Retrofit nakup rabljenega (1.451)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas
Triptis
562 km
Šasija
FlieglSDS 390 Fahrgestell für nachträglichen Tankaufbau
Klic
Stanje: novo, številka stroja/vozila: f80f2330e1318ef03bc20755e, lastna masa: 3.200 kg, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information:
Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, only 2 longitudinal frame members as double-T beams for subsequent attachment of a front end gantry in the latest/current version, outer frame slightly inclined with load-lock profile for tie-down strap hooks (Note: to hook-in the straps in connection with side walls, the side boards must be opened!), 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without compensating slide, wheel chocks with bracket, folding aluminium side underrun protection, extendable galvanized steel rear underrun guard, half-shell mudguards delivered loose, not installed, with anti-spray splash guards behind each axle, 1 plastic water tank, approx. 30l capacity, installed front left.
BPW disc brake axles with 430 mm disc diameter, axles/chassis laser-aligned to minimize tire and fuel consumption, air suspension, 1st axle automatic lift axle, also manually lowerable, operable via manual control on the vehicle.
2-line compressed air brake system with 1 standard central air tank, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting hose, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, EBS 2S/2M, test port for brake cylinder pressure at the external EBS module. Note: This trailer may only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve, control unit + brakes integrated into the frame as with a tipper semi-trailer, mounted in front of the axles.
Brake pad wear indicator for disc brakes via ABS/EBS lamp in the truck. 385/65 R22.5 Continental brand, steel rims, factory silver.
24 Volt, multi-chamber lights, side yellow LED lighting as on tipper semi-trailer, 3000 mm width must be observed, 2 front white LED position lamps, supplied loose, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without interconnecting cable.
Germany, EC 2007/46 type approval for complete vehicle, 24/7 service hotline, prepared for double number plate holder (single line), 1 x plastic and 1 x stainless steel interchangeable holder. Warning sign according to ECE - 70, aluminium, loose, EBS, safe parking, without contour markings / reflective tape according to ECE R 048.
Pedsi Riwqjpfx Aafsgu
Frame: DB 7350 Nova Grey, landing legs: Black coated
Available immediately!
mali oglas
Hilzingen
504 km
Avtomatski stroj za izsekovanje
BRUDERERBSTA 60
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, stiskalna sila: 60 t, Stroj po naročilu
Podpsxb D Daefx Aafogu
Hitroprebijalni avtomat BSTA 60 Retrofit / Splošna prenova
Predelava na električni pogon in novo Unidor PC krmiljenje.
Možna je razširitev prostora za vgradnjo orodij.
Za podrobne ponudbe nas kontaktirajte.
mali oglas
Frastanz
427 km
Zamrzovalnik pod pultom s 4 predali
NORDCAP IDEAL Unterbaukühltisch *Aktion*TKZ 2-70-2T, Tiefkühl - 4 Schubladen
Klic
Stanje: kot nova (razstavni stroj), *Special Offer: Stock Clearance*
Undercounter Freezer Table -15/-25°C with 4 doors.
Can be converted to chiller +2 / +7°C
For connection to a central refrigeration system
including control unit!!!
Exhibition unit – Never used commercially.
Original price approx. €6,100 + €2,400 (refrigerated drawers) = €8,500
External dimensions in mm (W x D x H): 1,200 x 660 x 700
Gross volume: 420 l Net volume: 348 l
Pgsdpfx Aevfqq Seafeu
Suitable for GN 1/1
For deep-freezing / cooling / storage of meat, vegetables and beverages
ready for installation
Refrigerant and condensate lines protected and routed in the rear panel
energy-saving 24V fans, protected in removable stainless steel fan housing, adjustable fan speed
Base configuration without worktop
4 x solid doors, stainless steel, flush front door and drawer panels, self-closing, hinges for door hold-open positions (60°, 90°, 120°, 180°), frame heating, stainless steel handle strip, door hinges left / left / right / right, magnetic gasket (can be changed without tools)
Useful door height in mm: 520
Modular casing for customized combination of GN 1/1, GN 2/1 and built-in elements in various sizes (½, ⅓, ⅔), can be retrofitted and replaced easily, slotted crossbars and drawer guides (for drawers) can be dismantled without tools
Interior with rounded corners, recessed floor pan, removable condenser filter, suitable for dishwasher cleaning
IDEAL AKE control unit 2.4” touch display
LCD touchscreen, evaporator fan regulation, ECO mode, switchable night mode, multilingual
automatic defrost (hot gas), condensate pan with dirt deflector, removable, dishwasher safe, automatic condensate evaporation
Machine compartment on right side, width in mm: 250, removable condensate tray, suitable for dishwasher cleaning, unit fully extendable for maintenance/cleaning, wiring/components easily accessible
Evaporator, 4D airflow between drawer front and drawer basket, protected in stainless steel housing, 45° pivotable, with special duplex coating, highest corrosion protection in salt spray test per DIN EN ISO 9227
More details in the pictures!

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Ruhstorf
283 km
Ploščati dostavnik
CitroenJumpy Kasten Club 3,1t 2.0D*Tempom PDC Bluetoo
Klic
Stanje: rabljeno, prevoženi kilometri: 93.578 km, moč: 90 kW (122,37 KM), vrsta goriva: dizel, prva registracija: 03/2021, emisijski razred: Euro 6, barva: bela, Leto izdelave: 2021, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, tempomat, * Na naši spletni strani najdete še 1500 vozil, možen je leasing in financiranje tudi brez pologa! *Naše cene so cene pri plačilu z gotovino, torej se dodatna dela kot so npr. naknadna vgradnja vlečne kljuke, drugi komplet pnevmatik, servis, garancija, paketi brezskrbnosti ipd. zaračunavajo posebej. *Kljub največji skrbnosti napak v oglasih ni mogoče izključiti, zato so brez garancije! Pridržujemo si pravico do napak pri vnosu, vmesne prodaje in zmot. Podatki o opremi in porabi temeljijo na poizvedbi podatkov VIN prek sistema DAT SilverDAT. Podatki VIN ne postanejo del prodajne pogodbe. *Naša nova vozila: Zaradi različnih zahtev proizvajalcev se lahko zgodi, da imajo ta vozila že enodnevno ali kratkotrajno registracijo ali jo bodo pred prodajo še pridobila.* ... Spremembe, vmesna prodaja in napake pridržane.
