Plošče Iz Vezanega Lesa nakup rabljenega (20.520)

Stanje: rabljeno, Technical details: Nljdpfju N D Rdjx Ah Usb Plate length: 2000 mm Plate width: 1500 mm Plate height: 820 mm Plate thickness: 185 mm Machine weight approx.: approx. 2.1 / 2.2 t per plate Transport dimensions LxWxH: approx. 2.0 x 1.5 m / per plate A total of 6 of these clamping plates are available for sale. (Price per piece) Material: cast steel/profile cast T-slots according to DIN 650: a = 43 mm; h = 105 mm; b = 76 mm; c = 50 mm; center distance 375 mm 4x through holes Ø 90 mm 10x mounting holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for plate no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for plate no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm

Stanje: rabljeno, Technical details: Plate length: 2600 mm Plate width: 380 mm Plate height: 115 mm Plate thickness: 115 mm Machine weight approx.: approx. 0.4 t / per plate Transport dimensions LxWxH: approx. 2.6 x 0.38 x 0.2 m / per plate A total of 3 plates are offered for sale together. (Price per plate) These can be connected to form a plate field. Material: Steel, machined surface T-slot longitudinal quantity: 2, a=36mm, h=48mm, b=60mm, c=24mm Nledpfsval Emox Ah Usb Pitch: 160mm Base mounting, quantity: 4, size D=32mm x 45mm, counterbore D70x65mm End face bore, quantity: 1 per end face, M20, centered position

Stanje: rabljeno, Technical Details: Plate length: 2990 mm Plate width: 1990 mm Nodpfx Aeval H Reh Uolb Plate height: 190 mm Plate thickness: 190 mm Machine weight approx.: approx. 7.0 t / per plate Transport dimensions LxWxH: approx. 3.0 x 2.0 x 0.2 m / per plate 2 plates available for sale. Material: Cast steel Surface: milled/finish-machined T-slots according to DIN 650: 8 large T-slots: a=36; h=70; b=55; c=25.5 mm 7 small T-slots: a=28; h=38; b=47; c=21 mm Centres distance: 123 mm 9 through holes Ø 80 mm 6 through holes Ø 33 mm

Stanje: rabljeno, Tehnični podatki: Dolžina plošče: 4600 mm Širina plošče: 1450 mm Višina plošče: 300 mm Debelina plošče: 300 mm Približna teža stroja: 7,2 t / plošča 2 vpenjalni plošči (cena za ploščo) Material: jekleni liv Obdelana površina T-utori po DIN 650: a=40; h=66; b=71; c=29 mm Razmak med utori: 300 mm 6 prebojev Ø 41,0 mm Nedpfewtctgjx Ah Uslb

Stanje: rabljeno, Tehnične podrobnosti: Nledswnfu Nepfx Ah Usb Dolžina plošče: 2003 mm Širina plošče: 1005 mm Višina plošče: 180 mm Transportne dimenzije D x Š x V: 2,02 x 1,05 x 0,18 m Na voljo 3 plošče (cena na kos) Litoželezo Delovna površina mize: 2020 mm x 995 mm Vzdolžni utor: število 4 Dimenzije: a=38, h=60, b=59, c=24 mm Razmak med središči: 250 mm Pritrdilna odprtina: število 4 Velikost D=30 mm

Stanje: rabljeno, Technical details: Nodpfx Ahsval Hds Ujlb Plate length: 4500 mm Plate width: 1250 mm Plate height: 250 mm Plate thickness: 250 mm Machine weight approx.: 3.6 t / per plate Transport dimensions (LxWxH): approx. 4.5 x 1.3 x 0.3 m / per plate 2 plates available for sale. Material: Cast steel T-slots according to DIN 650 a = 21 mm; h = 40 mm; b = 39.5 mm; c = 16 mm; Center distance T-slot to T-slot = 250 mm

