Prvenec Tiska nakup rabljenega (10.101)

Stanje: kot nova (razstavni stroj), - Press force: 700 kN Bedpfxewazno Afqsdk - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the heating plates in case of incorrect loading Price on request!

Leto izdelave: 2007, Stanje: skoraj kot novo (rabljeno),

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Attention – Do not buy used metallography equipment! Anyone familiar with metallography knows: “used” unfortunately means “worn out” in this context. Unless these devices are cleaned thoroughly on a daily basis, the high operational load will turn them into total losses within a few years. Bdodecwamxopfx Afqek The ECOPRESS 102 is an automatic hot mounting press featuring an electrohydraulic pressure system—so it does not require a separate compressed air connection. The system operates with a working pressure up to 300 bar and an embedding temperature up to 200°C. Embedding time is freely programmable up to 60 minutes. Thanks to its fully automatic program cycle and integrated automatic cooling system, fast cycle times are ensured: Thermostatically controlled heating and cooling cycles, 1650 W heating output, automatic cooling process. The ECOPRESS 102 is supplied with a single press cylinder and piston (optional intermediate piston for two samples) available in diameters of 25 / 30 / 40 / 50 mm (and inch sizes). The EXOPRESS 202 offers two mounting cylinders. Completion of the embedding process is signaled acoustically by the machine. Delivery is ready for operation (including the embedding cylinder, piston, and optional intermediate piston for two samples as required for your application). Necessary connections: 230V / 50 Hz, 1 phase (220V), water supply and drain. * 1650-watt heating output * Up to 200°C embedding temperature * Embedding time adjustable up to 60 minutes * Automatic cooling sequence * No compressed air required * 12-month warranty Delivery includes a starter/test kit of consumables comprising: * 5 x 1 kg (5 kg total) various mounting resins * Release agent (400 ml) Delivery by freight carrier, free to Germany (ex works) (Optional: On-site installation by our technicians)

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Bdjdpfx Ascna Hfsfqjk Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Strokes per minute: 40–180 Power requirement: 18.5 kW Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Leto izdelave: 1994, Stanje: dober (rabljeno), številka stroja/vozila: 25286,

Stanje: rabljeno, Leto izdelave: 1992, HYDRAP tip HPSKZ 63t / 20t Tlak: 63t Dimenzije spodnje mize: 700x700 mm Dimenzije zgornje mize: 600x600 mm Bodpfsw Slnijx Afqsdk Dolžina hoda: 600 mm Svetla višina: 800 mm Blazina: 20t

Stanje: kot nova (razstavni stroj), Technical Data: Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) Bdedsfhqhdjpfx Afqok 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Bdjdpfxovn U S Ss Afqsk Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Leto izdelave: 2020, Stanje: novo, The PT-400 belt press is a machine designed for extracting apple must. This process takes place between the machine’s belt and appropriately positioned press rollers. The extracted juice is pumped directly into the pasteurizer tank. The entire unit is constructed from AISI 304 stainless steel. TECHNICAL SPECIFICATIONS: - Capacity: up to 500 kg of apples per hour - Juice yield from pressed apples: up to 75% - Installed power: 0.8 kW, 230V - Water consumption: up to 4 l/min Bdedpfx Ajfgl Hfefqek - Weight: 500 kg - Belt width: 400 mm - Adjustable belt speed - Juice tray with screen, mesh diameter: 1 mm - Juice pump included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ram surface: 700 x 350 mm Stroke: 01-120 mm Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Height: 2,900 mm Bjdpfxodvb Tfs Afqjdk

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Bodpfxjfxykps Afqodk Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Not tested, but was in use up to removal. May be suitable for spare parts or as a donor unit. Bdodpfx Aobu N N Nsfqek

Stanje: rabljeno, System: Used chamber filter press Design: Side-beam guided Filter plate size: 400x400 mm Number of chambers: 30 Cake thickness: 25 mm Bjdpfeb E A Efjx Afqjdk Filter plates: Polypropylene (PP) Filter cloths: Optionally available, tailored to the specific medium Discharge: Open Open filtration area: approx. 7.5 m² Press capacity: approx. 90 dm³ Plate pack length: approx. 1,512 mm Filtration pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10°C / max. 50°C Plate shifting: Manual Hydraulic pump: Optional Motor voltage: 380 V Control voltage: 230 V – 24 V Accessories: Optional, according to customer requirements and machine type Safety devices: Optional Special accessories: Optional, depending on configuration Upgrades: Possible in consultation, depending on machine type Special services: Refurbishment service available upon request. Each unit undergoes a service check or general overhaul before delivery. Up to 12 months warranty provided for these units. Condition: The system is immediately operational. Purchase or rental: Inspections of the systems are possible by appointment at our premises.

