Professional Extreme 750 nakup rabljenega (12.953)

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support stands are not included in the scope of delivery but are available as an option upon request. Belt curve conveyors are frequently used in intralogistics for the internal transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times are easily achievable. Tapered rollers and a specially designed belt guiding system ensure maximum smoothness in operation. The shown images of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 3,900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees Support feet: optionally available Conveying speed (v m/s): adjustable both up and down via frequency inverter Bwodpfx Abek Aa T Rexew Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double ply, green, smooth Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support stands - Side guide, either single-sided or double-sided All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Enota za upravljanje Blagovna znamka: SIEMENS Model: Acramatic A21000 Bwsdpfx Aoxirk Dsbxsw Glavni pogon Število osi: 3 Pomiki Pomik po X-osi: 750 mm Pomik po Y-osi: 500 mm Pomik po Z-osi: 400 mm Ta triosni obdelovalni center Cincinnati Milacron Arrow 750 je bil izdelan leta 1996. Gre za vertikalni obdelovalni center, ki se ponaša z robustno konstrukcijo in natančnim inženiringom za zanesljivo delovanje. Če iščete visokokakovostne rezkalne zmogljivosti, razmislite o nakupu stroja Cincinnati Milacron Arrow 750 iz naše ponudbe. Za dodatne informacije nas kontaktirajte. Uporabna področja Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80-12/020-01, dolžina vretena za rezkanje: 30 mm, dolžina mize: 3.000 mm, širina mize: 380 mm, Oprema: motorna zavora, Tipi: KF 700 S Pro, Št. stroja: 8012/020-01. Leto izdelave: 2001, Napajanje: 3/400V/50Hz/10,1 A, Motor: 5,5 kW, Vreteno: 30 mm, Predhodna enota z dovodom polja, Miza: 3000x380 mm Bwjdjxmhkhjpfx Abxow

Stanje: novo, prevoženi kilometri: 60 km, moč: 87 kW (118,29 KM), vrsta goriva: električni, vrsta prenosa: samodejen, konfiguracija osi: 4x2, medosna razdalja: 4.220 mm, barva: bela, voznikova kabina: dnevna kabina, Leto izdelave: 2025, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, klimatska naprava, servovolan, sistem za imobilizacijo, tempomat, = Additional Options and Accessories = - Heated exterior mirrors - Dual passenger seat - Electric windows - Electrically adjustable exterior mirrors - Electronic Braking System (EBS) - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver’s seat - Height-adjustable steering wheel Bwedpfjwzizyex Abxsw - Air conditioning - LED daytime running lights - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Reversing camera - Side door - Immobiliser - Heated windscreen - Partition wall = Further Information = General Information Number of doors: 2 Year of manufacture: 2025 Cab type: single Technical Information Front axle: Max. axle load: 1850 kg; Steered Maximum rear axle load: 2100 kg gross vehicle weight: 3,500 kg Dimensions (L x W x H): 645 x 210 x 231 cm Functional Tail lift: D'HOLLANDIA DH-LMA.08, tailgate, 750 kg capacity Condition Overall condition: very good Technical condition: very good Optical condition: very good

Stanje: rabljeno, prevoženi kilometri: 690.000 km, moč: 160 kW (217,54 KM), prva registracija: 03/2010, skupna masa: 11.990 kg, vrsta goriva: dizel, konfiguracija osi: 2 osi, vrsta prenosa: mehanski, emisijski razred: Euro 5, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 7.450 mm, višina nakladalnega prostora: 2.250 mm, Oprema: ABS, dvižna zadnja plošča, filter saj, klimatska naprava, Carrier Tiefkühlaggregat, Diesel mit Standkühlung 750 Supra -30 °C 2000 kg Ladebordwand Klimaanlage Schaltgetriebe Kamera vorne und hinten Bjdpfx Aowk Aipobxsww Navigationssystem