Pgjdowyrqzopfx Aafju
mali oglas
Emmendingen
584 km
Popolnoma avtomatska krožna žaga
EiseleVA-L-PV(CNC)
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, General overhaul 2025
Saw blade: 350 - 400 mm
Motor power: 6.5 / 8.5 kW
Speed: 1500/3000 rpm
Cutting speed: 1650 – 3800 m/min
Saw height adjustment: electronic
Working range, square max.: 120x120 mm
Working range, flat max.: 200x100 mm
Working range, flat (extra wide) max.: 250x70 mm
Working range, round max.: 130 mm
Saw feed rate: 0 – 40 mm/s, infinitely adjustable
Podpfx Aaoxpqzhsfogu
Cut-off length: 5-600 mm (up to 9999 mm with multiple strokes)
Feed speed max.: 500 mm/s
Weight approx.: 1300 kg
Dimensions (LxWxH): 1800mm x 1300mm x 1950mm
The machine will undergo a complete general overhaul at our facility and will be in like-new condition afterwards. Among other things, the following components will be renewed:
- Conversion to PLC control
- Conversion to Siemens HMI operator interface
- Conversion to ball screw drive with servo control
- New electrical components
- New pneumatic lines
- New pneumatic components
- Retrofitting to valve terminal
- Optimization of extraction performance
- New minimum-quantity lubrication system
- Replacement of general wear parts
- Overhaul of the enclosure
The machine is additionally equipped with:
- Soundproof enclosure
- Kerf widening system (for high-quality cut surfaces without return marks)
Optional equipment:
- Mass clamping system for parallel sawing of multiple workpieces
- Flat magazine for automatic feeding of raw materials up to 6 m in length
- 7.5 kW motor
- 12 kW motor
- Delivery and installation at your location
- Training of your staff
mali oglas
Wijchen
922 km
Safan SMK40-2100 stiskalnice
SafanSMK40-2100
Klic
Stanje: rabljeno, skupna dolžina: 2.500 mm, skupna širina: 2.400 mm, skupna višina: 2.400 mm, Teža: 4.000 kg
Cena: Po dogovoru
Upogibni stroj, upogibna stiskalnica
Model: CNC
Model: Električni
Proizvajalec: Safan
Tip: SMK 40-2050 / E-Brake
Retrofit kontrola: Delem DA-53T
Kapaciteta: 40t
Največja delovna širina: 2050mm
Krmiljene osi: Y1/Y2 - X
Dimenzije stroja: 2650x1750x2600mm
Teža stroja: 5000kg
- Dokumentacija na voljo: Ne
- Transportne dimenzije: 2500mm x 2400mm x 2400mm (d x š x v)
- Transportna teža [kg]: 4000kg
Finančne informacije
DDV: Cena je navedena brez DDV
DDV/obdavčitev po razliki: DDV je odbiten za podjetnike
Pgjdpfx Aaownhxksfeu
Dostava in odkup možna kadarkoli za vso industrijsko opremo
Lukas van Rossum
mali oglas
Strassberg
500 km
Avtomatski stroj za izsekovanje
KAISERV 40 W 600
Klic
Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 131 542, Pressing force: 40 t
Pgedpfouqc Ezjx Aafsu
Adjustable ram stroke: 8 - 50 mm
Ram adjustment: 50 mm
Shut height (stroke bottom, adjustment top): 290 mm
Distance between uprights (L-R): 600 mm
Distance between uprights (sideways): 190 mm
Table clamping surface approx.: 600 x 500 mm
Ram clamping surface approx.: 600 x 400 mm
Pass-through opening in table: 500 x 110 mm
Strokes per minute: 65 - 400 min-1
Table height above floor: 1100 mm
Power requirement: 32 kW
Height above floor approx.: 2,800 mm
Machine weight approx.: 6.2 t
Additional equipment:
The machine was retrofitted with a roller feed in 2002
Model MWVL-200, year of manufacture 2002
mali oglas
Settimo Milanese
466 km
Stroj za brušenje notranjih površin in čelnih ploskev
VOUMARD400 CNC
Klic
Stanje: potreben popravila (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Technical data Voumard 400 CNC
(POSSIBILITY OF A COMPLETE RETROFIT)
Minimum grinding diameter: 20 mm
Maximum grinding diameter: 300 mm
Maximum grinding depth: 300 mm
Maximum workpiece and steady rest length: 1500 mm
Centre height: 300 mm
Axis travel: Longitudinal (Z-axis): 650 mm
Transverse (X-axis): 150 mm
Workpiece spindle: max. 1,000 rpm
(B-axis) +2°/-20°, manually adjustable on workpiece head
(B1-axis) turret for CNC-controlled spindle change
Psdpfx Aaoxpf Ezjfsgu
Maximum axis feed rate: Z/X: 12,000 mm/min
Grinding head 1: Grinding motor power 7 kW, 15,000 rpm
Grinding head 2: Grinding motor power 7.8 kW, 12,000 rpm
Approximate machine weight: 9,500 kg
Machine dimensions:
Length: 5,000 mm
Width: 2,300 mm
Height: 2,400 mm
New Siemens 840D sl control system
mali oglas
Bad Honnef
756 km
Odstranjevalec prahu za čist zrak AL-KO POWER UNIT 350 P-FU
AL-KOReinluftentstauber AL-KO POWER UNIT 350 P-FU
Klic
Stanje: novo, with compressed air cleaning and frequency converter
Startup via frequency converter,
pressure transmitter for demand-driven regulation
Pre-separator integrated,
extinguishing system integrated
Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption.
Simple yet highly effective: OPTI JET cleaning and bag filter with snap ring fastening.
Exceptionally efficient: Energy-efficient drive systems according to IE3.
