Rezalnik Cevi nakup rabljenega (8.141)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Babenhausen
617 km
Rezalnik kruha
SchickartBS 26
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, Certificirano po DGUV do: 12/2026, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, Serija BS – Stroj za rezanje perecov in žemljic
Schickart model: BS 26
Namizni stroj
za vzdolžno ali prerečno rezanje
Izvedba iz nerjavečega jekla
Samo pri nas preizkušeno po DGUV V3
Priključek 220 V
Rabljeni stroj, očiščen
Godpfeqy A Tisx Afqett
Na zalogi še več vrhunskih rezalnih strojev!
Mali oglas
Babberich
908 km
Končna obdelava cevi na morju
AXAHFB Z600
Klic
Stanje: dober (rabljeno), Manufacturer: AXA
Model: HFB 600
CNC Control: Siemens 840D Solution Line
Year of Manufacture: 2015
Gtsdpfxjt Tdp Te Afqot
Specifications:
Metric / US Standard
There are currently no specifications available for this machine.
Dimensions (Approximate):
Length: 7800 mm
Width: 2300 mm
Height: 2250 mm
Weight: 15000 kg
Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms will be implied. We recommend verifying all critical details independently.
Finishing of sealing surfaces:
The finishing of the sealing surfaces on the approximately 17m long tubes is performed by an NC-controlled feed unit and an NC-controlled facing slide equipped with 2 ABS tool holders, allowing the use of turning tools, measuring probes, or sensors. The workpiece is initially gauged using measuring sensors mounted in the facing slide heads and is aligned via the adjustable roller supports. Once positioned at a right angle and centered with respect to the facing slide head, the tube is clamped hydraulically by the floating chuck jaw. The interchangeable measuring sensors determine the optimal machining parameters for processing the surface.
Mali oglas
Limburg an der Lahn
698 km
Stroj za upogibanje cevi
Jutec Biegesysteme GmbH & Co. KGBiegesystem 5000
Klic
Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII:
The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production.
The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated.
The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed.
This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle.
The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine.
POSSIBLE APPLICATIONS:
• Hydraulic piping
• Pipeline construction
• Plant engineering (e.g. chemical industry)
• Metalworking
• Prototype construction
Technical data:
• Bending capacity: Ø 6 to 50 × 4 mm, depending on material
• Bending radius min/max: 10 mm / 140 mm
• Minimum bending radius: 1.5 × Ø (Standard 2 × Ø)
• Multi-function machine control with bending angle adjustment (0.1°)
• Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths)
Gtsdpfendn Agjx Afqjt
• Maximum 180º bending result
• Weight: 600–700 kg (depending on version)
• Ergonomic operation via safety foot switch
OPTIONAL ACCESSORIES:
• Automatic mandrel lubrication (minimum quantity)
• Pneumatic or hydraulic quick-change chuck
• Length and rotation positioning via automatic brake system or manual stops via foot switch
• Semi-automatic length and rotation positioning via servo motors
• Pneumatic rotary stop
• Pipe calculation software
• Laser-based tool monitoring for clamping force control
• 10-inch touchscreen with integrated pipe calculation
• Bending radius up to 250 mm
• Data transfer via cable (LAN), wireless (WLAN), or USB
OUR SERVICES:
• Test production in our in-house demo room
• On-site consultation at your premises
• Consultation and processing as lease/financing purchase via JUTEC
• Trade-in of your current machine
• Service contracts, on-site maintenance

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Luckenwalde
674 km
Avtomatski rezalnik / avtomatska naprava za vzdolžno rezanje profilov
PPS DIETLEPPS-ASA-02
Klic
Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Avtomatska žaga PPS DIETLE PPS-ASA-02 (letnik 2000)
Gtedpfsx Srudox Afqot
Rabljena avtomatska žaga za odrezovanje / linija za odrezovanje profilov PPS DIETLE, tip PPS-ASA-02, letnik 2000. Naprava je primerna za avtomatsko odrezovanje palic in profilnih materialov v serijski proizvodnji.
Obseg dobave: stroj kot prikazano. Ogled pod napetostjo možen po dogovoru.