Stanje: zelo dobro (rabljeno), Na prodajo visokokakovostni čelni rezkar z izmenljivimi rezalnimi ploščicami ASF-35-45-20, nameščen na vpenjalno glavo SK40. Profesionalno orodje za grobo in fino obdelavo, idealno za uporabo v CNC obdelovalnih centrih in klasičnih rezkalnih strojih. Konstrukcija glave s 45° vstopnim kotom zagotavlja odlično zmogljivost rezanja, daljšo življenjsko dobo ploščic in gladko obdelano površino materiala. • Tip: čelni rezkar z rezalnimi ploščicami • Model: ASF-35-45-20 • Vpenjanje: SK40 / DIN 69871 • Vstopni kot: 45° • Število sedežev za ploščice: pribl. 6–8 • Uporaba: rezkanje jekla, litega železa, nerjavnega jekla in drugih konstrukcijskih materialov • Stanje: rabljen – zelo dobro ohranjen in pripravljen za uporabo. Bedpjxk T Igefx Abxeww

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve conveyor is in good (used) condition and fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the delivery scope but are optionally available upon request. Belt curves are commonly used in intralogistics for the internal transport of unit loads and are indispensable components in modern distribution centers. Transnorm belt curves excel in terms of performance and reliability. Thanks to the low-tension drive system across the entire belt width, long operating times are not an issue. Tapered drums and a specially developed belt guiding system ensure the smoothest possible operation. Bwjdpok Aba Tefx Abxow The images shown were taken in the still-installed state of the conveyor system at a logistics center. Technical Data: Model Designation: Belt Curve Conveyor TS 1600-105 Conveying Length (middle radius, NL): 680 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Installation Height (BH): 210 mm Inner Radius (IR): 600 mm Curve Angle: 45° Support Legs: optionally available Conveying Speed (v m/s): 0.03–1.05 m/s Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz V380-500, kW 0.11/0.55/S1 Belt: double-layered, green, smooth, KT36 (see photos for wear) Year of Manufacture: 2001 Optional Accessories: Supports Side guides, single- or double-sided Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For customized, professional advice, please contact us directly. Reach out by phone or email—we are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Stanje: dober (rabljeno), Leto izdelave: 1979, TBT T30-4-750/1000 - Drilling diameter approx. 30 mm - Drilling depth 750 mm / extension approx. 1000 mm - Tank - Pumps Bwodpfxsd Ri H Ee Abxew - Loading device - Tailstock

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, approx. 300 cm incl. base, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE100 Bsdpsxrzg Hofx Abxsww - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, and unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally mandated hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and upright back are welded together, providing additional security and reducing assembly time, as feet do not need to be bolted to the upright back - Bracing made from angle steel – no tension rods necessary, which shortens assembly times - No slotted hole system – this means no weakening of the upright profile Price: €2,404.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on postal code. Assembly: Our trained personnel are available to assist with professional assembly and dismantling of your facility, if required. Our recommendation: Let us know your requirements... We are happy to help realize your projects from planning to ordering to installation.

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Na voljo je Stanko vodilno in vijačno stružnico z dvoosnim digitalnim prikazom Heidenhain. Razdalja med konicama: 750 mm, višina konic: 200 mm, premer struženja nad posteljo/podpornikom: 400 mm/220 mm, vretenina izvrtina: 45 mm, vretenin stožec: MK6, največje število vrtljajev: 2000 vrt/min, premer vpenjalne glave: 200 mm, število orodnih mest: 4. Dimenzije stroja (D/Š/V): cca 2300 mm/1150 mm/1550 mm, teža: cca 2100 kg, upravljanje: dvoosni digitalni prikaz Heidenhain. Vključuje strojne noge, digitalni prikaz in 2–3 jeklene nosilce. Dokumentacija priložena. Možen ogled na lokaciji. Bsdpfx Abjxn S T Ajxjww

