Optimum D 420 X 1000 nakup rabljenega (130)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic chuck for securing the workpiece with automatic demagnetizing function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Counter-guides coated with Turcite-B for high wear resistance and low friction • Grinding spindle with high-precision bearings • Grinding wheel can be dressed directly on the machine using a built-in dressing fixture • Digital position display • Machine base made from a robust, torsion-resistant cast-iron frame for maximum rigidity and stability • Longitudinal, cross, and vertical guides are backlash-free and self-centering, designed as V-flat ways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are hand-scraped for the highest precision in all manual movements • 24V DC safety electrical system • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for significantly easier operation • Separate hydraulic unit with heat exchanger reduces vibration and thermal load • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduced energy consumption for substantial cost savings Dimensions and Weight Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1,450 rpm Run-out accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Scope of Delivery Digital position display Coolant system Balancing arbor Grinding wheel grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Equipment Electromagnetic chuck Table enclosure splash guard Demagnetizing device Knedpsxyhvkjfx Ah Ajf Parallel dressing fixture ✔ Coolant system 125 W Work lamp LED Leveling feet ✔

Stanje: novo, Leto izdelave: 2025, For delivery times and current daily prices, please inquire directly. Industrial motor Quiet-running spindle thanks to new spindle design Machine operation with safety electrics in 24V DC Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle Forward/reverse operation Precision spindle bore Kjdsq T Ruhepfx Ah Asnf Operator panel with user-friendly, dirt- and water-resistant membrane keypad Speed display Separate emergency stop pushbutton Tapping function Precisely machined, robust drill table with diagonally arranged T-slots and all-round coolant channel, tiltable sideways by ±45° and rotatable 360° Digital depth gauge Integrated LED machine light in the drill head V-belt guard with safety switch Thick-walled steel column for high load capacity and stability Massive, large-dimensioned base plate with T-slots Heavy-duty construction throughout the entire machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Splošni podatki Teža stroja: 4350 kg Višina: 2310 mm Globina: 1950 mm Dimenzije Dolžina stroja: 3000 mm Glavni pogon Število osi: 3 Hitrost vretena: 10.000 /min Moč motorja vretena: 9 kW Pomiki Pomik osi X: 760 mm Pomik osi Z: 460 mm Kodpfx Ahex H U Eue Asnf Pomik osi Y: 440 mm Orodja Maksimalna teža orodja: 8 kg Ta troosni stroj Optimum Optimill F150 je bil izdelan leta 2017 in je opremljen z nadzornim sistemom Siemens Sinumerik 828D, vertikalnim vretenom tipa SK40 z razponom vrtljajev 10–10.000/min in karuselnim menjalcem orodij s kapaciteto 16 orodij. Omogoča maksimalno obremenitev mize do 350 kg in je opremljen s polžastim transportnim trakom za odrezke. Če iščete stroj za visoko kakovostno rezkanje, priporočamo Optimum Optimill F150 iz naše ponudbe. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: novo, Leto izdelave: 2025, Heavy-duty design for the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency stop hammer switch Drilling depth stop LED machine light integrated in the drill head Precisely manufactured, stable drill table with diagonally arranged T-slots and all-round coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt cover with safety switch Precision spindle bore Machine operation safety electrics: 24 V DC Knjdpfx Asg Uaiush Asf Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high load capacity and stability Heavy-duty, large base plate with T-slots Dimensions and Weights: Column diameter: 92 mm Length approx.: 945 mm Width/depth approx.: 485 mm Height approx.: 2040 mm Weight approx.: 162 kg Drilling Capacity: Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 25 mm Drill Table: Working surface length: 355 mm Working surface width: 355 mm T-slot type: diagonal T-slot size: 14 mm Number of T-slots: 2 Rotation: 360° Tilt: 45° Spindle-to-table distance max.: 784 mm Speed Range: Speed range: 120 – 1810 rpm Number of speed ranges: 9 Electrical Data: Connection voltage: 400 V Line frequency: 50 Hz Machine Base: Spindle-to-base distance max.: 1470 mm Working surface length: 230 mm Working surface width: 300 mm T-slot size: 16 mm Number of T-slots: 2 Spindle: Quill stroke: 125 mm Spindle mount: MT 4 Throat depth: 270 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Manufacturer: Optimum Year of manufacture: 2024 Condition: As new, workshop-tested Knodjxykniopfx Ah Aef Delivery time: Immediately available Technical specifications Centre height: 165 mm Centre distance: 830 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 208 mm Turning length in bed gap: 430 mm Spindle speed ranges: 16 steps, 70–2000 rpm Drive motor: 1.5 kW, 400 V, 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore: 38 mm Spindle taper: MT5 Tailstock taper: MT3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Threads and feeds Metric: 0.4–7 mm/rev (26 threads) Inch: 56–4 TPI (34 threads) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Cross feed: 0.014–0.38 mm/rev (32 feeds) Equipment: Fixed steady rest (Ø 6–50 mm) Travelling steady rest (Ø 8–30 mm) LED machine lamp Reducing sleeve MT5/MT3 Two fixed centre points MT3 4-way tool post 16 mm Change gear set Machine base Initial fill with quality oil Operating tools

