Rezalnik Glavo nakup rabljenega (2.144)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Universal Tool Milling Machine DECKEL FP 1 With 3-axis digital readout Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 mm Y 160 mm Z 340 mm Speed range: 40 – 2000 rpm Including the following accessories: Chsdpfopxm Ansx Afqjf Universal table 600 mm x 250 mm clamping surface Swiveling vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vise 1 pc. steady rest with counter bearing 1 pc. long milling arbor Ø 22 mm Various tool holders S 22 x 2 Z-axis bellows Machine lamp Automatic central lubrication pump Chip tray Coolant system Operating manual THE MACHINE IS IN VERY GOOD CONDITION!!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table Chsdpscnwydefx Afqef High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: dober (rabljeno), Leto izdelave: 2023, Casemaker DE Pack QYKM-1400x2900 4-barvni fleksotisk s keramičnim in doctor blade sistemom Leto 2023 Maks. velikost: 1400x2600 mm Območje skip podajanja: 2180x4000 mm Min. velikost: 350x750 mm Codpfjxw Nmrex Afqehf Maks. hitrost: 200 kosov/min. Rotacijsko izsekovanje Vibracija Zlagalnik

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Olupljanje s frezalno glavo, maks. dolžina 6000 mm, 35 kW, z mehanizacijo. Chjdpsxpuzrjfx Afqjf

Stanje: dober (rabljeno), 230 RABLJEN Rezalnik kruha Jac. Chsdjxzq Swopfx Afqof TEHNIČNI PODATKI: - Debelina rezine: 11 mm, - Napajanje: 380 V. ZUNANJE MERE (v cm): - širina: 62, - globina: 75, - višina: 110. Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZKO, RUSKO IN UKRAJINSKO. V naši ponudbi najdete pekovske peči, vozičkaste peči, etažne peči, slaščičarske peči, trgovinske peči, pekovske stroje, linije za kruh, linije za žemlje, linije za pecivo, linije za rogljičke, stroje za bagete, mešalnike, mešalnike, valjarje, stroje za rogljičke. Oglejte si vse naše oglase.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, največja širina rezanja: 25 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 790 mm, skupna širina: 1.000 mm, skupna višina: 1.100 mm, vhodna frekvenca: 50 Hz, vhodni tok: 10 A, leto zadnje generalne obnove: 2025, potrebna višina: 1.100 mm, zahteva za prostor dolžina: 790 mm, potrebna širina: 1.000 mm, Wabäma rezalnik kruha Model: Classic S 300.260 Preprosta in robustna tehnologija Chjdpfx Afovkthqeqjf Nastavljiva debelina rezine od 3 do 25 mm Mere: 1000 x 790 x 1100 mm (Š x G x V) Maks. mere kruha: 300 x 200 x 160 mm (D x G x V) Priklop: 400V, 16A-CEE priključek Rabljeni stroj, očiščen + Servis rezervnih delov Možnosti: Dostavna storitev Vzdrževalna pogodba Rezervni noži Servisni paket Na zalogi imamo več kot 50 rezalnikov kruha!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual Cjdpfow Agxrsx Afqohf THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Csdpfxodqzcxe Afqjhf Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 1.400 mm, širina mize: 1.200 mm, S kovinsko mizo 1400x1200 mm Chsdpfxoxlabpo Afqof

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Ponudba vključuje: Polar 78 ES, letnik 2002, zelo dobro ohranjen, vključno s stranskimi zračnimi mizami, vključno z rezervnim rezilom, takoj dobavljivo Cedpfxextb H Ne Afqshf

Stanje: dober (rabljeno), 229 RABLJEN Avtomatski rezalnik kruha. TEHNIČNI PODATKI: - Debelina rezine: 10 mm, - Napajanje: 220 V. ZUNANJE MERE (v cm): - širina: 58, - globina: 90, - višina: 130. Csdpfx Afexzq I Eoqjhf Navedena cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO IN UKRAJINSKO. V naši ponudbi najdete pekarske peči, vozičkaste peči, etažne peči, slaščičarske peči, trgovinske peči, pekarske stroje, linije za kruh, linije za žemlje, linije za pecivo, linije za rogljičke, stroje za bagete, mešalce, mikserje, valjarje, stroje za rogljičke. Oglejte si vse naše oglase.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Premer vretena 30 mm Obojestransko nagibno -45,5° do +45,5° Motorizirano nastavljanje višine in naklona Brezstopenjska nastavitev hitrosti vrtenja 1500 do 10000 obr/min Velikost mize 1100 x 760 mm Moč motorja 7,5 kW Krmilna plošča zgoraj Litoželezne omejitvene čeljusti Regulacija višine 125 mm Sesalna priključka 2 x 120 mm Teža pribl. 900 kg BREZ pomikalne naprave Stroj bo na voljo predvidoma od januarja 2026 Chedpfx Afoxuniysqsf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: Cjdpfxsxu Hkce Afqehf - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: novo, Leto izdelave: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Solid German engineering Table milling machine with a fixed, single-sided tilting spindle for a tilting range from -5° to +45.5° Positioning control for height and tilt adjustment with zero set for height and incremental travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Chsdpfx Afjr Ig H Toqof Push buttons for spindle start and stop Left- and right-hand rotation Quick-release cutter clamping system Finely planed cast iron table with rigid frame support Control panel mounted at the bottom on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum split plates Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, fixed/non-interchangeable CE compliant GS tested Table size: 1100 x 760 mm Table height: 870 mm Milling spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light grey and RAL 5000 Violet blue Net weight: approx. 800 kg Features: Control panel on top Tilting ±45° Motor 7.5 kW Centrex Extendable frame support Location: in stock, 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 Chjdsu Nvxmepfx Afqef with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: novo, Leto izdelave: 2025, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Chedpfx Aod Hx Hmjfqjf Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system Cjdpfx Afjt Aav Ieqshf About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Kity Tilting Spindle Moulder 629 Motor: 2.2 kW / 400 Volt Table size approx. 580 x 715 mm Precision-adjustable fence Spindle tilting from +30° to -5° Forward and reverse spindle rotation Cedor Id S Eepfx Afqshf Speeds: 4,800 / 6,400 / 8,700 rpm Spindle travel: 130 mm Tool diameter up to 180 mm Extraction ports: 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm Chsdpfot Aarpex Afqef >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: dober (rabljeno), Leto izdelave: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Codpfjvk Dqvjx Afqjhf Pneumatic clamp Turret stop Material support Pneumatic foot pedal Location: in stock at 54634 Bitburg - immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: Cedjwpi Dqopfx Afqehf - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet Cjdpfevb Ud Uox Afqohf About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Cjdpfx Afju Racrjqehf Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Chodpeu T D Nrofx Afqsf Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power. Chodsu Nvwvepfx Afqef