Stanje: novo,

Stanje: dober (rabljeno), GEA Cut Master V 750 vakuumski kotlovski sekljalnik s funkcijo kuhanja CutMaster V reže, meša in emulgira vse vrste mesnih izdelkov, od grobo do zelo fino nasekljanih klobas, pod vakuumom. Primeren je tudi za široko paleto izdelkov iz perutnine, rib, slaščic ali vegetarijanskih izdelkov, topljeni sir ter mnoge osnovne izdelke v živilski industriji. Stroj ima možnost kuhanja. Vsi procesi potekajo v aparatu CutMaster, neodvisno od dodatne opreme. GEA CutMaster V omogoča izjemno hitro rezanje (do 162 m/s), kar skrajša časovno trajanje reduciranja delcev, mešanja in emulgiranja za fine in grobe klobasne izdelke. Stroji so enostavni za uporabo, imajo avtomatiziran krmilni sistem ter so preprosti za čiščenje in vzdrževanje. Bsdjxtmuljpfx Abxeww Značilnosti • Prilagodljivost • Visoka produktivnost • Odlična kakovost končnega izdelka • Visoka zanesljivost • Vakuumska izvedba Proizvajalec: GEA Model: Cut Master V 750 Leto izdelave: 1999 Kapaciteta: 750 litrov Najv. hitrost rezila: 2.860 RPM Moč: 208 kW Dimenzije stroja D x Š x V: Teža stroja:

Stanje: rabljeno, Leto izdelave: 1992, Lippert Inclined Belt Conveyor Decline Belt Conveyor Belt Conveyor GF 720+11450+850-750-600 RA2263 Bodertalnspfx Abxjww Technical Data: Conveyor length (NL): 13,020 mm (850 mm infeed + 11,450 mm incline belt + 720 mm top curve) Frame width (NB): 700 mm, 800 mm with motor Belt width (GuB): 600 mm Construction height (BH): 105 mm, 430 mm with motor Angle: 15° Support feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW gear motor Electrical data: 50 Hz V380–500, kW 0.75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: - Supports - Side guide (one-sided or double-sided) - Frequency inverter for infinitely variable speed adjustment - Length customization (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply contact us. Call us or send us an email. We are happy to support you in the planning and realization of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: dober (rabljeno), - Drilling diameter: 5–30 mm - Drilling depth: 750–900 mm Bjdpfx As Dcz Debxeww - Conversion/modification to customer specifications

Stanje: novo, Leto izdelave: 2020, Cantilever rack NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights incl. base approx. 416 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE100 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany Bjdpfoxrzf Nox Abxjww - All specified load capacities for uprights and arms are statically verified at 100% load - All racking systems are supplied in hot-dip galvanized finish. This makes them suitable for both indoor and outdoor use and unlike painted systems, they will not rust. Consistent appearance for many years - We use legally approved hot-dip galvanized bolt sets according to DIN EN 15048-1 - Extended repurchase guarantee - Upright base and rear are welded together for additional safety and reduced assembly times, as the foot does not need to be bolted separately to the upright - Bracing made from angle steel eliminates the need for adjustment with turnbuckles, shortening assembly time - No slotted hole system, so there is no weakening of the upright profile Price: €2,631.00 net + statutory VAT You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. are also available from us. Our recommendation: Let us know your requirements... We are happy to assist you with the implementation of your projects, from planning and ordering to assembly. Delivery possible at a favorable rate upon request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 1.853 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, teža obdelovanca (maks.): 300 kg, skupna višina: 2.800 mm, skupna dolžina: 4.270 mm, skupna širina: 2.350 mm, širina mize: 508 mm, dolžina mize: 686 mm, skupna masa: 7.000 kg, največja hitrost vretena: 8.100 obr/min, CNC Control: Haas Control Axes Travel X-axis mm: 762 Travel Y-axis mm: 508 Travel Z-axis mm: 508 C-axis Indexing Degrees: 360º (0.001°) B-axis Indexing Degrees: +120º to -35º (0.001°) Distance Spindle Nose - Table Surface mm: 610 Rapid Traverse m/min: 22.9 Work Table Bwjdpew Ta Iasfx Abxow Number of Pallets: 1 Pallet Dimensions mm: Ø 500 Max. Workpiece Size (Dia. x H) mm: 686 x 508 Max. Workpiece Weight kg: 300 Spindle Max. Spindle Speed rpm: 8,100 Spindle Drive Power kW: 22.4 Spindle Torque Nm: 2,514 Tool System Tool Holder: SK-40 Number of Tools in Magazine: 40 With Free Adjacent Slots mm: 127 With Occupied Adjacent Slots mm: 64 Max. Tool Length mm: 305 Max. Tool Weight kg: 5.4 Tool-to-tool Time s: 2.8 Chip-to-chip Time s: 3.6 Equipment Electronic Handwheel Chip Conveyor Rinse Gun Mist Separator Work Area Lighting CE Compliance Internal/External Air Blast RENISHAW OMP 40-2 RENISHAW OTS Optical Tool Setter Haas Test Bar Cooling Tank Capacity Liters: 208 L Machine Operating Time: Power On Hours: 10,781 Operating Time: 1,853 Basic Machine: Dimensions/Weight Length mm: 4,270 Width mm: 2,350 Height mm: 2,800 Weight kg: 7,000