Mali oglas
Detmold
784 km
Rezalnik furnirja
JOSTINGEFS 2800 L
Klic
Stanje: zelo dobro (rabljeno), Stroj za razrez furnirskih paketov JOSTING, tip: EFS 2800 L
s prečno furnirsko škarjo KUPER, tip: ZV800 E
Št. stroja: 10386
Dolžina reza: 2800 mm
Višina vstavljanja: 80 mm
Območje paralelnega prislona: 20 - 570 mm
Tlačna prečka: hidravlični valj; 2 tlačni stopnji
Nožna prečka: zavorni motor, menjalnik, ročični mehanizem
Paralelni prislon: trifazni motor, pogon za pozicioniranje
Električni priključek: 7,7 kW
Tloris (s paralelnim prislonom): 414 x 155 cm
Višina: 170 cm
Teža: 3500 kg
Prečna furnirska škarja
Gtjdsx Tfvdopfx Afqet
KUPER, tip: ZV800 E Za krajšanje furnirskih paketov
Št. stroja:
Širina reza: 850 mm
Višina vstavljanja: 60 mm
Maks. debelina lista: 3 mm
Moč motorja: 3,5 kW
Tloris x višina (brez odlagalne mize): 112 x 60 x 140 cm
Teža: 480 kg
Odkrijte več rabljenih strojev
Mali oglas
Wasbek
953 km
Stroj za obdelavo koncev cevi - RGM 3
KnuthRGM 3
Klic
Stanje: rabljeno, RGM 3 je univerzálny stroj na opracovanie koncov rúr, ktorý zaujme robustným vyhotovením a malými rozmermi, a preto je ideálny na opracovanie rúr a profilov. Vďaka praktickému rýchloupínaciemu skľučovadlu vpredu a upínaciemu skľučovadlu vzadu umožňuje jednoduchú manipuláciu a rýchle prispôsobenie rôznym priemerom rúr. Stroj je vybavený aj rezačkou rúr a vnútorným odhrotovačom rúr, čím zaisťuje efektívne a presné opracovanie. Okrem toho je RGM 3 vybavený pojazdným podvozkom, ktorý zvyšuje jeho mobilitu. Tento výkonný a robustný stroj od spoločnosti KNUTH je ideálnou voľbou, ak hľadáte efektívne riešenie pre vaše potreby v oblasti spracovania rúr. Stroj RGM 3 si teraz môžete vyžiadať priamo pre vaše použitie, prípadne objednať online a úspešne realizovať vaše projekty opracovania koncov rúr.
Gtedpfx Afsuxc Rhsqot
Mali oglas
Babenhausen
617 km
Rezalnik kruha
LebemaOrion small
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, največja širina rezanja: 25 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 690 mm, skupna širina: 600 mm, skupna višina: 1.050 mm, nazivna moč: 1 kW (1,36 KM), vhodna frekvenca: 50 Hz, potrebna višina: 1.050 mm, zahteva za prostor dolžina: 690 mm, potrebna širina: 600 mm, Lebema Orion mali
Stroj z okroglim rezilom
Izvedba iz nerjavečega jekla,
nož na novo nabrušen in prevlečen
ročno upravljanje z vrtljivim regulatorjem
debelina rezine nastavljiva od 4 do 25 mm
samo pri nas DGUV V3 preizkušeno
Godpjiitqlefx Afqott
stroj na kolesih z zavoro
priključek 400V, vtič CEE 16A
Rabljena stroj, očiščen in SAB preverjen
Možnost:
Vzdrževalna pogodba
Servisni paket
Škatla za rezervne dele
Dostava
Obiščite naš velik park pekarskih strojev!
Mali oglas
Lübbecke
828 km
Stroj za rezanje cevi
DNE Laser - Member of Bystronic groupD-Tube
Klic
Stanje: novo, Leto izdelave: 2025, DNE tube and profile laser cutting machines (among the best systems on the market) are distinguished by their outstanding price-performance ratio. These machines are robust, fast, and dynamic in operation. You can choose between a semi-automatic or a fully automatic tube loader. Optional machine configurations are available for tube diameters of up to 240 mm, 350 mm, 520 mm, and 640 mm. Laser power ranges from 3 to 12 kW, with processing lengths up to 12 meters. A 45-degree laser cutting head is also available. We are happy to provide you with an offer and are confident you will be satisfied. Our dedicated German service team supports you from installation of your laser cutting system through to training.
Gtsdpfxoq U A U Us Afqet
Mali oglas
Limburg an der Lahn
698 km
Stroj za upogibanje cevi
Jutec Biegesysteme GmbH & Co. KGDornbiegemaschine Biegesystem 5000S
Klic
Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII:
The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production.
The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available.
The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending.
This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle.
The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine.
