Planer 4-Strani nakup rabljenega (63.566)

Stanje: dober (rabljeno), Included in delivery: 1,044x stackable transport containers, used Manufacturer: SSI Schäfer Type: 14/6-4 Version: Double-sided recessed grip Colour: Blue Material: Polypropylene External dimensions (LxWxH): 210x150x123 mm Internal dimensions (LxW): 190x123 mm Usable height when stacked: 110 mm Capacity: 2.50 litres Stackable: Yes Weight per piece: 0.266 kg Pgjdpfx Aopl Tf Ejdyjg Weight per pallet: approx. 95.00 kg Total weight for 1,044 pcs.: approx. 380.00 kg Note: These are used stackable transport containers. Scratches, soiling and colour deviations may be present. Application: The stackable transport containers are suitable for storing tools, fasteners and other small parts. General information about the article: This item is offered for collection only. If transport or shipping is required, this can be arranged at additional cost, which can be quoted separately depending on destination and order size.

Stanje: novo, We are offering you a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 - 4 weeks Pgsdshq Tqdepfx Adyog Technical data for the workbench: Manufacturer: Metal Sistem Model: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Scope of delivery includes: 02x Workbench frames, new Frame color: fully galvanized Frame type: TS4 Incl. cross and diagonal braces, base plates The frames are pre-assembled (screwed truss construction) 888 mm high 700 mm deep 02x Workbench beams, new Beam type: TS Profile dim.: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x Angle set, new for fastening the worktop 04x Safety hooks, new Material color: fully galvanized

Stanje: dober (rabljeno), Tehnični podatki o paletnem regalnem stojalu: Regalni sistem: Dexion Pedpfx Adjxxq Tvoyogg Tip: S 4 V obsegu dobave je vključeno: 01x paletno regalno stojalo, rabljeno Barva materiala: sendzimir pocinkano Tip: H Dimenzije profila: 81,7 x 77,21 x 2,5 mm Vključno s prečnimi in diagonalnimi povezavami, Talne plošče Stojala so predmontirana (vijačen okvir) Višina: 11.050 mm Globina: 1.100 mm Vaše kontaktne osebe pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Za morebitno dodatno transport ali pošiljanje tega artikla nastanejo dodatni stroški, ki jih je možno individualno preveriti glede na kraj dostave in obseg dobave.

Stanje: rabljeno, prevoženi kilometri: 1.600.000 km, moč: 300 kW (407,89 KM), prva registracija: 05/2007, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 5, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.000 mm, Oprema: ABS, klimatska naprava, parkirni grelec, DAF XF 105.410 Platforma s ceradom, retardér, 2 XL rezervoara, EU5 Za upite: 1025808 * Opšte stanje: dobro * Snaga: 300 kW / 410 KS * Menjač: automatski * Retarder * ABS * EBS * Blokada diferencijala na zadnjoj osovini * Pomoćno grejanje (standheizung) * Pomoćna klima (standklimaanlage) * Gornja polica iznad vozača/sredina/suvozača * Vazdušno amortizovano komforno sedište za vozača * Električni podizači prozora (kod vozača) * 2x ležaj za spavanje * Električno grejani i podesivi retrovizori * Klima uređaj * CD radio/AUX/USB/Bluetooth * XL rezervoar sa leve strane * XL rezervoar sa desne strane Nadgradnja: platforma s ceradom Dimenzije (tovarni prostor/površina za utovar) Dužina tovarnog prostora: 6.500 mm Širina tovarnog prostora: 2.500 mm Visina tovarnog prostora: 3.000 mm Gume: Prednja osovina: 295/60 R 22.5, lisnate opruge, 30% Zadnja osovina: 295/60 R 22.5, vazdušno osovinjene, 30% ----Cena: 6.900,- EUR + 19% PDV Za dodatna pitanja možete nas kontaktirati na sledeće brojeve telefona: * Govorimo: nemački, engleski, francuski, poljski i ????? Zadržavamo pravo na greške u pisanju, tehničke greške i međuvremenu prodaju. Pedpfx Asxrwx Esdyogg