Stanje: rabljeno, Technical details: Nlodpfxsu N Drho Ah Uob Plate length: 4015 mm Plate width: 2000 mm Plate height: 310 mm Approximate machine weight: 5800 kg Cast steel plate, available for sale. T-slots according to DIN 650 a=25; h=62; b=51; c=25 mm T-slot center distance = 250 mm with countersunk holes Ø 33 mm and Ø 40 mm

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – structural steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Extraction connection: Ø 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made of stress-relieved steel-welded construction for a stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta starting of main motors * Analog ammeters for each group * Digital display for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel frame, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed by frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers on front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller, anti-oil and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinder for automatic positioning and lift-off in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic brake in emergency. Pneumatic tensioning system for sanding belt. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and time. Contact roller positioning accuracy mm +/- 0.02 Contact roller positioning speed m/s 10 Contact roller diameter mm 125 Rubber roller hardness Shore Njdpowiqukjfx Ah Ujlb 55 Sanding belt speed m/s 3 - 18 Motor power kW 7.5 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Oscillating lateral movement of the entire group. Quick-change system for brushes. Brush diameter mm 115 Number of brushes pcs 8 Oscillation stroke mm 15 Rotational motor power kW 2.2 Speed rpm 1,000 Oscillation motor power kW 0.37 Brush linear speed m/s 10.0 Optional equipment: B group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,150.00 with 0.3 mm wire brush €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW €740.00 X GROUP – CUP BRUSHES Motor with variable speed 5.5 kW 350/1,100 included OPTIONS: Return to Sender System (machined part output to the front) €1,770.00 Conveyor belt with vacuum system – 3.0 kW €5,150.00

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), premer žaginega lista: 303 mm, vrtljajska hitrost (min.): 4.800 obr/min, skupna dolžina: 6.626 mm, skupna višina: 3.055 mm, Oprema: CE označba, Saw Frame • Manufacturing of the machine precision parts to within 1/100 mm • Solid, self-supporting, rigidly welded, torsion-resistant saw frame • TRK2 automatically retracting aluminium slat support with plastic pads • TRK1 automatically retracting wooden support wall • 17-fold roller support with 3 brake pedals (Type 6224) • 5.15 m long, segmented central support at optimum working height (Type 6224), with aluminium locating grids • Aluminium small parts support (1 pair), can be used individually (only on model TRK2 without KTA-wood) Saw Unit • Effortless operation thanks to fully balanced saw unit • Robust mounting of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 hp) • Carbide-tipped circular saw blade 300/30 mm • Program cam switch for recurring dimensions • Integrated stop for horizontal strip cuts (500 mm) • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Saw Beam • Sturdy, durable saw beam steel structure Nlodpfxsy Tt Ube Ah Ujb Installation • Wall-mounted or free-standing installation possible Comfort Package INCLUDED MLW Pneumatic clamping (motor carriage) DMS-Y (Digital measuring system Y-axis) incl. fine adjustment DMS-X (Digital measuring system X-axis) Pneumatically braked support rollers Laser-assisted display of horizontal cutting

Stanje: rabljeno, Leto izdelave: 2001, Použitý stroj Rok výroby: 2001 Oprema in tehnični podatki: - Dolžina reza: 4300 mm - Višina reza vertikalno: 2150 mm, horizontalno: 2100 mm - Največja globina reza: 60 mm - Premer žaginega lista: 250 mm; pritrdilna odprtina: 30 mm - Motor: 4 kW - Obrati: 5100 obr/min - Nosilna površina z valji za material Nledpfxjxvnpco Ah Uob - Fiksni nosilni elementi za varno stabilnost obdelovancev - Srednja nosilna točka: stabilni nosilni elementi v delovni višini, posamezno ročno zložljivi - Odčitavanje mer: - horizontalni rezi prek lestvice - horizontalni rezi prek dolžinskega prislona 50–500 mm - vertikalni rezi prek prislona 0–1300 mm - Priklop na zračni tlak za pnevmatsko pomični letveni ležišče (potreben tlak: 6 bar) - Predrezovalni sistem: z dvojnim rezom glavnega žaginega lista; globina potopa žaginega lista je omejena s preprostim premikom prislona, tako da žagin list v enakomernem gibanju predreza obdelovanec Razpoložljivost: kratkoročno Lokacija skladišča: Röllbach

