Orkel Mp 2000 nakup rabljenega (11.495)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 29.688 h, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SL, skupna višina: 1.350 mm, skupna masa: 110 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 60.000 W, število osi: 4, This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It is equipped with a single spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers an X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse rates of 75 m/min. Take advantage of this opportunity and purchase this CHIRON Mill 2000 High Dynamics vertical machining center. Contact us for further information about this machine. Additional Equipment • Rated pressure: 200 bar • Test pressure: 260 bar • Temperature range: -10 to 120 °C • Bypass opening pressure: 7 bar • Differential pressure indicator: 5 bar • Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V • Maximum switching current: 1 A • Switching capacity: 70 W • Protection class: IP 65 • Weight: 37 kg • Lubrication: Oil-air • Maximum oil tank temperature for hydraulic fluid: 55°C Machine Benefits Technical Advantages of the Machine • Main spindle max. torque: 75 Nm • Spindle head version: single spindle Additional Information No swiveling spindle head. Cooling device for control unit: Dimensions: 400 mm (W) x 950 mm (H) x 260 mm (D) Set flow rate: 40 l/min; Outlet pressure at 50 Hz: 4.0 bar; Rated power: 1.5 kW; Max rated current: 4.1 A Unit: Dimensions: 600 mm (L) x 600 mm (W) x 1350 mm (H); Weight: 110 kg; Rated connected load: 4.60 kW; Max rated current: 9.20 A; Maximum fuse protection: 16 A Table rotary table: Transport load without counter bearing: 300 kg; Max. axial load: 9000 N; Max. radial load: 40000 N; Max. tilting moment: 2000 Nm; Max. transferable torque from worm to worm gearbox: 30 Nm Ksdsx D Dr Aepfx Adkjlp Counter bearing: Transport load for vertical use with NC rotary table 1.03: 600 kg; Required clamping pressure of the hydraulic fixture (rated pressure): 75 bar; Permissible clamping pressure of the hydraulic clamp: 85 bar; Permissible peak pressure of the hydraulic clamp: 120 bar; Permissible tangential moment with hydraulic clamp: 1000 Nm Dimensions Machine depth: 600 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 10.000 obr/min, obremenitev mize: 4.000 kg, skupna masa: 13.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 3, Ta 3-osna obdelovalna naprava Nicolas Correa Euro 2000 je bila izdelana leta 1997. Opremljena je s krmilnikom Siemens 840 D in elektro vretenom Ganfior s hitrostjo 10.000 min⁻¹. Delovno območje znaša 2000 × 1250 × 700 mm, vreteno ima SK40 stožčasto vpenjalno glavo. Največja dovoljena obremenitev mize je 4.000 kg, sama teža stroja pa 13.000 kg. Če iščete visoko kakovostni rezkalni stroj, razmislite o Nicolas Correa Euro 2000, ki ga ponujamo v prodajo. Tehnične specifikacije Velikost stožca: SK 40 Ksdpfeyctpiox Adkolp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar Kjdpfxoyf Htye Adkelp • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, proizvajalec krmilnikov: MITSUBISHI, število osi: 3, Ta 3-osni stroj MORI SEIKI NL 2000 SY/500 je bil izdelan leta 2005. Gre za horizontalni stružni stroj z BF-vmesnikom in pogonskimi orodji ter menjalnikom orodij na obeh vretenih. Če iščete visoko kakovostne stružnice in rezkalne stroje, razmislite o stroju MORI SEIKI NL 2000 SY/500, ki ga imamo na voljo za prodajo. Kontaktirajte nas za več informacij. Prednosti stroja Tehnične prednosti stroja • Pogonska orodja so priložena • Nastavitev orodij na obeh vretenih Dodatne informacije Stroj je še vedno priključen na električno omrežje. Klodpfxoyaim Ej Adkop