POSSIBLE APPLICATION AREAS:
• Hydraulic piping installation
• Pipeline construction
• Plant engineering, e.g. chemicals
• Metal construction
• Prototype manufacturing
Technical Data:
• Bending capacity Ø 6 to 50 x 4 mm depending on material
• Bend radius min/max: 10 mm/140 mm
• Minimum bend radii: 1.5 x Ø (standard 2 x Ø)
• Multi-functional machine controller, bending angle setting (0.1°)
Gjdpfx Afong Exaeqstt
• Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request)
• Maximum 180º bend result
• Weight: 800-900 kg (depending on configuration)
• Ergonomic operation via safety foot switch
OPTIONAL ACCESSORIES:
• Automatic mandrel lubrication (minimal quantity)
• Pneumatic or hydraulic quick-action chuck
• Length and rotation positioning via automatic brake function or manual stops with foot switch
• Automatic length and rotation positioning via servo motors
• Pneumatic rotation stop
• Tube calculation software
• Laser-based tool monitoring for monitoring clamping pressure
• 10-inch touch screen with integrated tube calculation
• Bending radius up to 250 mm
• Data transfer via cable (LAN), wireless (WLAN), or USB
OUR ON-SITE SERVICE:
• Test production welcome at our in-house demo room
• Consultation and information session on your premises
• Leasing/financing support and processing through JUTEC
• Trade-in of your existing machine
• Service contracts, maintenance on site
Mali oglas
Cantù
455 km
Rezalnik furnirja
MONGUZZITRC - MP 4200
Klic
Stanje: dober (rabljeno), Koda: 0263
Znamka: MONGUZZI
Model: TRC - MP 4200 - CE standard
Gtsdpfx Ajx Hfr Ssfqet
Avtomatska hidravlična giljotina za furnir z enim rezilom – CE standard
Tehnični podatki:
Močna osnovna konstrukcija
Velik težak pritisni element za idealno vpenjanje vseh vrst furnirja
Visokokakovostno jekleno rezilo z visoko odpornostjo proti obrabi
Možnost delovanja v avtomatskem in ročnem načinu
Hidravlična krmilna enota
Druga nadzorna plošča za končno rezanje
Avtomatski zadnji prislon z elektronskim programatorjem 1500 mm
Dolžina reza 4300 mm
Maksimalna globina prislona 1500 mm
Minimalna globina prislona 25 mm
Uporabna odprtina pritisnega elementa 80 mm
Širina pritisnega elementa 360 mm
Čas rezanja 4 sekunde
Varnostne fotocelice
Moč 10 kW
Višina delovne površine 910 mm
Skupne mere: stroj 5700 x 1300 x 1800 mm (višina) – Zadnji prislon 3500 x 2000 x 300 mm (višina)
Teža 6500 kg
Mali oglas
Radom
736 km
Avtomatski rezalnik vogalov
Kolbus ECK 100Automatic Corner Cutter
Klic
Stanje: dober (rabljeno), Kolbus ECK 100 Avtomatski rezalnik vogalov
Izdelano v Nemčiji, Kolbus GmbH & Co. KG.
Zelo dobro ohranjeno. Profesionalna, proizvodna naprava za obrezovanje vogalov pri trdih vezavah.
Robustna konstrukcija zagotavlja natančno delovanje.
Zamenljiva rezila.
Godpfx Afex N I H Dsqjtt
Nastavljive meje.
Priložen je en komplet rezil.
Poganjan s stisnjenim zrakom.
Mali oglas
Bischofszell
463 km
VZVODNI REZALNIK
IDEAL1080
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, številka stroja/vozila: 1504369, Cutting length: 800 mm
Format: DIN A3
Cutting capacity: 20 sheets (paper weight 70g/m²)
Table size: 605 x 800 mm (W x D)
Gtsdpfx Aevnmkysfqet
Professional lever-operated guillotine IDEAL 1080 with safety automatic.
The IDEAL 1080, with a cutting length of 800 mm, allows for cuts up to DIN A3 size and DIN A2 in landscape orientation. The maximum cutting capacity is approximately 20 sheets of 70 gsm paper. The continuously adjustable back gauge can be locked in position. The paper stacks are securely fixed in place before cutting by means of a foot-operated clamp, enabling precise cuts. In addition, a transparent, fixed blade guard made from shatterproof plastic ensures optimal safety. The durable blades are manufactured from high-quality Solingen steel and can be re-sharpened if necessary.
GS certified!