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Nedpfx Ahov Sqrpo Uelb Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller Nlsdpjx Af Rdofx Ah Uob - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput Nledpfx Ahjdwktke Uob - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet Nodped Dgw Ujfx Ah Uslb - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Nsdpod E R D Sofx Ah Uelb Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Leto izdelave: 1998, stanje: rabljeno, Temperature: 200-210 °C Conveyor Speed: 1000 mm/min Max. Workpiece Length: 200 mm Total Power Requirement: 50 kW Machine Weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD and/or mixed technology) and for curing SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - Equipped with software functions - Can be integrated into a production line Further technical specifications: - Shielding gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical supply: 12 kW Nsdpfxeu Rwaus Ah Ujlb - Space requirement: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with reloading head and discharge belt for accommodating, for example, printed circuit boards. - Machine is CE98 certified System suitable as a donor for spare parts or for conversion/expansion. Sale as is. Priced for quick sale.

Stanje: rabljeno, Leto izdelave: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Fully installed dryer with carriage, high-performance radial fan, electric heating - Supply and exhaust air flaps, safety thermostat, spray device Nlsdpfx Ahjy R Ha So Ueb - Swing lift door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminium - The stainless steel floors are permanently resistant to aggressive wood components such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows for steaming in the system - Stack dimensions: 530 x 105 x 115 cm - Stack volume: 6.4 m³ - External dimensions: 690 x 176 x 140 cm - Heating: 12 kW - Motor: 1.1 kW / 400 V - With MP 902 controller Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 1.019 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 93.437.268, delovna širina: 1.350 mm, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 100 mm, najv. debelina jeklene pločevine: 100 mm, maks. debelina aluminijaste pločevine: 100 mm, najv. debelina bakrene pločevine: 100 mm, maks. debelina medeninaste pločevine: 100 mm, skupna dolžina: 7.085 mm, skupna širina: 2.020 mm, skupna višina: 2.295 mm, skupna masa: 4.800 kg, delovna višina: 850 mm, vhodna napetost: 400 V, priključek za stisnjen zrak: 6 letvica, vhodna frekvenca: 50 Hz, moč: 55 kW (74,78 KM), višina mize: 850 mm, širina brušenja: 1.350 mm, vhodni tok: 100 A, Oprema: dokumentacija / priročnik, À vendre : une ponceuse humide fiable Weber NLC 1350 de l'année 2008. Cette machine est spécialement conçue pour la finition de surface de haute qualité des pièces découpées au laser, poinçonnées ou grignotées. Grâce à la technologie de ponçage humide, une surchauffe du matériau est évitée, garantissant des résultats constants avec une grande précision. Points forts & équipements : Précision : Hauteur de travail constante et construction modulaire robuste. Polyvalence : adaptée pour l’ébavurage, le rayonnage des arêtes et le décapage des tôles fines ou épaisses. Sécurité : Nsdpfx Aoy Ar A Noh Uelb Le ponçage humide retient la poussière d’abrasion et augmente la sécurité du processus de production. Commande : Interface opérateur intuitive pour des temps de réglage rapides. Pour toute question ou pour plus d’informations, n’hésitez pas à nous écrire ou à nous appeler.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, Dolžina reza 5300 Nedpoy S T S Defx Ah Uolb Višina reza 2200/2100 mm Skupna dolžina 6300 mm Skupna višina 2860 mm