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 2.440 obr/min, hitrost vretena (min.): 200 obr/min, skupna višina: 1.725 mm, zmogljivost vrtanja: 25 mm, premer stebra: 80 mm, skupna širina: 410 mm, skupna dolžina: 750 mm, širina mize: 308 mm, dolžina mize: 308 mm, poteza s peresom: 209 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, Razstavni stroj kot nov Letnik 2019 - Težka izvedba celotnega stroja - Visoka mirnost teka zaradi nove zasnove vretena - Industrijski motor - Ločen stikalo za izklop v sili - Digitalni merilnik globine - LED strojna luč integrirana v glavo vrtalke - Natančno obdelana, stabilna vrtalna miza z diagonalnimi T-utorji in obvodnim hladilnim kanalom - Vrtalna miza nagibna ±45° in vrtljiva 360° - Pokrov klinastega jermena z varnostnim stikalom Knsdpfoxrz Dfex Ah Aof - Precizna izvrtina vretena - Upravljanje stroja z varnostno elektroniko pri 24 V enosmerne napetosti - Zagotavljena natančnost kroženja ≤ 0,02 mm, merjeno na vrtalnem vretenu - Debelostenski jekleni steber za visoko nosilnost in stabilnost - Masivna, veliko dimenzionirana osnovna plošča s T-utorji

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Na voljo je rezkalni stroj OptiMill MF 4V, skoraj nov, z 100 ur delovanja. Leto izdelave 2017. Hodi X/Y/Z: 800mm/320mm/400mm, brezstopenjska vretena hitrost 9–6750o/min v 8 območjih, z elektronskim nadzorom vrtilne hitrosti. Hod pinole: 127mm. 3-osni digitalni prikaz DPA21. Preklopnik za desni/levi tek. Nastavljive globine vrtanja. Križna miza X/Y 1244mm/230mm, T-utor 16mm. Zaščitni pokrov vpenjalne glave. Naprava za hlajenje. Ročno centralno mazanje. Univerzalni sistem vpenjanja orodij na stisnjen zrak ISO 40. Brezstopenjski pomiki mize po X/Y. Teža: cca. 1200kg. Ogled je možen po dogovoru. Knjdpoxyk Ucjfx Ah Aof

