Palete Postaja nakup rabljenega (1.452)

Stanje: zelo dobro (rabljeno), Epson G10-854SR Robot Assembly Station Dispensing Station Blsdpjibx S Nofx Ag Tsd The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area Heatsink + Front Wall Bracket, and 3.3 Assembly Area Front. (KK = Heatsink, SW = Front Wall Bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCB enters the dispensing area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt and fixed in place. - Next, the x-y-z handling system moves the dispensing head to the specified location and starts the dispensing process. - After successful dispensing, the handling system moves into the park position and the WT is set back onto the belt. - The carrier is then conveyed to the Assembly Area Heatsink + Front Wall Bracket (provided there is no WT in the placement position). St.3.2: Assembly Area Heatsink + Front Wall Bracket - A WT moves from the dispensing area into the Assembly Area Heatsink + Front Wall Bracket via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place; at the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, the heatsink tray and front wall tray are positioned. - A stack of 12 heatsink trays and a stack of 12 front wall bracket trays are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety interlocks are opened and the loaded tray stacks move into the gripping position of each stacker. - The safety interlocks close again. - The corresponding grippers pick up the respective tray. - The tray is separated and transported upwards with the stacker z-axis to above the actual pick-up height. - To center and stabilize the tray, a centering support is pushed and positioned underneath each tray by the x-handling system. - With the stacker z-axis, each tray is set onto its corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heatsink (KK) is gripped from the tray and placed in an intermediate alignment position (to compensate for pickup inaccuracies and ensure a repeatable gripping position for assembly). - The heatsink is scanned, picked up again, and if the scanner result is OK, it is assembled onto the WT. - If not OK, the heatsink is placed in an NOK box. - The SCARA robot multi-gripper then picks up the front wall bracket (SW) from the tray and places it in the alignment position. - The front wall bracket is picked up again and assembled onto the WT. - Proceed to Assembly Area Front. Technical Data Model: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Allowable moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Ø outer: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP Protection class: IP20 Power and signal cables: 3m Financing through our bank is also possible. Complete offer at komplett-konzept.leasingo.de

Stanje: dober (rabljeno), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing these units. The assembly station is enclosed by a protective housing. The service doors are equipped with monitored locking switches (interlocks). During automatic operation, the doors are locked and can only be opened during an automatic stop or in manual mode after pressing the 'Door' button on the control panel. Automatic operation cannot be started when a door is open. Functional Sequence The station is loaded via the transfer conveyor with the pre-assembled module. Bedpfxeibichj Ag Teld Below is a description of the steps performed in the automatic station during the processing of one workpiece carrier (WT). In normal operation, all 3 stations run in parallel. - Positioning the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), cross-check with the database - Verifying correct latching of the FFC (flexible flat cable) in the connector - Raising the carrier and lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection hood and contacting, moving the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and keys - Function test of the CD eject button - Lowering the WT onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen and can be rectified if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT is checked again in the station. If repair is not possible (e.g., screwdriving error), the WT is marked as NIO (not OK) in the control system and is no longer processed. Manual NIO marking and discharge is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de Additional new and used assembly stations—find them in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Rehsler TAE EVO 602 Air-Cooled Chiller Unit The Rehsler TAE EVO 602 is a compact, air-cooled chiller unit manufactured by M.T.A. S.p.A., designed for outdoor installation and equipped with an integrated buffer tank and pump. These units are intended as "fully equipped" solutions, enabling quick installation and commissioning, as all necessary cooling components are housed within a single enclosure. Main features: Air cooling: Suitable for outdoor installation. Compact solution: Includes an integrated buffer tank and circulation pump, allowing for plug-and-play installation. Versatile application: Designed for various cooling processes across a wide range of applications. Quick installation: Facilitated by the integration of internal components and the potential for fast assembly. Manufacturer: Rehsler Kühlsysteme Model: TAE EVO 602 Voltage: 400 V Rated power: 61 kW Current consumption: 104 A Protection class: IP54 Permissible operating pressure: 6 bar Tank capacity: 500 liters Refrigerant: R407C / 2 x 14.5 kg Condenser: Air-cooled Blodpoxgqzpsfx Ag Ted Rated compressor output: 4 kW Pump P3 Water flow rate: 22.3/48 m³/h Power: 4 kW Centrifugal fan Total air flow: 420 Pa Total air flow: 40,000 m³/h Screw fan Total air flow: 42,000 m³/h Dimensions: Length (mm) 3294, Width (mm) 1255, Height (mm) 2140 Weight: 1,345 kg Financing through our partner bank is available. complett-konzept.leasingo.de Further items – new and used – are available in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Foam dosing station with foam mixer and applicator The system operates similarly to the SUPRA MIX concept. Multiple chemicals are metered and mixed in a controlled ratio with water and air. Recipes are stored in the controller and can be changed during operation. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products plus water • 5 dosing pumps • One direct inlet for the mixture • Product monitoring for chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For single-piece carpets up to 1 m width Applications - Stain blockers - Dirt, water and oil repellents - Fluorocarbons - Antistatic agents - Softeners - Flame retardants - Antibacterial chemicals - Moth and beetle repellents - Pile stabilizers - Anti-shedding agents - Resins for wrinkle resistance and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Bodpfou D E A Dex Ag Tsld Foam throughput: 50 - 500 l/min Electrical data Connected load: 6 kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions: HxWxD = 1400 x 2100 x 860 mm Year of manufacture: 2007 Purchase price: €47,600 Financing through our bank is also available. komplett-konzept.leasingo.de Discover more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), ZIM Hülsta Uređaj za podizanje i postavljanje korpusa Uređaj za podizanje korpusa služi za uspravljanje i daljnji transport montiranih korpusa. Uglavnom se koristi kod preša za korpuse s prolaznom funkcijom. Olakšava rukovanje pri postavljanju velikih radnih komada. Bjdpfevdb Ixex Ag Told Transportni i montažni uređaj unutar linije za montažu korpusa. Iza prolazne preše za korpuse, prešani korpusi se pomoću ovog uređaja polažu na stražnju stranu. Tako se omogućuje montaža na donjoj strani. Proizvođač: ZIM Hülsta-Werke Tip: Uređaj za podizanje korpusa Dimenzije: Valjkasti transporter (D x Š x V): 2800 x 900 x 800 mm Širina valjka: 800 mm Nagibna površina (D x Š): 1000 x 900 mm Napajanje: 3x400 V AC Instalirana snaga: 2 kW Financiranje putem naše banke također je moguće. komplett-konzept.leasingo.de Više novih i rabljenih artikala pronađite u našoj trgovini! Međunarodni troškovi dostave na upit!