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off Bedpfxevnwfno Afqsdk

Stanje: rabljeno, HYDRAULISCHE PRESSE SMG PRESSKRAFT: 300 t HUBLÄNGE: 700 mm LEISTUNG: 30 kW TISCHOBENMAßE: 1500 (1600) x 1300 mm TISCHUNTENMAßE: 1500 (1600) x 1300 mm ZIEHKISSEN: 100 t HUBLÄNGE ZIEHKISSEN: 280 mm Bjdpfx Afstndu Ueqodk GEWICHT: 28.000 kg VOLLSTÄNDIG GENERALÜBERHOLT – WIE NEU ALLE KOMPONENTEN ERNEUERT (DICHTUNGEN, PUMPEN usw.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Pressure: 45 tons Installation height: 205/305 mm Table: 700 x 450 mm Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Bodpfxsgfvnns Afqedk Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control system Feed with gripper

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Bsdpfxofxykwo Afqedk Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: novo, Hydraulic Cylinder Replacement Cylinder Chamber Filter Press Bdeded Hgadepfx Afqek We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Leto izdelave: 1983, Stanje: rabljeno, Pressure: 75 tons Table: 630x620 mm Slide: 500x450 mm Installation height: 370 mm Slide adjustment: 80 mm Lateral column passage: 300 mm Stroke adjustable: 8-100 mm Bdjdpfx Ajctl Dtefqjk Strokes per minute: 7-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feeder for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with auxiliary brake

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Bdsdpfx Afedxvfheqek Travel distance: 600 mm Oil tank: 300 l

Stanje: rabljeno, System: Chamber filter press, pre-owned Application area: Chamber filter press, pilot plant Design: Side-bar guided Filter plate size: 400 x 400 mm Bsdpfsb E I T Ssx Afqjdk Number of plates: 15 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available as an option, matched to the specific medium Discharge: Open Filtration area: approx. 3.0 m² Press volume: approx. 37 dm³ Plate package length: approx. 700 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Pump technology: Optional Purchase or rental: Inspection of the systems at our facility can be arranged by appointment. Would you like to rent or purchase this unit? Please contact us—we are happy to assist you.

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Ram height: 800 mm Bjdpfedxvfpex Afqodk Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-1, System: Chamber filter press, demonstration model – as new Bodpfx Ajb Dluwefqsdk Operating hours: None Application areas: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-beam guided Filter plate size: 250 x 250 mm Number of plates: 8 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available optionally, customized to medium Discharge: Open Filter area: approx. 0.56 m² Pressing volume: approx. 7 dm³ Plate bundle length: approx. 379.2 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Product-contact parts: PP & stainless steel Dimensions (L x W x H): approx. 960 x 400 x 360 mm Weight: 350 kg (photo shows identical machine) Pump system: Optional Purchase or rental: Machine inspections available by appointment at our facility. Note: Several units available. Please pre-order due to high demand. Are you interested in renting or purchasing this machine? Please contact us – we are happy to assist.

Stanje: novo, Hydraulic cylinder replacement cylinder Chamber filter press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats. Bedpfx Afsd Hf Uwsqedk

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-2, System: Chamber Filter Press – as new, demonstration model Operating hours: None Application area: Chamber filter press, pilot plant, wine press Design: Side-bar guided Filter plate size: 390x390 mm Number of plates: 14 Filter plates: Polypropylene (PP) Cake thickness: 25 mm Filter cloths: Available optionally, tailored to the medium Filtrate discharge: Open Filter area: Approx. 2.8 m² Chamber volume: Approx. 35 dm³ Plate stack length: Approx. 391 mm Filtration pressure: Approx. 15 bar Plate shifting: Manual Frame: Steel Product-contact parts: Polypropylene (PP) + stainless steel Dimensions (LxWxH): Approx. 1695x750x630 mm Weight: 610 kg (photo shows identical system) Bdjdpfxob Dluyo Afqek Pump technology: Optional Purchase or rental: Inspection of the systems can be arranged at our facilities by appointment. Additional: Several units available. Please order in advance due to high demand.