Safe in emergencies: Maintenance-friendly automatic extinguishing system.
Exceptionally quiet: Sound-insulated air recirculation from AL-KO.
All options available: PLC control for manual and automatic operation.
Countless options available, from machine recognition and slide gate control to frequency-controlled operation, to name just a few examples.
Nothing is left to chance: Collection container with inspection window.
Practical down to the details: Container locking with ergonomically shaped tension lever.
Easily upgradable: Retrofitting for discharge via briquetting press or rotary valve possible.
- high extraction capacity
- compact footprint
- 100% air recirculation with no temperature loss
- (residual dust < 0.1 mg/m³)
- integrated pre-separator and expandable control system
- optimum filter cleaning
- minimal noise level
- optional: patented level monitoring
- maintenance-friendly, certified automatic fire extinguishing system
- dust barrier for dust-free container change
- (optional: container safety interlock)
- freely configurable and expandable module exchange
----- Technical Data -----
Extraction nozzle Ø: 350 mm,
Nominal air flow: 6,927 m³/h,
Max. air flow: 8,500 m³/h,
Max. negative pressure: 2,543 Pa,
Filter area: 73 m²,
Chip collection volume: 3 x 250 liters,
Number of bags: 3 pcs,
Motor 400 V: 11.0 kW,
Pgodpfx Aasxpximsfsu
Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm,
Sound pressure level: 71 dB(A),
Weight: 999 kg,
according to: GS - HO - 07
mali oglas
Ruhstorf
283 km
Ploščati dostavnik
VWT6.1 Kasten KR 2.0TDI*R-Kam Klima AppConn Blueto
Klic
Stanje: rabljeno, prevoženi kilometri: 103.002 km, moč: 81 kW (110,13 KM), vrsta goriva: dizel, prva registracija: 08/2022, emisijski razred: Euro 6, barva: bela, Leto izdelave: 2022, gorivo: dizel, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, registracija tovornjaka, sistem za imobilizacijo, * Na naši spletni strani najdete še 1500 vozil, možen je leasing in financiranje tudi brez pologa! *Naše cene so cene pri plačilu z gotovino, torej se dodatna dela kot so npr. naknadna vgradnja vlečne kljuke, drugi komplet pnevmatik, servis, garancija, paketi brezskrbnosti ipd. zaračunavajo posebej. *Kljub največji skrbnosti napak v oglasih ni mogoče izključiti, zato so brez garancije! Pridržujemo si pravico do napak pri vnosu, vmesne prodaje in zmot. Podatki o opremi in porabi temeljijo na poizvedbi podatkov VIN prek sistema DAT SilverDAT. Podatki VIN ne postanejo del prodajne pogodbe. *Naša nova vozila: Zaradi različnih zahtev proizvajalcev se lahko zgodi, da imajo ta vozila že enodnevno ali kratkotrajno registracijo ali jo bodo pred prodajo še pridobila.* ... Spremembe, vmesna prodaja in napake pridržane.
Pgedpfx Aaswyib Rjfsu
mali oglas
Emmendingen
584 km
Avtomatska žaga za jeklo
KaltenbachKKS 401 / 451 NA 2000
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Circular Saw Blade VHM / HSS: max. 425 mm
Drive Power:
- Two-stage with chain: 1.7/2.6 kW
- Two-stage with belt pulley: 3.7/4.5 kW
Cutting Speed (saw blade 400 mm):
- Two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min
- Two-stage with belt pulley: 20/40 m/min, 30/60 m/min
Continuously adjustable saw height control, fully electronic
Working Range Square 90° max.: 120 x 120 mm
45° max.:
Working Range Flat: 90° max.: 230 x 80 mm
45° max.:
Working Range Round: 90° max.: 140 mm
45° max.:
Feed Length Single Stroke: 5-2000 mm
Multiple Stroke: 5-9999 mm
Feed Speed AC Servo max.: 500 mm/s
Weight approx.: 3600 kg
Dimensions (LxWxH): 3500 mm x 1300 mm x 2100 mm
Installation Area LxW: 3500 mm x 1300 mm
Technical Description Kaltenbach KKS 401/ KKS 451 NA 2000 Retrofit
Kaltenbach KKS 401/ KKS 451 Retrofit
High-performance automatic saw for steel.
Thanks to its features and construction, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures easy and straightforward operation. Due to the saw design, it is possible to achieve highly accurate length tolerances.
Pjdpfx Aouiy Sboafogu
The machine is completely overhauled in our factory according to customer requirements. Among others, the following components are renewed:
- Conversion to Siemens S7 PLC control
- Upgrade to Siemens HMI operating panel
- Replacement of the ball screw
- Replacement of servo motor and servo drive
- Replacement of the frequency inverter for the main saw drive
- New electronic components
- Maintenance or replacement of all hydraulic cylinders and valve manifolds
- Optimization and overhaul of the cooling system
- Replacement of general wear parts
- Overhaul of the machine body
The machine also features:
- Fully automatic material feed
- Fully automatic mitre adjustment +/- 60°
Warranty:
Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor, as well as consumables, are excluded from the warranty.