Stanje: novo, Leto izdelave: 2025, For up-to-date prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 4450 mm Width/Depth (product): approx. 1150 mm Height (product): approx. 1650 mm Weight (net): approx. 3000 kg Working Ranges: Centre height: 280 mm Centre distance: 2910 mm Swing diameter over bed: 560 mm Swing diameter in gap: 790 mm Swing diameter over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 1600 rpm Electrical Data: Drive motor power: 7.5 kW Connected voltage: 400 V Mains frequency: 50 Hz Coolant System: Coolant pump power: 125 W Knjdpoq Ukc Rjfx Ah Ajf Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar capacity diameter: 80 mm Tool post mounting height: max. 25 mm Spindle taper: MK 7 Tailstock: Tailstock taper: MK 5 Tailstock quill travel: 180 mm Tailstock quill diameter: 75 mm Threads: Metric thread pitch: 0.2 – 14 mm/rev Number of metric pitches: 47 Inch thread pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Travel: Top slide travel: 130 mm Cross slide travel: 316 mm Bed slide travel: 2710 mm Feeds: Longitudinal feed range: 0.059 – 1.646 mm/rev Number of longitudinal feeds: 35 Cross feed range: 0.020 – 0.573 mm/rev Number of cross feeds: 35 Electrical Connection: Total connected load: 8.5 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optiturn L28 HS CNC lathe - directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe equipped with Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron - High-quality spindle bearing - Emergency stop push-switch - Centralized lubrication system - Reference switches - Maintenance-friendly protective enclosure - Rear maintenance access panel - Safety switch on the front sliding door - Turret positioned behind the turning center (left-hand turning tools) - Linear guides - Software package “SINUMERIK 808D on PC” included (practical training software allowing workpieces to be programmed and simulated offline on a PC; free to download) - Includes two-year SIEMENS warranty Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 3.75 kVA Spindle - Drive motor (S1 operation): 2.2 kW - Torque drive motor (S1 operation): 14 Nm Kedpfx Aew Ebngoh Ajnf - Torque at spindle: 28 Nm - Spindle mount: DIN 6350 A2-3 - Spindle taper: 5C - Spindle bore: Ø 30 mm Coolant System - Coolant pump power: 95 W - Tank capacity: 25 liters Machine Data - Center height: 169 mm - Center distance: 430 mm - Swing over cross slide: Ø 200 mm - Swing over bed: Ø 300 mm Speed Range - Spindle speeds*: 40 - 4,000 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum tool shank size (square): 16 mm - Maximum boring bar diameter: 16 mm Precision - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed Rate - X-axis: 10,000 mm/min - Z-axis: 12,000 mm/min Machine leasing available via Siemens Finance (subject to liquidity).

Stanje: novo, Leto izdelave: 2025, Optimum Optisaw SD 500 Double Miter Metal Band Saw with Swiveling Saw Frame Item no. 3292380 Knodpjgd Si Ejfx Ah Asf Approx. length: 2122 mm Approx. width/depth: 1046 mm Approx. height: 1497 mm Approx. weight: 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Frequency: 50 Hz Machine Data Saw Band Speed(s): 35 / 70 m/min Saw Band Length: 3770 mm Saw Band Width: 34 mm Saw Band Thickness: 1.1 mm Miter Angle: 45 to -60° Feed: Hydraulic via Downfeed Cylinder Saw Frame Lift: Manual Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° upright rectangle (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° upright rectangle (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm +45° upright rectangle (solid): 280 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° upright rectangle (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw frame Supplied as standard with high-quality bi-metal saw blade Micro switch for automatic end-stop Coolant pump Ball bearing saw band guides with carbide plates for optimal cutting results Simple adjustment of downfeed speed via feed control valve on the operator panel Large, quick-release vice, laterally adjustable Clear operator control panel Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj neuporabljena ploščinska brusilka Optimum. Širina brušenja: 220mm, dolžina brušenja: 470mm, višina brušenja: 350mm, dimenzije mize X/Y: 210mm/450mm, maksimalna razdalja med sredino mize in vretenom: 450mm, dimenzije brusnega koluta X/Y/Z: 200mm/13mm/31,75mm. Dimenzije stroja X/Y/Z: pribl. 1200mm/1450mm/2000mm, teža: pribl. 800kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Knjdpfx Ahexx Udle Aef