Mali oglas
Babenhausen
617 km
Rezalnik kruha
RegoShop
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 09/2026, največja širina rezanja: 16 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 700 mm, skupna širina: 1.000 mm, skupna višina: 1.050 mm, nazivna moč: 1,6 kW (2,18 KM), vhodna frekvenca: 50 Hz, potrebna višina: 1.050 mm, zahteva za prostor dolžina: 700 mm, potrebna širina: 1.000 mm, Rego Herlitzius Shop
Stroj s srpastim nožem
Izvedba iz nerjavečega jekla, premičen
Ročno upravljanje preko vrtljivega regulatorja
Širina reza 3 - 16 mm
Priključek 400V, vtič 16A-CEE
Mere: 1000 x 700 x 1050 mm, ŠxGxV
Rabljeni stroj, preverjen pri SAB
Še veliko drugih rezalnikov kruha na zalogi!
Gtodpsvktlvefx Afqot
Mali oglas
Komarów-Osada
800 km
Skledo rezalnik
Metalbud NowickiKN-200
Klic
Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Krajarka Metalbud Nowicki KN-200 doskonale nadaje się do produkcji wszelkiego rodzaju farszu mięsnego. Idealna dla średniej wielkości zakładów. Urządzenie może być również wykorzystywane w przemyśle cukierniczym, warzywnym lub rybnym.
Główne zalety:
- konstrukcja ze stali nierdzewnej
- rozdrabnianie farszu w całej misie
- wysoka wydajność
- niezawodność
- regulacja prędkości cięcia
- pomiar temperatury produktu
- system smarowania
- łatwy załadunek i rozładunek
- możliwość mieszania i rozdrabniania farszu
- programowanie ponad 40 programów technologicznych
- załadunek hydrauliczny
Specyfikacja:
Typ: KN-200
Pojemność misy: 200 l
Prędkość cięcia (obr./min): 200÷4800
Prędkość mieszania (obr./min): (-100)÷(-300)
Wymiary:
Gtedpfx Ajir U Nvefqst
Długość: 2820 mm x Szerokość: 2550 mm x Wysokość: 2080 mm
Waga: 3600 kg
Mali oglas
Zaleszany
714 km
Plazemski rezalnik
Polska Grupa CNCPC2060
Klic
Stanje: novo, Leto izdelave: 2026, This is a modern CNC plasma cutting machine designed for industrial applications, used for cutting sheet metal and profiles by means of a plasma torch. It features a robust construction made from the highest quality steel and aluminum, a large cutting capacity, the ability to cut elements of virtually any shape, and low process costs.
Material cutting is performed in a short time while maintaining high precision of detail reproduction. To obtain the desired shape, simply import a file into the software, making the operation of the cutter easy and intuitive.
Our plasma cutting machines are primarily intended for processing the following materials:
Gtodeur R Erspfx Afqst
- Mild steel,
- Stainless steel.
CONSTRUCTION
The plasma cutter frame has been designed and manufactured from scratch in our factory. The high-quality steel used for machine production is cut, welded, and then subjected to precision machining. The entire frame, gantry, and gantry arms have additional reinforcements, providing high rigidity and eliminating vibrations and deformations.
DRIVES
Our cutting machines are equipped with high-power, high-resolution AC servo motors, which provide appropriate acceleration and speed in all directions. These highly dynamic and precise motors with feedback ensure zero backlash through constant monitoring of operating parameters. Classic, proven helical racks are used on the X and Y axes, delivering superior durability and precision.
TORCH
We use components from the leading manufacturer PGCNC in our plasma systems. The torch technologies significantly enhance productivity and cutting speed. HD technology ensures better hole quality, increased piercing performance, and beveling capabilities. This guarantees high-quality, consistent cuts and maximized productivity with minimal operating costs and maximum reliability.
SLAT TABLE
The slat table is built using technology resistant to high-temperature operation. This allows for continuous operation without the risk of burn-through that could prevent even placement of the material on the working table. The layout of the slats can be easily adjusted depending on the size of the parts to be cut. The slat table is an excellent solution for cutting thicker materials.
SOFTWARE
The machine comes with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import ready-made designs in vector formats: .dxf, .plt, .ai, .eps. The software enables fast and precise development of cutting paths.
POWER SOURCE
The standard equipment of the machine includes a 120A power source, which offers high performance as well as high quality and cutting speed.
AUTOMATIC LUBRICATION SYSTEM
The plasma cutter is also equipped with an automatic lubrication system, which minimizes machine maintenance requirements. The central lubrication system is a simple and functional device used to deliver oil to contact points of machine components.