Optional:
- Chip conveyor
- Chain magazine for 6m material
- Outfeed gripper system for removal of cut-offs
- Outfeed gripper system for removal of cut-offs and multiple end trimming
- Delivery and installation at your site
- Training for your personnel
mali oglas
Budapest
343 km
Stroj za luknjanje in odrezovanje
TRUMPFTruPunch 3000 S20
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 60 h, Funkcionalnost: popolnoma funkcionalen, +++ Bemutató gép kb. 60 üzemórával +++
+++ Süllyesztett szerszám +++
Alapgép:
TruPunch 3000 nagy formátumú (S20)
Gép
Doboztartó vázszerkezet
Hibrid tengelyrendszer
Lineáris szerszám- és befogó tár, 24 állással
Hidraulikus befogók (3x)
Karbantartásmentes, háromfázisú motoros hajtások
Újrapozicionálás programozható lenyomólábbal
Befogó zárását vezérlő lábkapcsoló
Alkatrésztorok, jobb oldal
Alkatrészeltávolító csapóajtó, bal oldal
Alkatrészeltávolító csapóajtó érzékelő
SortMaster Compact utólagos felszerelhetőség
Lyukasztóegység
Delta Drive
Forgó, egyállomásos szerszámtartó adapter
Programozható lenyomóláb pozíció
Szerszámhossz kompenzáció
Lyukasztószerszám permetező kenés
Hulladékelszívó vákuum
Alakító funkció
Ütésszámláló
Vezérlés
TRUMPF vezérlő, Rexroth IndraMotion MTX alapokon
19" TFT színes érintőkijelző
Touchpoint kezelőfelület
Automatikus leállítás
Távdiagnosztikai interfész
Programmenedzser
Gyártási terv
Adatátvitel
Central Link
Online Frissítés Kezelő
Biztonság
CE-jelölés és Gépdirektíva
Kétsugaras biztonsági fénysorompó
Fejlett alapkivitel
Első indexcsap (jobb belső)
Golyóasztalok
Alkatrésztorok készalkatrész-tartályhoz
Forgácsgyűjtő tartály hátrafelé történő eltávolításhoz
Fejlett gép és lyukasztó felszereltség:
MultiTool funkció
MultiShear funkció
MultiBend funkció
Menetvágási funkció menetszámlálóval
Törött menetfúró ellenőrzés
Kenőanyag szintellenőrzés
Korlátlan idejű licenc
Jelölő / gyors merevítés / vásárolható
Gravírozó funkció
Sorfalak köszörülési és hengeres technológiai funkció
Adaptív ütéskalibráció
StripLine
Süllyesztő szerszám kenése szintellenőrzéssel
Süllyesztett szerszám
Integrált síkítási funkció
Intelligens lyukasztás-felügyelet
További befogó
Magasságban állítható befogó
Rezgéscsillapítás
Forgácsgyűjtő elölre történő eltávolításhoz
Kefeasztalok be- és kirakodást segítő rendszerrel
Pgsdpfx Aajxmfc Usfou
Hullámos lemez felismerése
Műszaki adatok
TruPunch 3000 nagy formátumú (S20)
Méretek, tömeg
Szélesség: 7644 mm
Mélység: 7666 mm
Magasság: 2200 mm
Össztömeg (összes egységgel): 13800 kg
Vezérlés, hardver, elektronika
Merevlemez típusa: SSD
Merevlemezek száma és mérete: 2 db, 120 GB
Felhasználói programokra rendelkezésre álló tárhely: 10 GB
Kijelző: érintőkijelző
Kijelzőméret: 21,5"
Interfész: USB
Hálózati csatlakozás: RJ45
Vezérlő típusa: Bosch CML75
Operációs rendszer: Windows 10 IoT
Tengelyadatok
X/Y/C tengelymeghajtás: NC-vezérlésű, háromfázisú karbantartásmentes szervomotorok
Lyukasztófej meghajtás: Elektromos hajtás
Max. tengelysebesség – X tengely: 90 m/perc
Max. tengelysebesség – Y tengely: 60 m/perc
Max. egyidejű tengelysebesség: 108 m/perc
Max. C tengely (lyukasztás) sebesség: 350 ford./perc
Max. C tengely (menetvágás) sebesség: 350 ford./perc
Max. lyukasztóütem (E = 1 mm): 690 1/perc
Max. jelölőütem: 1000 1/perc
Pontosság – Pozicionálási eltérés Pa: +/- 0,1 mm
Pontosság – Pozíciótartomány Ps: +/- 0,03 mm
Legkisebb programozható lépés: 0,001 mm
Munkatartomány és munkadarab méret
Max. lemezvastagság: 6,4 mm
Max. munkadarab tömeg: 230 kg
Munkatartomány – X tengely: 3000 mm
Munkatartomány – Y tengely: 1550 mm
Lyukasztás specifikus adatok
Max. lyukasztóerő: 180 kN
Max. lenyomóláb ereje: 20 kN
Max. szerszámméret lyukasztáshoz (külső kör): 76,2 mm
Max. szerszámméret alakításhoz (külső kör): 101,6 mm
mali oglas
Strassberg
500 km
Ekscentrična stiskalnica z enim stolpcem
W. Paul MüllerExP 160
Klic
Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t
Throat depth: 350 mm
Ram stroke: 20 - 140 mm
Ram adjustment: 75 mm
Installation height (stroke down, adjustment up): 740 mm
Table clamping surface approx.: 1000 x 680 mm
Ram clamping surface approx.: 600 x 300 mm
Strokes per minute: 50 min⁻¹
Power requirement: 15 kW
Machine weight approx.: 12 t
Standard equipment:
Machine includes:
Pgjdpfxsuqdwxo Aafju
- Guard
HS Decoiler M 15 / 500 - Year of manufacture 2009
Material width: 15 - 500 mm
Coil weight: 1.5 t
Coil outside diameter: 1400 mm
Coil inside diameter: 380 - 530 mm
HS Straightening Machine RME 40 - 9 - Year of manufacture 2009
Material thickness: 0.4 - 2 mm
Number of feed rollers: 2 pcs
Number of straightening rollers: 9 pcs
Straightening roller diameter: 61.9 mm
Feed roller diameter: 61.9 mm
Feed speed: 40 m/min
Feed length: 0 - 9999.99 mm
Additional equipment:
The machine was retrofitted with SIEMENS S7 control in 2009.
mali oglas
Annaberg-Buchholz
515 km
Drugi
MULTICARM30 Fumo Carrier Kommunal/AHK/4x4/Klima/Standhzg
Klic
Stanje: rabljeno, prevoženi kilometri: 104.487 km, moč: 107 kW (145,48 KM), prva registracija: 08/2011, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 5, širina tovornega prostora: 1.600 mm, dolžina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2011, število sedežev: 2, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, Multicar M30 FUMO Carrier 4x4 Three-way Tipper, Short Wheelbase, 3.0l Diesel Engine, 107 kW/145 HP, Euro 5, with Large Municipal Hydraulic System, Air Conditioning, and Auxiliary Heater, Municipal Orange RAL 2011 – Ready for Immediate Use!