Stanje: novo, Hardfacing electrode Brand: Duramit W4 Material: 1.2567 Diameter: 6 mm Pgodpfx Adehhyitjyog Length: 450 mm 40 pieces per package 6 packages available €95 per package

Stanje: novo, Hardfacing electrode Brand: Duramit W4 Material grade: 1.2567 Diameter: 3.25 mm Length: 350 mm 120 pieces per package 2 packages available 95 euros per package Podpfxehhyize Adyegg

Stanje: rabljeno, Premer različen Količina: 44x Pgjdjxyzx Eepfx Adyjg Vpenjanje: SK 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Five-head four-sided planer Steton. Five-head four-sided planer Steton. The machine has been serviced and does not require any additional investment. Technical specifications: - Maximum working width: 23 cm - Maximum working height: 13 cm - Spindle diameter: 40 mm - 1 - Bottom horizontal: 23 cm - 2 - Right vertical: 13 cm - 3 - Left vertical: 13 cm - 4 - Top horizontal: 23 cm - 5 - Universal soundproof cabin, 360 degrees Podei Apuhopfx Adyegg - Electric thickness adjustment - Two feed speeds

Stanje: zelo dobro (rabljeno), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was mounted on a VTC 300, now for sale due to upgrade to a new 5-axis machine. Psdop U Umkjpfx Adyegg

Stanje: rabljeno, Diese Anzeige bezieht sich auf den LABCOLD RLDF1520 Klimaklasse 4 Kühlschrank. Das Gerät ist voll funktionsfähig und sofort einsatzbereit. Der LABCOLD RLDF1520 ist ein apotheken-/impfstoffgeeigneter Kühlschrank, entwickelt für die Lagerung von temperaturempfindlichen Arzneimitteln, Impfstoffen oder biologischen Materialien. Hauptmerkmale und technische Daten: Eigenschaft Spezifikation / Detail Kapazität: ca. 430 Liter Podpoxhdthjfx Adyjgg Außenmaße (H × B × T): 1.860 mm × 600 mm × 700 mm Temperaturbereich: +2 °C bis +8 °C (Nennbetrieb ca. +5 °C) Steuerung/Überwachung: „IntelliCold™“-Regler, 24/7 Temperaturaufzeichnung, Alarme (Hoch-/Tieftemperatur, Tür offen, Stromausfall) Isolierung/Konstruktion: Gehäuse aus emailliertem Stahl, Innenraum aus korrosionsbeständigem, lackiertem Aluminium; Umluftkühlung mit Ventilator; automatische Abtauung im Stillstand Türtyp: Geschlossene Tür (keine Glastür) Weitere Merkmale: Türschloss mit Schlüsseln, Zugang für Messsonde, Kontakte für Fernalarm, Datenspeicherung (13 Monate) Stromverbrauch / Energiebedarf: ca. 5,52 kWh/24h (Wert bezogen auf ein vergleichbares 440-Liter-Modell) Fazit: Es handelt sich um ein robustes, normgerechtes Kältegerät, konzipiert für den Einsatz in der Kühlkette (Lagerung von Arzneimitteln, Impfstoffen, Biologika), nicht für den allgemeinen Haushalts- oder Lebensmittelbereich.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) Pgodjd Tbbdspfx Adysg - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Psdofdkb Tjpfx Adysgg Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice Podpod Tqalofx Adyegg - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: Psdpfx Adjguk A Heyogg - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level. Pedpfx Aefdkb Usdysgg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Pgodeguk Dkepfx Adysg Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. Podpfx Ajfdkbhodyegg When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) Psdpfoguk Dvjx Adyogg - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, višina police: 3.500 mm, dolžina opore: 2.700 mm, dolžina police: 8.500 mm, višina okvirja: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment Pgodpfsv Ukz Aox Adysg - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: rabljeno, Leto izdelave: 2016, Used machine Cross-sanding automatic machine Year of manufacture: 2016 Product Advantages Beneath perfectly painted, stained, or oiled wood surfaces, there is always a perfectly sanded area! Felder sanding machines are distinguished by solid construction, state-of-the-art machine technology, and maximum productivity. Key highlights at a glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touchscreen control for work processes - The Felder operating concept ensures maximum process and work safety Your benefits at a glance: Time savings - Motorized adjustment of the contact roller in 1/100 mm increments from the control panel - Innovative unit arrangement for pre-sanding and fine sanding of veneered workpieces - Brush units at the machine outfeed - Lacquer sanding as optional additional equipment Convenience - Fixed feed table height (upper part of the machine is adjusted) - Touchscreen control with clear image display and program memory - Machine data acquisition for sanding belt wear and more - Tool-free handling when changing sanding belts - Large foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Infinitely variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit incl. chevron glide belt to compensate for oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard features Control system: finish 1350 classic Control unit with 7" touch color display, 100 program storage spaces, maintenance interval notifications Plain-text error messages Amperemeter for load monitoring Feed table - Fixed infeed height – stationary table, 900 mm Podpow I Uv Ujfx Adyjgg - Electric height adjustment of units including fine adjustment from the control panel - Infinitely variable feed speed from 2.8–20 m/min adjustable by inverter from the control panel - Hand guard and workpiece overthickness protection - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless honeycomb structured belt conveyor - Automatic feed belt centering Cross sanding unit finish 1350C high gloss - Segmented, electronically-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Chevron glide belt between sanding pads, sanding belt for homogeneous sanding without oscillation marks - Variable pressure regulation on the control side - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety - 1 motor with 7.5 kW (10 HP) - Star-delta starting - Cleaning blower with timer control - Cutting speed 12 m/s - Sanding belt 140 x 4560 mm Combined superfinish unit 1350C: - Rubber, grooved contact roller with 85–90° Shore hardness and 142 mm diameter - Electromotorically positioned grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure regulation on the control side - Chevron glide belt between sanding pad and sanding belt for homogeneous finish without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100–1100 kW Pgjdewgyrtspfx Adyjg - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Design: ZM - Year of manufacture: 2013

