Riveter nakup rabljenega (94)

Stanje: dober (rabljeno), pneumatic riveting tool, rivet nut tool, blind rivet nut tool, pneumatic rivet tool, blind rivet gun, blind rivets -Pneumatic rivet gun -Application range: 2.0 to 4.0 mm Lasdpfx Ahsgzhxts Deh -Dimensions: 275/80/H220 mm -Weight: 1.3 kg

Stanje: novo, skupna masa: 42.000 kg, največja dovoljena obremenitev: 33.190 kg, konfiguracija osi: 3 osi, Oprema: ABS, Frame * Standard ladder-type frame made of lightweight steel construction with through-bolted crossmembers * With chassis frame camber (pre-cambering) * Coupling plate approx. 8 mm thick, with a 2-inch king pin in accordance with DIN 74080 / ISO 337 Chassis * For indivisible loads, an increase of the total towing weight is permissible * Axle lift on axle 1, fully automatic, load-dependent control of the axle lift * Manufacturer of choice: Kögel * Tri-axle assembly with disc brakes, Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm stroke Vehicle tyres * Wheels with internal sensors according to UN ECE R141 * Tyres: 6 x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims, size 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis attachments * Landing legs (manufacturer of choice from Kögel), mechanically operated with compensation foot, approx. 24 t lifting capacity. Single-sided operation on the right in travel direction * Spray suppression system according to Regulation (EU) No. 109/2011 * 1 pair quarter-circle mudguards in front of the axles * 1 pair straight mudguards with mudflaps between the 1st and 2nd axle * 1 pair quarter-circle mudguards with mudflaps behind the axles * 2 wheel chocks with holders * Side guard according to ECE-R73 * 2 waterproof plastic toolboxes, inside dimensions approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right * Retractable access ladder at the rear right Ledpexcdmqofx Ah Djah * High, rigid rear underrun protection made of steel, according to ECE-R58 * 1 pair each of extendable, retro-reflective red/white warning boards for oversized loads, with LED lighting, spiral cable and plug connection. Positioned at the front and rear vehicle section Braking / Air suspension system * 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 connector * EBS system (manufacturer of choice from Kögel) * Air suspension system incl. 1 lifting and lowering valve, installed on the left behind the axle assembly in direction of travel. Ride height is set automatically * 2 non-interchangeable coupling heads at the front, ISO 1728 * Steel air tanks for brake system and air reserve (EN 286-2) Floor * Plate floor approx. 30 mm thick * Floor circumferentially sealed * Stake pockets for square tube insertable stanchions approx. 80 x 80 mm, positioned according to drawing J9: 8 rows of stake pockets (18 pockets per row: 4 outside + 10 in the center per row) Front wall * Storage for max. 14 insertable square tube stanchions approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with volumetric corner posts made of steel, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall as per EN 12640 Side wall * VarioFix steel punched exterior frame * 24 pairs of lashing rings on the outer frame (to EN 12640), permissible pull force approx. 5,000 kg per ring Impact protection * 1 pair of steel buffer blocks, approx. 160x85x85 mm, mounted on the outside of the rear end plate * Crosswise zinc-plated steel angle as forklift protection, including latch protection in the center, mounted on the rear end plate Electrics / Electronics * Lighting bracket made of steel, positioned above the

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, Tip: AVTOMATSKI KOVIČASTI STROJ Proizvajalec: SICoM srl., Italija Model: MP1R-E Leto: 2017 Avtomatski stroj za kovičenje, z električnim motorjem za kovičenje. Varjen jekleni okvir omogoča uporabo inox kovic. Podajalnik je enostavno zamenljiv in omogoča uporabo vseh vrst kovic. Vse funkcije nadzira mikroprocesor, na voljo sta delni števec z možnostjo ponastavitve ter skupni števec. Med možnostmi so počasno delovanje za TEST ter VEČKRATNA NASTAVITEV za ponavljanje programiranega zaporedja določenega števila obročkov in časa med posameznimi nastavitvami. Tehnične lastnosti (prosimo, glejte priloženo brošuro). Navodila za uporabo in vzdrževanje so na voljo na zahtevo. Globina grla: 160 mm Dimenzije: 450x500x1400 mm Laedpfxoxgpgks Ah Djh Delovni cikel: 0,35 s Napajalnik: 220V, enofazni, 400W Teža: 70 kg

