Oblike Udarec nakup rabljenega (177)

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), številka stroja/vozila: 458/08 (C.2.144.1301/02), Maximum format: B1 Voltage: 100–240V // 300–330VA // 50/60Hz Ihodefh Dp Tepfx Adksw Further MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available from our stock. ON REQUEST.

Stanje: rabljeno, Leto izdelave: 2000, Druck 16 t Ausladung 350 mm Hub 25 mm Hubzahl 200 - 1000 /min Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 230 mm Tischfläche 480 x 280 mm Ihodpsw U Ekvofx Adkew Tischhöhe über Flur 1050 mm Stößelfläche 200 x 110 mm Stößelverstellung 25 mm Durchmesser der Platinen - 1800 mm Nutenanzahl 16 - 460 Materialstärke 2,0 mm Entfernung zwischen Mitte Teilspindel und Mitte St 160 - 680 mm Antriebsleistung 6,0 kW Gewicht 5,60 t Raumbedarf (BxTxH) 1,4 x 2,9 x 2,4 m Baujahr 1971 - neue Steuerung 2000 mit stufenlos regelbarem Drehstrom-Antrieb, pneumatischer Kupplung (Ortlinghaus), manueller Stößelverstellung, elektro-pneumatischer Platinenfestspannung, automatische Abstreifvorrichtung, intermittierender Schaltung (Stößelanhebeeinrichtung für Leerhub), vollautomatischer Öl-Zentralschmierung, Zweihandbedienung, Steuerung Siemens S 7 (Bj. 2000) diverse Wechselräder

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Notcher NSF-6-20 Manual Foot-Operated Sprossen Notcher Morsö NF is a foot-operated sprossen notcher designed for cutting window mullions, cabinet doors, kitchen cabinets, etc. Morsö NF ensures a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is continuously adjustable. Stops, left and right, with adjustable end stops, guarantee precise work. The favourable lever transmission of the foot pedal allows extremely easy operation. Double springs return the knives to their starting position. When comparing the Morsö NF with a milling machine, please note the following advantages: – No dust – No noise – No compressor required - The Morsö NF delivers an even smoother and more precise cut - The Morsö NF produces no dust and therefore does not require an extraction system - Blade change on the Morsö NF takes less than 15 minutes - Set-up and adjustment of stops - As the knives wear down, the 45° angle remains unchanged, guaranteeing consistently precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Stops, left and right: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield Ihodpsvz Hynofx Adksw - Waste chute - 6 end stops - Stops on the left and right sides of the machine - 1 neck knife (size of your choice) - 1 pair of side knives

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Punch NLF-12-26 Manual Foot-Operated Sprossen Punch Morsö NF is a foot-operated punching machine for cutting window mullions, cabinet doors, kitchen cabinets, etc. The Morsö NF guarantees a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is incrementally adjustable. Left and right stops with adjustable end stops ensure precise operation. The favorable lever-ratio of the foot pedal allows for very easy operation. Dual springs return the blades to the starting position automatically. Isdpfx Adsvz Hyhskehw Compared to a milling machine, the following points should be considered with the Morsö NF: – No dust – No noise – No compressor required - The Morsö NF guarantees a smoother and consistently more precise cut - The Morsö NF produces no dust, eliminating the need for an extraction system - Changing blades takes less than 15 minutes - Setup and adjustment of stops - Even as the blades wear, the 45° angle remains unchanged, constantly ensuring precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Left and right stop: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Scrap chute - 6 end stops - Stops on the left and right side of the machine - 1 neck blade (size of your choice) - 1 pair of side blades

Stanje: pripravljen za uporabo (rabljen), Od leta 1991 do zadnje uporabe in malo občutljiva za težave, kljub temu da je kitajski stroj iz 90-ih let. Stroj za prebijanje in kovičenje ovalnih členov. Ijdpfxsx Nd U Dj Adkohw

Leto izdelave: 2004, stanje: dober (rabljeno), EUROTRON IND-XR 500 turret punch, year of manufacture 2004, serial number S1-2004-1, featuring adjustable X and Y axes; please refer to the test result photo. The machine is in good condition and available immediately. If you are interested, we would be pleased to inform you about other machines available in our facility as well. You are welcome to inspect the machine at our premises by appointment. Ijdpfxsh H Iu To Adkohw