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 22.491 h, največja hitrost vretena: 1.800 obr/min, potovalna razdalja osi X: 410 mm, moč vretenovega motorja: 37.000 W, skupna višina: 1.930 mm, skupna širina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 4.250 mm, število osi: 2, Horizontal lathe from 2008. The Weiler E70 / 2000 features a swing-over bed of 720 mm and a maximum workpiece weight of 2,500 kg. It is equipped with a steady rest, tailstock, and faceplate, making it highly versatile. With a spindle speed range of 1 – 1,800 rpm and a robust main drive power of 37 kW, this machine is designed for precision. If you are looking for a high-quality lathe, you should consider the Weiler E70 / 2000 that we are offering for sale. Contact us for further details. • Working area and capacities: • Swing over bed: 720 mm • Swing over cross slide: 430 mm • Centre height: 360 mm • Distance between centres: 1,000 / 2,000 / 3,000 / 4,000 / 6,000 mm • Bed width: 480 mm • Maximum workpiece weight (unsupported): 2,500 kg • Maximum workpiece weight (with steady rest): 3,800 kg • Spindle and headstock: • Spindle bore (standard): 106 mm • Spindle bore (options): 128 / 165 / 216 / 262 / 317 mm • Spindle nose: DIN 55027 size 11 • Maximum spindle torque: 3,150 Nm • Feeds and travels: • Z-axis rapid traverse: 10,000 mm/min (10 m/min) • X-axis rapid traverse: 5,000 mm/min (5 m/min) • Feed force (Z): 20,000 N • Feed force (X): 10,000 N • Tailstock: Kljdpfxoyn Nxke Adkjp • Quill diameter: 115 mm • Quill stroke: 225 mm • Taper: MK 6 (Morse taper) • Thread cutting capabilities: • Metric threads: 0.1–400 mm • Inch threads: 1/4–56 TPI • Module threads: 0.125–28 mm • DP threads: 1–224 DP • Operating hours: 22,491 h Additional equipment: • Steady rest • Tailstock • Faceplate

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Klodox D D Ikepfx Adkop Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 6.235 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 255 mm, pomik osi Y: 120 mm, pomik po osi Z: 800 mm, moč vretenovega motorja: 22.000 W, skupna masa: 11.600 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 18i-TB, kot vrtenja osi C (maks.): 360 °, število osi: 3, This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a swing diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control, it offers spindle speeds up to 5,000 rpm and is fitted with a 12-position turret. Take advantage of this opportunity to purchase the DAEWOO PUMA TT 2000 SY horizontal lathe. Contact us for further details about this machine. Additional Equipment • Probe: Tool measurement probe • Automatic bar feeder: ILS-RBK10016 L 2265 mm, W 1116 mm, approx. 490 kg • Bar feeder max. material length/diameter: 1,600 mm / 5–65 mm • Short bar magazine feeder with servo drive • Main and sub spindle with power chuck D = 250 mm • Fully enclosed work area—safety guarding in compliance with accident prevention regulations • Memory card interface, RS-232 port • Tool load monitoring, bed flushing • Workpiece air blow-off function • Automatic tool measurement probe // Driven tools on both turrets Machine Advantages Technical machine advantages • Chuck size (both spindles): 250 mm • Clamping force (both spindles): hydraulic, 5–40 bar • Max. turning diameter: approx. 390 mm / approx. 315 mm • Max. workpiece length: 740 mm • Max. bar diameter: 65 mm • Total power requirement: 75 kVA / 11 kW with transformer • Regular maintenance has been performed. Additional information Additional equipment Coolant system, chip conveyor, automatic parts catcher with conveyor belt, numerous accessories Technical documentation and installation plan available Tooling Turret: BTM65 Driven tools: Yes Tool load monitoring: Yes Tool holder diameter: 40 mm Motor for driven tools: 7.5 kW Collet size for rotary tools: ER32 (D=3–20 mm) Kedpsx D H Tcofx Adkjlp Max. speed for rotary tool: 4,000 rpm Dimensions Machine depth: 4,100 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, širina mize: 550 mm, dolžina mize: 2.600 mm, največja hitrost vretena: 12.000 obr/min, število osi: 4, To vertikalno obdelovalno središče CHIRON MILL 2000 je bilo izdelano leta 2003. Opremljeno je s krmiljem Siemens Sinumerik. Stroj ima hitrost vretena 12000 min⁻¹. Dodatna oprema • Transporter za ostružke Prednosti stroja Tehnične prednosti stroja Klodjyi Eh Djpfx Adkjp • Hitri pomik 40 m/min • Zaloga orodij s kapaciteto za 24 orodij

