope of Delivery: • Magnetic core drilling machine • Metal case • Swarf/bit guard • Coolant bottle unit • Safety chain with snap hook • Allen key, size 4 • Operating instructions • Standard shipping weight: 16.7 kg OPTIONS (PRICES ON REQUEST): - 2 litre coolant system - Vacuum pad - Pneumatic ejector - Pipe attachment

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Price: €995 Drilling capacity in structural steel: 23 mm Holder: 19 mm Weldon Motor power: 1.15 kW Length: 331 mm Width: 254 mm Dujdpfsyrhp Nex Af Ssr Height: 456 mm Weight: 15.5 kg Max. drilling capacity: 23 mm Max. annular cutter capacity: 50 mm Max. cutting depth: 50 mm Stroke: 160 mm Motor speed: 240 / 480 rpm Min. workpiece thickness: 6 mm The PRO-50, equipped with a specially developed motor and a 2-speed gearbox (240/480 rpm), is optimized to provide optimal speed for working with HSS cutters up to Ø 45 mm and twist drills up to Ø 23 mm. The rigid construction, optimized through FEA software (Finite Element Analysis), extends tool life and enables a cutting depth of up to 75 mm. Its compact design and innovative, intelligent magnet with reduced weight make the machine extremely lightweight. The PRO-50 delivers maximum holding force on thin materials thanks to magnetic field shape control (MFSC). Both the drill and operator are protected when working on thin workpieces by the magnetic force adhesion control module (MPAC). Additionally, the PRO-50 features an Energy Saving Base (ESB) that consumes only 50% of its power when the motor is off. Features and benefits: • Compact construction with excellent weight-to-performance ratio • Specially developed motor • Motor speeds: 240/480 rpm (under load) • Spindle with MT2 taper • Innovative, intelligent magnet with reduced weight • Rigid construction extends tool service life • Large stroke allows use of long tools • Motor cable with additional protective cover • Magnetic field shape control (MFSC) provides maximum holding force on thin materials • Magnetic force adhesion control module (MPAC) monitors the holding force of the electromagnetic base and protects both operator and machine when working on thin workpieces • Energy Saving Base (ESB) uses only 50% power when the motor is not running Standard delivery set: • Magnetic drilling machine • Plastic carrying case • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 2.5 mm Allen key • 5 mm Allen key • 5 mm Allen key with grip • 8 mm combination wrench • Operating manual Options (prices on request): • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,055 Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 1.1 kW Length: 400 mm Width: 126 mm Height: 185 mm Weight: 10 kg Max. drill capacity: 12 mm Max. annular cutter capacity: 40 mm Max. cutting depth: 40 mm Stroke: 45 mm Motor speed: 370 rpm Min. workpiece thickness: 6 mm The PRO-40 AD is a low-profile magnetic drilling machine that can be used even in the tightest spaces. It is the perfect solution for any application where conventional magnetic drills are too large for confined areas. Its powerful motor enables drilling holes up to 40 mm in diameter and up to 40 mm deep. An innovative, extremely strong magnetic base with a high performance on air gaps allows operation even on painted, corroded, or thin surfaces. The magnetic adhesion control (MPAC) protects both the drill and the operator by preventing the motor from being activated if the holding force is dangerously low when working on too thin or unsuitable surfaces. The PRO-40 AD is compatible with both carbide and HSS cutters as well as twist drills with 19.05 mm Weldon shank. Features & Benefits: • Ultra-compact magnetic drilling machine with only 185 mm height • Extremely strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design—only 10 kg • Annular cutting capacity up to 40 mm • Suitable for twist drills with 19.05 mm (3/4") Weldon shank • Extended stroke of 45 mm allows cutting depths up to 40 mm • Magnetic field shape control (MFSC) for maximum holding force on thin materials • Integrated swarf protection • Removable feed handle (with ratchet), can be mounted on either side • Carry handle for easy transport • Integrated cooling system with coolant bottle Standard set includes: • Drilling machine • Plastic carry case • Handle • 6.34 x 102 mm pilot pin for HSS cutters • 7.98 x 103 mm pilot pin for TCT cutters • Safety strap Dedpfeyrhp Asx Af Sour • 4 mm Allen key • Operating instructions OPTIONS (PRICES ON REQUEST): Cutter extension 250ml coolant bottle