Stanje: novo, Leto izdelave: 2025, For current prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in bed gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system pump output: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Maximum tool post height: 25 mm Spindle taper: MK 6 Tailstock: Tailstock taper: MK 4 Tailstock quill travel: 130 mm Kodsq Ukbpepfx Ah Asnf Tailstock quill diameter: 60 mm Threads: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 41 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module thread pitches: 34 Travel: Cross slide travel: 125 mm Compound slide travel: 285 mm Carriage travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently in the showroom and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe, directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Areas Chuck diameter: 150 mm Chuck clamping control: Hydraulic Centre height: 223 mm Distance between centres: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Motor Torque X axis: 6 Nm Z axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Chuck passage diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Quill taper: MK 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle mount: DIN ISO 702-1 No. 5 Spindle bore/bar capacity: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tools: 128 Travel X axis: 250 mm Z axis: 760 mm Kedpfx Aew Ea Tuoh Asnf Vertical Spindle Continuous duty drive motor power (S1): 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor S6-30% duty: 80 Nm Feed Rate X axis: 15,000 mm/min Z axis: 15,000 mm/min Feed Force Feed force X axis: 7.5 kN Feed force Z axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool shank height/width (square): 20 x 20 mm Max. boring bar diameter: 25 mm SIEMENS SAFETY INTEGRATED Features Main Spindle - Heavy-duty design Machine Bed - Deeply ribbed - High rigidity and durability Guides - Robust flat bed guideways Ball Screw - For high rapid traverse speeds in all axes - Reduced wear - High positioning and repeatability accuracy Cast Iron Body - Hardened to HRC48-52 and heat-treated Machine Feet - Six pieces - Optimal machine alignment Heat Exchanger - Enclosed control cabinet with intelligent cooling management - Optimal temperature even at high ambient temperatures Tool Changer System - Eight tool stations - Hydraulic VDI30 tool changer - Max. tool shank height: 20 mm Hydraulic Unit - Motor power: 750 W - Tank capacity: 50 litres - Clamping/operating pressure: 2,500 – 2,942 kPa Three-Jaw Chuck - Hydraulic three-jaw chuck Ø 150 mm - Hydraulic unclamping and clamping via foot pedal - Easy clamping of workpieces - Hard and soft top jaws Central Lubrication System - Automatic interval lubrication - Reduces wear on bearings, guides, and ball screws - With float switch: an audible signal sounds if the oil level is too low

Stanje: novo, Leto izdelave: 2025, OPTIturn TU 2004V – Lathe with Stepless Speed Control and Digital Speed Display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed readout Precision Engineering Sturdily ribbed prism bed made of cast steel, induction hardened and precision ground Hardened and ground bed guides Hardened spindle nose (DIN 6350) Guaranteed spindle nose run-out accuracy better than 0.009 mm Automatic longitudinal/lead screw drive Equipped with longitudinal, cross, and compound slides Selectable forward/reverse rotation on control panel Emergency stop button Chuck guard Thrust bearing Leadscrew mounted in two sintered bearings Wide threading range via change gear set Simple and quick speed changes via V-belt Change gear transmission EMC filter class B (approved for domestic use) Ksdpfx Ahecnxrcj Aenf Equipment details: - Digital speed indicator - Easy-to-read digital speed display - Chip guard on compound slide - Four-way tool post, rotatable - Roll-threaded trapezoidal spindle (leadscrew) - Tailstock adjustable for taper turning - Tailstock quill and handwheel with fine adjustable scaling 0.02 mm - Main spindle hardened and mounted in adjustable precision taper roller bearings - Taper roller bearings in P5 quality - Cylindrical centering receiver - Hardened spindle nose with 21 mm spindle bore - Chuck with run-out accuracy better than 0.04 mm Scope of delivery: - 3-jaw chuck Ø 100 mm, self-centering - Fixed centre MK 2 - Fixed centre MK 3 - Splash guard - Chip tray - 4-way tool holder - Change gear set - Operating tools Model: OPTIturn TU 2004V Item No.: 3420310 Technical Data Power supply: 230 V / 1 Ph ~50 Hz Spindle motor power: 600 W Spindle taper: MK 3 Spindle bore: 21 mm Passage of 3-jaw chuck: 20 mm Tool post mounting height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Number of steps: 2, speed electrically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Metric thread pitch: 0.25 – 3 mm/rev (14) Imperial thread pitch: 44 – 8 TPI (12) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Stanje: novo, Leto izdelave: 2025, For information on delivery times and current daily prices, please inquire directly. Dimensions and Weights: Length (product): approx. 1760 mm Width/Depth (product): approx. 745 mm Height (product): approx. 1320 mm Weight (net): approx. 469 kg Max. height (product): approx. 1590 mm (DPA) Working Areas: Center height: 165 mm Center distance: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 216 mm Bed width: 190 mm Speed Range: Number of speed ranges: 9 steps Speed range: 65 – 2000 rpm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: diameter 38 mm Knedpfx Ahjq T R Aas Ajf Max. toolholder height: 16 mm Spindle taper: MT 5 Tailstock: Tailstock taper: MT 3 Tailstock quill travel: 100 mm Tailstock quill diameter: 38 mm Threads: Metric pitch: 0.4 – 10 mm/rev Number of metric pitches: 29 Inch pitch: 56 – 4 TPI Travel: Cross slide travel: 90 mm Compound slide travel: 168 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.02 – 0.4 mm/rev Number of longitudinal feed rates: 24 Face feed range: 0.01 – 0.2 mm/rev Number of face feed rates: 32