First registration: 08/2012
Mileage: 104,487 km
Engine hours (vehicle): 7,958 h
Engine hours (hydraulics): 1,374 h
Previous owner: 1st hand, municipal vehicle from original owner
—
* Iveco engine 3.0, 107 kW/145 HP, Euro 5 with DPF
* 5-speed manual transmission
* Gross vehicle weight 5,200 kg (downloadable to 3,500 kg)
* Digital tachograph/recording device
* Pioneer radio with CD player
Pjdpfevwhzrex Aafegu
* Air conditioning
* Webasto auxiliary heater with timer
* Electrically adjustable and heated exterior mirrors
* Electric window lifters
* Three-way tipper body completely new! (The vehicle previously had a refuse compactor body)
* 3KH tipping cylinder module
* Trailer coupling (ball-type) – towing capacity 3,500 kg
* (Maul-type trailer hitch – towing capacity 3,500 kg can be retrofitted)
* Engagable four-wheel drive with mechanical rear axle differential lock and reduction
* Large municipal hydraulic system
* Hydraulic system for tipping trailer
* Amber rotating beacon
* Light bar + auxiliary front lights
* ISRI fully adjustable driver’s suspension seat and co-driver seat
* Front mounting plate for attachments, quick-change system SWV 500
* 4x winter tyres 225/75R16C
* New professional snow plough for municipal use (2.0 m or 2.20 m wide) available at additional cost
—
Immediately drivable and operational vehicle from first owner, in neat and well-maintained condition!
Previously used by city sanitation as a refuse collector with compactor body, hence no use in winter service – no rust present! Low hydraulic hours!
MOT/emissions inspection, battery, and maintenance service will be renewed upon delivery!
—
Your contact for this vehicle:
Daniel Seidler
Tel:
Mobile: (also via WhatsApp)
Email:
Subject to errors and changes!
mali oglas
Bad Honnef
756 km
Odsesovalec prahu s čistim zrakom AL-KO POWER UNIT 300 P
AL-KOReinluftentstauber AL-KO POWER UNIT 300 P
Klic
Stanje: novo, Pre-separator integrated
Automatic fire extinguishing system integrated
Efficient and economical: Large-capacity compressed air tank with rapid-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption.
Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure.
Exceptionally economical: Energy-efficient drives in accordance with IE3.
Safety first: Maintenance-friendly automatic fire extinguishing system.
Exceptionally quiet operation: Sound-insulated air recirculation by AL-KO.
Flexible control: PLC control system for manual and automatic operation.
Countless options available: From machine recognition and slide gate control to frequency-controlled operation, to name just a few.
No risk of spillage: Collection container with inspection window.
Practical down to the last detail: Container locking system with ergonomically shaped tension lever.
Retrofittable: Can be converted for discharge via briquette press or rotary valve.
- High suction performance
- Minimal space requirement
- 100% air recirculation with no heat loss (residual dust < 0.1 mg/m³)
- Integrated pre-separator and expandable control system
- Optimal filter cleaning
- Minimal noise level
- Optional: patented fill level monitoring
- Maintenance-friendly, certified automatic fire extinguishing system
- Dust barrier for dust-free container changeover
- (Optional: safety lock for containers)
- Freely configurable modular design – expandable and upgradable
----- Technical Data -----
Extraction nozzle Ø: 300 mm
Nominal air flow: 5,089 m³/h
Maximum air flow: 6,000 m³/h
Maximum negative pressure: 2,587 Pa
Filter area: 30 m²
Chip/dust collection capacity: 3 x 250 litres
Number of bags: 3 pieces
Motor 400 V: 7.5 kW
Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm
Sound pressure level: 71 dB(A)
Weight: 838 kg
Compliant with: GS - HO - 07
Pgsdpfx Aou R S A Reafeu
- new display machine -
mali oglas
Saarbrücken
696 km
Merilni mikroskop / multisenzorski merilni stroj
MahrMS 222 Komplettpaket mit Lieferung*
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, trajanje garancije: 12 meseci, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 200 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Completely overhauled multisensor measuring device Mahr MS 222 (optical measuring instrument)
LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany*
Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025.
INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support.
Delivery with factory service or via shipping company, worldwide delivery possible!
Online or on-site demonstrations with customer parts as well as application-specific consulting provided by accredited Profitech inspection laboratories during project planning.
Complete service available upon request:
– Delivery, installation, commissioning, norm-compliant accuracy verification, certification, and comprehensive acceptance documentation. Customized training programs also available as online courses.
Rental, hire-purchase, or financing available directly via Profitech, with no bank required. Measuring device can be configured individually to customer needs.
Measuring range:
200 x 200 x 200 mm
Load capacity (glass plate): 10kg
Scale resolution: 0.1μm
Max. traverse speed: 150mm/s
Dimensions: 900 x 750 x 950mm
Machine weight: 170kg
Control cabinet weight: 90kg
Length measurement uncertainty:
According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm
Optional extension: Renishaw probe system (TP20, TP200, SP25) available on request
Retrofit 2025
Including PC and software
Maximum traverse speed: 150mm/s
Pjdpfx Aeglp Nqoafsgu
Dimensions: 900 x 750 x 950
Weight: approx. 90 kg
Sample image by manufacturer
*Commissioning, on-site calibration, and training are not included
mali oglas
Emmendingen
584 km
Avtomatska žaga za aluminij
EiseleVA-L-560/600
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024
Year of manufacture: 1994-2000
Saw blade: 560 mm
Motor power: 6.5 / 8.0 kW
Rotation speed: 1,500/3,000 rpm
Cutting speed: 2,100 – 4,200 m/min
Saw height adjustment: electronic
Working range (square): max. 170 x 170 mm
Working range (flat): max. 300 x 150 mm
Working range (round): max. 200 mm
Saw feed rate: 0 – 40 mm/s, continuously adjustable
Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke)
Feed speed (max.): 500 mm/s
Weight: approx. 1,900 kg
Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm
The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level.
The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed:
- Conversion to Siemens S7 PLC control
- Conversion to Siemens HMI operator interface
- Replacement of the ball screw spindle
- Replacement of servo motor and servo drive
- New electrical components
- New pneumatic lines
- New pneumatic components
- Overhaul or replacement of all pneumatic cylinders
- Renewal of valve terminal
- Optimization of extraction performance
- Overhaul of the minimum quantity lubrication system
- Replacement of general wear parts
- Overhaul of the cabin
Psdpsuiy Hrjfx Aafegu
Additional machine features:
- Soundproof enclosure
- Kerf expansion (for high-quality cut surfaces without return marks)
- Fully electronic height adjustment
Warranty:
Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty.
Optional (available on request):
- Bar clamping device for parallel sawing of multiple workpieces
- Flat magazine for automatic loading of pre-materials up to 6 meters in length
- Roller conveyors for pre-material
- Reinforced 18.0 kW (frequency-controlled) motor
- Delivery and installation at your facility
- Training for your personnel
mali oglas
Kirchheim bei München
332 km
Univerzalni obdelovalni center
DMGDMU 125 P highdyn
Klic
Stanje: dober (rabljeno), Leto izdelave: 2000, 1250 mm x 880 mm x 800 mm
Glavno vreteno: 12.000 vrt./min
H/V glava
NC rotacijska miza, C-os
Krmilje Heidenhain MillPlus
Pgodpfx Aoxfi I Eoafou
SK-40
Menjalnik orodij za 30 orodij
IKZ 40 bar z dodatno nameščenim režnim filtrom
Transporter za ostružke
Elektronski ročni volan
Podajalna hitrost: 15.000 mm/min
Hitri pomik: 40 m/min
Teža stroja: 12.200 kg
Priključna moč: 46,00 kVA
mali oglas
Strassberg
500 km
Avtomatski stroj za izsekovanje
RASTER ZEULENRODAHR 315 / 1600 - NL / RK
Klic
Stanje: rabljeno, Leto izdelave: 1997, Pressing force: 315 t
Adjustable ram stroke: 30 - 100 mm
Ram adjustment: 100 mm
Shut height (stroke down, adjustment up): 370 mm
Table clamping surface approx.: 1600 x 1100 mm
Ram clamping surface approx.: 1600 x 1100 mm
Pass-through opening in table: 600 x 180 mm
Strokes per minute: 15 - 180 min⁻¹
Table height above floor: 1200 mm
Pgodpfx Aasuqd Tmsfeu
Power requirement: 170 kW
Height above floor approx.: 4900 mm
Dimensions LxWxH: 4900 x 1900 x 4900 mm
Machine weight approx.: 55 t
Standard equipment
The press was retrofitted to CE standard in 2015. The press is equipped with a SIEMENS S7 control system. The coil line still uses a SIEMENS S5 control system.
Additional equipment
Stroke bars in the press table
Automation
KEMMERICH coil line consisting of:
Uncoiler: load capacity: 5 t
Straightening machine: roller diameter: 70 mm, strip width: 300 mm
Roll feed: roller diameter: 160 mm, feed length: 0.1 – 9,999.9 mm, strip width: 30 – 350 mm, material thickness: 0.2 – 10 mm, material cross-section: 1,500 mm², feed accuracy: +/- 0.05 mm
Loading station
mali oglas
Annaberg-Buchholz
515 km
Drugi
MULTICARM30 Fumo Carrier Winterdienst/4x4/Klima/Standhzg
Klic
Stanje: rabljeno, prevoženi kilometri: 104.487 km, moč: 107 kW (145,48 KM), prva registracija: 08/2011, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 5, širina tovornega prostora: 1.600 mm, dolžina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2011, število sedežev: 2, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, Multicar M30 FUMO Carrier 4x4 3-Way Tipper, Short Wheelbase, 3.0L Diesel Engine, 107kW/145HP Euro 5, fitted with Heavy-Duty Municipal Hydraulic System, Winter Service Equipment, Air Conditioning, and Parking Heater, finished in Municipal Orange RAL 2011 - Ready for Immediate Operation!
First Registered: 08/2012
Mileage: 104,487 km
Operating Hours (Vehicle): 7,958 h
Operating Hours (Hydraulics): 1,374 h
Previous Owner: First hand, ex-municipal vehicle
---
• Iveco Engine 3.0, 107 kW/145 HP, EURO 5 with DPF
• 5-speed manual transmission
• Gross Vehicle Weight: 5,200 kg (downrated to 3,500 kg possible)
• Digital tachograph
• Pioneer radio with CD player
• Air conditioning
• Webasto auxiliary heater with timer
• Electrically adjustable and heated exterior mirrors
• Electric windows
• Fiedler FRS200 municipal snow plough, 2.0m wide
• Küpper Weisser IMSSE J15012HFS gritter with brine tank
• Trailer coupling with ball-type hitch – 3,500 kg towing capacity
• (Ring-type hitch – 3,500 kg towing capacity – can be retrofitted)
• Switchable all-wheel-drive with mechanical rear axle differential lock and reduction gear
• Heavy-duty municipal hydraulic system
• Trailer tipper hydraulics
• Amber rotating beacon
• Light bar + auxiliary work lights
• Driver’s air suspension seat and adjustable ISRI passenger seat
• Front-mount quick-change plate SWV 500 for attachments
• 4x winter tyres, 225/75R16C, as new
Pjdjvzlxpspfx Aafjgu
---
Immediately ready-to-drive and operational vehicle from first owner, in well-maintained and clean condition!
Previously used by municipal cleaning services as a refuse collector compactor truck, therefore not used in winter service – no rust! Low hydraulic operating hours!
MOT/emissions, battery, and service inspection will be new upon delivery!
---
Your contact for this vehicle:
Daniel Seidler
Tel:
Mobile: (also via WhatsApp)
Email:
Errors and changes excepted!
mali oglas
Emmendingen
584 km
Krožna žaga za lahke kovine / aluminij
KaltenbachRKL551 AX
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Year of overhaul: 2024
Maximum saw blade diameter, carbide-tipped: 500/550 mm
Saw motor power: 6 kW
Pedpfxeuiy Rqo Aafogu
Saw motor speed, 6 steps: 2400–3200 rpm
Saw blade cutting speed (500–550mm): 3800–5500 m/min
Saw blade feed, stepless adjustment: 0–40 mm/s
Saw height adjustment, stepless and fully electronic
Working range, square material at 90° max.: 160 x 160 mm
Working range, flat material at 90° max.: 380 x 60 mm
Working range, round material at 90° max.: 165 mm
Feed length: 10–9999 mm
Feed speed, AC servo max.: 400 mm/s
Compressed air supply required: 6 bar
Weight (saw): approx. 2850 kg
Dimensions LxWxH (saw): approx. 2900 mm x 1725 mm x 2200 mm
Required floor space LxW: 2900 mm x 1725 mm
Following a completed retrofit, the machine is in like-new technical and optical condition.
Thanks to its features and robust design, the machine is highly versatile and can be used efficiently across a wide range of applications. The positioning system ensures easy and highly cost-effective operation of the unit. The powerful drive motor enables short cycle times, even when sawing thick-walled profiles or solid materials. The sound enclosure minimizes operational noise emissions to an absolute minimum.
The machine will be fully overhauled in our facility according to customer requirements. The following work has been carried out, among others:
- Conversion to Siemens S7 PLC control
- Conversion to Siemens HMI operator panel
- Replacement of ball screw spindle
- Replacement of servomotor and servo drive
- Replacement of the main drive frequency inverter (optional)
- New electrical components
- New pneumatic lines
- Maintenance or replacement of all hydraulic cylinders and valve manifolds
- Overhaul of extraction system
- Overhaul of minimum-quantity lubrication system
- Replacement of general wear parts
- Overhaul of noise enclosure
Additional features:
- Sound enclosure
- Mechanical zero-point adjustment
Warranty:
Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty.
Optional equipment:
- Chain magazine for 4/6m materials
- Saw kerf extension (for a high-quality cut surface without return marks)
- Horizontal clamping for the saw line
- Squaring stop in the material feed unit
- Reinforced motor, 11 kW
- Roller conveyors
- Delivery and installation at your premises
- Staff training
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Annaberg-Buchholz
515 km
Šasija dostavnega vozila
MULTICARKiefer Boki 1152T 6x4/Klima/Sperre/SHZ
Klic
Stanje: rabljeno, prevoženi kilometri: 133.401 km, moč: 110 kW (149,56 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 7.490 kg, prva registracija: 08/2019, emisijski razred: Euro 6, barva: oranžna, število sedežev: 2, Leto izdelave: 2019, skupna dolžina: 5.250 mm, skupna širina: 1.700 mm, skupna višina: 2.190 mm, Oprema: ABS, filter saj, klimatska naprava, Kiefer Boki 1152T 6x4 Chassis, 3.0l Diesel Engine, 110 kW/150 hp, Euro 6, with All-Wheel Drive and Air Conditioning in Municipal Orange RAL 2011 – Ready for Immediate Use! ---- First registration: 08/2019
Mileage: 133,401 km
Pgodpfxovywike Aafju
Operating hours (vehicle): 5,114 h
Previous owner: 1st hand, ex-municipal vehicle
----
* Iveco engine 3.0 FPT F1C, 110 kW/150 hp, EURO 6c, 370 Nm torque, EU6c emission class, diesel particulate filter (DPF), SCR catalytic converter / AdBlue
* 10-speed fully synchronized reduction manual transmission
* Gross vehicle weight: 7,490 kg (payload: 4,000 kg)
* Maximum speed: 90 km/h
* Chassis: 6x2, selectable all-wheel drive 6x4
* Front steering
* 3rd axle hydraulically steered (hydraulically liftable)
* Wheelbase: 2nd axle 2,400 mm / 3rd axle 3,390 mm
* Winter tires: 285/65 R16
* Hydraulic / lift systems: 55 – 105 l/min up to 300 bar
* 2-circuit hydraulics
* Radio
* Air conditioning
* Heated seat
* Trailer coupling (ball coupling), trailer load 3,500 kg retrofittable
* Selectable all-wheel drive with mechanical differential lock and reduction
* Yellow rotating beacon
* Driver’s suspension seat with armrest and adjustable passenger seat (ISRI)
* Prepared for front mounting plate for quick-change attachments
* Hydraulic parking brake
----
The Boki 1152 T stands out with a permissible gross weight of 7.49 tonnes and a width of only 1.70 m. Thanks to the additionally liftable third axle, the Boki 1152 T is as agile as its two-axle counterparts. With a payload of up to four tonnes, a powerful 150 hp engine and a maximum speed of up to 90 km/h, virtually no wish is left unfulfilled. The innovative vehicle concept allows optimal use both as a transport vehicle and as a work machine. Multifunctional operation is ensured by the powerful hydraulic system and a wide range of body options.
Immediately roadworthy and ready-to-use vehicle from first owner, in good and well-maintained condition!
Previously used by municipal cleaning services as a refuse collector with compactor body, therefore not used for winter service – no rust present!
New general inspection (TÜV) and maintenance check upon delivery!
----
Contact person for this vehicle:
Daniel Seidler
Tel:
Mobile: (also WhatsApp)
Email:
Subject to errors and prior sale!
mali oglas
Emmendingen
584 km
Avtomatska žaga za jeklo
KastoWAC 70/ Wa C7
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Overhauled: 2024
Saw blade: 250–285 mm
Motor power: 5.5 kW
Cutting speed: 35–160 m/min
Working area, square max.: 15–60 mm
Working area, round max.: 15–70 mm
Saw feed: 2–100 mm/s, steplessly adjustable
Cut length: 5–250 mm
Material feed speed: max. 1000 mm/s
Weight (saw): approx. 1,500 kg
(magazine): approx. 800 kg
Dimensions LxWxH (saw): approx. 1100 mm x 1600 mm x 2300 mm
(magazine): approx. 7500 mm x 1400 mm x 1600 mm
This machine, thanks to its features and design, is suitable for mass cutting of steel and is the predecessor of the KASTOwa C7 and KASTOspeed C9.
