Proizvodni Stroj nakup rabljenega (26.840)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 120 mm, širina obdelovanca (maks.): 230 mm, model krmilnika: Siemens Simatic Panel Touch, dolžina obdelovanca (maks.): 8.483 mm, TECHNICAL DETAILS Min. processing height: 6 mm Max. processing height: 120 mm Min. processing length: 370 mm Max. processing length: 8,483 mm Min. processing width: 25 mm Max. processing width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Iodpsyqx T Aofx Adkohw Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip discharge power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7243

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: nepreverjeno, številka stroja/vozila: 43, premer struženja nad prečnim suportom: 32 mm, število vreten: 6, največja hitrost vretena: 3.150 obr/min, Premer palice (maks.): 32 mm, skupna masa: 8.000 kg, TECHNIČNI PODATKI Premer struženja čez prečni suport: 32 mm Maks. hitrost vretena: 3.150 min⁻¹ Število vreten: 6 Kapaciteta okrogle palice: 32 mm Kapaciteta kvadratne palice: 22 mm Kapaciteta šesterokotne palice: 27 mm Maks. podajalna dolžina palice: 125 mm Maks. hod dolgega suportnega vozička: 100 mm Število možnih kosov: 35 Hitrost obdelave: od 1,12 s do 125 s Hitrosti vretena: od 200 min⁻¹ do 3.150 min⁻¹ Število (korakov): 49 Čas obdelave: od 0,63 s do 200 s PODATKI O STROJU Iedpfx Asyuxq Aodkohw Napetost: 50 Hz, 3x 380 V Moč: 18,5 kW Dimenzije in teža Dimenzije (D x Š x V): 3.850 x 1.390 x 2.200 mm Teža: pribl. 8.000 kg OPREMA Knoll AE 1114 visokotlačni sistem Filtrirni sistem 5- in 40-barne črpalke nastavljive posebej za procesne faze Ploščni toplotni izmenjevalnik Dvižna črpalka vgrajena v transportni sistem za odvod odrezkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: AH/335516, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 68 A, Oprema: CE označba, TEHNIČNE PODROBNOSTI 1. Enota: Razpršilna naprava Orodja priložena 2. Enota: Lepilni agregat 3. Enota: Pritrdilni valji Orodja priložena 4. Enota: Kap agregat Orodja priložena 5. Enota: Grobi rezkalni agregat Orodja priložena 6. Enota: Agregat za zaokroževanje robov Iedpfx Asyuylujdkjhw Orodja priložena 7. Enota: Radijusni vlekalni agregat Orodja priložena 9. Enota: Ploski vlekalni agregat Orodja priložena 10. Enota: Krtačni agregat Orodja priložena PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 68 A Število transportnih paketov: 2 OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, številka stroja/vozila: 20.082, Funkcionalnost: popolnoma funkcionalen, moč: 16,2 kW (22,03 KM), vhodna napetost: 400 V, skupna višina: 1.670 mm, skupna dolžina: 6.000 mm, skupna masa: 2.200 kg, TEHNIČNE PODROBNOSTI Število obdelovalnih enot: 10 1. Enota: Enota za predrezkanje Orodja so vključena 2. Enota: Lepljenje 3. Enota: Pritiskalni valji Orodja so vključena 4. Enota: Krajšalna enota Orodja so vključena 5. Enota: Iodpfx Adoyuyfzskjhw Groba rezkalna enota Orodja so vključena 6. Enota: Enota za zaobljenje robov Orodja so vključena 7. Enota: Fina rezkalna enota Orodja so vključena 8. Enota: Enota za zaobljenje robov Orodja so vključena 9. Enota: Enota za vlečenje radija Orodja so vključena 10. Enota: Sčesalna enota Orodja so vključena PODROBNOSTI STROJA Napetost: 400 V Moč: 16,2 kW Dimenzije in teža Dimenzije (D x Š x V): 6.000 x 1.415 x 1.670 mm Teža stroja: 2.200 kg OPREMA CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 42 A, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Oprema: CE označba, TEHNIČNI PODATKI Število enot: 9 1. enota: Enota za predrezkanje Orodja vključena 2. enota: Enota za lepljenje 3. enota: Pritiskalni valji Orodja vključena 4. enota: Enota za kapiranje Orodja vključena 5. enota: Enota za zaobljenje robov Orodja vključena 6. enota: Enota za vlečenje radija Orodja vključena 7. enota: Iedjyux Riepfx Adkjhw Enota za zaobljenje robov Orodja vključena 8. enota: Enota za vlečenje ploskev Orodja vključena 9. enota: Sčetkasta enota Orodja vključena PODROBNOSTI STROJA Napetost: 400 V Tok: 42 A Dimenzije (D x Š x V): 4.800 mm x 1.000 mm x 1.800 mm OPREMA Lepilni lonec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: 200.04.007.13, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), višina obdelovanca (maks.): 60 mm, skupna višina: 1.700 mm, skupna dolžina: 4.800 mm, skupna širina: 900 mm, TEHNIČNE PODROBNOSTI Min. višina obdelovanca: 8 mm Maks. višina obdelovanca: 60 mm PODROBNOSTI O STROJU Moč: 11 kW Omrežna napetost: 400 V Tok: 28 A Faze: 3 Frekvenca: 50 Hz Iedpfx Aoyux Egodkohw Dimenzije in teža Dimenzije (D x Š x V): 4.800 x 900 x 1.700 mm Teža stroja: 1.250 kg OPREMA Multifunkcijska rezkalna enota Predrezkalna enota Oblikovalska rezkalna enota Lepljenje enota