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine offered directly by the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and durability. • Column-style cast iron construction for high rigidity • Carousel tool changer with eight tool stations • All linear guides fitted with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) Ksdpfjw Ea Swsx Ah Aonf • Maximum spindle speed 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change operation is automatic or by push button (electropneumatic tool clamping system) • Solid, precise, large milling table with accurate surface finish • Extra-wide access doors to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS warranty extension and free on-site OSS service package included SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override Absolute encoder / no homing required • Higher accuracy Control System • 8.4” LCD color display, 800 x 600 resolution SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and Weights Length approx. 2030 mm Width/Depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Horizontal Milling Table Length: 690 mm Width: 225 mm Vertical spindle – table distance min.: 90 mm Vertical spindle – table distance max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot pitch: 63 mm Maximum table load: 150 kg Accuracy Repeatability: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic Connection Operating pressure: 6 bar Travel X axis (automatic): 330 mm Y axis (automatic): 220 mm Z axis (automatic): 320 mm Spindle-column distance min.: 280 mm Spindle-column distance max.: 280 mm Vertical Spindle Spindle taper: BT 30 Speed range: 10,000 rpm Continuous duty (S1) motor power: 3.7 kW Motor power S6-30% operation: 5.5 kW Continuous duty (S1) motor torque: 24 Nm Motor torque S6-30% operation: 36 Nm Feed Rates X axis: 15,000 mm/min Y axis: 15,000 mm/min Z axis: 15,000 mm/min Feed Motor Torque X axis (continuous S1): 3.5 Nm Y axis (continuous S1): 6 Nm Z axis (continuous S1): 6 Nm Tool Changer Type: Carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool change time (tool-to-tool): 7 s

Stanje: novo, Leto izdelave: 2025, Heavy, robust cast construction High running smoothness due to ground, oil-bath lubricated gearbox gears Right-/left-hand rotation Automatic quill feed with manual fine adjustment Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head swivels ± 60° Adjustable gib strips Heavy-duty hand-scraped dovetail column guide for maximum stability and precision Height-adjustable, large protective shield with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy, large dimension cross table, precisely surface-machined with T-slots and adjustable gib strips Sturdy cast machine base with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 steplessly adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/milling capacity Max. cutter head size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel S235JR): 24 mm Continuous drilling capacity (steel S235JR): 20 mm Electrical data Connection voltage: 230 V Network frequency: 50 Hz Electrical connection Total connected load: 1.5 kW Milling table (horizontal) Length: 800 mm Width: 240 mm Distance vertical spindle – milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Kodpeg U Uv Ujfx Ah Aonf Vertical spindle Reach: 258 mm Spindle mounting: MT 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Swivel range of milling head Z – X plane: ± 45° Quill diameter: 75 mm Quill stroke: 120 mm Location: Available from stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, For delivery times and up-to-date pricing, please enquire directly. Drill Table Working Surface Length: 387 mm Drill Table Working Surface Width: 387 mm Drill Table T-slot Arrangement: diagonal Drill Table T-slot Size: 14 mm Drill Table Number of T-slots: 2 Max. Distance Spindle – Drill Table: 775 mm Speed Range: Speed Range: 70 – 2800 rpm Number of Speed Steps: 9 steps Speed Control: Infinitely variable Electrical Data: Drive Motor Power: 1.1 kW Connection Voltage: 400 V Network Frequency: 50 Hz Machine Base: Max. Distance Spindle – Machine Base: 1300 mm Machine Base Working Surface Length: 270 mm Machine Base Working Surface Width: 327 mm Machine Base T-slot Size: 16 mm Machine Base Number of T-slots: 2 Machine Base T-slot Spacing: 150 mm Knodpfxjq T Rx Ej Ah Ajf Spindle: Quill Stroke: 125 mm Spindle Taper: MK 4 Throat Depth: 270 mm Drilling Head Rotation: 360° Drilling Head Tilt: 45°