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Dimenzije mize: 1400 x 1000 mm Miza se vrti od 0 do 360 stopinj Vreteno: ISO40 Nagibno vreteno Minimalna hitrost vrtenja vretena: 90 1/min Maksimalna hitrost vrtenja vretena: 2880 1/min Višina stroja: 3260 mm Dolžina stroja: 2650 mm Širina stroja: 2600 mm Teža stroja: 5100 kg Dodatna oprema, oprema: - Vgrajena rotacijska miza - Hitri pomiki Nodpfx Ahoy Iwf Hs Uolb - Motorizirana nastavitev višine - Strojna svetilka Stroj je v zelo dobrem stanju.

Stanje: dober (rabljeno), Leto izdelave: 2012, Pogonski stroj počasnega teka s potisnim dnom. Širina rotorja: 830 mm. Velik rotor z 38 noži. Velikost nožev: 40 x 40 mm. Motor 22 kW. Premer sita: 25 mm. Njdpfx Ahoy T Ef Ee Ujlb

Stanje: rabljeno, Leto izdelave: 1994, Dolžina reza 5300 mm, višina reza 2200 mm, višina reza 80 mm, ročni pomik, merilni sistem skala, samostoječa podpora, nazivni tok 21 A. Skladišče: Nattheim. Nodpfoytrhrsx Ah Uolb

Stanje: rabljeno, Leto izdelave: 2001, Odpirač za zamaške Proizvajalec: Fa. Rink Model: KM 670/2K Leto izdelave: 2001 Stroj (dodatek): odpiranje zamaškov v intervalih Moč: 6,5 kW Tok: 10 A Napetost: 230/400 V Frekvenca: 50 Hz Dolžina: 2800 mm Nlsdpfew Ta D Usx Ah Usb Širina: 1000 mm Višina: 2300 mm Formati: 0,33 l steklenice, 0,35 l steklenice, 0,5 l steklenice, modularno ohišje Razporeditev plasti: 2x20 steklenic, 2x24 steklenic Smer delovanja: z leve proti desni Upravljanje / krmiljenje: Simatic S5 Pozicija: samostoječ Osnovna konstrukcija: pravokotna okvirna konstrukcija, barvana, na polkrožnih nogah Oprema: transport zabojev, formatni seti / glave za odpiranje zamaškov za 2x20 in 2x24 steklenic, ohišje z vrati, zaščitna mreža, električna omara z upravljalno ploščo, različni rezervni deli.

Stanje: rabljeno, Leto izdelave: 1994, Troslojni sistem za degazaciju vode za odstranjevanje plinov iz vode in impregnacijo s CO2. Surova voda vstopi skozi injektorsko šobo v prvi rezervoar za degazacijo. Zaradi visoke hitrosti toka se kisik in dušik izločita iz vodnega curka in uhajata na vrhu rezervoarja. Ta postopek se ponovi v drugem rezervoarju za degazacijo. V tretjem rezervoarju (rezervoar za impregnacijo) se voda po vstopu skozi injektorsko šobo meša z CO2 pod tlakom za impregnacijo v zgornjem delu rezervoarja. Stroj (dodatek): večstopenjska hladna degazacija z impregnacijo Nedpfxexzqt Ij Ah Uslb Osnovna konstrukcija: na okvirju iz nerjavnega jekla Oprema: 3 rezervoarji (vsak z manometrom); 3 centrifugalne črpalke; električna omarica z upravljalno ploščo; cevovodi z raznimi armaturami.

Leto izdelave: 1975, stanje: rabljeno, Kettle filter system with horizontally stacked filter elements. At the end of the filtration process, the diatomaceous earth is discharged centrifugally. Nljdpfevcqpcox Ah Ueb Machine (additional description): Horizontal screen filter Capacity: 140 hl/h Tank volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel 1.4541 (vessel) Base construction: Mounted on feet Equipment: Diatomaceous earth dosing vessel with dosing pumps; pumps; fittings, instrumentation