Stanje: rabljeno, Taumel Riveting Head BODMER KÜSNACHT Model FMK 3 Year of manufacture: approx. 1980 Rivet shank diameter: max. 10 mm Tool diameter: 12 mm Rivet head stroke: 40 mm Rivet spindle speed: approx. 1400 rpm Motor power: 0.37 kW Electrical connection: 380 Volt, 50 Hz Lajdpfx Ajglarleh Deh - Infinitely adjustable riveting pressure via hydraulic pressure - Micrometer stop for precise stroke limitation - Stroke movement via oil hydraulics (max. 45 bar) - Machined flange surface Ø 115 mm with fastening nut on the housing Total length: approx. 800 mm Weight: approx. 40 kg Good condition The riveting head is equipped with a multi-spindle head for simultaneously setting 2 or 3 rivets. However, this head can be removed, and the machine can be used in standard mode. For standard use, the usual oscillating head that holds the tool is missing.

Stanje: rabljeno, Leto izdelave: 1999, Manufacturer: NITTO SEIKO Laedpshzgqgofx Ah Djh Model: RS 601 Year of manufacture: 1999

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Various metalworking machines are available as remaining stock. 1/2/3) Three orbital riveting presses, Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) High-speed planer Schlenker & Cie Atlas W4, year of manufacture: 1961, weight: approx. 1700 kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of manufacture: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of manufacture: 1940s, retrofitted: 1964. 7) Mitre saw Berg & Schmid Mini Compact, year of manufacture: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection possible. Sale of individual items is possible. Lajdpfxsu Tuvco Ah Dsh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Press-in machine with automatic feed via hopper Lodpjld Thrsfx Ah Deah Automatic feeds available from above and below. Touch screen control with database for press-in force/fastener dependent settings Throat depth 450 mm Press-in force 56 kN Suitable for press-in fasteners up to M8/M10

Stanje: dober (rabljeno), Manufacturer: Dunkes Model: DN 2 Thrust: 2 t Lodpfovxrzlsx Ah Deah Maximum diameter: 12 mm Table dimensions: 210 x 200 mm Motor power: 0.55 kW Approx. machine weight: 130 kg Machine dimensions (approx.): 0.40 x 0.50 x 1.00 m

Stanje: rabljeno, Leto izdelave: 1988, Tip: Stroj za kovičenje Proizvajalec: ARNO Maskiner AB, Švedska Model: 1304 Leto: 1988 Stanje: popolnoma delujoč Laedpfxsxgpfte Ah Djh

Stanje: rabljeno, Oscillating riveting machine double riveting unit with rotary indexing table DUNKES Type DN 4 with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1,400 rpm Mounting height tool to counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable on the machine frame relative to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable microswitch - Control system upgraded and conversion to servo drive for the rotary table in 2009 - New electrical switch cabinet with Siemens Simatic Panel – 2009 - Riveting time infinitely programmable - Rivet pressure setting infinitely variable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0-60 mm Required floor space (L x W x H) 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition Machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually positioned on the carrier disc and fixed with straight rivet pins. The opposing riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair shops. Or for use in building a special purpose machine. Laodpfxsdzp T Ne Ah Djh

Stanje: zelo dobro (rabljeno), MyRef MY-ZB26-TFD Condensing Unit MyRef MY-ZB26-TFD Condensing Unit suitable for refrigeration applications Typical applications include: - Display freezers in supermarkets and convenience stores - Cold storage rooms - Beer cellars - Milk cooling systems Standard equipment: - Copeland Scroll compressor - ZB series with sound insulation hood - Oil sump heater - Liquid receiver with burst protection - Filter drier - Sight glass visible from the outside - Ball shut-off valves - Component-certified combined high/low pressure safety switch - Electrical equipment: IP 55 control cabinet, compressor contactor, DIN rail mounting - Condenser is securely integrated into the housing - Condenser fins coated with epoxy resin phenol (gold lacquer*) - High-quality housing: robust construction in 1.5 mm galvanized and powder-coated steel sheet, base plate and feet in 2 mm steel sheet - Frame design with individually removable panels; all screws and components accessible from the front with minimal effort - Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems - Pressure-controlled speed controller with EMC filter - Space-saving installation of multiple units side by side possible; required installation clearance 25 mm Type: MyRef-ZB26-TFD Copeland Scroll Condensing unit type: MyRef-ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dBA at 10 m Receiver volume: 6 liters Air volume: 4500 m³/h Refrigeration capacity: 9 kW Voltage: 400V, 3PH, 50Hz Current consumption: 8.9 A Dimensions: H x W x D: 715 x 1120 x 450 mm Weight: 102 kg Ljdevtl T Depfx Ah Djah You can find more items – new and used – in our shop! International shipping costs on request!

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Two similar-type Stanley rivet presses are available. Both machines come complete with ERF 23 and 23.1 rivet feeders. An on-site inspection is possible. Laodpswn Iabsfx Ah Djh

Stanje: dober (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Type of machine: Oscillating / Riveting Machine Manufacturer: STEINEL Model: No. 10 Year of manufacture: approx. 1988 Control: conventional Country of origin: Germany Terms of delivery: ex location, loaded free of charge Availability: immediate Technical Details Table area: 350 x 250 mm Throat depth: 250 mm Adjustable table: 400 mm Air pressure: up to 10 bar Total power requirement: 1.8 kW Machine weight approx.: 0.3 t Space requirement approx. LxWxH: 0.7 x 0.45 x 1.8 m Lodewxxw Sepfx Ah Djah Details provided without guarantee

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, 2-BLOW COLD HEADER NATIONAL M5 For the production of partially pierced parts Fully operational Recently overhauled! Number of dies: 1 Output (pieces per minute): 300 Rivet length: 20 mm Maximum piercing depth: 5 mm Laodpfxetxni Ns Ah Deh Cutoff diameter: 5 mm Floor space (width): 1,300 mm Floor space (length): 2,690 mm Main motor power: 7.5 kW Net weight: 3,100 kg Gross weight: 3,700 kg

Stanje: rabljeno, Riveting machine Hang 162-01 Year of manufacture: 1993 – SN. 39709 Working depth (throat): 620 mm Cycle time: 0.7 sec Rivet stroke: 55 mm Ljdpfx Ahov D H Htj Deah Working height: 1100 mm Rivet shank diameter: 2–4 mm Drive power: 0.37 kW Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, double-tubular rivets (with feeding of the rivet cap). Riveting machine designed for medium to large production runs. Online video inspection possible via WhatsApp, MS Zoom, or Telegram. In stock at Emskirchen/Nuremberg – available immediately – machine can be tested on site.

Stanje: rabljeno, We are selling various small machines from old stock. The following machines are available: - Welding machines - Grooving machines - Riveting machines - Punching machines - Pumps Laedpfx Asrn Syxsh Djh The pictures show only a small selection.

Leto izdelave: 2018, obratovalne ure: 1.256 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2189, OKUMA LB3000EX-II – Particularly well-suited for universal turned parts and the complete machining of complex workpieces thanks to generous flat-bed guideways, while high-torque drives ensure outstanding precision and long-term accuracy. TECHNICAL DETAILS Swing over bed: 580 mm Maximum turning diameter: 340 mm Workpiece length: 950 mm Travel distance X / Z / Y: 230 / 510 / 120 (+70/-50) mm C-axis: 360 / 0.001° Control: OKUMA OSP-P300LA Rapid traverse X / Z / Y: 25 / 30 / 12.5 m/min Stroke: 1015 mm Spindle speed: 4200 rpm Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm Toolholder: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6000 rpm Operating hours: 1,256 h Control on: 1,660 h MACHINE DETAILS Lajdpfsnt T Aujx Ah Djh Dimensions (L x W x H): 3,420 x 2,041 x 2,444 mm Weight: 6,600 kg Connection voltage: 400 V, 3 phase, 50 Hz Power consumption: 38.9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hob milling toolholder (see document in attachment) is not included in the scope of delivery.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of manufacture: 2012/13, power: 11 kW, frequency: 25 kHz, machine dimensions (X/Y/Z): approx. 2700 mm / 2000 mm / 2500 mm, control system: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting system, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible. Lasdpfx Aougmxvsh Djh

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M20I/8324, Številka ponudbe: M20I/8324 Vrsta stroja: Zakovica stiskalnica Proizvajalec: Carlo Salvi Tip: RF/635/SV Leto izdelave: 1985 Razpon premera: 2-6,35 mm Dolžina stebla pod glavo: 70(65) mm Lajdpfowi Udcox Ah Dsh Dolžina obdelovanca: 87 mm Zmogljivost kosov/min: 360(320) Lokacija: V Nemčiji

Stanje: rabljeno, PB300, EBZ tong cart, riveting pliers Ledpfoq S Umkjx Ah Doah Model: PB300 Type: TE-H 055.080.270.000 Condition: Used

Stanje: dober (rabljeno), Podwójna nitownica 105-06 Do nitowania mechanizmów na segregatorach ringowych oraz systemach dźwigniowych Z napędem z hamulcem silnika Podajniki nitów przystosowane do trzpienia o średnicy (przy zmiennej długości trzpienia i tolerancji średnicy główki nitu 2 mm) Standardowa konfiguracja do pracy z nitami rurkowymi o średnicy trzpienia 4 mm, długości do 19 mm, średnicy główki 6–8 mm lub 8–10 mm Lasdsuitctepfx Ah Dsh Możliwość pojedynczego nitowania poprzez wyłączenie lewej (i środkowej) głowicy nitującej Regulacja rozstawu nitów za pomocą pokrętła Szybka i precyzyjna nastawa dzięki zintegrowanej podziałce na stole roboczym oraz łatwo regulowanym ogranicznikom Wyzwalanie za pomocą elektrycznego wyłącznika nożnego lub trzech mikroprzełączników znajdujących się w tylnym i bocznym ograniczniku, co umożliwia szybkie i precyzyjne pozycjonowanie Z elektrycznym licznikiem elementów

Leto izdelave: 2019, obratovalne ure: 1.370 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, OKUMA GENOS L-3000 – Engineered for powerful machining and long service life across all batch sizes, thanks to box ways and heavy-duty turret design TECHNICAL DETAILS Swing over bed: 520 mm Maximum turning diameter: 300 mm Max. workpiece length: 450 mm Travel X / Z: 235 / 520 mm C-axis: 360° / 0.001° Control: OKUMA OSP-P300LA-e Rapid traverse X / Z: 25 / 30 m/min Stroke: 400 mm Spindle speed: 38 – 3,800 rpm Lodpent T Afefx Ah Djah Spindle nose: A2-8 Spindle bore: 80 mm Spindle bearing diameter: 120 mm Tool turret: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool spindle speed: 45 – 4,500 rpm Power-on hours: 5,267 h Control-on hours: 1,919 h Spindle run hours: 1,370 h MACHINE DETAILS Dimensions (L x W x H): 2,545 x 1,870 x 1,791 mm Weight: 5,000 kg Spindle power (20 min./continuous): 22 / 15 kW Spindle torque (20 min./continuous): 412 / 281 Nm Tool power (30 min./continuous): 7.0 / 3.3 kW Tool torque (30 min./continuous): 23.7 / 14.2 Nm

Stanje: pripravljen za uporabo (rabljen), A Böllhoff punch rivet tool is available. Documentation is provided. An on-site inspection is possible. Lasdpfsw E Iy Nox Ah Dsh

Stanje: rabljeno, Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M20I/9028, Ponudbena številka: M20I/9028 Vrsta stroja: Zakovični stiskalnik Proizvajalec: Carlo Salvi Tip: RF/GL Leto izdelave: 1972 Območje premera: 5-8 mm Ledpfjwzkydex Ah Doah Dolžina stebla pod glavo: 60 mm Maks. dolžina obdelovanca: 90 mm Zmogljivost kosov/min: 200 Lokacija: V Nemčiji

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M20I/9019, Številka ponudbe: M20I/9019 Tip stroja: Stiskalnica za kovičenje Znamka: Carlo Salvi Model: RF/635/SV Leto izdelave: 1985 Ljdpfx Ajwzknueh Djah Razpon premerov: 3-6,35 mm Dolžina stebla pod glavo: 65 mm Dolžina odseka: 87 mm Kapaciteta kosov/min: 360 Lokacija: V Nemčiji