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F 80 CNC milling machine, direct from the manufacturer. • Column-type machine bed made of cast iron for high rigidity • Carousel-type tool changer with 12 tool positions • All linear guides equipped with stainless steel covers • Automatic central lubrication system • Siemens main spindle motor • Siemens servo drives on all axes (closed control loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency-stop switch greatly simplifies program setup SINUMERIK 808 ADVANCED CNC technology from the industry leader SINUMERIK 808D on PC • Identical control software package, further simplifying machine operation Compact and Robust • Thanks to its panel-based CNC design with few interfaces and a control panel rated to IP65, the SINUMERIK 808D ADVANCED is perfectly suited for operation in demanding environments Communication Interfaces • Front-panel USB (IP65) • Serial interface RS232C • Rear RJ45 Ethernet port • Technology-specific keyboard layout • Durable hard keys with protective membrane Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid Traverse Speed X-axis: 20 m/min Y-axis: 20 m/min Z-axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 12 kVA Horizontal milling table Length: 800 mm Width: 260 mm Distance vertical spindle – table (min.): 100 mm Distance vertical spindle – table (max.): 550 mm T-slot size: 16 mm Number of T-slots: 5 Distance between T-slots: 50 mm Maximum load: 200 kg Precision Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Knsdpsw Ea Rtjfx Ah Ajf Coolant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X-axis (automatic): 450 mm Y-axis (automatic): 260 mm Z-axis (automatic): 450 mm Distance spindle to column (max.): 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Cont. drive motor power S1: 3.7 kW Drive motor power S6-30%: 5.5 kW Cont. drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X-axis (S1): 6 Nm Y-axis (S1): 6 Nm Z-axis (S1): 11 Nm Tool Changer Type: Carousel Number of tool stations: 12 tools Maximum tool diameter: 95 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Stanje: novo, Leto izdelave: 2025, Optimum Gear-Metal Bandsaw OPTIsaw SD 200V For Demanding Sawing Applications Item number: 3300205 DESCRIPTION - Quiet operation - Robust cast construction - Steplessly adjustable bow descent via hydraulic cylinder with throttle valve - Microswitch for automatic cutoff at end position - Clearly legible scale for angle adjustment - Supplied as standard with high-quality bimetal saw blade - Saw blade tension adjustable from the front by handwheel - Ball-bearing saw blade guide - Sturdy machine base with large wheels and a convenient transport handle for easy relocation of the machine - Adjustable material stop for series cuts - Safety switch for saw blade cover - Fully equipped, allowing the user to start productive work immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Net weight approx.: 130 kg Worktable height: 530 mm Electrical Data Drive motor power: 0.75 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed: 26 – 80 m/min Saw blade length: 2360 mm Saw blade width: 19 mm Saw blade thickness: 0.9 mm Mitre angle: 0 – 45° Ksdpov Sg T Nofx Ah Aenf Feed: Steplessly adjustable Raising of saw bow: Manual Cutting Capacity Cutting range 0° round (solid): 180 mm Cutting range 0° square (solid): 180 mm Cutting range 0° rectangle vertical (solid): 180 x 240 mm / 50 x 300 mm Cutting range +45° round (solid): 110 mm Cutting range +45° square (solid): 150 mm Cutting range +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY Material stop Bimetal saw blade Machine base