Stanje: dober (rabljeno), Leto izdelave: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear system for solar power distribution Switchgear details: Manufacturer: Horlemann Switching configuration: KKÜHTTT Model: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) Degree of protection: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin iPrimary voltage: 10 kV Secondary voltage: 400-230 V Connection: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Bsdpfx Aonfu Dysg Told Weight: 1.8 t The pressure relief of the switchgear is provided via a pressure relief chamber in the lower section of the switchgear panel. Documentation: Test report Wiring diagram Financing is also available through our bank. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Leto izdelave: 2025, Stanje: novo, Machine length: 1,500 mm Working width: 560 mm Capacity: up to 2,000 kg/h Standard features: - Rubber lining at infeed and outfeed - Chassis with swivel and fixed wheels - Height-adjustable frame (infeed height: 1,000–1,200 mm / outfeed height: 630–830 mm) - Corrugated brushes - Stainless steel construction - Fresh water spray unit Water consumption: 5 l/min at 5 bar Bsdpscx R D Hjfx Ag Tsld Power: 1.1 kW Dimensions (L x W x H): 1,550 x 1,000 x 1,750 mm Weight: approx. 120 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Ponudba 20137 Tehnični podatki: Bljdpfx Agsygh Ius Tod - 3 kos stacionarnih strojev za izdelavo navojev, pozicionirljivi - Zmogljivost navojev za posamezno enoto do približno M 12 - Globina navoja približno 75 mm - Podajanje vrtanja se nastavlja brezstopenjsko - Hitrost vretena do 490 min⁻¹ - Pnevmatski priključek 6 bar - Pogon 400 V - Potreben prostor približno Š 2000 x V 1600 x G 900 mm - Teža približno 150 kg

Stanje: rabljeno, Leto izdelave: 2007, Proizvajalec: NSM, letnik: 2007, 2 pomični mizi, 4.000 x 2.200 mm, 3 tračni transporterji, 800 x 7.000 mm, 2 robota, proizvajalec Kuka, tip KR 100-2 P2000, krmiljenje KRC2, ročni programirni terminal, tip KSP2, 2 hitrotekoča vrata, postaja za čiščenje plošč, proizvajalec Wandres Evomat, kontrola dvojnih pločevin, proizvajalec NSM, naprava za vlečna sredstva, proizvajalec Amtec, tip PBS34/34, varnostni ograjni sistem, omare za krmiljenje in upravljanje Bledpfx Aox R D N Reg Tod +++ Pozor: Stroj je del spletne dražbe! +++

