Okuma Lt 200 nakup rabljenega (230)

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Opis: Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. Krmilni sistem: OKUMA OSP-P200MA. Priključna moč: 58 kVA. Pomik v osi X: 1000 mm. Pomik v osi Y: 900 mm. Pomik v osi Z: 1000 mm. Opis: 4 osi. Teža: 26 t. Zasedena površina: 3,3 x 6,5 m. Kapaciteta zalogovnika orodij: 100. Sistem vpenjanja orodij: BT50. Parametri stroja: Dsdsy Ehaispfx Apleut Pomiki v oseh X, Y, Z: 1000 x 900 x 1000 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Technical Machine Advantages Dedpfx Ajx D S Ekoplsut • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: rabljeno, Leto izdelave: 2004, moč: 37 kW (50,31 KM), potovalna razdalja osi X: 1.000 mm, pomik osi Y: 950 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: Okuma, skupna višina: 3.280 mm, skupna dolžina: 6.500 mm, skupna širina: 3.460 mm, širina mize: 630 mm, model krmilnika: OSP-E100M, hitrost vretena (min.): 12.000 obr/min, višina mize: 630 mm, Okuma MA-600 HB Space Center Control: OSP E 100M Pallet dimensions: 630 x 630 mm Number of pallets: 2x X-axis travel: 1,000 mm Y-axis travel: 950 mm Z-axis travel: 1,000 mm Table indexing: 1° Spindle taper: MAS BT 50 Spindle speed: 12,000 rpm Spindle motor: 37/26 kW Tool magazine capacity: 60 positions If you have any questions about the machine or would like to arrange a viewing appointment, please feel free to contact us by phone or email. Take a look at our other listings for a complete overview of our current stock. Dsdey N Afuopfx Apleut

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100277, premer struženja: 340 mm, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 280 mm, pomik osi Y: 120 mm, pomik po osi Z: 500 mm, TEHNIČNI PODATKI X-os: 280 mm Y-os: 120 mm Z-os: 500 mm C-os: 360° (0,0001) Hitrost vretena: 4.500 min⁻¹ Premer vretena: 62 mm Premer vpenjalne glave: 10 palcev PODROBNOSTI O STROJU Krmilnik: OSP U 100 L Teža: 6.000 kg OPREMA Dedpsx I Axrofx Aplsut Pogonska orodja Transporter za odrezke Transformator Priročniki