Stanje: novo, Leto izdelave: 2025, For delivery times and current daily prices, please inquire directly. Dimensions and Weights: Column diameter: 150 mm Length (product): approx. 880 mm Width/Depth (product): approx. 595 mm Height (product): approx. 2,445 mm Weight (net): approx. 550 kg Drilling Capacity: Drilling capacity in steel (S235JR): 40 mm Continuous drilling capacity in steel (S235JR): 35 mm Thread cutting in steel (S235JR): M30 Drill Table: Drill table work surface length: 530 mm Drill table work surface width: 530 mm Drill table T-slot size: 18 mm Number of drill table T-slots: 3 Drill table T-slot spacing: 125 mm Drill table rotation: 360° Drill table tilt: ± 90° Drill table load capacity: 250 kg Max. distance spindle - drill table: 740 mm Min. distance spindle - drill table: 130 mm Speed Range: Speed range: 30 – 2,430 rpm Number of speed ranges: 4 steps Speed control: electronic Electrical Data: Drive motor power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Kodsq T Ry Uopfx Ah Ajnf Machine Base: Max. distance spindle - machine base: 1,210 mm Machine base work surface length: 435 mm Machine base work surface width: 445 mm Machine base T-slot size: 18 mm Number of machine base T-slots: 2 Machine base T-slot spacing: 150 mm Spindle: Quill stroke: 170 mm Spindle taper: MT 4 Throat depth: 350 mm Automatic quill feed Quill feed rate: 0.1 – 0.2 mm/rev Quill feed speed levels: 3 steps Motor(s): Coolant pump drive motor power: 100 W

Stanje: novo, Leto izdelave: 2024, For information on delivery times and current daily prices, please inquire directly. Dimensions and Weights: Length (product): approx. 1935 mm Width/Depth (product): approx. 780 mm Height (product): approx. 1740 mm Weight (net): approx. 765 kg Working Areas: Centre height: 200 mm Centre distance: 1000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Speed Range: Number of speed ranges: 8 Speed range: 70 – 2000 rpm Electrical Data: Drive motor power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System: Coolant pump power: 100 W Spindle: Tool post: SWH 3-E Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/Bar capacity diameter: 53 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill stroke: 110 mm Knsdoq T R Dmspfx Ah Asf Leadscrews/Threads: Metric pitch: 0.4 – 7 mm/rev Number of metric pitches: 32 Imperial pitch: 56 – 4 TPI Number of imperial pitches: 31 Travel: Top slide travel: 98 mm Cross slide travel: 185 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.014 – 0.38 mm/rev Number of longitudinal feeds: 26 Cross feed range: 0.052 – 1.392 mm/rev Number of cross feeds: 32 Tool Clamping: Toolholder shank size: 16 mm Electrical Connection: Total connected load: 3.0 kW

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Knjdjrah S Hspfx Ah Aof Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2025, For information regarding delivery times and current daily prices, please inquire directly. Condition: New machine Knedsq Ui Tdopfx Ah Aef Center height: 200 mm Distance between centers: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Standard equipment includes: - 3-axis digital readout DPA 21 - Machine base - 3-jaw chuck 200 mm - LED work light - Reduction sleeve MK 4/MK 6 - Fixed center MK 4 - Fixed steady rest - Follow rest - Quick-change tool post base body E - Tool holder ED - Chuck guard, electrically interlocked - Oil filling - Operating tools - Operating manual

Stanje: novo, Leto izdelave: 2025, New machine. Please inquire for the current price and delivery time. Dimensions and Weights: Length (product): approx. 1750 mm Width/Depth (product): approx. 1075 mm Height (product): approx. 1420 mm Weight (net): approx. 550 kg Max. width/depth (product): approx. 1415 mm Max. height (product): approx. 2000 mm Electrical Data: Drive motor power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant pump motor power: 0.05 kW Machine Data: Saw band speed(s): 36 / 72 m/min Saw band length: 2925 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Cutting angle: -45 to +60° Feed: steplessly adjustable Kedpferah R Tjx Ah Ajnf Lifting of saw bow: manual Cutting Ranges: Cutting range 0° round (solid material): 270 mm Cutting range 0° square (solid material): 230 mm Cutting range 0° rectangle horizontal (solid material): 230 x 350 mm Cutting range -45° round (solid material): 230 mm Cutting range -45° square (solid material): 170 mm Cutting range -45° rectangle horizontal (solid material): 140 x 200 mm Cutting range +45° round (solid material): 230 mm Cutting range +45° square (solid material): 200 mm Cutting range +45° rectangle horizontal (solid material): 210 x 220 mm Cutting range +60° round (solid material): 140 mm Cutting range +60° square (solid material): 140 mm Cutting range +60° rectangle horizontal (solid material): 140 x 220 mm