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It is equipped with a TRUMPF TruDisk 6002 laser, offering a power range of 120-6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, which enhances its operational flexibility. If you are looking for a high-quality welding system, you should consider the KUKA KR 100-2 HA 2000 machine, which we offer for sale. Please contact us for more information about this machine. Machine advantages Technical machine advantages • Weight (kg): 1202 • Laser output at the workpiece: 6000 W / Typical power stability at rated power: ±1% with active power control / Continuously adjustable power range: 120 to 6000 W / Beam quality at fiber coupling input: 8 mm / Numerical aperture at output coupling after fiber delivery: 0.1 / Wavelength: 1030 nm / Minimum laser light cable diameter: 200 µm / Maximum number of laser light cables: 2 / Maximum number with extended device size: 4 / Ambient temperature: 10-50 °C • Mounted on KSL-2000/2700 linear unit (4 meters) / TRUMPF TruDisk 6002 laser / Various shielded gas welding units with controls Kedpfx Adox D Np Hekslp

Leto izdelave: 2025, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 700 kg, skupna dolžina: 3.500 mm, skupna širina: 1.100 mm, skupna višina: 1.500 mm, delovna dolžina: 2.500 mm, številka stroja/vozila: 0100-0149-2024, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Z oddajo ponudbe se zavezujete k pravočasnemu prevzemu: bodisi med 11.05.2026 in 13.05.2026 bodisi med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Delovna dolžina: 2.500 mm Klsdsym Di Ijpfx Adkep PODROBNOSTI STROJA Dimenzije in teža Dimenzije (D x Š x V): 3.500 x 1.100 x 1.500 mm Teža: 700 kg OPREMA Primerno za ploščate materiale Zunanja referenca: Lot 15 / Blickle

Stanje: rabljeno, Leto izdelave: 2000, skupna masa: 60 kg, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Kodex Iwc Eopfx Adkolp

Stanje: novo, Leto izdelave: 2026, Hopper capacity: 40 kg Capacity: Up to 140 onions/min Raw material size: 45 – 140 mm Overall machine width: 1050 mm Overall machine height: 1880 mm Overall machine length: 4830 mm Number of working lanes: 2 Onion loading height: 1000 mm Onion discharge height: 700 mm Waste discharge height: 400 mm Power supply: 3 x 400 V / 50 Hz Installed power: 1.2 kW Compressed air connection: 8-10 bar Air consumption: 1.9 m³/min Noise level: Above 80 dB Frame material: Acid-resistant stainless steel and plastics approved for food contact CE Certificate: Yes Topper: No Kjdpfx Adjd Nimaekolp