Stanje: dober (rabljeno), Leto izdelave: 2002, Ref. št.: 10434 Proizvajalec: OKUMA Tip: LC 40 Leto izdelave: 2002 Vrsta krmiljenja: CNC Krmiljenje: FANUC 18-i TB Lokacija skladišča: Halberstadt Država izvora: Nemčija Število vrtljajev: 10 - 2.800 vrt/min Prehod palice: 91 mm Premer vpenjalne glave: 450 mm Premer konjička: 120 mm Premer struženja: 550 mm Dolžina struženja: 800 mm Obodni premer: 800 mm Prehod vretena: 90 mm Vpenjalna glava vretena: A2-8 Duodpfjy Ed Ayex Apljt Pomik pinole konjička: 150 mm Skupna potrebna moč: 44 kW Približna teža stroja: 8 t Število orodnih postaj: 12 kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 1.000 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.100 kg, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 24, število osi: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal lathe we have for sale. Contact us for further details. • OKUMA OSP P200L control system • OSP-P200 control • 12-station radial tool turret • Turret with 12 stations • Number of turrets: 2 • Toolholder: BMT 60 • Number of tools: 24 • Power of driven tool stations: 7.1 kW • Torque of driven tool: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Y-axis travel: mm (unspecified) • X-axis travel: 200 mm • Z-axis travel: 1000 mm • Hydraulic Y-axis clamping • Sub-spindle with W-axis • Twin-spindle configuration • Main spindle bore: 110 mm • Spindle bore approx. 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 4200 rpm • Main spindle drive: VAC 22/15 kW • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 360 mm • Programmable chuck pressure (2 stages) • Thread milling interpolation X/Y and Z/Y axes • Programmable workpiece ejector • Chip conveyor with integrated coolant tank • Heavy-duty paper band filter system • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction nozzle diameter: 200 mm • Hollow clamping cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Clamping range: 42-100 mm • Manual collet change device • Sub-spindle stroke: 150 mm • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor: PVC with PU coating • Hydraulic clamping cylinder: 52 mm bore • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: approx. 6100 kg • Maintenance contract: yes • Utilization: 60% Duedpey Ddtvefx Aplot Additional Equipment • Bar feeder • Optionally, for an additional charge: approx. 200 tools available, collets, power tools Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 1.670 mm, pomik osi Y: 505 mm, pomik po osi Z: 190 mm, skupna višina: 2.950 mm, skupna širina: 2.960 mm, skupna masa: 13.700 kg, največja dolžina izdelka: 5.110 mm, število osi: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a center distance of 1500 mm. The machine is equipped with a powerful main and sub spindle, both reaching a spindle speed of 3,800 rpm and a milling spindle speed of 12,000 rpm. If you are looking for top-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill center that we are offering for sale. Please contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, helical interpolation • Distance between centers: 1500 mm • Maximum swing diameter over covers: 550 mm • Maximum turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" large bore • Sub spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3,800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 Dsdpey Ddiwsfx Aplsut • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with live tooling • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 increments • Coolant/pump pressure: 15 bar • Operating hours (as indicated): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 925 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 600 mm, obremenitev mize: 600 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.000 W, število osi: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features an impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking for high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining center we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max. workpiece dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Distance between table and spindle: 60 - 660 mm • Rapid traverse (X/Y/Z): 50 m/min • Maximum feed rate: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X-Y-Z optical scales • Operating hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-Axis Super-NURBS Kit, Centering Tool Programming, Tool Length Compensation, DNC-DT Interface, Tool Orientation Command Additional Equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe Dusdsy Dc Nijpfx Aplot • 5-axis calibration set • Coolant shower • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper size BT 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.200 obr/min, potovalna razdalja osi X: 350 mm, pomik po osi Z: 920 mm, moč vretenovega motorja: 40.000 W, skupna višina: 2.600 mm, skupna širina: 2.600 mm, skupna masa: 13.500 kg, največja dolžina izdelka: 5.200 mm, število mest v zalogovniku orodij: 22, število osi: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It offers a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two turrets providing a total of 22 tool stations and operates at a spindle speed of 3200 rpm. If you are looking for a high-quality lathe, consider the Okuma LU35-M horizontal lathe we have for sale. Please contact us for further details. • Maintenance contract: Yes • Utilization: 85% • Shifts: 2 • Number of tools: 12 • Number of turrets/magazines: 2 • Maximum turning diameter: 550 mm • Control system: OSP-P200L • Turret A: 12 stations • Turret B: 10 stations • Spindle bore: 90 mm • Supply voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated capacity: 53.1 kVA • Full load current: 76.7 A • Maximum motor current: 134 A • Interrupting capacity: 10 kA Dodpfx Apoy A Ibhjlsut • X-axis travel (turret A): 350 mm (corresponds to max. Ø700 mm) • X-axis travel (turret B): 240 mm (corresponds to max. Ø480 mm) OPTIONAL at extra cost: approx. 100 x tools, clamping elements, jaw sets, 2-jaw chucks, zero-point clamping system Electrical maintenance was carried out 1.5 years ago, during which several electrical components were replaced or cleaned. Technical Specification • Counter spindle: No • Driven tools: Yes • Taper size: VDI 50

Stanje: rabljeno, Horizontal machining center, 6 pallets, OKUMA MA40 HAT 6P, OSP U100M CNC, 6 pallets, 400 mm x 400 mm, max. 400 kg, max. workpiece dimensions 600 x 710 mm. Spindle: BT40 / through-spindle coolant. 4th axis: 1° indexing. Tool changer: 100 positions. 200 tool holders available. Travels: X = 560 mm, Y = 610 mm, Z = 560 mm. Rapid traverse: 40 m/min. Installed and powered on at Mimu Machine Tools (Italy). X travel: 560 mm Number of pallets: 6 Pallet size: 400 x 400 mm Duedpfx Apet Ek Slelet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 32.760 h, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 660 mm, pomik po osi Z: 660 mm, skupna višina: 3.300 mm, skupna širina: 5.800 mm, obremenitev mize: 1.500 kg, skupna masa: 11.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 22.000 W, število mest v zalogovniku orodij: 48, teža orodja: 8.000 g, največja dolžina izdelka: 3.000 mm, število osi: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features travel distances of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine comes with a table size of 1530 x 660 mm and a maximum table load of 1,500 kg. If you are seeking high-quality machining capabilities, you should consider the Okuma MB66-VA vertical machining centre we have available for sale. Contact us for further details. • Maintenance contract: Yes • Condition: An electrical maintenance was performed approximately 1.5 years ago; some electrical components were replaced or cleaned (guides, linear axes, geometry) • Utilization: 70% • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) • Spindle speeds: 8,000 / 12,000 / 15,000 rpm • Magazine capacity: 20 standard (optionally 32 or 48) • Number of turrets/magazines: 1 Dujdpfxey Ama No Apljt • Maximum tool length: 300 mm • Maximum tool diameter: 125 mm • Rated voltage: 400 V • Number of phases: 3 • Frequency: 50 Hz • Maximum power consumption: 42.6 kVA • Total current draw: 61.5 A • Maximum motor current: 112 A • Short-circuit withstand capacity: 15 kA • Voltage: 200 VAC, 50 Hz, 3~ • Control voltage: 24 VDC • Power: 9 kW • Weight: 50 kg Additional equipment • Optional: Zero-point clamping plate for table 1530 x 660 mm available at extra cost • Optional: Approx. 530 tools available at extra cost Technical Specification Taper size: SK 40