Stanje: rabljeno, used, good condition Support surface 1350 mm x 1600 mm Width max. 2900 mm extendable - can be opened up 90° Tilting device pneumatic Blodpfx Asvwfxneg Ted Clamping cylinders for workpiece clamping: 2 pcs mobile Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Stanje: dober (rabljeno), Leto izdelave: 2014, Tecna 3484 Universal Spot Welding Unit 8 kVA Universal welding station 8 kVA with hand-operated gun, dual program. Simultaneous connection of two tools with automatic retrieval of the corresponding welding program, which saves time and prevents errors for a simple and safe workflow. Bodywork repairs: resistance spot welding of sheet metal, straightening with dent puller (nails and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheets. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, welding current setting, and compensation function. Bodpfjl Smn Sox Ag Tjld Power supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Maximum welding power: 35 kVA Maximum secondary current: 6.4 kA Thermal current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg Financing through our bank is possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer’s description, all information without guarantee. Features - Save time with rapid, fully automated isolation of high-quality DNA, RNA, and mRNA. - Achieve reliable, reproducible results. - Benefit from high flexibility regarding sample type and volume, as well as elution volume and post-elution processes. - Enjoy software-assisted setup of reagents and consumables. - Automated pipetting of PCRs into LightCycler® capillaries (LightCycler® sample carousel), LightCycler® 480 multiwell plates (96-well), PCR plates, strips, or tubes. Product Description The MagNA Pure LC instrument is a benchtop device designed for the rapid, cross-contamination-free preparation of nucleic acids and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, as well as sample tracking, make the MagNA Pure LC instrument a true “walk-away” solution. Filtration, centrifugation, and other manual steps are completely eliminated. No vacuum pumps or tubing are required. The piston-driven 8-channel nozzle head and direct-displacement liquid handling minimize the risk of cross-contamination to an absolute minimum. UV decontamination and the HEPA filter system provide maximum safety for samples and the environment. Condition: used, untested Scope of delivery as shown Financing through our partner bank is also possible. Bjdjh Dpxhspfx Ag Told komplett-konzept.leasingo.de You will find more items – both new and used – in our shop! International shipping costs available upon request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Semi- & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Mode: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely clear the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-Profile Turntable: 65-inch diameter, laser-cut steel plate with full perimeter deck protection. Maintenance-free Bledpfewb A N Rsx Ag Tod 54-roller bearing support system. Turntable height 2.813 inches from the floor. ANSI No. 50 direct chain drive with chain tensioner. Turntable speed adjustable between 3 and 12 RPM, with smooth start acceleration Film Carriage Lift: 1/2 HP DC motor with variable speed ANSI No. 40 direct chain drive with shock absorber and anti-drop safety Automation Features: Fully electric Cousins Smart Engineering has developed the advanced A-Arm cutting and holding device. It provides significant productivity gains and safety advantages. This technology is exclusive to Cousins machinery. This unique method of attaching and cutting stretch film offers the following advantages: • Selectable overwrap (top banding) function • Stabilizes the load early in the wrap cycle • Places film tail at the top of the load instead of the bottom • No film clamp on the turntable that could be damaged by debris or operator error – additionally, no slip rings are needed to power the turntable, reducing maintenance • Load placement on the turntable is non-critical • No air lines or noisy compressors • New automatic load detection safety function during the first rotation: recognizes uneven or partially stacked upper layers and automatically adjusts A-Arm height to avoid obstructions • A-Arm anti-drop safety Control Features: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) Off – On – Reset switch and operation indicator Automatic wrap cycle start/pause with a single button Cycle pause for applying top sheets Reinforced wrap control for the middle of the load Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension (force-to-load) control Separate speed controls for raising and lowering the film carriage Variable speed control for the turntable Three-beam automatic load height detection sensor for dark or glossy loads Separate controls for 1 to 12 revolutions for top and bottom wrapping Selectable parameters for reduced film tension when wrapping the top and/or bottom edges Non-proprietary UL/CSA approved components A – B – C wrap program selector with the ability to enter and store custom wrap parameters for each program Financing through our partner bank is also available. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Logopak 920 II PF Pallet Labeller Manufacturer: Logopak Pallet Labeller Model: 920 II PF Your Benefits at a Glance - High Speed (up to 240 pallets/hour) - Reduced roll changes - Maximum flexibility - Robust construction (protective housing) - Intuitive operation via touchscreen - Print engine quick-change system - Direct thermal or thermal transfer technology for labels up to A3 size - Integrated database, error diagnostics, and many more features - Operates as a stand-alone solution or integrated into your network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product identification. The rugged mechanical design, featuring a 10 mm thick die-cast aluminum housing with heavy-duty steel hinge plates, is purpose-built for continuous operation in harsh industrial environments. The printer can be controlled externally via a serial interface or can operate as a standalone device thanks to its integrated intelligence. SPECIFICATIONS - Print speed: 150 mm/s - Core diameter: 50 mm/76 mm - Label roll diameter: 180 mm - Font size: 2 mm–50 mm - Printing direction: Rotatable by 90°, 180°, and 270° - Barcode types: Codabar, Code39, Code128, Codematrix, EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A - Interface: V.24 or 20 mA, network-capable - Memory (RAM): 1 MB battery-buffered CMOS, expandable to 8 MB - Ambient temperature: 5°C to 40°C - Dimensions (W x D x H): 700 mm x 500 mm x 400 mm - Weight: approx. 50 kg - Housing: Powder-coated steel Integrated Intelligence: IP54 control unit with Power Leap II® processing performance • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal product database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock rate • RS 422 and 20 mA, Ethernet interface also available (10/100 Mbit) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using higher-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency Bodpsw U Tc Tofx Ag Tjld Financing is available through our banking partner. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Leto izdelave: 2000, Stanje: rabljeno, Tank & Environmental Protection Wozniack Dear Sir or Madam, We offer: Bedpfx Agjc Nkrpj Told 5,000-litre double-walled storage tank Nominal volume: 5 cbm Quantity: 1 Used: but fully refurbished, i.e. the tank has been cleaned, sandblasted, primed, and painted Paint finish: RAL colour of your choice; of course, you can specify your preferred colour at any time. Material: steel-in-steel construction, material grade S235JRG2 Documentation: Manufacturer’s certificate / inspection certificate according to DIN 6616 D/2 and type plate Included: 1 x dipstick overfill prevention device (Grenzwertgeber), new 1 x breather fitting 1 x fill connection 1 x new leak detection device with filled leak detection liquid 1 x ladder 1 x suction line Form: cylindrical storage tank with supports / mounting console Tank dimensions: length approx. 2,710 mm; diameter approx. 1,600 mm; weight approx. 1,500 kg Installation: above-ground Compact Piusi 56 diesel dispensing unit Pump: 230 Volt, up to 55 L/min (optionally available with 70 L/min) ===== Naturally, you can help design your own tank system! We gladly accommodate your colour and equipment preferences where possible. All our units are thoroughly inspected and tested by selected employees at our company. Cost-effective delivery available upon request. Viewing of our equipment is possible at any time. Other tank systems for both above-ground and underground storage are available in all sizes and can be viewed at our premises. Have we convinced you with our offer? If you have any questions or special requests, simply give us a call—one of our experienced staff will be happy to assist you. We are also interested in purchasing existing tank systems at any time. Trade-in of existing installations is possible. Best regards from Warstein, Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Stanje: rabljeno, Leto izdelave: 2013, Pregled Ta sistem za ovijanje je bil izdelan leta 2013 s strani finskega podjetja Haloila. Octopus 1825B je popolnoma avtomatski stroj za ovijanje palet z vrtečim prstanom, zasnovan za stabilizacijo palet pri visoki zmogljivosti. Uporabljal se je za standardne aplikacije pakiranja palet in je v dobrem stanju. Oprema vključuje vhodne in izhodne transportne trakove ter hidravlične module za rokovanje s paletami. Sistem je takoj na voljo. Tehnični podatki Kapaciteta: cca. 40 palet/uro Formati: euro palete; maks. višina palete 1,8 m Pakirni sistem: stretch-ovijanje z vrtečim prstanom Vrsta folije: standardna stretch folija za palete (podrobnosti niso navedene) Ravnanje s paletami: integrirani transportni trakovi + hidravlične vhodno/izhodne naprave Bljdoyb Stwjpfx Ag Tod

Leto izdelave: 2000, Stanje: kot nova (razstavni stroj), številka stroja/vozila: 13:000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We are pleased to offer a 13,000-litre double-walled storage tank for diesel storage as follows: - Nominal capacity: 13 cbm - Quantity: 1 - Used, but fully overhauled – i.e. the tank has been cleaned, fully refurbished, primed, and painted - Colour finish: lacquered according to RAL colour chart; custom colours available upon request Blodpscl Sb Rsfx Ag Tsd - Material: steel-in-steel, material grade S235JRG2 - Documentation: Manufacturer’s certificate/test certificate in accordance with DIN 6616 D/2 and nameplate - 1 dipstick - 1 vent connection - 1 fill connection - 1 new overfill prevention device - 1 new leak detection unit with filled leak detection fluid - 1 ladder - 1 suction line - Design: cylindrical storage tank with feet/bracket Tank dimensions: - Length: approx. 6,800 mm + diesel pump 500 mm - Diameter: approx. 1,600 mm - Weight: approx. 2,800 kg Aboveground storage Compact diesel dispensing system AF 3000 (new), hose length 4 m (longer on request) Approved automatic fuel nozzle. Pump: 230 V, max. 65 L/min or 230 V, max. 90 L/min ===== Top offer: Liquid fertilizer – AHL tank systems available from 10,000 to 100,000 litres. Naturally, you can help design your own tank system! All our systems are thoroughly checked and inspected by selected, experienced staff within our company. Affordable delivery can be arranged on request. Inspection of our systems is possible at any time. Further tank systems for aboveground and underground storage in all sizes are available and can be viewed and purchased on our premises. Have we convinced you with our offer? If you have any questions or requirements, simply give us a call. One of our experienced staff members will be pleased to advise you. Price/Shipping The price for the tank station is ex-works Warstein, loaded free of charge onto your vehicle. Delivery is available at an additional, cost-effective rate. Delivery time: immediate You will receive an invoice with VAT shown separately. In addition, we buy existing tank systems and, as a certified specialist according to the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and transport them away. Best regards from Warstein Tank & Environmental Protection Wozniack

Stanje: dober (rabljeno), Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very compact and, due to its IP65 protection rating, is also suitable for use in wet environments without any issues. With just five buttons, the SOEHNLE 2790 digital display is particularly easy to operate. The integrated functions include On/Off, Tare, Clear Tare, Zero, and Print. Additionally, the 2790 display unit features a piece counting function. The SOEHNLE 2790 display unit can be powered not only by the supplied 230 V power adapter but also runs independently for up to 100 hours on batteries. The 20 mm high digital display is backlit when connected to mains power, ensuring excellent readability. During battery or accumulator operation, automatic shutoff can be set to conserve energy. Soehnle Professional 2790 Weighing Terminal Technical Data ᐳ Housing made of anodized aluminum with polyamide injection-molded parts ᐳ Dimensions: L 306 x W 77 x H 82.6 mm ᐳ Connection for one scale with strain gauge (DMS) load cells ᐳ Load cell supply voltage: 4 V, approx. 67 Hz square wave ᐳ Measuring voltage: 0.2 - 12 mV ᐳ Smallest input signal per graduation value: 0.4 µV Bjdpfxed Sfb Io Ag Told ᐳ Load cell impedance range: 87-1,200 Ω ᐳ Load cell connection: 4- or 6-wire ᐳ Temperature range: -10 to +40°C ᐳ Weighing range: 0.1 - 100,000 kg ᐳ Mains operation via plug-in power supply: Input 230 V AC, 50 Hz, Output 9 VDC, 300 mA ᐳ Battery operation for approx. 160 hours with 4 AA 1.5 V batteries ᐳ Auto-off function (adjustable timer) Soehnle 9013 Floor Scale Weighing platform 150x125 cm Up to 1500 kg capacity The floor scale can be operated in a temperature range of -10°C to +40°C. Ready for immediate use after installation. Maintenance-free weighing technology from SOEHNLE. More items - new and used - can be found in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Dobava vključuje: 01x Povišanje končnega stojala, rabljeno Regalni sistem: Bito Tip: PRO Barva materiala: sendzimirno pocinkano Profil okvirja: P5 Bodpfsyfq Hwex Ag Told Dimenzije profila: 120 x 76 x 2,25 mm Raster luknje: 50|50 mm Višina: 500 mm + vmesni člen Globina: 1.100 mm Vaši kontaktni partnerji v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Morebiten transport oz. pošiljanje tega artikla je povezano z dodatnimi stroški, ki jih je možno individualno preveriti glede na kraj dostave in obseg dobave.

