Rezalnik Furnirja nakup rabljenega (1.645)

Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Hfeded Hx Hmopfx Af Teb Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10L0354745A, širina skobljanja: 410 mm, TERSA Cutterhead for SCM Surface Planer F410 • Planer knife width: 410 mm • Incl. ball bearings on both sides • Without planer knives • SCM part no.: 10L0354745A The cutterhead is new and has never been installed. Only minor signs of storage may be present. You will receive an invoice with itemized VAT. Payment: Advance bank transfer only – NO PAYPAL! Hfsdevftv Rspfx Af Tsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 216 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20MS090000/007, skupna dolžina: 3.000 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 2.500 mm, skupna višina: 1.900 mm, skupna masa: 1.450 kg, lastna masa: 1.450 kg, delovna širina: 900 mm, priključek za stisnjen zrak: 6 letvica, hitrost prepustnosti: 50 mm/s, Glue Application and Longitudinal Splicing Machine For veneer thicknesses from 0.4 to 3 mm with direct gluing. With edge pre-gluing up to 5 mm. Machine has seen very little use, Sold ex works. Separate electric motors for chain drive and glue application Glue is applied to the edge of the newly fed veneer strip, increasing the bond strength. Hfsdpfxew E Rfbs Af Tob Rugged, durable stainless steel conveyor chain with articulated joints Independent temperature, speed, and pressure adjustment Glue reservoir is quick and easily accessible for fast and simple refilling or cleaning Multiple heating zones allow for individual temperature settings Integrated cooling unit extends glue reservoir service life Continuously adjustable feed speed INCLUDES GLUE COOLER Technical Specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer thickness: 0.4 – 3.0 mm (up to 5 mm) Max. veneer moisture: 8 – 12% Working height: 900 mm Feed speed: 5 – 50 m/min Heated section length: 1000 mm Max. heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, laserska moč: 4.000 W, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 13.300 mm, skupna širina: 3.500 mm, skupna višina: 2.000 mm, Oprema: hladilna enota, varnostna svetlobna zapora,

Leto izdelave: 1987, Stanje: rabljeno, Joint cutter - Engine: Honda petrol engine - Power: 8.1 kW / 11 HP - Saw blade diameter: 400 mm - Quantity: 3 units available Hfedpfxjb A Hv Hs Af Teb - Price: per unit

Leto izdelave: 2021, Stanje: dober (rabljeno),

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 35 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002-045, Used CNC Cutter/Plotter – Cutting Area X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system featuring CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other sheet-type, semi-flexible or rigid non-metallic materials. Equipment of the used machine: • 1 cutting gantry and 1 multifunctional tool head The machine is sold with a powered rotary knife and a punching tool. • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipment includes a grey conveyor belt table. Turquoise exchange conveyor available (offers high contrast for dark materials) Additional tools can be retrofitted (on request): • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Powered rotary knife • UCT Universal cutting tool (drag knife) • KCT Kiss-cut tool • CTT Creasing tool • V-Cut Angle cutting tool • Printer mark detection • Camera-based registration • Punching tool for notches or holes • Milling tool with extraction device User-friendly: • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade changes • Vacuum zones can be activated with a click Fast payback: • Low cost with high added value • Optimum material utilization through nest expert software modules (not included) Hjdpfx Aofnlkwjf Tjfb • High speed • Consistent precision Technical Data: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeat accuracy: +/- 0.25 mm • Capable of single or multi-layer cutting • Suitable for both sheet and roll material (can be retrofitted with suitable unwinder) • Quick return on investment (Product photo for reference) The machine is CE certified.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Orodni rezkalni stroj Macmon M 100 NC Hitrost brezstopenjsko nastavljiva, Vpenjalni stožec SK 40 Sistem za hlajenje Navodila za uporabo Hfsdpfsx Hga Dsx Af Tjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Priključni podatki: Enofazni izmenični tok 50 ... 60 Hz Hfedpfxoxmhhys Af Teb Preklopna napetost 200/220/240 V ± 10% Poraba energije: 110 W Oddaja toplote: 95 kcal/h Uporaba: višina pred-tiska 3…12 1/2" // širina pred-tiska 148…470 mm Gramatura papirja: enoslojne 45…170 g/m2 // večslojne sklope 125 ... 300 g/m2 Višina sklada do pribl. 300 mm Stroj je deloval v proizvodnji skupaj z MICRO-FORMS LABELLER 18S (lepi nalepke na pole) // Ref. št.: 40016.25