Stanje: rabljeno, Širina pločevine 750 mm Dolžina pločevine 1250 mm Debelina pločevine 4 mm Površina mize 1600 x 1050 mm Število hodov 180 hodov/min Maks. premer izseka 105 mm Tlačna sila izseka 25 t Skupna potrebna moč 4,0 kW Teža stroja ca. 1,8 t Dimenzije D x Š x V 1,9 x 1,9 x 1,7 m Bwedpfxsxfb Hms Abxow Stroj za izsekavanje in štancanje - Digitalni prikaz za X in Y os - Omara za orodje z orodji

Stanje: rabljeno, Leto izdelave: 2015, Lippert Belt Conveyor Belt Band Conveyor GF 20520-750-600 RA2276 Technical Specifications: Conveyor Length (NL): 20,520 mm Frame Width (NB): 750 mm Belt Width (GuB): 600 mm Construction Height (BH): 120 mm Bedpfx Abjrupuxsxsww Support Feet: optionally available Conveying Speed (v m/s): Contact us and we will strive to accommodate your preferred conveying speed Drive: SEW geared motor Electrical Data: 50Hz V380-500, kW 0.75 S1 Drive Drum: Ø = 81 mm Belt Return Roller: Ø = 81 mm Optional Equipment: • Support Legs • Side guide, single or both sides • Frequency inverter for stepless speed adjustment • Length adjustment (longer/shorter) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional consultation, simply get in touch with us. You can contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of supply but are optionally available on request. Belt curve conveyors are frequently used in intralogistics for in-house transportation of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times present no issue. Tapered rollers and a specially developed belt guidance system ensure maximum smoothness and quiet operation. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying Length (Centerline Radius, NL): 766 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Height (BH): 210 mm Inner Radius (IR): 700 mm Conveying Angle: 45° Support legs: optionally available Bsdpfx Ask Aa T Hobxoww Conveying Speed (V m/s): 0.03–1.05 m/s Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz, 380-500V, 0.11 / 0.55 kW, S1 Belt: double-layer, green, smooth Year of Manufacture: 2001 Optionally available: Support stands Side guides, single or double-sided All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For tailored, expert advice, please do not hesitate to contact us. Reach out to us by phone or email. We look forward to assisting you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2015, Lippert Belt Conveyor Belt Conveyor GF 15320-750-600 RA2126 Technical Data: Conveying length (NL): 15,320 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Construction height (BH): 120 mm Support legs: optionally available Conveying speed (v m/s): Please contact us, and we will try to meet your preferred conveying speed Drive: SEW geared motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0.75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optional accessories available: - Support legs - Side guide, single-sided and double-sided - Frequency inverter for stepless speed adjustment - Adjustable length (longer/shorter) Prices plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Bedpfxorudb Aj Abxoww For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We will be happy to support you in planning and implementing your projects. We look forward to hearing from you. Best regards Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Lippert Belt Conveyor, Conveyor Belt GF 15980-750-600 RA2134 Technical data: Conveying length (NL): 15,980 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Construction height (BH): 120 mm Support legs: optionally available Conveying speed (v m/s): Please contact us and we will try to accommodate your preferred conveying speed Drive: SEW geared motor, R37 DRE80M4/TH Electrical data: 50 Hz V380-500, kW 0.75 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optionally available: - Supports - Single-sided and double-sided side guides - Frequency inverter for stepless speed adjustment - Adjusting the length (longer/shorter) Bsdporudb Rofx Abxoww Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, please feel free to contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Lippert Belt Conveyor, Belt Conveyor GF 1465-750-600 RA2130 Technical Data: Conveyor length (NL): 1465 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Overall height (BH): 120 mm Support legs: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R17 DR63L4/TH Electrical data: 50Hz V380-500, kW 0.25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optional extras available: - Supports - Side guides (single-sided and double-sided) - Frequency inverter for stepless speed adjustment - Customizable length (longer/shorter) Bedpfx Abjrudb Ujxoww Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. You can contact us by phone or e-mail. We are happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Best regards The team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Lippert Belt Conveyor Gurtband Conveyor GF 28100-750-600 RA2142 Technical Data: Conveyor length (NL): 28,100 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Construction height (BH): 120 mm Support legs: available as an option Conveying speed (v m/s): Contact us and we will do our best to meet your preferred conveying speed Drive: SEW geared motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0.66/1.3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optional equipment: Supports Side guides on one or both sides Frequency inverter for stepless speed adjustment Length adjustment (longer/shorter) Prices are net plus VAT ex-warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Bsdpferupu Rox Abxoww For individual, expert advice, simply get in touch with us. Please contact us by phone or e-mail. We will be happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Stanje: rabljeno, Lippert Belt Conveyor GF 19100-750-600 RA2247 Boderknt Depfx Abxoww Technical Specifications: - Conveyor length (NL): 19,100 mm - Frame width (NB): 750 mm - Belt width (GuB): 600 mm - Construction height (BH): 120 mm - Support legs: available as option - Conveyor speed (v m/s): Please contact us – we will do our best to meet your preferred conveyor speed - Drive unit: SEW gear motor - Electrical data: 50Hz, 380-500V, 0.75 kW S1 - Drive drum: Ø = 81 mm - Belt return roller: Ø = 81 mm Options available: - Support legs - Side guides, single-sided or double-sided - Frequency inverter for stepless speed adjustment - Length modification (longer/shorter) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, please do not hesitate to contact us. Simply call or email us. We are happy to support you in the planning and realization of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Stanje: rabljeno, Transporteur à bande Lippert GF 7920-750-600 RA2253 Données techniques : Longueur de transport (NL) : 7920 mm Largeur de châssis (NB) : env. 750 mm Largeur de bande (GuB) : 600 mm Hauteur de construction (BH) : 105 mm Pieds de support disponibles en option Vitesse de convoyage (v m/s) : veuillez nous contacter Bodpfx Aerrxcvobxsww Entraînement : motoréducteur SEW Données électriques : 50Hz V380-500, kW 0,55 / S1 Rouleau de retour (UR) : Ø = 81 mm Tambour d’entraînement (AT) : Ø = 81 mm Disponible en option : Supports Guides latéraux Variateur de fréquence pour réglage en continu de la vitesse Prix nets hors TVA, départ entrepôt central Dr. Sonntag GmbH & Co. KG, 97076 Wurtzbourg Pour un conseil individuel et professionnel, contactez-nous simplement. Par téléphone ou par e-mail, nous vous aidons volontiers pour la planification et la réalisation de vos projets. Nous attendons votre retour avec plaisir. Cordialement, L'équipe de Dr. Sonntag GmbH & Co. KG Votre spécialiste et interlocuteur en intralogistique.