Mali oglas
Bitburg
758 km
Kombinirani brusilnik cevi, profilov in trakov
MetallkraftKRBS 101
Klic
Stanje: novo, Leto izdelave: 2026, KRBS 101 Combined Tube, Profile, and Belt Grinding Machine
Convenient operation due to easily adjustable clamping device
The rotating jaws of the clamping device ensure secure fixation of square tubes, round tubes, and flat steel
Adjustable grinding angles from 30° - 90° and from 0° - 60°
Optimized quick-change holder allows for fast, tool-free replacement of the contact wheel
Exceptionally durable due to larger, improved roller bearings
Practical contact wheel holders are integrated into the machine base
Extensive selection of contact wheels for grinding various tube diameters available as accessories
Quick switch between tube grinding and belt grinding possible
Powerful motor
Almost all adjustments can be made without tools (operating tool included)
Large, foldable protective screen with optimal visibility
Two belt speeds allow for optimal adaptation to the respective material (15 m/s ideal for stainless steel and aluminium, 30 m/s perfect for steel)
Includes two easily removable chip collection containers
Extraction port (Ø 100 mm) for dust extraction systems available
Extraction systems available as accessories
Advanced, vibration-reducing machine base
Scope of delivery:
1 x Standard sanding belt grit K 36
2 x Chip collection containers
1 x Wrench
1 x Contact wheel 42 mm
Model: KRBS 101
Item No.: 3921001
Technical Data
Power supply: 400 V
Mains frequency: 50 Hz
Motor power: 2.5 / 3.3 kW
Grinding diameter: 20 - 76 mm
Grinding angle: 30 - 90° (0° - 60°)
Abrasive belt (length x width): 2000 x 100 mm
Belt speed: 15/30 m/s
Extraction port diameter: 2 x 100 mm
Dimensions (L x W x H): 1250 x 750 x 1140 mm
Weight: 159 kg
Location: Ex works - available at short notice
Gtsdpfx Afjcnz Aysqst
Mali oglas
Babenhausen
617 km
Rezalnik kruha
WabämaR 400
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, največja širina rezanja: 25 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 720 mm, skupna širina: 800 mm, skupna višina: 1.110 mm, nazivna moč: 1,1 kW (1,50 KM), vhodna frekvenca: 50 Hz, potrebna višina: 1.110 mm, zahteva za prostor dolžina: 720 mm, potrebna širina: 800 mm, Krožnorezilni stroj za rezanje kruha
Wabäma model: R 400
Vsestranski med rezalniki kruha
maks. število rezin: 140 kos/min
maks. dimenzije kruha: 420 x 320 x 140 mm (ŠxDxV)
Stroj s krožnim rezilom in možnostjo prepolovitve kruha
z integriranim predalom
Krožno rezilo s posebno visokokakovostno teflonsko prevleko
Stroj je premičen z blokado
Debelina reza nastavljiva od 4 do 25 mm
Gtsdpfx Afsvkth Roqot
Samo pri nas pregledan po DGUV V3
Priklop 400V, 16A-CEE vtič
Dimenzije: 800 x 720 x 1110 mm (ŠxDxV)
Rabljeni stroj, očiščen, pregledan SAB
+ Servis rezervnih delov
Možnost:
Vzdrževalna pogodba
Rezervno rezilo
Servisni paket
Dostava
Uvedba in zagon
V naši zalogi vas čaka več kot 50 strojev za rezanje kruha!
Mali oglas
Zaleszany
714 km
Laserski rezalnik
Polska Grupa CNCFC1530 z bocznym załadunkiem
Klic
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FIBER CUT laser cutting machines represent a revolutionary solution! Innovative fiber laser technology enables significantly faster, more efficient, and cost-effective sheet metal cutting compared to CO2 lasers. These machines are distinguished by their high speeds, performance, and exceptional cutting accuracy, ensuring unmatched precision and repeatability.
Our fiber lasers are primarily intended for processing the following materials:
- Non-ferrous metals
- Aluminum
- Stainless steel
- Carbon steel
CONSTRUCTION
The frame of our laser is designed and manufactured from the ground up in our factory. High-quality steel is used in the machine’s production—cut, then welded, and subjected to precision machining. The entire frame, gantry, and gantry arms feature additional ribbing, delivering high rigidity and eliminating vibrations and deformations.
LASER SOURCE
The system is equipped with a Raycus Laser light source, offering high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This ensures faster and more effective operation while helping minimize operator errors. Additionally, the source is resistant to back reflections, preventing beam return to the laser. Stable power output guarantees efficient performance with minimal energy usage.
AUTOMATIC LUBRICATION SYSTEM
To keep the machine in optimal condition, racks and guides must be lubricated with oil at least every few days. The automatic lubrication system applies oil at designated intervals and in precise amounts, with all parameters set via software.