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, WEISHAUPT WM-G10/A-4; S plinsko napeljavo - Moč: 110-1250 kW Pedpjwgym Dsfx Adyegg - Leto izdelave: 2011 - Izvedba: ZM

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Cena je za vse skupaj. Idealno za nov začetek v sitotisku Umetniški studio Umetniki Set vsebuje: 1. SITOTISKARSKI KARUSEL tip X, 4 MIZE, POPOLNOMA NASTAVLJIV 2. SUŠILEC: TROFAZNA NAPAJANJA Pedexwnw Aepfx Adyegg 3. FLASH AVTOMAT: TROFAZNA NAPAJANJA VSE JE NOVO, SAMO ODPAKIRANO.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 5.700 mm, širina tračne žage: 41 mm, skupna višina: 1.720 mm, skupna dolžina: 2.600 mm, skupna širina: 2.400 mm, dolžina podajanja os X: 600 mm, Obseg rezanja okroglega jekla pri 90°: 400 mm, največja širina rezanja: 400 mm, višina mize: 700 mm, skupna masa: 2.200 kg, največja višina reza: 400 mm, Fully hydraulic high-performance band saw, built with extra heavy-duty construction, featuring a horizontally parallel-moving saw band for cutting profiles, pipes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for the use of both bimetal and carbide tipped saw bands. Saw unit constructed in solid polymer concrete for maximum smooth operation and extended blade life. The saw unit is guided by two vertical square columns (dual column guidance) with hardened and ground guide rails. Pjdpfx Aeupvrxsdysgg Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping by two horizontal frame clamping vices. Material feed via an integrated, non-driven roller conveyor with twelve transport rollers, allowing even short remnants to be transported easily. Year of construction: 2004 Cutting capacity round: 400 mm Cutting capacity square: 400x400 mm Automatic feed length: 600 mm Multiple automatic feed: 99999 mm Variable cutting speed: 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material table height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant piece length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg Additional features: - Coolant system - Full enclosure - CNC control - Idle monitoring - Saw band tracking control - Side guide rollers - Height measurement system - Light barrier