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Year of manufacture: 2001 Dedpfx Ajk Hz Iwsplsut 2-axis CNC lathe with robotic loading Description: 2-axis (X-Z) lathe for short workpieces, equipped with a robotic workpiece magazine X-axis travel: 180 mm Z-axis travel: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Krmilnik OKUMA OSP-P300M Velikost mize: 1300 x 560 mm Maksimalna obremenitev mize: 900 kg Pomik v osi X: 1050 mm Pomik v osi Y: 560 mm Pomik v osi Z: 460 mm Hitrost vretena: 12.000 min⁻¹ Vpenjalni stožec: SK50 Magazin: 32 mest Potreba po električni moči: 22,2 kVA / 400V Skupna teža: 7700 kg Dimenzije (D x Š x V): 2900 x 2450 x 2900 mm Dodatna oprema, oprema - Transporter za odrezke - Hladilni sistem Duodpoyvr N Njfx Apljt - Transformator - Nekaj vpenjalnih prijemal s privijačnimi vijaki - Hladilnik vretena - Dvižne kljuke - Priročniki Stroj se prodaja zaradi zaprtja podjetja.

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 01224, premer struženja nad prečnim suportom: 520 mm, stružna dolžina: 750 mm, premer struženja: 380 mm, izvrtina vretena: 60 mm, največja hitrost vretena: 3.500 obr/min, hitrost vretena (min.): 20 obr/min, skupna masa: 5.000 kg, Premer palice (maks.): 60 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, CNC upravljalnik Fanuc 10 TF Premer struženja 380 mm Premer nad posteljo 520 mm Dolžina struženja 750 mm Revolver z 12 pozicijami Hitrosti vretena 20 - 3500 obr/min Vpenjalna glava vključno z utrjenimi in mehkimi čeljustmi Duedpfoy Irfzsx Aplot Konjiček Vključno z različnimi nosilci za orodje Nov monitor: ploski zaslon Letnik izdelave 1987 Stroj je pod napetostjo Na voljo so podatkovni list, dokumentacija in knjige Prenos podatkov z uporabo prenosnega računalnika

Stanje: rabljeno, Leto izdelave: 2000, Maksimalni premer struženja: 800 mm Maksimalna dužina struženja: 800 mm Stezna glava: bez Dokumentacija: uključena Upravljački sistem: Okuma OSP Opseg obrtaja: 10-2800 o/min Prečnik šipke: približno 91 mm Nosač vretena: A2-8 Snaga: 44 kW Prečnik stezne glave: oko 450 mm Revolver: 12 pozicija Konjić: oko 150 mm Težina mašine: oko 8 t +++++ Dodoh D Anaspfx Apljut Molimo da obratite pažnju da je mašina u demontiranom i spremnom za utovar stanju. Zbog toga demonstracija pod naponom ili izrada video snimka nisu mogući. Naš oglas sadrži najreprezentativnije fotografije najvišeg mogućeg kvaliteta. Slanje dodatnih slika, nažalost, nije moguće. +++++

