Oznaka Udarec nakup rabljenega (1.041)

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), številka stroja/vozila: 458/08 (C.2.144.1301/02), Maximum format: B1 Voltage: 100–240V // 300–330VA // 50/60Hz Klsdpfxofh Dp Ts Al Ner Further MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available from our stock. ON REQUEST.

Stanje: rabljeno, Leto izdelave: 1991, Tlak 4 t Izvleček 200 mm Hod 9,5 mm Kledpfxeyx Ikbs Al Nor Število gibov 280 - 1400 /min Oddaljenost med mizo in batom, pri velikem hodu zgoraj, nastavitev zgoraj 215 mm Površina mize 320 x 160 mm Višina mize nad tlemi 940 mm Površina bata 140 x 75 mm Nastavitev bata 20 mm Premer pločevine - 600 mm Število utorov 6 - 120 Debelina materiala 1,0 mm Oddaljenost med sredino delilnega vretena in sredino st. 15 - 250 mm Pogonska moč 3,0 kW Teža 4,30 kg Prostorska potreba (ŠxGxV) 1,2 x 2,2 x 2,0 m s tekoče nastavljivim pogonom (Stöber zobniški pogon), pnevmatska kombinacija sklopke-zavora (Ortlinghaus), ročno nastavljanje bata, pnevmatska pritrditev pločevine, avtomatska odstranjevalna naprava, ročno nastavljiva višina mizne plošče, ročno nastavljanje premera stiskanja, popolnoma avtomatsko centralno oljno mazanje, zvočno izolirana kabina.

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Punch NLF-12-26 Manual Foot-Operated Sprossen Punch Morsö NF is a foot-operated punching machine for cutting window mullions, cabinet doors, kitchen cabinets, etc. The Morsö NF guarantees a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is incrementally adjustable. Left and right stops with adjustable end stops ensure precise operation. The favorable lever-ratio of the foot pedal allows for very easy operation. Dual springs return the blades to the starting position automatically. Compared to a milling machine, the following points should be considered with the Morsö NF: – No dust – No noise – No compressor required - The Morsö NF guarantees a smoother and consistently more precise cut - The Morsö NF produces no dust, eliminating the need for an extraction system - Changing blades takes less than 15 minutes - Setup and adjustment of stops - Even as the blades wear, the 45° angle remains unchanged, constantly ensuring precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Left and right stop: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Kedovz Hyhopfx Al Nolr Scope of delivery: - Safety shield - Scrap chute - 6 end stops - Stops on the left and right side of the machine - 1 neck blade (size of your choice) - 1 pair of side blades

Leto izdelave: 2014, stanje: rabljeno, Maks. izsekalna sila: 50 kN Ksdpfx Ajwb Eucol Nelr Sprožitev hoda preko nožnega stikala Dobro stanje

Stanje: pripravljen za uporabo (rabljen), * Znamka: Voestalpine * Dovodna odprtina: 900 x 680 mm. Klodoywmmxjpfx Al Nor * Pogon: 55 kW elektromotor.

Stanje: rabljeno, Leto izdelave: 2000, Druck 16 t Ausladung 350 mm Hub 25 mm Hubzahl 200 - 1000 /min Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 230 mm Tischfläche 480 x 280 mm Tischhöhe über Flur 1050 mm Stößelfläche 200 x 110 mm Klodpfxew U Ekve Al Ner Stößelverstellung 25 mm Durchmesser der Platinen - 1800 mm Nutenanzahl 16 - 460 Materialstärke 2,0 mm Entfernung zwischen Mitte Teilspindel und Mitte St 160 - 680 mm Antriebsleistung 6,0 kW Gewicht 5,60 t Raumbedarf (BxTxH) 1,4 x 2,9 x 2,4 m Baujahr 1971 - neue Steuerung 2000 mit stufenlos regelbarem Drehstrom-Antrieb, pneumatischer Kupplung (Ortlinghaus), manueller Stößelverstellung, elektro-pneumatischer Platinenfestspannung, automatische Abstreifvorrichtung, intermittierender Schaltung (Stößelanhebeeinrichtung für Leerhub), vollautomatischer Öl-Zentralschmierung, Zweihandbedienung, Steuerung Siemens S 7 (Bj. 2000) diverse Wechselräder