Stanje: rabljeno, Leto izdelave: 1971, Funkcionalnost: popolnoma funkcionalen, 1. Machine Classification • Machine type: Rubber sheet/tread processing and winding system • Component designation: "R-Winder 1" 2. Functional Description • Transport of rubber sheet material • Controlled dispensing of rubber compounds and auxiliary lining or intermediate layer materials • Winding of processed rubber components into rolls suitable for downstream tire production processes 3. Mechanical Structure • Heavy-duty steel frame construction • Surface finish: Industrial green paint 4. Conveyor and Material Handling Systems • Wide flat belt conveyor system for transporting rubber sheets • Overhead mounting points for spools of lining and intermediate layer materials 5. Safety Equipment • Yellow safety fencing surrounding the operating area • Emergency stop buttons accessible to the operator 6. Control and Operator Interface • Local control panel • Integrated display screen • Physical push-button control • Integrated communication handset Some images show the machine in operational condition for presentation purposes only. Hedpfx Aex Iua Uef Tofb

Stanje: dober (rabljeno), Wood milling cutter, milling head, milling tool, wood router, profile cutter - Outer diameter: Ø 180 mm - Height: 35 mm Hfjdpfeciv Tbex Af Tsb - Radius - Bore: Ø 30 mm - Weight: 5.6 kg

Stanje: rabljeno, Leto izdelave: 1961, Funkcionalnost: popolnoma funkcionalen, Največja dolžina hloda: 1,8 m Hfsdex N Shlopfx Af Tsb Največji premer hloda: 0,8 m

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025-078, delovna širina: 1.600 mm, delovna višina: 100 mm, največja širina rezanja: 1.600 mm, število mest v zalogovniku orodij: 2, Used machine CNC Cutter/Plotter Cutting area in X and Y: 1,500 x 1,600 mm (demonstration machine) Multi-functional CAM cutting system with CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other sheet-type, semi-flexible or rigid, non-metallic materials. Features of the used machine: • 1 cutting bridge and 1 multifunctional tool head Hfedpowgc I Rsfx Af Teb • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipped with grey conveyor belt table • Max. material height: 100 mm Further tools can be added (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Print mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system User-friendly: • Easily changeable cutting tools, "PLUG & CUT" • Intuitive user interface • Quick blade change • Vacuum zones activated at the click of a button Fast return on investment: • Low costs with high added value • Optimum material utilization with nest expert software modules (not included as standard) • High speed • Consistent precision Specifications: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (extendable with optional unwind unit) • Fast return on investment (Product photo for illustration purposes) The machine is CE certified.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 08-20101,

Stanje: novo, Leto izdelave: 2025,

Leto izdelave: 2021, Stanje: dober (rabljeno), Hard cheese slicer, hard cheese cutting machine, Parmesan slicer, Parmesan cutting machine - Hard cheese is cut using a wire - Suitable for whole wheels and further portioning Hsdpjhr St Ujfx Af Tjfb - Frame made of stainless steel - Operating voltage: 380 V - Dimensions: 1010/880/H1600 mm - Weight: 162 kg

Stanje: novo, Leto izdelave: 2025,

Stanje: dober (rabljeno), Wood milling cutter, milling head, milling tool, wood router, profile cutter - Outer diameter: 160 mm - Height: 45 mm - Radius - Bore: Ø mm - Weight: 5.6 kg Hfjdociv Tcepfx Af Tsb

Stanje: novo, Leto izdelave: 2025, The CORMAK H-350SA column-type band saw is a high-performance machine designed for automatic cycle cutting of solid materials and profiles. Its robust body and heavy-duty saw frame, combined with a column-based structure, provide excellent rigidity and a superior level of stability during the cutting process, even with the most challenging metals to process. The saw is equipped with a PLC controller and an intuitive touchscreen interface for ease of use. A notable advantage of this model is the swiveling saw head, which allows cutting from 0° to 60°—both in automatic and semi-automatic cycles—with smooth angle adjustment. Manual and Automatic Modes: The saw allows for both manual operation from the machine control panel and fully automatic cutting cycles, eliminating the need for constant operator supervision. Top Vice Pressure: The saw is configured for bundle cutting. Hodpfx Afowdunwe Tofb Automatic Cutting Cycle: In automatic mode, the entire cutting process—including clamping the workpiece, feeding it to the preset length, lowering the saw arm, and raising it after the cut—is carried out without operator intervention. Control Panel Parameters: Cutting parameters such as batch quantity, workpiece dimensions, band speed, and more, are set and controlled via the operator-friendly touchscreen control panel. Robust Construction: The machine body is made from cast iron mounted on a rigid, box-type frame, providing outstanding rigidity and stability. Saw Band Drive: Features a powerful three-speed motor, hydraulic band tensioning, a cooling system, and a cleaning brush, ensuring precise and efficient cutting. Safety System: In case of band breakage, the machine stops automatically to ensure operator safety. Hydraulic Material Feed System: This enables fully automatic operation, with accurate feeding length adjustments. Innovation and ISO Standards: Cormak offers innovative solutions and manufactures to ISO:90001 and ISO:140001 standards, demonstrating a high level of quality, safety, and product reliability. Technical specifications: Cutting capacity: Ø350 or 350 x 350 mm Blade: 4515 x 34 x 1.1 mm Cutting speeds: 27/45/69 m/min Total power: 4.8 kW Hydraulic unit: 0.75 kW Coolant pump: 0.04 kW Blade tensioning: hydraulic Feeder stroke: 500 mm Load capacity: 1500 kg Table height: 700 mm Dimensions: 2800 x 2200 x 1700 mm Weight: 1500 kg

Stanje: novo, Leto izdelave: 2025, Semi-automatic hydraulic column band saw. A versatile machine for series production, suitable for cutting both solid materials and profiles. The device is equipped as standard with an automatic blade tension control module, which ensures precise and straight cutting at a given cutting depth. Exceptionally large cutting capacities: 500x700 mm. Machine Description Hfjdpfjizi T Ejx Af Tob The CORMAK H-50/70 double-column band saw is a high-performance machine for semi-automatic cutting cycles, suitable for solids and profiles made of steel, cast iron, and non-ferrous metals. The double-column design provides increased rigidity during the cutting process. The use of an entirely different arm and blade guidance technology compared to scissor-type machines significantly reduces cutting time and increases cutting accuracy. In the semi-automatic CORMAK H-50/70 band saw, once the cycle is started, the complete cutting sequence—including clamping the material in a hydraulic vise, blade feed start, arm descent (with stepless speed adjustment), machine stop after cutting, arm raise (with adjustable raise height), and hydraulic vise release—is performed automatically. Manual operation is reduced to positioning the workpiece against the stop. The robust arm, made from a single cast iron piece, combined with a solid and stable construction, provides the CORMAK H-50/70 band saw with exceptional rigidity, translating to reliable operation and high cutting precision. The blade tensioning system ensures optimal working conditions for the saw blade. In case the blade breaks, the machine stops automatically. Blade guidance precision is assured by guides consisting of bearings and hard metal (carbide) inserts. The innovative design and manufacturing of CORMAK semi-automatic and automatic band saws in accordance with ISO 90001 and ISO 14001 standards ensure safety, quality, and product reliability. The use of motors under license from ABB, a world-renowned and respected manufacturer, guarantees long and trouble-free operation. Technical Specifications TYPE: semi-automatic ARM LIFTING/DESCENDING: hydraulic with stepless descent adjustment BLADE SPEED: 40/60/80 m/min VISE: hydraulic TABLE HEIGHT: 600 mm BLADE DIMENSIONS: 41x1.3x6100 mm MAIN MOTOR POWER: 5 kW TOTAL POWER: 6.5 kW DIMENSIONS (LxWxH): 3050x1150x1950 mm WEIGHT: 2400 kg Max. Cutting Range [mm] Angle: 0º ø500, 500 × 700 Standard Equipment: - Front-mounted control panel - Semi-automatic operation mode - Built-in hydraulic unit - Arm position memory function - Saw blade cleaning brush - Cooling system - Bimetal band saw blade - CE declaration of conformity - Technical and operation documentation

Stanje: novo, Leto izdelave: 2025,

Stanje: novo, Leto izdelave: 2025, The CORMAK H - 260 SA automatic column band saw is a highly efficient machine designed for automatic-cycle cutting of bars, tubes, and profiles made from steel, cast iron, and non-ferrous metals. Its robust body and sturdy saw frame, combined with a column-type construction, ensure excellent rigidity and an exceptional level of stability during cutting, even when processing the most challenging metals. The saw is equipped with a PLC controller and a user-friendly touchscreen interface. The saw offers the option to cut in both manual and automatic modes. Manual mode allows all operations to be performed directly from the machine panel. Automatic mode – once the machine is started, the entire cutting cycle, including clamping the workpiece in the vise, feeding it to the set dimension to the cutting blade, lowering the arm for cutting, and lifting the arm to the desired height after the cut, is performed fully automatically without operator intervention. Cutting parameters, such as the number of pieces to be cut, their dimensions, blade speed, and arm feed rate, are set via the control panel. The machine will stop automatically if the series is completed, the blade breaks, or the control system detects another malfunction. The machine’s body is a cast iron base mounted on a rigid, spatial frame chassis. Inside the enclosure, you’ll find the hydraulic unit, coolant reservoir with pump, and a chip conveyor. The blade drive is powered by an inverter-controlled motor, delivering smooth speed adjustment across a wide range. Hydraulic blade tensioning ensures optimal working conditions for the band. If the blade breaks, the machine stops automatically. A cooling system and cleaning brush ensure maximum cutting performance and extend blade life. Hsdpfx Aeiz S I Hsf Tefb The hydraulic material feed system delivers a fully automatic work cycle. The control unit, equipped with an LCD display, allows programming of saw operations, signals end-of-material, communicates errors, and shows the number of parts cut after the programmed batch. The maximum material feed per stroke is 500 mm, with a feed accuracy of +/- 0.2 mm per stroke. The innovative design and manufacturing of CORMAK semi-automatic and automatic saws according to ISO:90001 and ISO:140001 standards guarantee safety, quality, and reliability. Motors are licensed from ABB, a globally recognized industry leader, ensuring long-lasting, maintenance-free operation. Technical Specifications - Cutting range: Ø260 mm or 260 x 260 mm - Blade size: 3150 x 27 x 0.9 mm - Cutting speeds: 40/60/80 m/min - Main motor: 2.2 kW - Hydraulic unit: 0.75 kW - Coolant pump: 0.09 kW - Feeder stroke: 500 mm - Load capacity: 1500 kg - Machine dimensions: 1600 x 1800 x 1550 mm - Weight: 1000 kg Maximum cutting range at 0º: ø260 mm / 260 × 260 mm Standard Equipment - Automatic working cycle - Arm position memory function - Integrated hydraulic unit - Vise position memory function - Adjustable cutting speed - Driven blade cleaning brush - Cooling system - Bi-metal band saw blade - CE declaration of conformity - Full technical documentation (in Polish and English) For more information, please visit our website.