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Djdeyrhppopfx Af Seur Price: €1,445 Holder: 19 mm Weldon Motor output: 1 kW Length: 307 mm Width: 221 mm Height: 317 mm Weight: 13.5 kg Max. core drilling capacity: 36 mm Max. cutting depth: 51 mm Stroke: 70 mm Motor speed: 350 rpm Min. workpiece thickness: 6 mm The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current status of the drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation in automatic mode. The drill control continuously selects the most effective operating conditions based on the relationship between motor load, feed rate, and the permissible cutting parameter range for the specific tool type and bore diameter. This results in longer tool life for HSS and TCT cutters and improved machine performance. Countersinking and machining thin workpieces is only possible in manual mode when clamping force is insufficient (blinking green LED). A safety strap protects the machine from falling in the event of a loss of magnetic hold. Features and benefits: • LED monitoring system displays the current status of the drill and provides safety and diagnostic data. • The LED system blinks green if inadequate adhesion is detected, such as with gaps or thin workpieces. • Auto Feed Smart Drive optimizes milling parameters for each tool, depending on type (HSS or TCT) and hole diameter from 12 mm to 36 mm, significantly extending tool life. • The tilt sensor stops the motor if the machine tips. • Dual-rod guide system ensures exceptional rigidity and backlash-free operation. • Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials. • Automatic feed control stops the machine as soon as the cutter passes through the workpiece. • Protection against automatic restart after power failure. • Compact, robust design with ultra-lightweight construction (13.5 kg). Standard scope of delivery: • Drill • Metal case • Safety strap • Coolant tank • Chip guard • 4 mm Allen key • Operating manual

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 18752, Ponudba 26123 Tehnični podatki: Duodeyzpxxepfx Af Ser - Postopek upogibanja se izvaja ročno s podporo protiuteži - Vpenjanje zgornje cevi s stranskim ekscentričnim vzvodom + nožno pedalo - Največja delovna širina: 2040 mm - Največja debelina materiala St 40: 1,50 mm - Nastavitev kota upogiba preko končnega omejevalca: 10 – 180° - Največji hod zgornje letve: pribl. 70 mm - Največja nastavljivost upogibne letve: 10 mm - Potreben prostor: pribl. Š 2800 x V 1200 x G 900 mm - Teža: pribl. 550 kg

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 9928, Ponudba 26122 Tehnični podatki: Dusdpeyzpu Hofx Af Ser - maks. delovna širina: 2020 mm - maks. debelina materiala: 1,25 mm - kot reza: 2,0° - izvlečna sprednja podpora za material - zadnji omejevalnik nastavljiv z ročnim kolesom: 5 – 500 mm - višina mize: 850 mm - potrebni prostor: pribl. Š 2450 x V 1150 x G 1400 mm - teža: pribl. 600 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 1.400 obr/min, vrtljajska hitrost (min.): 32 obr/min, globina grla: 355 mm, skupna masa: 1.700 kg, zmogljivost vrtanja: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Model: BK50 AI Drilling capacity in steel: 50 mm Throat depth: 355 mm Dedpfsvytw Djx Af Seur Spindle taper: MK5 Speed range: 32 – 1,400 rpm Table size: 770 x 640 mm Clamping area: 630 x 550 mm Base plate: 490 x 530 mm Machine weight: 1.7 t The machine can be inspected at our warehouse in 09599 Freiberg.

Stanje: dober (rabljeno), Drilling capacity in steel (diameter): 25.0/30.0 mm Throat depth: 260 mm Quill stroke: 120 mm Spindle speed range: 80–1400 rpm Duodeuhhzhopfx Af Ssr Table clamping surface: 410 x 390 mm Total power requirement: 0.8/1.5 kW Machine weight: approx. 250 kg Space requirement: approx. 0.75 x 0.6 x 1.15 m