Stanje: rabljeno, lastna masa: 3.830 kg, skupna masa: 12.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2006, dolžina tovornega prostora: 7.950 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.850 mm, prostornina tovornega prostora: 56 m³, vzmetenje: zrak, velikost pnevmatike: 205/65 R17,5, medosna razdalja: 1.350 mm, barva: bela, Oprema: ABS, Drum brake Payload 8,170 kg Relieved to a total towing weight of 9,990 kg Lifting and lowering device BPW axles Kjdpfx Alerp E Rzj Nelr Subject to errors and omissions

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Notcher NSF-6-20 Manual Foot-Operated Sprossen Notcher Morsö NF is a foot-operated sprossen notcher designed for cutting window mullions, cabinet doors, kitchen cabinets, etc. Morsö NF ensures a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is continuously adjustable. Stops, left and right, with adjustable end stops, guarantee precise work. The favourable lever transmission of the foot pedal allows extremely easy operation. Double springs return the knives to their starting position. When comparing the Morsö NF with a milling machine, please note the following advantages: – No dust – No noise – No compressor required - The Morsö NF delivers an even smoother and more precise cut - The Morsö NF produces no dust and therefore does not require an extraction system - Blade change on the Morsö NF takes less than 15 minutes - Set-up and adjustment of stops - As the knives wear down, the 45° angle remains unchanged, guaranteeing consistently precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm Klodpfx Aljvz Hynj Nor - Stops, left and right: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Waste chute - 6 end stops - Stops on the left and right sides of the machine - 1 neck knife (size of your choice) - 1 pair of side knives

Stanje: rabljeno, ABLEPick-Picktag AT-505 Rev 1.3 RA2336 Kledpfxjvygx Io Al Nor Seriennummer: A17610000-2302 102AT505000004G V1.1 Produktabmessungen: 147 x 46 x ca. 20 mm Preis zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG, 97076 Würzburg

Stanje: rabljeno, Leto izdelave: 1996, 1996 Rezkalni stroj Comec FRV / 1 Moulder Kledpou U Nvyofx Al Nor

Stanje: dober (rabljeno), Label printing press, 4 colors, 3 colors, 2 colors or 1 color, die-cutting unit, 2 embossing plates, various mounting plates, laminator, UV dryer, unwind unit, slitter-rewinder, scanner camera, in good condition, immediately available. Kjdpfjiphigox Al Nolr

Leto izdelave: 2004, stanje: dober (rabljeno), EUROTRON IND-XR 500 turret punch, year of manufacture 2004, serial number S1-2004-1, featuring adjustable X and Y axes; please refer to the test result photo. The machine is in good condition and available immediately. If you are interested, we would be pleased to inform you about other machines available in our facility as well. You are welcome to inspect the machine at our premises by appointment. Klsdpfxsh H Iu Tj Al Ner

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12412802, lastna masa: 540 kg, največja dovoljena obremenitev: 760 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 2.370 mm, Leto izdelave: 2026, Lademaß ca. 1640 mm x 3150 mm x 2000 mm Außenmaße ca. 2150 mm x 4450 mm x 2370 mm zulässiges Gesamtgewicht: 1300 kg Nutzlast: ca. 760 kg (Nutzlast variiert je nach Zusatzausstattung) Hersteller: Debon Besonderheiten - Aluminium Koffer - Polyesterdach und Bug ( Aerodynamisch ) Ksdpfeq T R R Tex Al Njlr - Pullmann V2 Niederflurfahrwerk - Bodenplatte: Aluminium Boden ( Rutschhemmend ) - Tür / Rampen Kombination ( Aluminium ) - Radstoßdämpfer montiert inkl. 100 km/h Zulassung - Seitentür, verschließbar - Innenbeleuchtung, mit Schalter - 6 Verzurrösen auf Ladeboden - Fahrzeugpapiere inklusive weitere Ausstattung - Heckstützen - Bremskeile + Halter Fahrwerk - Pullman V2 | Gefedert mit Schraubfeder und Stoßdämpfer | V-Deichsel mit Zugkugelkupplung | Automatik-Schwerlaststützrad Elektrik - 12 Volt | 13 poliger Stecker | Begrenzungsleuchten | Nebelleuchte Sie möchten diesen Anhänger kaufen oder haben weitere Anhänger-Rückfragen dann benutzen Sie bitte unsere interne Hochlader-Anhäger "Nr.12412802".