Stanje: dober (rabljeno), Izsekovalni stroj z vrtljivim roko Schön, v dobrem stanju, takoj na voljo. Ihodpfjvvhfusx Adksw V primeru interesa vam z veseljem posredujemo informacije o drugih strojih v naši ponudbi. Vabljeni ste, da si stroj ogledate v naši hiši po predhodnem dogovoru.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Taylor Hobson Tallyrond 300 Isdpfx Ajxpqwiodkehw v dobrem stanju, popolnoma obnovljen pri sm-instruments (z novo krmilno enoto in programsko opremo) vključno s pomožno mizico in dodatki Dobavni rok: nekaj tednov

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Orodja za linije za proizvodnjo žlebnih sistemov in dodatkov Ponujamo ekstrudirna orodja za PVC, namenjena: -proizvodnji žlebnih sistemov, vključno z RYNNA Royal Dual Wall Gutter in Rynna 125, -kotnikov, kolen in drugih PVC dodatkov, -drugih konstrukcijskih in gradbenih elementov iz PVC. Razpoložljive vrste orodij: -Orodja Rynna Royal Dual Wall Gutter -Orodja Rynna 125 Ijdpeydbl Ujfx Adkehw -Ostala orodja za dodatke in žlebne sisteme -Žlebni sistem Royal Dual Wall Gutter Značilnosti: -Izdelani iz visokokakovostnega orodnega jekla, odpornega proti obrabi -Natančno oblikovanje profilov -Možnost prilagoditve parametrov orodij proizvodnim zahtevam -Kompatibilni z linijami za granulacijo in ekstruzijo PVC OPOMBA: Za podrobnejše informacije o orodjih in izdelkih nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2021, Overview The packaging machine was manufactured in 2021 by the Italian producer V-Shapes. This compact machine doses a variety of products into individual sachets ranging from 0.5 ml to 25 ml. The scope of supply also includes a printer, allowing in-house production of sachets. The machine can be inspected under power at any time. Technical Data Packaging Machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Changeover time for pack sizes: 15 minutes Number of packaging lanes: 1 Maximum film reel dimensions: width 110 mm / 4.33” diameter 250 mm Film reel weight: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard seal dimensions: 5 mm (± 1 mm) Machine colour: Steel Electronic components: Standard IP55, IP67 available on request Standard electronics: PLC, 6 brushless motors Pneumatic dosing system: Volumetric measuring Dimensions of V-shaped packs: Height from 50 to 100 mm / 1.969” to 3.937”, Width from 40 to 100 mm / 1.575” to 3.937” Air pressure: 7 bar Electrical load: 20 kWh Weight (max.): 1000 kg / 6612 lb Machine footprint: 1500 mm x 1000 mm x 1000 mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152 mm/sec) or 12 ips (300 mm/sec) 4 external ink tanks of 2l each Dimensions: 606 mm x 580 mm x 795 mm Weight: 60 kg (without material) Ihodpfx Adjl Hx Rdokew

Stanje: dober (rabljeno), Leto izdelave: 1976, Wire diameter range: a) Single wire: 2.2 - 3.8 mm Ihsdpfjd Im Nujx Adksw b) Double wire: 2.2 - 3.4 mm Nail lengths: 10 - 80 mm Output: 300/600 nails/min.

Stanje: zelo dobro (rabljeno), live centre Make: Röhm Iodpsgviq Njfx Adkjhw Morse taper: MT 6 1 tip 60 degrees 1 tip 90 degrees total length: 340 mm weight: 8.5 kg