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 565 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 3.900 mm, število osi: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a center distance of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45-5000 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LB3000 EX horizontal lathe that we are offering for sale. Contact us for further details. • OSP-P200 control system Djdpfx Ajy Aaxreplsut • 12-station radial tool turret • Turret with 12 driven tools • Number of turrets: 1 • BMT 60 toolholders • Number of tools: 12 • Number of available tools: approx. 200 • Power at driven tool stations: 7.1 kW • Driven tool torque: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Sub spindle with W-axis • Main spindle bore: 110 mm • Spindle bore: 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 45-5000 rpm • Main spindle drive: 22/15 kW • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 340 mm • Center distance: 1020 mm • Programmable chuck pressure (2-stage) • Thread milling interpolation X/Y and Z/Y axes • Programmable parts catcher • Chip conveyor with integrated coolant tank • Heavy-duty paper band filter unit • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction port diameter: 200 mm • Hollow clamping cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range: 42-100 mm • Manual collet change device • Sub spindle stroke: 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor PVC with PU coating • Hydraulic clamping cylinder bore: 52 mm • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: 4000-6000 kg • Maintenance contract: yes • Utilization: high OPTIONAL at extra cost: Approx. 200 tools available The electrical maintenance was carried out 1.5 years ago. During this, some electrical components were replaced or cleaned. Technical Specification: Counter Spindle: No Driven Tools: Yes

Stanje: rabljeno, Leto izdelave: 2005, CNC Horizontal Machining Center OKUMA MA-400H (Year 2005) Condition: Good, the machine is connected and can be inspected under power. Manufacturer: OKUMA Corporation (Japan) Duedpsxql Daefx Aplst Model: MA-400H Year of manufacture: 2005 Configuration: Supplied with Tsubakimoto / Mayfran Inc. chip conveyor and a complete assembly system. High-quality CNC horizontal machining center designed for precise milling, drilling, and tapping of metal components. An excellent choice for series production where performance, precision, and reliability are required. Main technical specifications: (According to OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Travel (X / Y / Z): 560 × 560 × 625 mm Table size: 400 × 400 mm (two-pallet changer) Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Cooling: integrated cooling system Approximate weight: 11,000 kg Application: The OKUMA MA-400H is designed for machining medium and high-precision components in the automotive, mold, tool, machinery, and metal industries. Ideal for versatile machining operations – with automatic pallet changer, it allows for unmanned operation. If you have any further questions, we will be happy to answer them.

Stanje: rabljeno, Leto izdelave: 2005, For Sale: CNC Machining Center OKUMA ACE CENTER MD-56VA (Year 2005) Condition: Good, technically sound. Manufacturer: OKUMA Corporation (Japan) Model: ACE CENTER MD-56VA Year of Manufacture: 2005 Reliable vertical CNC machining center designed for precise milling, drilling, and tapping of metal parts. OKUMA is one of Japan’s most renowned manufacturers, known for the precision and durability of its machine tools. Main technical specifications: (based on MD-56VA model data) Control: OKUMA OSP-E100M Travel ranges: X = 1050 mm / Y = 560 mm / Z = 460 mm Duodpfxjxp Utbs Aplst Table size: 1300 × 560 mm Max. table load: 800 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15/11 kW (continuous/nominal power) Power supply: 400 V / 50 Hz Cooling system: integrated Approximate weight: 7,000 kg Application: The OKUMA MD-56VA CNC machining center is intended for high-precision production of metal components, including: - Mechanical parts - Molds and tools - Machining of aluminum, steel, or non-ferrous metals Ideally suited for precision manufacturing, small and medium series where accuracy and repeatability are essential. If you have any further questions, we will be happy to answer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP E-100M, število osi: 4, To 4-osno horizontalno obdelovalno središče Okuma MA-600HB je bilo izdelano leta 2005. Idealno za zahtevne obdelovalne naloge, odlikuje ga robustna konstrukcija in natančnost. Razmislite o možnosti nakupa tega horizontalnega obdelovalnega centra Okuma MA-600HB. Za več informacij nas kontaktirajte. Dodatna oprema • Balluf bralno/pisalna enota • Renishaw MP10 • 30 barov hladilne tekočine • Mayfran Consept 2000 Prednosti stroja Tehnične prednosti stroja • NC-miza (natančnost 0,001 stopinje) • ATC s 320 mesti (80 mest za 600 mm orodja) Dsdex D Nlzopfx Apljut • Kontrola preloma orodja • MOP-kontrola orodij Dodatne informacije Stroj je še vedno priključen na električno omrežje

Stanje: rabljeno, Leto izdelave: 2008, CNC stružnica Okuma LB3000 EX letnik 2008 z gnanimi orodji in krmilnikom Okuma OSP-P200L Duodpfxey Dr I Ij Aplet Maks. premer struženja: ø340 mm. Maks. dolžina struženja: 1.000 mm. Premer nad posteljo: 580 mm. Premer nad suportom: 470 mm. Premer vretena: ø80 mm. Kapaciteta vretena: ø120 mm. Hitrost vretena: 45–5.000 vrt/min. Os Z: 1.065 mm. Os Y: 260 mm. Revolver: 12 postaj (vse gnana orodja). Hitrost gnanih orodij: 45–6.000 vrt/min. Os C: 360° indeksiranje. Konica: MT5. Moč vretena: 22 kW. Serijska št.: 141960 (2008) Teža stroja: 6.150 kg. Skupne mere (D x Š x V): 3.500 x 1.900 x 2.000 mm. Vključen transporter za odrezke: pribl. 4.700 x 600 x 1.500 mm

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 5 MILLING SPINDLE Duodoy Er Hyopfx Aplot - Tool holder: HSK63 - Spindle drive power: 22 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1,250 / 660 / 540 mm - Rapid traverse (X/Y/Z): 40 / 40 / 32 m/min - Feed rate (X/Y/Z): 32 m/min SWIVEL AXIS A - Travel: [degrees] SWIVEL AXIS C - Speed: 1,000 rpm - Travel: 360 degrees TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 48 TABLE - Max. workpiece diameter: 730 x 500 mm - Max. table load: 500 kg - Distance from table to spindle nose: 127 - 660 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Floor space required: 2,940 x 3,367 mm - Machine height: 3,541 mm - Machine weight: 13,000 kg MACHINE HOURS - Power-on hours: 57,114 h - Operating hours: 23,087 h EQUIPMENT - Control: OSP-P200M - Turning option - Coolant tank * with paper filter - Through-spindle coolant supply (IKZ) - Chip conveyor - Oil mist extraction: LOSMA - Spindle cooling - Workpiece probe: RENISHAW TS27R - Tool probe: RENISHAW OMP60

Stanje: dober (rabljeno), Deli, prikazani z roko, niso vključeni. Duodpeyb R Ersfx Aplot

Stanje: dober (rabljeno), Leto izdelave: 2005, Machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005 Control: OSP-E 100 L / Expansion kit “M“ Kit One Touch IGF Milling spindle slide X/Y/Z/B Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axis Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis: 250 mm / ±125 mm Main spindle speed up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 positions, no driven tool stations Lower turret with steady rest, therefore only 9 stations instead of 12 Self-centering steady rest: 35 – 240 mm Milling spindle with infinitely variable B axis (0.001°) Magazine: 80 positions Tool holder: HSK 100 New Forkhardt three-jaw chuck, Ø 400 mm, valued at €12,000 Sub-spindle currently without chuck, equipped with arbor / delivery without arbor Duodpfxjyt Nvte Aplet Enlarged main spindle, 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measuring system Additional measurement system for Y axis Maximum tool length: 450 mm instead of 350 mm Door automation for both doors Chip conveyor Gravity band filter with 900-liter clean tank Frequency-controlled supply pump up to 20 bar Machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable track of the W axis, including all hoses, was replaced. In October 2024, linear guides X/Y/Z were renewed. Works carried out by Okuma: - Machine cleaned - Sheet metal covers dismantled - 8th axis removed - Gantry removed and lifted out of the machine. ATC removed and lifted out. - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New ZA linear guide, including carriages, installed and tightened to specified torque - New ZA ball screw, including bearings, installed - Base plate of the gantry installed and tightened to specified torque, or bolted to the carriages. Lubrication lines connected. - ATC including add-on parts installed and connected - New linear guides for YA and XA installed and tightened to the corresponding torques. New YA ball screw with bearings installed - Gantry installed and lubrication lines connected. XA base plate installed and aligned - 8th axis assembled and aligned - H1 turret assembled - Drive motor of the 8th axis installed - 8th axis plus new H1 installed and geometry set - Functional test of 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and defect report for OEG created - Left door installed, various sheet metals adjusted - Power chuck installed - Zero points adjusted - Tool change checked

Stanje: rabljeno, Okuma LB400 Dedpfx Aoy Apq Rjpljut

Stanje: rabljeno, Okuma LB45 Dsdpsy Apqqsfx Aplsut