Stanje: zelo dobro (rabljeno), dolžina tovornega prostora: 318 mm, širina tovornega prostora: 67 mm, višina nakladalnega prostora: 57 mm, Supply Air Unit Rox Lufttechnik HYD 0100 HKB Used equipment, in good condition, see photos Length: 318 cm Width: 67 cm Height: 57 cm Airflow rate: 800 m³/h Heating capacity: 3 kW Cooling capacity: 4.4 kW Includes heating and cooling coils 8 units available in stock. Asking price: €800 net per unit ex-stock Goods are in stock. Transport and installation available upon request. Inspection possible at any time by appointment. Kledpfx Alotwz Ats Njr Further information available upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our Terms and Conditions, all prices excl. VAT ex-warehouse)

Stanje: novo, Leto izdelave: 2025, skyLaser Mark – Laser Engraving System 2D, optional 3D, Fiber Laser Engraving / Marking Laser – the complete solution for your complex laser engraving applications. Important: Please compare the installed components in the available laser systems: Scanlab® scanner, IPG Photonics® laser source, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, wiring – all components are exclusively German-made! The laser systems are 100% manufactured at our factory in Plauen, according to customer specifications! Competitors frequently use Chinese components (starting with the controller: EZCAD = Chinese origin!). (* Pricing depends on configuration. This is a brand-new laser machine, manufactured in-house.) Overview of the skyLaser marking / engraving laser: Processing area: from 110 x 110 mm, 120 x 120 mm or 300 x 300 mm (F-Theta lenses variable, 3D option possible) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W / 30W / 50W New: Software-controlled, variably adjustable working width (X axis max. 200 mm, depending on design) included New: Software-controlled, variably adjustable working height (Z axis max. 400 mm, depending on design) included Optional: Other working areas – automatic material feed, etc. Air cooling due to low energy consumption Marking speed: up to 5000 mm/s (SCANLAB dynAXIS® galvanometer scanner and SCANcube® 10 can achieve marking speeds of up to 640 characters per second.) Redundant safety system Laser class: 1 (or class 2 depending on configuration and optional pilot laser) pfeifer-technology HQ mirrors and optics for optimal results, powered by Scanlab® pfeifer-technology industrial PC including pre-installed control software New: Including Laser Focus Finder New: Including process air management Optional: Positioning laser – integrated diode laser for optimal alignment New: F-Theta lens 110 x 110 mm working area with protective glass included (optionally expandable to 120, 180, or 350 mm) Practically maintenance-free Main features: Get inspired and request our product video featuring your sample production! Model: Engraving Laser skyLaser Mark IPG Laser Working area: 100 x 100 mm or 120 x 120 mm (F-Theta 160 mm), other sizes optional Laser power: 20W / Optional: 30W / 50W (air-cooled) Laser type: Ytterbium Pulsed Fiber Laser Engraving speed: < 5000 mm/s Engraving depth: varies by material (we are happy to test your application) Wavelength / frequency: 1.064 μm / 20 to 80 kHz (adjustable) Cooling: air-cooled Software: skyLaser marking software V5.x, pre-installed on included industrial PC Warranty: 2 years Technical specifications: Applications: Depending on surface and pigmentation, suitable for anodized aluminum, V2A stainless steel, lacquered brass, steel, various plastics, models, promotional products, decorative items, toys, machine front covers, control elements Kledpfobv Daysx Al Njr Not suitable for glass or acrylic! Power supply / consumption: 230 V~ 50Hz 6A / max. 300W (without extraction unit, optional) Physical properties: System housing dimensions (2013): Height 1950 mm x Width 1080 mm x Depth 720 mm Weight: 100 kg – 400 kg depending on system configuration

Stanje: dober (rabljeno), Leto izdelave: 1976, Wire diameter range: a) Single wire: 2.2 - 3.8 mm b) Double wire: 2.2 - 3.4 mm Kedpfx Alod Im Nue Nelr Nail lengths: 10 - 80 mm Output: 300/600 nails/min.