- Working area: 1500 x 3000 mm
- Cutting head: NC30E
- Control system: CYPCUT 2000E
- Japanese linear rail: SMG
- Drive system: LEADRACK
- Servo motors: LEADSHINE BUS XY 750W
- Reducer: Shimpo
- Laser source: Raycus 3KW (CE)
Gjdpfjuruyajx Afqjtt
- Exhaust fan, supplied as standard with the computer
Mali oglas
Bitburg
758 km
Kombinirana žaga in rezalnik
Holzkraft / SCMST 3 Classic 23 - sofort verfügbar -
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulder
Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table
Robust steel and cast iron construction
Large support surface and precise cast iron table
High-precision sliding table made of anodized aluminium (travel distance 2250 mm)
Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence
Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45°
Saw rip fence with fine adjustment
Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life
Solid and precise machine table made of stress-free cast iron
3 manually adjustable spindle speeds from 3,500 – 10,000 rpm
Spindle moulder with forward/reverse rotation
Standard arc-shaped spindle guard
Two 5.0 kW motors with high performance reserves
Cast Iron Spindle Moulder Unit
secured at the top on both sides
precision ball bearings at the top
close to the pivot point
four optimally graduated spindle speeds allow for sharpening of workpieces
Powerful Motors
Industrial motor, 100% duty cycle for continuous operation at full load
Scope of Delivery:
Arc-shaped spindle guard
Anodized aluminium sliding table
Aluminium fence jaws
Folding stops
Gedecnwydopfx Afqett
Technical Data
Cast iron table dimensions: 1112 x 430 mm
Edging length: 2250 mm
Max. saw blade diameter with/without scorer: 315 mm
Max. cutting height at 90°/45°: 100/70 mm
Max. crosscut length: 2660 mm
Saw blade tilt: 90° - 45°
Cutting width: 900 mm
Speed: 4000 rpm
Table router: -
Spindle tilt: 90° - 45°
Useable spindle length: 100 mm
Max. tool diameter: 210 mm
Max. tenoning tool diameter: 275 mm
Max. tool diameter, retractable: 180 mm
Speeds: 3,500/7,000/10,000 rpm
General: -
Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP)
Weight: 470 kg
Extraction ports diameter: 2 x 120 mm
Saw blade guard extraction port diameter: 60 mm
Location: From stock, 54634 Bitburg
- Immediately available -
Mali oglas
Babenhausen
617 km
Rezalnik kruha
RegoRoto Shop DL
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 11/2026, največja širina rezanja: 16 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 700 mm, skupna širina: 1.000 mm, skupna višina: 1.050 mm, vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2022, potrebna višina: 1.050 mm, zahteva za prostor dolžina: 700 mm, potrebna širina: 1.000 mm, Rego Roto Shop DL
Stroj s krožnimi rezili
Rezila na novo nabrušena in prevlečena
Ročno upravljanje preko vrtljivega gumba
Širina reza: 3 – 16 mm
Priključek: 400V, 16A-CEE vtikač
Predal za kruh: 40 x 23 cm
Mere: 1000 x 700 x 1050 mm (SxGxV)
Rabljena naprava, očiščena, preverjena s strani SAB
Možnosti:
Godperhv E Nefx Afqett
Vzdrževalna pogodba
Dostavna storitev
Usposabljanje in zagon
Najboljši rezalniki kruha na zalogi!
Mali oglas
Zaleszany
714 km
Plazemski rezalnik PC1530 120A HD
Polska Grupa CNCPC1530
Klic
Leto izdelave: 2026, Stanje: novo, This is a modern CNC machine tool designed for industrial applications, used for cutting sheet metal and profiles with the use of a plasma torch. It features, among other things, a robust construction made from top-quality steel and aluminum, a large cutting range, the ability to cut components of any shape, and low operational costs. The high-end solutions applied in manufacturing ensure reliable and safe operation. Material cutting is performed quickly while maintaining precise reproduction of details. To achieve the desired shape, it is only necessary to import a file into the software, making operation of this cutting machine easy and intuitive.
Our plasma cutters are primarily intended for processing the following materials:
- Mild steel
- Stainless steel
CONSTRUCTION
The plasma cutter frame has been designed and produced from scratch at our factory. The high-quality steel used to manufacture the machines is cut, then welded, and subjected to precise machining. The entire frame, gantry, and gantry arms are equipped with additional reinforcements that ensure high rigidity and eliminate vibrations and deformations.
DRIVES
Our cutters are powered by high-resolution, high-power AC Servo motors, which provide proper acceleration and speed in all directions. These are highly dynamic and precise motors with feedback control, guaranteeing no positioning error thanks to constant monitoring of operating parameters. The X and Y axes use classic and proven helical racks, which offer exceptional durability and precision.
TORCH
Our plasma machines are fitted with components from the leading manufacturer PGCNC. Technologies used in the torch significantly increase productivity and cutting speed. HD technology ensures better hole quality, higher piercing performance, and bevel cutting capabilities. This guarantees high quality, repeatability of cuts, and maximized productivity with minimal operating costs and high reliability.
SLAT TABLE
The slat table is manufactured using technology resistant to high working temperatures. This allows for continuous operation without the risk of burn-throughs that could prevent even placement of material on the work table. The arrangement of slats can be easily adjusted depending on the size of the parts being cut. The slat table is an excellent solution for cutting thicker materials.
SOFTWARE
The machine is equipped with 2D Starfire CAD/CAM software. Users have access to a variety of functions, including the ability to import ready-made designs in vector formats such as .dxf, .plt, .ai, and .eps. The software enables fast and precise creation of cutting paths.
POWER SOURCE
The machine comes standard with a 120A power source, featuring high efficiency as well as exceptional quality and cutting speed.
AUTOMATIC LUBRICATION SYSTEM
The plasma cutter is also equipped with an automatic lubrication system, which minimizes the need for machine maintenance. The central lubrication system is a simple, functional device for delivering oil to contact points between machine components.
- POWER SUPPLY 400V 50Hz
Godpjiqn Uuofx Afqott
- MAXIMUM SPEED 45 m/min
- GANTRY CLEARANCE 200-600 mm
- TYPE OF WORK TABLE: slat table
- WORK TABLE LOAD CAPACITY: 500 kg/m2
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Bitburg
758 km
Stroj za upogibanje cevi
METALLKRAFTRB 54
Klic
Stanje: novo, Leto izdelave: 2026, Mandrelless Tube Bending Machine
RB 54 – NC controlled, with large program memory
Item number: 4300054
NC control for setting bending angles
Up to 50 programs storable
High-quality, robust construction
Rapid tool change
Fully motorized drive
Automatically returns to starting position
TECHNICAL DATA
General Information
Maximum bending radius: 162 mm
Maximum bending angle: 210°
Bending speed: 2 rpm
Torque: 2,341 Nm
Dimensions and Weights
Length (approx.): 600 mm
Width/Depth (approx.): 220 mm
Godpfx Afsvk Scgsqstt
Height (approx.): 470 mm
Net weight (approx.): 107 kg
Bending Capacities
Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm
Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm
Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm
Electrical Data
Drive motor power: 1.1 kW
Connection voltage: 400 V
Mains frequency: 50 Hz
Location: ex stock
- immediately available -
Mali oglas
Babenhausen
617 km
Rezalnik kruha
WabämaR 300 EX
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, največja širina rezanja: 25 mm, vrsta vhodnega toka: trifazni, skupna dolžina: 750 mm, skupna širina: 620 mm, skupna višina: 860 mm, vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2025, potrebna višina: 860 mm, zahteva za prostor dolžina: 750 mm, potrebna širina: 620 mm, Rezkalnik kruha s krožnim rezilom
Wabäma model: R 300 EX
Univerzalni rezalnik med stroji za rezanje kruha
EX model za vgradnjo v prodajno vitrino!
Največje število rezin: 140 kos/min.
Največje dimenzije kruha: 250 x 320 x 140 mm, ŠxGxV
Stroj je premičen
Debelina rezanja nastavljiva od 4 do 25 mm
Priklop: 400V, 1,1 kW, vtič 16A-CEE
Dimenzije: 620 x 750 x 860 mm, ŠxGxV
Gtjdpjryr Hlofx Afqot
Rabljeni stroj
Imamo največjo izbiro rezalnikov kruha!