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: 10659, premer spodnjega valja: 300 mm, premer zgornjega valja: 350 mm, delovna širina: 3.000 mm, najv. debelina pločevine: 25 mm, lastna masa: 24.000 kg, TEHNIČNE PODROBNOSTI Število valjev: 4 kos. Maks. debelina pločevine: 25 mm Maks. delovna širina: 3.000 mm Iedpfx Aeyua Ezsdkehw Premer zgornjega valja: 350 mm Premer spodnjih valjev: 300 mm PODROBNOSTI STROJA Krmiljenje: konvencionalno Dimenzije in teža Dimenzije (D x Š x V): 6.300 x 2.000 x 1.800 mm Lastna teža: 24.000 kg Transportni paketi: 1 kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, številka stroja/vozila: 3115, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.000 kg, dolžina podajanja os X: 2.000 mm, dolžina tračnega lista: 4.870 mm, širina tračne žage: 32 mm, TEHNIČNE PODROBNOSTI Dolžina tračnega lista: 4.870 mm Širina tračnega lista: 32 mm Hitrost tračnega lista: 110 m/min Kapaciteta rezanja okroglih profilov: 340 mm Maks. dolžina podajanja: 2.000 mm Iedpfxoyuaz Ns Adkohw PODROBNOSTI STROJA Upravljanje: Konvencionalno Vrsta žage: Avtomatska Horizontalno/Vertikalno: Horizontalno Dimenzije in teža Dimenzije (D x Š x V): 2.000 x 1.850 x 1.800 mm Lastna teža: 2.000 kg Transportni paketi: 3

Stanje: potreben popravila (rabljeno), Leto izdelave: 2007, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 135414, merilno območje os X: 4.200 mm, merilno območje osi Y: 1.600 mm, merilno območje os Z: 2.100 mm, model krmilnika: C99, Stroj trenutno ni delujoč. Okvare so na Y-osi in Z-osi. Podrobnosti so navedene v priloženem servisnem poročilu in kalibracijskem certifikatu. TEHNIČNE PODROBNOSTI Merilno območje X: 4.200 mm Merilno območje Y: 1.600 mm Merilno območje Z: 2.100 mm Merilna plošča: 5.000 x 1.800 mm Kalibriran merilni volumen Smer X: 4.200 mm Smer Y: 1.600 mm Smer Z: 1.600 mm PODROBNOSTI O STROJU Krmiljenje: C99 Ihodpfxsytc Dqe Adksw OPREMA Merilna glava: TP20 #5M2409 Merilna programska oprema: CMM-OS 5.4.00 CAA datoteka: 03.06.2025 Kalibracijska krogla: #134983 Opomba: Merilni računalnik HP Z420 Windows 7 je po potrebi možno priložiti. Zaradi hekerskega napada je okužen z virusom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 630 mm, premer brušenja: 320 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Maks. dolžina brušenja: 630 mm Maks. premer brušenja: 320 mm PODROBNOSTI O STROJU Isdpfeyvf S Nex Adkohw Proizvajalec: TOS HOSTIVAR Model: BHU 32 Leto izdelave: 1987

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, največja debelina roba: 3 mm, hitrost pomika os X: 25 m/min, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min Ihsdjytr Hbspfx Adkew MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW FEATURES Spraying unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT Ihedpfsyttrxsx Adkow CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Ihsdjytr Rgspfx Adksw Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A25-M5-22-48408, natančnost ponavljanja: 0,004 mm, število osi: 7, Nakupna cena stroja je leta 2023 znašala 48.700 €! TEHNIČNE PODROBNOSTI Število osi: 7 Dolžina roke: 2,5 m Ponavljajoča natančnost: 0,0042 mm Volumetrična natančnost: 0,054 mm PODROBNOSTI STROJA Datum kalibracije: 03.2023 Območje obratovalne temperature: 10 °C – 40 °C Obratovalna vlažnost: 95 % (brez kondenzacije) Obratovalna napetost: 100 – 240 V AC Frekvenca: 47/63 Hz Opombe: Brez profesionalne licence za CAM2 Probe/Taster Iedpfxsyqwgbs Adkohw Podatki, informacije in tehnične specifikacije so od proizvajalca, prodajalec ne prevzema odgovornosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit Ihodpfx Ashy Tlrsdksw with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Ijdpfx Adol D Rp Eokshw Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Iodpfec S Di Rox Adkshw Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Ihsdpfx Aswiwnqsdkjw Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Ihodpfslc Ewisx Adksw Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Ihedpoiiynnofx Adkjw Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot Iodpfxefbr S Rj Adkohw End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm Iodpfxsbahd Ee Adkohw - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Ihsdpfx Adet Dx U Seksw Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Ihedpfsuxqzujx Adkow Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Iodpfx Adett Da Dskshw Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)