Stanje: zelo dobro (rabljeno), Heavy-duty wooden pallets with 3 runners Accessible from all four sides Bodsl Uvv Tspfx Ag Tsld Length: 1680 mm Width: 1250 mm Board thickness: 45 mm Weight: 82.5 kg Several units available

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, – robustna konstrukcija TEHNIČNI PODATKI: – maks. širina reza: 3050 mm – min. širina reza: 450 mm – maks. višina reza: 125 mm – premer liste – trije rezalni agregati – vsak rezalni agregat nastavljiv neodvisno: 500 mm – moč motorjev: 3 x 4 kW – moč motorja za pomik: 1,5 kW – dve stopnji hitrosti podajanja – pritisk materiala – magazin za nalaganje desk – transportne dimenzije (d/š/v): 620 / 200 / 120 cm – teža: ~ 800 kg Bledpfew Nau Ssx Ag Tjd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Transportni vozički za industrijske palete 1.000x1.200 mm (imenovani tudi paletni vozički, šasije za palete, dolly) so robustni okvirji s kolesi, ki olajšajo premikanje naloženih palet v skladišču ali obratu in imajo nosilnost 1.500 kg. Blodjx Hi Nbspfx Ag Ted

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Nous proposons ce système de rayonnage à accumulation pour palettes Bito Lagertechnik "PROflow", quasi neuf : rayonnage à gravité Bito pour palettes, composé de partie 1 – 2018 avec 260 positions palettes (occasion), et partie 2 – 2020 avec 300 positions palettes (état quasi neuf). Les deux installations ont été démontées par une entreprise spécialisée et sont actuellement entreposées sur le site de Föhren. Une analyse d’état a été réalisée par le fabricant avant le démontage. Celle-ci et d’autres documents sont disponibles sur demande. Selon le fabricant, les rayonnages peuvent également être adaptés individuellement. Un service de montage avec réception peut être proposé. Fabricant : Bito Lagertechnik Modèle : Rayonnage à accumulation pour palettes PROflow Année de fabrication : 2026 État : quasi neuf ID catégorie : 394 Bljdpfxsydfl Se Ag Tjd ID type : 1828 Type : Rayonnage à gravité Bito pour palettes Pour toute question ou information complémentaire, n’hésitez pas à nous contacter par message ou par téléphone.

Stanje: dober (rabljeno), Your contacts in our company: Mr. Andre Evering Bedpfsdvad Esx Ag Told Mr. Marcel Brahms Mr. Simon Blank We are offering you a used load distributor from the manufacturer Dexion for sale. These can also be used for other manufacturers. The load distributors are suitable for a rack depth of 800 mm. Scope of delivery includes: 01x load distributor, used Material finish: fully galvanized Total length: approx. 980 mm C-profile dimensions: approx. 185 x 35 mm Opening for rack feet: approx. 115 mm Weight per piece: approx. 10.074 kg For distributing bay loads over a larger surface area. Our service overview: (prices on request) Assembly, installation Please note our general assembly conditions. Rack inspection Racking inspection according to DIN EN 15635 performed as per BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Stanje: novo, Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of Racking Rows: 01 unit Length per Rack Row: approx. 2,550 mm Number of Bays per Rack Row: 01 unit at 2,400 mm each Number of Levels plus Base Level: 02 units Scope of Delivery Includes: 02x Pallet Rack Uprights, new Material finish: sendzimir galvanized Base plate color: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. horizontal and diagonal braces, base plates Uprights are delivered unassembled (bolted lattice framework) Height: 2,350 mm Depth: 800 mm Note: Uprights are delivered disassembled. We are happy to pre-assemble the uprights for you for an additional charge of €17.50 plus 19% VAT. 04x Pallet Rack Beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Bsdpfoktbnmjx Ag Tsld Connector: 5 HK (hooks) Clear span: 2,400 mm Max. load per pair of beams: 1,600 kg, with evenly distributed load 08x Safety Pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting 08x Expansion Anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete Through-bolt installation: M 12-13/95 04x Shim Plates, new Design: fully galvanized For leveling uprights that are installed on uneven floors 01x Load Capacity Signs with specifications of bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your Contacts in Our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Article: This item is offered for collection only. Should shipping or transportation of this item be required, additional costs will apply, which can be quoted separately depending on the delivery location and scope of delivery.