Stanje: novo, Leto izdelave: 2025, Semi-Automatic Bandsaw CORMAK S-440R. The saw arm is made from a single-piece cast iron body, and with the application of a 34 mm cutting blade, it enables precise cutting of both profiles and solid materials. The bandsaw is equipped with a vise and hydraulic arm lowering and lifting. Machine characteristics: In semi-automatic band saws, once the switch is activated, the entire cutting cycle—clamping the workpiece in the hydraulic vise, activating the blade feed, lowering the cutting arm (speed adjustable), machine stop after the cut, raising the arm (lifting height adjustable), and releasing the hydraulic vise—takes place automatically. The arm, made from a single cast iron piece and equipped with a 34 mm blade, allows efficient cutting of both profiles and solid materials. Technical Data S-440R: MINIMUM CUTTING DIAMETER: ø5 mm MINIMUM MATERIAL LENGTH IN VISE: 30 mm DISTANCE FROM BASE OF VISE TO FLOOR: 780 mm BLADE DIMENSIONS: 5200 × 34 × 1.1 mm TOTAL POWER: 4.4 kW BLADE SPEED: 20/90 m·min⁻¹ DIMENSIONS (L x W x H): 2500 × 1900 × 1450 mm WEIGHT: 1100 kg Hsdpsi Dx R Nofx Af Tjfb Max. Cutting Capacity [mm] S-440R Angle Round Rectangle Square Max Square 0° ø450 620×440 610×440 450×450 45° R ø440 500×190 360×440 420×420 45° L ø440 510×180 460×390 390×390 60° R ø330 330×170 170×440 300×300 60° L ø350 350×170 330×310 310×310 Standard Equipment: - PLC controller - Semi-automatic operation - Control console on separate pedestal - Control panel with LCD display - Built-in hydraulic unit - Hydraulic arm movement control (up/down) with stepless lowering speed adjustment - Arm position memory function (arm returns to preset height after cut) - Hydraulically controlled vise jaws (long-stroke cylinder with position memory) - Angle cutting left/right 60°- 45° - 0° - 45° - 60° - Digital display of set cutting angle - Adjustable blade speed with frequency inverter - Powered blade cleaning brush - Cooling system - Bimetal bandsaw blade - CE Declaration of Conformity - Technical documentation For further information, please visit our website.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, CORMAK C33 is a high-quality automatic column band saw designed for cutting material with a cross-section of 300x400 mm. The robust frame and solid saw structure, combined with the column design, ensure exceptional rigidity and stability during cutting, even with the most demanding metals. The saw is equipped with a PLC controller and a user-friendly touchscreen interface. CORMAK C33 Band Saw - Technical Specifications TYPE: automatic column-type ARM LIFTING AND LOWERING: hydraulic with stepless adjustment BLADE SPEED: 20–100 m/min (variable speed) FIXED AND FEEDING VISE: hydraulic MINIMUM CUTTING DIAMETER: Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE: 30 mm VISE BASE HEIGHT: 780 mm SAW BLADE: 34 x 1.1 x 3950 mm TOTAL POWER: 6 kW HYDRAULIC UNIT POWER: 1.5 kW COOLANT PUMP POWER: 0.75 kW DIMENSIONS (LxWxH): 2300 x 2400 x 1650 mm WEIGHT: 1900 kg CORMAK C33 Band Saw - Cutting Parameters Cutting angle Square Rectangle 0º ø300 300 × 400 mm Hfedpfx Afsrh Epke Tob CORMAK C33 Band Saw - Standard Equipment • Automatic cycle operation • Touchscreen control panel with LCD display • Programming of quantity and length of cut pieces • Memory for up to 5 different cutting programs • Electronic blade speed readout • Arm position memory function • Built-in hydraulic unit • Vise position memory function • Variable cutting speed (inverter-driven motor) • Powered blade cleaning brush • Cooling system • Bi-metal band saw blade • CE Declaration of Conformity • Operating and maintenance manual in Polish and English For more information, please visit our website.

Stanje: novo, Leto izdelave: 2025, CORMAK HR500SA is an advanced automatic band saw designed for cutting solid materials, pipes, and large-section steel profiles. Thanks to its dual-column design and reinforced frame, the machine delivers maximum stability, precision, and repeatability of cutting—even during continuous operation. Technical specifications: Automatic band saw HR500SA Cutting range: Ø500 mm or 650 x 500 mm Blade dimensions: 6600 x 41 x 1.3 mm Blade speeds: 27 / 45 / 69 m/min Total power: 6.5 kW Blade tensioning: manual Feeder stroke: 500 mm Table height: 715 mm Load capacity: 3000 kg Dimensions (L x W x H): 3200 x 3050 x 2115 mm Weight: 3200 kg Standard equipment: Touchscreen control panel with memory settings Automatic work cycle Top bundle clamp Hydraulic material feed system Three-speed cutting gearbox Cooling system and cleaning brush Bi-metal cutting blade CE declaration of conformity, DTR manual Hfedpfx Afoi Ab Dlj Teb