Stanje: novo, Leto izdelave: 2024, Condition: New Year of manufacture: 2024 Stock number: 3982 Delivery time: immediate, subject to prior sale Country of origin: Spain Price: €10,830 Lease rate: €207.94 In stock: 1 Drilling capacity in structural steel: 35 mm Spindle taper: MK 4 Throat depth: 300 mm Infinitely variable spindle speeds: 100 - 2,000 rpm Motor power: 3 kW Thread cutting capacity: up to M27 Dodowiqvuspfx Af Sour Length: 1100 mm Width: 600 mm Height: 1950 mm Weight: 360 kg Feeds: 0.10 / 0.20 / 0.30 (3) mm/rev Max. drilling depth: 150 mm Column diameter: 125 mm Spindle-table distance: 90 - 890 mm Spindle-base distance: 1250 mm Table size: 480 x 480 mm Brand: ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP APPLICATIONS High-performance belt-driven pillar drilling machine with automatic feed. Single-stage V-belt drive with infinitely variable speed control via frequency inverter and digital speed display. 3 automatic feeds. Safety chuck guard. Thread cutting device. Machine base plate with machined support surface and T-slots with integrated coolant system. Integrated lighting. Quick and precise adjustment and monitoring of speed without shifting gears or preset steps. Fewer mechanically stressed parts for low-wear operation and smooth running. Compact design with high performance. Height-adjustable, tilting, and swiveling work table. Thread cutting device. CE compliant. Operating manual in GERMAN.

Stanje: zelo dobro (rabljeno), For sale: Professional German multi-spindle paper drill HANG 106 DTK 20. This is an industrial-grade machine, ideal for binderies, print shops, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/Paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau gear motor, 50/60 Hz Stable cast iron construction Adjustable worktable The machine is complete and ready for operation. Technical condition: Very good. Used, but well maintained, no play, with original nameplates and operating documentation. Duodpfx Afeudl Anj Sor

Stanje: zelo dobro (rabljeno), Four-head paper drilling machine. Several units available!!! Brand: Hang Model: 106DTK4 Details: 4-head paper drilling machine with adjustable drilling heads Operation: Electric foot switch, 2 speeds Available immediately The following additional information is standard for this model. Details should always be thoroughly inspected during a site visit. The Hang 100DTK4 printing machine from 1975 is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, this machine offered advanced features for its time and set the standard for high-quality and efficient printing. The Hang 100DTK4 features a robust and durable construction, ensuring stability and consistent performance during the printing process. While its printing technology is conventional by today’s standards, it allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various print formats and configurations. Operation required skilled operators who were able to achieve accurate and repeatable print results. The machine’s capabilities extended to various substrates, including paper, cardboard, and lightweight boards, accommodating a range of common printing applications of its time. Duedpfx Aeudl Ikef Sjr Launched in 1975, the Hang 100DTK4 represented a technological advancement of its era. Its lasting performance and contribution to the printing industry are noteworthy. While more modern printing machines with advanced digital technology have since emerged, the Hang 100DTK4 remains a historic symbol of efficiency and innovation in the 1970s printing sector. This machine is collectible and stands as a testament to the evolution of printing technology over the decades.

Stanje: dober (rabljeno), Drilling capacity: 13 mm Spindle taper: B 16 6 spindle speeds: 410 – 3400 rpm Dujdpfjwnfarsx Af Sjr Drilling depth: 60 mm - Adjustable drill head height - Motor with pole-changing function Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Stanje: dober (rabljeno), Univerzalni vijačnik, gradbeni vijačnik, vijačnik, elektronski vijačnik, ročni vrtalnik Dujdpfx Ajfc Hfyef Sor - Nazivna moč: 740 W - Maks. premer svedra: Ø 13 mm - Priključek: 220 V - Količina: 1 kos na voljo - Dimenzije: 450/210/V80 mm - Teža: 4,3 kg/kos

Stanje: dober (rabljeno), Ročna hidravlična črpalka, ročna črpalka, hidravlični cilinder, ročna hidravlična črpalka, visokotlačna črpalka, visokotlačna ročna črpalka, ročna hidravlična črpalka, hidravlična črpalka - Proizvajalec: RARIPRESS, ročna hidravlična črpalka/visokotlačna črpalka - Tip: RP 62C - Tlačno območje: maks. 700 bar Dsdpoyzmvhjfx Af Ssur - Količina: 1x ročna črpalka na voljo - Dimenzije: 580/185/H180 mm - Teža: 14,7 kg

Stanje: rabljeno, Drilling capacity steel/CI: 15 mm Spindle taper: 1 Morse taper Throat: 300 mm Table size: 210 x 300 mm Duedpfx Asvxpp Hjf Sor Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Required space: 850 x 420 x 1860 mm Weight: 220 kg