Stanje: zelo dobro (rabljeno), live centre Make: Röhm Morse taper: MT 6 1 tip 60 degrees 1 tip 90 degrees Kjdpfogviq Njx Al Nolr total length: 340 mm weight: 8.5 kg

Stanje: novo, lastna masa: 320 kg, največja dovoljena obremenitev: 880 kg, skupna masa: 1.200 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 1.180 mm, velikost pnevmatike: 185/70R13, Low loader with lid from manufacturer ANSSEMS, model GTB1200 251x126 VT2. As standard equipment, the Anssems box trailer with brake features aluminium side panels, an aluminium lid with gallery, ramp flap, internal locks, adjustable lashing eyes, profile channels for accessory installation or load securing, jockey wheel, and a V-shaped drawbar. Kjdpfx Alorvzm Dj Nelr We also offer accessories for Anssems car trailers such as toolboxes, lashing straps, lashing eyes, 100 km/h certification, and anti-theft devices.

Stanje: potreben popravila (rabljeno), Machine number: 63882 Kodpfx Asgd R Sgjl Nelr Type / Model: 8LES Pressing force: 22 t Table: 900 x 450 mm Ram width: 350 mm Installation height without / with support plate: mm Stroke: 8 to 150 mm Condition: Disassembled, must be assembled, not tested The machine had a broken cylinder mount. A replacement part was manufactured – see also images. Price as-is, price after assembly upon request.

Stanje: dober (rabljeno), Leto izdelave: 2011, Tehnične specifikacije (Spark 2530) • Velikost plošče: do 25” x 30” (635 x 762 mm) • Ločljivost: 2.000–4.000 ppi (do 10.160 ppi za varnost) • Programska oprema: Grapholas CDI, podpira 1-bit TIFF in LEN datoteke Kljdpfx Alsw Tc Uij Ner • Dimenzije: Š 1.600 mm · G 870–1.180 mm · V 1.070 mm • Teža: 1.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2013, Povzetek stroja Kompakten, preverjen digitalni izrisovalnik plošč za tiskarne etiket in ožjih trakov. Obvladuje širok nabor materialov (digitalni fleksotisk, filmi brez kemije, digitalni knihtisk na filmski/kovinski osnovi in sito tisk) v priljubljenem formatu 24″×20″ (609×508 mm). Opremljen z EasyClamp za hitro in priročno nalaganje na vakuumski boben. Tehnični podatki (iz prodajalčeve dokumentacije) • Model: Esko CDI Spark 2420 — Optika 7.5 • Maks. velikost plošče: 609 × 508 mm (24″ × 20″) • Napajanje: 220–240 V, 1/N/PE, 6 A, 50/60 Hz • Dimenzije stroja (Š×D×V): 1160 × 700 × 1050 mm | Teža: ~320 kg • Serijska številka: 107199 | Leto: 2013 • Oprema/funkcije: nalagalni sistem EasyClamp na vakuumskem bobnu Stanje & Ogled Kedpfx Aljw Tc Tfe Nelr • Iz zaprtja podjetja; stroji so bili v uporabi do zaprtja in jih je mogoče po dogovoru videti v delovanju.

Leto izdelave: 2000, stanje: rabljeno, Pneumatic press, pneumatic punch, multifunction punching machine, punch press, universal punch, punching machine, pneumatic hole punch, notching machine, notching punch - Manufacturer: All Mecanic, multifunction punching machine - Model: 994.500-1 - Version: pneumatically operated, with foot control - Punching tool: see photos Kljdogurw Eopfx Al Njr - Dimensions: 400/270/H370 mm - Weight: 28 kg

Leto izdelave: 1994, stanje: dober (rabljeno), Multi-function punch, punching machine, hole punch, pneumatic hole punch - Item no.: 296 346 - Dimensions: 800/400/H1200 mm Kljdjvmq Utepfx Al Njr - Weight: 170 kg

Leto izdelave: 1998, stanje: rabljeno, Multifunction punch, punch press, hole punch, pneumatic hole punch - Operation: pneumatic - Year of manufacture: 1998 Kodpfsb A Hq Nsx Al Nslr - Model: 270164-1

Stanje: dober (rabljeno), Multifunkcijski prebijalnik, prebijalnik, luknjač, pnevmatski prebijalnik -Št. artikla: 296 566 -Dimenzije: 800/400/H1200 mm -Teža: 180 kg Kedpfx Aleb A I H Ro Nolr