Mali oglas
Bitburg
758 km
Kombinirana žaga / rezalnik
SCM / HolzkraftMinimax St 5 es 32 - sofort verfügbar -
Klic
Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use
Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder
Item No.: 5501086
Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed
Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside
Saw unit tiltable from 90° to -45°
High-precision sliding table made of anodised aluminium
Large outrigger table (1200 x 650 mm)
With material roller and extendable aluminium telescopic fence up to 3300 mm
Tilting spindle moulder from 90° to -45° backwards into the fence
Four spindle speeds
Spindle with reversible direction of rotation
Three independent motors
Equipped with lockable main switch and motor protection switch
Standard with separate parallel rip fence and jointer fence for edge jointing
Equipment Details:
Sliding Table with Ball Contact System
Made of anodised aluminium
Guides of hardened and ground steel, 15% harder than standard steel
Twin-trunnion Spindle Moulder Unit
Tiltable, made of grey cast iron
Mounting points directly to the table for optimal smooth operation
Spindle located high on precision ball bearings for lowest bearing load and maximum service life
Powerful industrial motors
Spindle Moulder Fence
Heavy-duty professional version
High-quality grey cast iron fence supplied as standard with fine adjustment
3-positioned stops for quick repeatability
Fine adjustment via rack and pinion, numeric display and aluminium fence jaws
Rip Fence
With fine adjustment and quick clamping
Stable round bar guide made from ground steel
Easily foldable for large workpiece cutting
Reversible aluminium fence ruler for narrow workpieces
Gedsd Hx Hmepfx Afqett
Grey Cast Iron Twin-Trunnion Saw Unit
Height adjustment via dovetail guide
Extremely robust and torsion-resistant for precise cuts
Bearing close to saw blade on both sides
Height and angle tilting up to 45°
Scoring unit with separate 0.55 kW scorer motor as standard
Outrigger with angle-adjustable telescopic crosscut fence
with mitre scale
Dimensions & Weights
Approx. weight 900 kg
Dust Extraction Connection
Extraction port diameter 3 x 120 mm
Extraction port diameter blade guard 80 mm
Drive Power
Scorer Motor 0.55 kW
Main Motors 2 x 5.0 kW
Electrical Data
Voltage 400 V
Sliding Table and Table
Sliding table width 360 mm
Sliding table height 142 mm
Table length 1380 mm
Table width 465 mm
Spindle Moulder
Spindle tilt 0 – -45°
Usable spindle length 125 mm
Spindle speeds 3500/6000/8000/10000 rpm
Max. Cutter Diameter
lowerable 240 mm
Tenoning 320 mm
Panel Saw Unit and Scorer
Cutting length 3200 mm
Cutting width with rip fence 900 mm
Max. crosscut width left of blade 3300 mm
Saw blade tilt 90 – 45°
Max. cutting height 90° 104 mm
Max. cutting height 45° 68 mm
Location: Ex stock 54634 Bitburg
- available immediately -
Mali oglas
Babenhausen
617 km
Rezalnik kruha
JACVaria Pro 1000
Klic
Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025, vhodna napetost: 230 V, trajanje garancije: 24 meseci, Certificirano po DGUV do: 12/2027, največja širina rezanja: 30 mm, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 746 mm, skupna širina: 990 mm, skupna višina: 1.080 mm, krmilna napetost: 24 V, nazivna moč: 1 kW (1,36 KM), vhodna frekvenca: 50 Hz, potrebna višina: 1.080 mm, zahteva za prostor dolžina: 746 mm, potrebna širina: 990 mm, NOVO NOVO Rezalni stroj JAC NOVO NOVO
Stroj za rezanje kruha
Model: Varia Pro 1000 ...najboljši model!
Gtedpfx Afeh Ia Sfsqet
enostavno upravljanje
200 rezin/min
širina reza/dolžina kruha 490 mm
stroj s krožnim nožem
ročni način upravljanja
debeljina rezin nastavljiva od 4 do 30 mm
Mere: 990 x 746 x 1080 mm (Š x G x V)
Največje mere kruha: 490 x 340 x 160 mm (D x G x V)
samo pri nas – pregled DGUV V3
priklop 230V, 1 kW
nov stroj
z garancijo in rezervnimi deli
Možnosti:
- iz nerjavečega jekla
- samodejna prijemalka
- nosilec za vrečke
- posebne barve
- sprednja polica za kruh
vzdrževalna pogodba
servis dostave
uvajanje in zagon
Obiščite našo veliko prodajno skladišče za pekarske stroje!
Olajšamo vam iskanje: "rezalnik cevi"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Rezalnik Cevi (8.141)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec































































































































































