Stanje: rabljeno, Leto izdelave: 1971, Drilling capacity (steel/cast iron): 23 mm Spindle taper: 3 MT Throat depth: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 – 1180 rpm Feeds: 0.1 / 0.6 / 0.25 mm Drive motor: 380 V, 1.25 / 2.15 kW Dsdpferz Nqajx Af Sjur Required space: 850 x 400 x 1770 mm Weight: 280 kg

Stanje: pripravljen za uporabo (rabljen), Drilling capacity in steel/cast iron: approx. 25 mm Spindle taper: 2 MT Throat depth: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Dusdpfx Asv Du Rasf Sor Drive motor: 380 V, 1/1.5 kW Required space: 800 x 400 x 1800 mm Weight: approx. 280 kg

Leto izdelave: 1984, stanje: pripravljen za uporabo (rabljen), Drilling capacity steel/cast iron: 18/23 mm Spindle taper: 2 MT Throat depth: 250 mm Table size: 250 x 370 mm Spindle speeds: 400 - 5000 rpm Drive motor: 0.48/0.6 kW Dujdpfx Afok Tzu Re Ser Required space: 750 x 500 x 1670 mm Weight: 130 kg

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 331/43, Drilling capacity: 3 mm Throat depth: 100 mm Dedpefnbgqofx Af Ssur Spindle speeds: 6300 and 9000 rpm Drive motor: 380 V, 0.18 kW Dimensions (L x W x H): 470 x 250 x 520 mm Weight: 39 kg

Stanje: novo, številka stroja/vozila: 37 R9633-2, Drilling diameter with twist drill up to: 13 mm Drilling diameter with core drill up to: 35 mm Drilling stroke: 115 mm Dedec N T Hrjpfx Af Seur Drive power: 680 W Electrical connection: 220/240 V Magnetic base dimensions: 92 x 172 mm Weight: 13 kg

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Spindle Press by Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition Technical specifications based on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust hand-operated spindle press (often referred to as a punch press), primarily used in locksmith shops, workshops, and the metalworking industry for applications such as straightening, bending, pressing-in, or punching. Here are the typical technical specifications for this model: Technical Details (Indicative Values) Since these machines were produced over several decades, specifics may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (the "71" designation usually refers to the frame width; the force results from the spindle pitch and flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on spindle length) Throat depth: approx. 250 – 300 mm (distance from spindle center to frame) Table surface: approx. 500 x 400 mm Daylight opening: max. approx. 400 – 500 mm (with spindle fully raised) Flywheel diameter: approx. 1,000 – 1,200 mm Machine Features Design: Massive cast iron C-frame for high rigidity. Drive: Manual via large flywheel; energy is generated by the inertia of the wheel during lowering. Table: Usually equipped with a central through-hole and T-slots for tool mounting. Weight: The net weight typically ranges between 700 kg and 950 kg, ensuring a stable setup (foundation bolting generally required). Gemini stated: The dimensions of the Hiller & Lutz HP71 depend significantly on whether only the machine body or the entire space requirement, including the flywheel overhang, is considered. Here are the specific dimensions for this model: Dusdswxyn Ejpfx Af Sjr Base machine dimensions (body only) Height: approx. 1,800 mm to 2,100 mm (depending on spindle position). Width (frame): approx. 500 – 600 mm. Depth (base): approx. 800 – 1,000 mm.

Stanje: pripravljen za uporabo (rabljen), Alzmetall AB3 HST vrtalni stroj, stebrni vrtalni stroj Iztek vretena: 280 mm Hod vretena: 140 mm Celotna površina mize: 750 mm x 620 mm Pritrdilna površina: 600 mm x 460 mm Veseli bomo vašega obiska za ogled stroja. Na vašo željo lahko organiziramo tudi cenovno ugodno dostavo. Prejmete ustrezen račun. Za tuje stranke lahko izdamo tudi neto račun. Pogoj je veljavna ID številka za DDV. Vmesna prodaja pridržana. Duedeywumyepfx Af Sjr Obiščite našo trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih imetnikov in služijo izključno za identifikacijo in opis izdelkov. Možna so odstopanja od tehničnih podatkov in napake v opisu predmeta ter so pridržana.