Stanje: rabljeno, Leto izdelave: 2004, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.400 mm, CNC HEIDENHAIN iTNC 530 HOD OSI X 6000 MM HOD OSI Y 1400 MM HOD OSI Z (VERTIKALNO) 2500 MM PRITRDITEV VRETENA ISO 50 DIN 69871-B50 OBRATI VRETENA 5000 RPM MOČ MOTORJA S1 37 KW - S6 56 KW AVTOMATSKA INDEKSIRANA GLAVA 1° X 2,5° MENJALNIK ORODIJ Z 40 MESTI NOTRANJE IN ZUNANJE HLAJENJE ODVAJALNIK OSTRUŽKOV Klsdpfoxhqivsx Adkop PRITRDILNA MIZA 8000 X 2000 MM OBODNE ZAŠČITE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Kledpfx Adeyugkweksp Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Four ENGEL injection moulding machines are available: Kedpfx Adeyu T D Dskolp 1) ENGEL ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55 mm, shot volume: 511 cm³, injection pressure: 1616 bar / 2052 bar, nozzle stroke: 350 mm, nozzle contact force: 67 kN, clamping force: 1500 kN, opening stroke: 606 mm, ejector force: 60 kN, ejector stroke: 150 mm, min. mould installation height: 294 mm, platen dimensions X/Y: 750 mm / 520 mm, weight: approx. 9500 kg, control system: CC100, operating hours: approx. 79,000 h. Includes ENGEL HLi automation robot. 2) ENGEL ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22 mm, shot volume: 38 cm³, injection pressure: 1500 bar / 2050 bar, nozzle stroke: 200 mm, nozzle contact force: 28 kN, clamping force: 300 kN, opening stroke: 330 mm, ejector force: 24 kN, ejector stroke: 70 mm, min. mould installation height: 110 mm, platen dimensions X/Y: 550 mm / 380 mm, weight: approx. 2500 kg, control system: CC100, operating hours: approx. 113,300 h. 3) ENGEL ES 2000/250, year of manufacture: 1993, core pulls: 3, injection unit: PVC, screw diameter: 70 mm, shot volume: 1154 cm³, injection pressure: 1400 bar / 1700 bar, nozzle stroke: 450 mm, nozzle contact force: 150 kN, clamping force: 2500 kN, opening stroke: 600 mm, ejector force: 70 kN, ejector stroke: 200 mm, min. mould installation height: 200 mm, platen dimensions X/Y: 910 mm / 910 mm, weight: approx. 16,000 kg, control system: CC90, operating hours: approx. 109,300 h. Includes Wittmann W322 automation robot. 4) ENGEL ES 750/150 HL, year of manufacture: 1998, core pulls: 2, screw diameter: 35 mm, shot volume: 135 cm³, injection pressure: 1060 bar / 1600 bar, nozzle stroke: 200 mm, nozzle contact force: 28 kN, clamping force: 600 kN, opening stroke: 450 mm, ejector force: 40 kN, ejector stroke: 100 mm, min. mould installation height: 150 mm, platen dimensions X/Y: 600 mm / 560 mm, weight: approx. 4700 kg, control system: CC100, operating hours: approx. 108,600 h. Includes ENGEL Angusspicker automation robot. Documentation available. On-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 2000, skupna dolžina: 900 mm, skupna širina: 500 mm, skupna višina: 600 mm, - Leto izdelave: 2000 - Dokumentacija na voljo: Ne - CE-oznaka prisotna: Da - CE-certifikat na voljo: Ne - Serijska številka: 2147964 - Transportne mere: 900mm x 500mm x 600mm (d x š x v) - Število transportnih paketov: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/diferencirano obdavčenje: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega sektorja Yorick Diebels Kodjx Afalopfx Adkolp

Stanje: rabljeno, Leto izdelave: 2000, skupna višina: 1.600 mm, skupna dolžina: 4.300 mm, skupna širina: 840 mm, Price: On request • Year of manufacture: 2000 • Documentation available: No • CE certificate available: No • Serial number: 404 • Number of units: 6 - Unit type 1: - Tools included: Yes - Unit type 3: - Tools included: Yes - Unit type 4: - Tools included: Yes - Unit type 5: - Tools included: Yes - Unit type 6: - Tools included: Yes • Voltage [V]: 400 • Power consumption [A]: 15.8 • Power output [kW]: 10.2 • Transport dimensions: 4300mm x 840mm x 1600mm (L x W x H) • Number of transport packages: 1 Financial Information VAT: The stated price is exclusive of VAT Ksdpfx Aoykafasdkolp VAT/ Margin Scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2000, Lastna teža: 22.000 kg Delovna širina: 1500 mm Delovna dolžina: 2160 mm Debelina pločevine: 2 mm S kompletno nakladalnim sistemom - Letnik izdelave: 2000 - Dokumentacija na voljo: Da - CE-oznaka prisotna: Da - CE-certifikat prisoten: Ne - Serijska številka: 12/50 - Upravljanje: CNC - Moč [kW]: 18,0 - Največja debelina pločevine [mm]: 2 - Največja delovna širina [mm]: 1500 - Opcije: Nakladalni sistem - Transportna teža [kg]: 22.000 kg Finančne informacije: Kodpfjww Eqcjx Adkolp DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkupi so možni kadarkoli za vse industrijske naprave. Lukas van Rossum

Stanje: novo, Leto izdelave: 2024, Proizvajalec: Green Transfo Tip: Minera MP Leto izdelave: 2024, neuporabljeno Na voljo: 9 kosov Nazivna moč: 7000 kVA Klsdpfxevx Tmie Adksp Nazivna napetost: 30 / 0,72 kV Transformatorji se prodajajo zaradi napačnega naročila. Naknadno je bilo ugotovljeno, da so potrebni transformatorji z 33 kV – ponujeni modeli pa so vsak po 30 kV. Zato so zdaj naprodaj. Stanje: Neuporabljeno, popolnoma delujoče, tehnično brezhibno.

Stanje: rabljeno, OKUMA LB 2000 EX je CNC stružnica, zasnovana za visoko natančnost, točnost in zanesljivost. Zmogljivosti: vreteninska odprtina 62 mm; maks. dolžina struženja 300 mm; maks. premer struženja 430 mm; pomiki Z 350 mm, X 260 mm. Tehnični podatki: hitri pomik Z 30 m/min, X 25 m/min; brezstopenjsko območje vrtljajev vretena 50–6000 min⁻¹; priključek 50 Hz 3x 400 V; masa ≈3250 kg; dimenzije D1900׊1750×V1850 mm. Oprema: revolverska glava z 12 pozicijami. Omogoča obdelavo v ozkih tolerancah; tipične industrije: avtomobilska, letalska, medicinska tehnika, urarstvo, strojništvo. Kodjyn Ehbspfx Adkolp

Leto izdelave: 1980, stanje: dober (rabljeno), with pre-bending Technical Data: Bending length: 2000 mm Kjdpfokzg E Ajx Adkolp Max. sheet thickness: 20 mm Pre-bending capacity: 15/11 mm Lower roll diameter: 280 mm Upper roll diameter: 300 mm Main drive power: 16.2 kW Upper roll positioning drive power: 4.8 kW Lower roll positioning drive power: 3.7 kW Weight approx.: 14,200 kg Technical data, accessories, and machine description are subject to change and not binding.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 900 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 520 mm, premer struženja: 372 mm, TECHNICAL DETAILS Swing diameter over bed: 570 mm Max. turning diameter: 372 mm Max. turning length: 520 mm Chuck: 152 mm (203 mm) Spindle speed: 6,000 (45,000) rpm Bore diameter: 60 mm (68 mm) Travel (X/Z): 215 mm / 562 mm MACHINE DETAILS Year of manufacture: 2017 Weight: 4,000 kg Operating hours: 849 h (as of November/December) EQUIPMENT • Control: Siemens Sinumerik 820 D incl. Operate • 3-jaw power chuck • 12-position tool changer with driven tools Kedpfx Aerpiuyodkjlp • Automatic tool measurement • Parts catcher • Programmable tailstock • Oil skimmer • Work area lighting • 2x WTO drilling and milling unit, straight BMT 55 • 2x WTO drilling and milling unit, angled BMT 55 • 1x facing tool holder 25x25 mm • 3x facing and longitudinal turning holders • 4x universal combination holders • Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2022, I am selling an automatic pneumatic crosscut saw Salvamac Salvapush 2000, year of manufacture 2022. Automatic infeed table 6.10 m (pusher system) Outfeed table 3.00 m Total length: 10.50 m Ksdpfxovxbmws Adkslp Optimization with automatic defect detection and automatic cutting pattern programming. Available immediately. CE equipment. Documentation included.

Stanje: dober (rabljeno), Vlečna kljuka, vlečna sklopka, čeljustna sklopka -Proizvajalec: AL-KO, os z zavoro Klsdpfoyvrulox Adkep -Tip: B 2000-4 -Zavora: Tip 3081 A -Zavorni boben: Ø 325 mm, izrez Ø 160 mm / razmak lukenj Ø 205 mm -Dimenzije: glej fotografije -Transportne mere: 1750/660/V340 mm -Teža: 134 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Zapiralna sila: 200 t Premer vijaka: 50 mm Teža izstrela: 359 g Razdalja med vodili V: 570 mm Razdalja med vodili H: 570 mm Prostornina izstrela: 392 cm3 Vbrizgalni tlak: 2000 bar Kljdpeyktgqsfx Adkjp Euromap 67 1x izmetna enota Tip: Horizontalni Pogon: Hidravlični