Following a general overhaul (retrofit), the system will be in like-new condition, guaranteed by our company.
The machine will be fully refurbished in our workshop according to customer specifications. The following will be renewed or replaced, among others:
- New Siemens S7 PLC control
- Conversion to Siemens HMI
- Conversion to fully electronic cut length selection (optional)
- New electrical components
- New pneumatic lines
- Overhaul or replacement of all pneumatic components
Podpfxsuizlce Aafogu
- New hydraulic lines
- Overhaul or replacement of all hydraulic components
- Overhaul of Menzel minimum quantity lubrication system
- Replacement of common wear parts
- Overhaul of loading magazine
- Enhancement of the safety concept
Additional equipment:
- Drop-off magazine for 6 m bars
- Hydraulic material feed unit
Warranty:
Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and consumable/wear parts are excluded from warranty.
Options:
- Conversion to chip extraction
- Conversion to manual trapezoidal spindle stop 0–800 mm
- Conversion to fully electronic ball screw stop 0–800 mm
- Conversion of main saw drive to 18 kW
- Delivery and installation at your site
- Operator training
mali oglas
Emmendingen
584 km
Jeklena avtomatska žaga
EiseleVA2 NC
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Year of overhaul: 2024
Saw blade (carbide / HSS): 315 – 360 mm
Saw motor power: 15 kW
Stepless speed adjustment: 15 – 130 rpm
Cutting speed (saw blade 350 mm): 16.4 – 142.8 m/min
Saw height adjustment, stepless: electronic
Working area, square 90° max.: 100 x 100 mm
Working area, round 90° max.: 110 mm
Feed length: 5–970 mm (up to 9999 mm with multiple feed strokes)
Feed speed, AC servo, max.: 300 mm/s
Pgsdpeuizinofx Aafju
Compressed air connection (on-site): 6 bar
Saw weight approx.: 1800 kg
Dimensions (LxWxH): 1900 mm x 1250 mm x 2100 mm
Footprint (LxW): 1900 mm x 1250 mm
Thanks to its configuration and design, the machine is highly versatile and suitable for a wide range of applications. The HMI interface ensures simple and intuitive operation. Following completion of the retrofit, the machine's condition is as-new, both technically and visually. Inspection of this sawing system is possible at any time.
The machine is fully refurbished at our facility to customer specifications. Refurbishment includes, among other aspects:
- Conversion to Siemens S7 PLC control
- Replacement of the ball screw with servo control
- New electrical components
- Renewal of pneumatic lines
- New pneumatic components
- Overhaul or replacement of hydraulic lines
- Overhaul or replacement of hydraulic components
- Overhaul of the enclosure
- Overhaul of the motors
- Replacement of all bearings
- Replacement of all general wear parts
Additionally, the machine features:
- Reinforced 15 kW motor
- Soundproof enclosure
- Chip breaker extension (for high-quality cut surfaces without return marks)
- Variable frequency drive (motor speed control)
- Minimum quantity lubrication system
- Automatic central lubrication system
- Pneumatic chip removal at the saw blade
Warranty:
Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and consumable parts are excluded from the warranty.
Options:
- Bundle clamping device for parallel cutting of multiple workpieces
- Roller conveyor 4m / 6m
- Special roller conveyor 4m / 6m for bundle clamping
- Flat magazine for automatic feeding of input material up to 6m in length
- Online support connection
- Delivery and installation at your facility
- Training for your operators
mali oglas
Emmendingen
584 km
Krožna žaga za lahke kovine / aluminij
ElumatecSA 142
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142
Year of Retrofit: 2024
Max. Carbide Saw Blade Diameter: 500 mm
Saw Motor Power: 4 kW
Saw Motor Speed: 2800 rpm
Saw Blade Cutting Speed (500 mm): 4400 m/min
Saw Height Adjustment: Infinitely variable, fully electronic
Working Area Square 90° max.: 130 x 130 mm
Working Area Flat 90° max.: 190 x 130 mm
Working Area Round 90° max.: 150 mm
Pneumatic Feed Length: 5–560, 10–1120 mm
Compressed Air Connection Required: 6 bar
Weight (saw) approx.: 800 kg
Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm
Footprint LxW: 2900 mm x 1400 mm
Pgedsuiy Nyjpfx Aafeu
Additional Description Elumatec SA/ SAS 142 4kW Retrofit
Elumatec SA 142 4kW Retrofit
Fully automatic saw for non-ferrous metals and plastics
Following the completed retrofit, the machine is in as-new condition both technically and visually.
The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed:
- Conversion to Siemens S7 PLC control
- Upgrade to Siemens HMI operator panel
- New electrical components
- New pneumatic lines
- Maintenance or replacement of all pneumatic cylinders and valve assemblies
- Maintenance of minimum lubrication system
- Replacement of general wear parts
- Refurbishment of the safety enclosure
Warranty:
Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty.
Optional:
- Extension of the cutting range for flats at 90° max.: 300 x 120 mm
- Spacer extension (for a premium cut surface without drag marks)
- Servo-driven material feed
- Servo-driven saw blade feed
- Heavy-duty clamping device for material feed pusher
- Delivery and installation at your facility
- Operator training for your staff
Olajšamo vam iskanje: "retrofit"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Retrofit (1.451)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
































































































































































