Stanje: rabljeno, Rezervoar iz nerjavečega jekla 350 HL – Valjast na nogah – Tlačni / Izoliran / Varnostna lestev Proizvajalec SOTECH (Bergerac, Francija) Kalibracijska plošča: Michael Paetzold, 3700 avenue de Toulouse – 33140 Cadaujac – Francija Iodpfx Adjx Efh Uokjhw Tip Tlačni rezervoar iz nerjavečega jekla – izoliran – pokončno valjaste oblike na nogah – z integrirano varnostno lestvijo Industrijska uporaba Skladiščenje ali procesiranje tekočin prehrambne kakovosti pod tlakom z integriranim nadzorom temperature. Idealen za proizvodnjo vina (mirno in peneče), sokov, piva ali lahkih kemikalij, ki zahtevajo tlačni režim in toplotno stabilnost. Glavne tehnične specifikacije: - Nazivna kapaciteta: 350 hektolitrov (35.000 litrov) - Prelivna kapaciteta: določena s certificiranim merilnim sistemom - Oblika: pokončen valjast rezervoar na nogah - Material: nerjaveče jeklo prehrambne kakovosti - Obratovalni tlak: 1 bar - Toplotna izolacija: dvojna stena ali integrirana izolacijska obloga - Oprema: - Integrirana varnostna lestev s hrbtno zaščito za varen dostop na vrh - Iztok z ventilom - Zgornji/spodnji revizijski odprtini (manhole) - Certificiran merilni sistem (cert. št. BJ12.04.40002) - Združljivost s CIP sistemi - Leto izdelave: 2003 🧩 Uporaba stroja Visoko zmogljiv rezervoar iz nerjavečega jekla, zasnovan za tlačno in termično stabilno skladiščenje tekočin. Popoln za nadzorovano fermentacijo vina, preprečevanje oksidacije in higiensko skladiščenje občutljivih tekočin. ⚙️ Lastnosti / Prednosti Model združuje tlačno odpornost in učinkovito toplotno izolacijo, kar omogoča stabilne notranje pogoje. Integrirana varnostna lestev in certificiran sistem za merjenje prostornine zagotavljata varnost in natančnost v obratovanju. Primerno za zahtevno industrijsko uporabo v enologiji in širše.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Iodpfshvi E Ijx Adkshw Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), GIC VFB4000 v brezhibnem stanju. Uporabljena je bila le nekaj tednov, preden pogodba ni bila sklenjena. Lahko se dobavi kot linija skupaj z Multipond tehtnico (tudi ta je bila uporabljena le nekaj tednov). Ijdpfsvtcqgex Adkohw

Leto izdelave: 2000, stanje: rabljeno, Pneumatic press, pneumatic punch, multifunction punching machine, punch press, universal punch, punching machine, pneumatic hole punch, notching machine, notching punch - Manufacturer: All Mecanic, multifunction punching machine - Model: 994.500-1 - Version: pneumatically operated, with foot control - Punching tool: see photos - Dimensions: 400/270/H370 mm Ihedpfx Aogurw Eodkow - Weight: 28 kg

Leto izdelave: 1994, stanje: dober (rabljeno), Multi-function punch, punching machine, hole punch, pneumatic hole punch Ihodsvmq Utopfx Adksw - Item no.: 296 346 - Dimensions: 800/400/H1200 mm - Weight: 170 kg

Leto izdelave: 1998, stanje: rabljeno, Multifunction punch, punch press, hole punch, pneumatic hole punch - Operation: pneumatic Iedpfx Aob A Hq Njdkjhw - Year of manufacture: 1998 - Model: 270164-1

Stanje: dober (rabljeno), Multifunkcijski prebijalnik, prebijalnik, luknjač, pnevmatski prebijalnik -Št. artikla: 296 566 -Dimenzije: 800/400/H1200 mm Ihsdsb A I H Rspfx Adkew -Teža: 180 kg

Stanje: zelo dobro (rabljeno), Multifunction punch, punching machine, hole punch, pneumatic hole punch - Item No.: 296 566 Isdpsb A Hl Rjfx Adkshw - Weight: 170 kg

Stanje: potreben popravila (rabljeno), Machine number: 63882 Type / Model: 8LES Ihodpfxogd R Sge Adksw Pressing force: 22 t Table: 900 x 450 mm Ram width: 350 mm Installation height without / with support plate: mm Stroke: 8 to 150 mm Condition: Disassembled, must be assembled, not tested The machine had a broken cylinder mount. A replacement part was manufactured – see also images. Price as-is, price after assembly upon request.

Leto izdelave: 1995, stanje: dober (rabljeno), multifunctional punching machine, punch, hole-punch, pneumatic hole punch - operation: pneumatic Iodpfob A Nc Hex Adkohw - year of manufacture: 1995

Leto izdelave: 1998, stanje: dober (rabljeno), Multifunction punching machine, punch, hole-punch, pneumatic hole punch Iedpfob A Hwaex Adkjhw - Pneumatically operated - Year of manufacture: 1998

Stanje: dober (rabljeno), Multi-function punch, punch press, hole-punch, pneumatic hole punch -pneumatically operated Ihodon Sru Hepfx Adksw

Stanje: dober (rabljeno), Punch, hydraulic punch, hydraulic press, hydraulic press Ihedpeb A H Tajfx Adkow -Sliding-in tool -Width: 290 mm -Length: 550 mm -Height: 260 mm -with hydraulic power unit -control system -foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg