Okno Tip Elektromat nakup rabljenega (17.900)

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 800 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, sila umika: 270 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Sliding Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + cushion) working principle for high-tonnage metal forming, deep drawing, and spinning applications. The H-frame structure with 8 sliding guides ensures high rigidity, stable parallelism, and long die life even with large table sizes during pressing operations. The CHSP 800/270 model, featuring an 800-ton main ram and a 270-ton cushion capacity, has been developed specifically for processes in automotive, white goods, defense industry, and heavy sheet metal forming that require controlled material flow. The steel construction frame stress-relieved by vibration provides long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, H-frame body with 8 sliding guides • Frame structure with vibrational stress relief • Bronze Zr14 sliding bearings • Welding applications certified by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring hydraulic oil temperature and system status via screen • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, H-frame body with 8 sliding guides Frame Material: St52 – ERDEMİR Sliding Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Cushion): 270 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Gtedpfx Aex N Uh Uofqst Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 200 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting design for controlled material flow in sheet metal forming, deep drawing, and forming operations. The 8-gibbed H-frame construction ensures maximum rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently along the full stroke length. The CHSP 600/200 model, featuring a 600-ton main ram and a 200-ton lower blankholder (cushion), is designed to provide full control over both die and workpiece during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 gib bearings - WPQR and WPS certified welded construction with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electrically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Integrated safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-gibbed H-frame Frame Material: St52 – ERDEMİR Gib Bearing: Bronze Zr14 Capacity (Ram): 600 Ton Capacity (Cushion): 200 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress-relief Welding Process: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017, Supervised by certified “welding coordination engineers” as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø550 mm – Ck45 Cushion Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5900 mm Approximate Press Width: 3250 mm Godpfx Afex N Uhzsqott Approximate Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 35 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 175 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Sheet Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet forming, deep drawing, and metal forming applications. Thanks to its 8-gib H-frame structure, maximum rigidity is maintained throughout the pressing cycle; parallelism and perpendicularity tolerances are stably maintained over the full stroke. The CHSP 500/175 model is designed to provide precise control over dies and workpieces in high-tonnage deep drawing and forming applications, with a 500-ton main ram and a 175-ton cushion (blankholder) capacity. The frame construction is stress-relieved by vibration to ensure durable and reliable operation over a long service life. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press body - Vibration stress-relieved frame structure - Bronz Zr14 slideway bushings - Welded manufacturing certified with WPQR and WPS approvals accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - On-screen monitoring for hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-gib H-frame press structure Frame Material: St52 – ERDEMİR Slideway Bushings: Bronze Zr14 Capacity (Ram): 500 Tons Capacity (Cushion): 175 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Minimum Daylight: 100 mm Maximum Daylight: 1100 mm Stress Relief: Vibration stress-relieving Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1:2017 (Welding applications are supervised by welding coordination engineers certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Fast Ram Down Speed: 150 mm/s Ram Forming Speed: 12 mm/s Ram Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø500 mm – Ck45 Cushion Cylinder Bore: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note Godjx N Uhuopfx Afqjtt This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 150 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and 150-ton blank-holder (pot) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The machine frame is stress-relieved using vibration methods, ensuring long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body type - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - Welds certified by TÜRK-AK accredited WPQR and WPS processes (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system Gtsdpfx Asx N Uhhefqst - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 400 tons - Capacity (Pot): 150 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures supervised by "welding coordination engineers" certified to EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Spinning Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Pot Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Pot Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 24 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 100 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming (spinning) applications. The H-frame with 8 slide guides guarantees maximum rigidity during pressing, maintaining parallelism and squareness tolerances consistently over the full stroke length. The CHSP 300/100 model, with a main ram capacity of 300 tons and a blankholder (cushion) capacity of 100 tons, is engineered for high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to provide long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - Oil temperature and hydraulic system status display on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, 8-guide H-frame press body Gtsdpfjx N Uhbox Afqst - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK; EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Forming Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Internal Diameter: Ø390 mm – Ck45 - Cushion Cylinder Internal Diameter: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 4400 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Screen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 80 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and flow forming applications. The H-frame structure with 8 guideways ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and flow forming operations, featuring a main ram capacity of 250 tons and a lower cushion (pot) capacity of 80 tons. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame type press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS approved welding applications by TÜRK-AK accredited sources (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touchscreen operator panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic centralized lubrication system - Electronic filter contamination monitoring - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Capacity (Cushion): 80 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved and TÜRK-AK accredited EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Gtsdjx N Uaqspfx Afqst Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Flow Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 4200 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Ruler: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 40 t, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-slideway H-frame structure, maximum rigidity is ensured throughout the pressing process and parallelism and perpendicularity tolerances are consistently maintained along the stroke. The CHSP 100/40 model is designed for precise deep drawing and spinning operations with a main ram capacity of 100 tons and a cushion (pot) capacity of 40 tons. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-slideway H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Capacity (Cushion): 40 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK EN ISO 15614-1/2017 (Inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø230 mm – Ck45 Cushion Cylinder Inner Diameter: Ø140 mm – Ck45 Auxiliary Accelerating Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Ground: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 9 Ton Production Note Gtodpfx Ajx N T Uyefqjt This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, širina mize: 1.800 mm, dolžina mize: 2.600 mm, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, and metal spinning applications requiring very high tonnage. The 8-guided H-frame structure ensures maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. Gtsdex N T S Eopfx Afqet The CHP 2500 model, with its large table dimensions, multi-cylinder main pressing system, and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame body type - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified by TURK-AK with WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame body type Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relieving Welding Certification: TURK-AK accredited, WPQR and WPS approved, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec. Movable Table Drawing Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6500 mm Approximate Press Width: 3950 mm Approximate Press Depth: 2600 mm Height of Lower Table from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.000 t, širina mize: 1.500 mm, dolžina mize: 2.500 mm, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type hydraulic presses are developed for heavy-duty forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guideway H-frame construction ensures maximum rigidity during pressing, maintaining parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor structure, is a reliable and long-lasting solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press type • Frame stress-relieved by vibration • Bronze Zr14 guideway bearings Gtjdpfx Afsx N T Sroqjt • Welding applications approved by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • Design and production in accordance with CE standards • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 2000 • Type: Steel construction, 8-guideway H-frame press type • Frame Material: St52 – ERDEMİR • Guideway Bearings: Bronze Zr14 • Capacity (Ram): 2000 Tons • Moving Table Dimensions: 1500 × 2500 mm • Fixed Table Dimensions: 1500 × 2500 mm • Parallelism Tolerance: 120 micron/m • Perpendicularity Tolerance: 60 micron/m • Stroke (Ram): 1000 mm • Min. Daylight: 200 mm • Max. Daylight: 1200 mm • Weld Stress Relief: Vibration stress relief • Welding Certification: EN ISO 15614-1/2017, WPQR, and WPS approved by TURK-AK accredited certification • Max. Operating Pressure: 250 Bar • Total Motor Power: 180 kW – IE3 • Main Pump: 140 cm³ – REXROTH or PARKER • Fast Descent Speed (Moving Table): 150 mm/s • Spinning Speed (Moving Table): 12 mm/s • Return Speed (Moving Table): 170 mm/s • Main Cylinder Bore: Ø720 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approximate Press Height: 6300 mm • Approximate Press Width: 3850 mm • Approximate Press Depth: 2500 mm • Bottom Table Height from Floor: 1500 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Switchgear Components: SIEMENS – SCHNEIDER • Approximate Weight: 95 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.500 t, širina mize: 1.500 mm, dolžina mize: 2.400 mm, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for high-tonnage deep drawing, forming, and heavy-duty shaping applications. Its H-frame structure with 8 guideways ensures maximum rigidity and stability during pressing, helping maintain parallelism and perpendicularity tolerances. The CHP 1500 model provides a reliable solution for the automotive, defense, heavy metal forming, and industrial production lines with its large table dimensions, powerful hydraulic system, and high stroke capacity. The frame is stress-relieved by vibration methods, aiming for long-lasting and stable operation. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Stress-relieved frame by vibration - Bronze Zr14 guideway bearings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1500 Type: Steel construction, H-frame with 8 guideways Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 1500 Ton Moving Table Dimensions: 1500 × 2400 mm Fixed Table Dimensions: 1500 × 2400 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relieving: Vibration method Welding Application: EN ISO 15614-1/2017 WPQR and WPS, TÜRK-AK accredited Max. Operating Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Internal Diameter: Ø620 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height: 6250 mm Approximate Width: 3750 mm Approximate Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Gsdpfx Asx N T R Ujfqjtt Approximate Weight: 70 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.200 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP Series H-type hydraulic deep drawing presses are specially designed for deep drawing, flow forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame design, it delivers maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model provides reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame with vibration technique - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press body Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,200 tons Moving Table Dimensions: 1,500 × 2,000 mm Fixed Table Dimensions: 1,500 × 2,000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Clearance: 100 mm Max. Clearance: 1,100 mm Stress Relief: Vibration stress relief Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding certification Max. Working Pressure: 250 bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,100 mm Approx. Press Width: 3,550 mm Approx. Press Depth: 2,400 mm Lower Table Height From Floor: 1,450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Gtjdox N T Ruepfx Afqst

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.000 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guideway H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long lifespan. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are designed with consideration for heavy industrial environments. The frame and main support structures are stress-relieved via vibration. The Bronze Zr14 slideway bearings provide uniform load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guideways - Vibration stress-relieved frame structure Godpfxjx N T Rbo Afqett - Bronze Zr14 slideway bearings - Welding applications approved by WPQR & WPS under TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 1000 - Type: Steel construction, H-frame press with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding Application: WPQR and WPS approved, certified by TÜRK-AK per EN ISO 15614-1/2017 - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Pressing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø500 mm – Ck45 (2 units) - Auxiliary Fast Forward Cylinders: 2 units - Approximate Height: 6000 mm - Approximate Width: 3450 mm - Approximate Depth: 2400 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 800 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slider H-frame design ensures balanced distribution of high forces generated during pressing, offering maximum rigidity and long-lasting use. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with the demands of heavy industry in mind. The frame and main load-bearing components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise operation throughout the ram movement. ⚙️ Standard Equipment Steel construction, 8-guide H-type press body Stress-relieved frame by vibration Bronze Zr14 slide bearings TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronically monitored filter contamination warning Display of hydraulic unit oil temperature and system status on screen Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relieving Welding: WPQR and WPS certified, EN ISO 15614-1/2017, accredited by TÜRK-AK (welds are supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø390 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height of Press: 6000 mm Approximate Width of Press: 3350 mm Approximate Depth of Press: 2700 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Godpfjx N T Nksx Afqjtt Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with high rigidity, developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guideway H-frame structure provides stable and long-lasting operation by evenly distributing the high forces generated during pressing. The CHP 600 model is designed for reliable performance in manufacturing processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty working conditions. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure precise load distribution and high accuracy throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in conformity with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 - Type: Steel construction, H-frame type with 8 guideways - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 600 Tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Vertical Clearance: 100 mm - Max. Vertical Clearance: 900 mm - Welding Stress Relief: Via vibration - Welding Application: WPQR and WPS accredited by TÜRK-AK, EN ISO 15614-1/2017 certified, supervised by welding coordination engineers certified according to EN ISO 14731 - Max. Operating Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Pot Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Machine Height: 5,900 mm - Approx. Machine Width: 3,250 mm - Approx. Machine Depth: 2,300 mm - Lower Table Height from Floor: 1,400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER Gtedpfsx N T Iajx Afqst - Approximate Weight: 28 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke. ⚙️ Standard Equipment Gjdpfx Asx N T H Aefqett - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components via vibration - Zr14 bronze slide bearings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on display - Cooling system - Offline filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guide H-frame press type - Frame Material: St52 – ERDEMIR - Slide Bearings: Zr14 bronze - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5800 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description Gtjdsx N T Hpjpfx Afqst The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions designed with high rigidity for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 slide guides ensures that high forces generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting and reliable performance for heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operations. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide even load distribution throughout ram movement, which ensures sustained precision over time. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slide guides - Stress-relieved frame and supporting components by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and produced in accordance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration unit - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relief Welding Application: TÜRK-AK accredited WPQR and WPS certified to EN ISO 15614-1/2017 welding practices (certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 1.000 mm, dolžina mize: 1.200 mm, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guided H-frame structure, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium-to-high tonnage production processes. CHP Series – Structural Features Gsdpfxjx N T E Ee Afqett CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved via vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution during ram movement, contributing to long-term precision retention. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved frame and supporting parts - Bronze Zr14 guide bushings - WPQR & WPS approved welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in conformity with CE standards - PLC-controlled hydraulic system - 7'' DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status display - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 300 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress-relieved Welding Procedure: TÜRK-AK accredited and WPQR & WPS certified welding according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 4400 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7'' Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 1.000 mm, dolžina mize: 1.200 mm, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 250 H-Frame Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are highly rigid industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guideway H-frame structure ensures uniform load distribution during pressing, resulting in stable and repeatable operation. The CHP 250 model is engineered to deliver long-lasting and reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are designed with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration techniques. Bronze Zr14 slide bearings provide smooth load distribution during the ram movement, contributing to long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame and supporting components - Bronze Zr14 slide bearings - WPQR & WPS welding applications endorsed by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear and components 📐 Technical Specifications – CHP 250 Type: Steel construction, 8-guideway H-frame body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified (accredited by TÜRK-AK) per EN ISO 15614-1/2017, supervised by qualified welding coordination engineers in accordance with EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Internal Diameter: Ø360 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK Gtedpfxjx N T Elo Afqot PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.000 mm, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Gjdex N T D Uepfx Afqett - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 800 mm, dolžina mize: 1.000 mm, hod: 500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial-grade presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing operations. Thanks to its 8-guide H-frame construction, the press delivers stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-capacity applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial environments. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and long-term stable performance. ⚙️ Standard Equipment: • Steel construction, H-type press body with 8 slide guides • Stress-relieved frame and load-bearing parts (vibration treated) • Bronze Zr14 slide bushings • WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Machine frame designed and manufactured according to CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic oil temperature and system status on screen • Cooling system • Off-line filtration • Two-hand control system • Light curtain (standard operator safety) • SIEMENS and SCHNEIDER electrical switchgear 📐 Technical Specifications – CHP 150 • Type: Steel construction, 8-guide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bushing: Bronze Zr14 • Capacity (Ram): 150 Tons • Movable Table Dimensions: 800 × 1000 mm • Fixed Table Dimensions: 800 × 1000 mm • Parallelism Tolerance: 120 micron/meter • Squareness Tolerance: 60 micron/meter • Stroke (Ram): 500 mm • Minimum Daylight: 100 mm • Maximum Daylight: 600 mm • Weld Stress Relief: Vibration treated • Welding: WPQR & WPS approved, TÜRK-AK accredited, complies with EN ISO 15614-1:2017 supervised by certified welding coordination engineers (EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 18.5 kW – IE3 • Main Pump: 32 cm³ – REXROTH or PARKER • Movable Table Fast Descent Speed: 150 mm/sec • Movable Table Pressing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec Gtedpfex N T Dzex Afqjt • Main Cylinder Inner Diameter: Ø280 mm – Ck45 • Approx. Height: 3650 mm • Approx. Width: 2950 mm • Approx. Depth: 2000 mm • Lower Table Height from Floor: 1250 mm • Pre-fill Valve: NG 100 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Distance Encoder: NOVATECHNIK or TURCK • PLC: DELTA • Touch Panel: DELTA 7” • Switchgear: SIEMENS – SCHNEIDER • Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 800 mm, dolžina mize: 1.000 mm, hod: 500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved via vibration. Bronze Zr14 material is used for the slide bearings, providing long-lasting and stable operation. Key Advantages - 8-guided H-frame structure - Vibration stress-relieved steel construction - Welding applications in compliance with ISO standards - PLC-controlled operation with touch screen interface - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to meet CE standards - PLC-controlled hydraulic system - Touch panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system Gsdpfxox N Tx Ss Afqjtt - Electronic filter contamination indicator - Monitoring of hydraulic unit oil temperature and system conditions via display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Clear Opening: 100 mm Max. Clear Opening: 600 mm Stress Relief Method: Vibration stress relief Welding Certification: Accredited WPQR and WPS by TÜRK-AK; welding application certificate per EN ISO 15614-1/2017 (monitored by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, širina mize: 1.000 mm, dolžina mize: 1.200 mm, stiskalna sila: 250 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process reliability thanks to their rigid frame design. The CRONOSSTECH CEHP-TB-250 – H Type Eccentric Press (250 Ton) is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety system - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety with light curtain protection - Reduced maintenance needs with automatic lubrication system Typical Applications - Punching / cutting / die forming operations - Mass production lines with automatic feeding - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake system • T-slotted auxiliary bolster plate • 8-point guided ram • Adjustable stroke on a single connecting rod • Balancer piston on ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor direction • Hydraulic overload safety system • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil tank with gear assembly • Dual-coil safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems Gtodpfx Afox N Sc Aoqjt • Sliding safety guard at table front • Custom die configurations ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Size: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, širina mize: 1.000 mm, dolžina mize: 1.200 mm, stiskalna sila: 200 t, trajanje garancije: 24 meseci, hod: 200 mm, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frame construction. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is engineered with a focus on stable operation in high-volume production, die protection, and operator safety. Its monoblock frame, 8-gib guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production environments. Key Advantages - Stable performance with large dies due to a 1200×1000 mm table size - Die and tooling protection with hydraulic overload safety - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection - Low maintenance need with automatic lubrication system Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch & brake • Additional bolted T-slotted plate • 8-gib guided ram • Adjustable stroke on single connecting rod Gtsdpfx Afsx N Scceqjt • Balancer piston in ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • LCD touchscreen • Motor reverse movement • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety guard • Enclosed gear set in oil sump • Double-solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feed systems • Scrap ejection systems • Sliding safety cover in front of table • Custom dies to specification ✅ TECHNICAL DATA (CEHP-TB-200) Capacity: 200 Ton Table–Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Dimension: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, širina mize: 750 mm, dolžina mize: 1.100 mm, stiskalna sila: 125 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, Eccentric presses are mechanical presses operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H type (straight-side) eccentric presses offer high stability and process security thanks to their rigid frame structures. CRONOSSTECH CEHP-TB-125 – H Type Eccentric Press 125 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. The monoblock frame, 8-point guided slide system, hydraulic overload safety device, and automatic lubrication infrastructure ensure dependable performance suitable for continuous production conditions. Key advantages • Stable and repeatable production with a 1100×750 mm table size • Die/equipment protection through hydraulic overload safety device • Controlled and user-friendly operation with PLC and touchscreen interface • High operator safety with a light curtain system • Low maintenance needs thanks to automatic lubrication infrastructure Application areas • Punching / cutting / die forming applications • Serial production with automatic feeding lines • High-volume production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted platen • 8-point guided slide Gtedpex N R U Rjfx Afqjt • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain guard • Enclosed gear group in oil chamber • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap evacuation systems • Sliding safety cover in front of the table • Custom dies upon request ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-125) Capacity: 125 Tons Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Dimension: 1100×750 mm Ram face size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, širina mize: 1.200 mm, dolžina mize: 2.200 mm, stiskalna sila: 500 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety in large bolster and heavy die applications, thanks to their rigid frame designs. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable operation under continuous production conditions. Highlighted Advantages - Stable operation for large dies with a 2200×1200 mm bolster - Die/equipment protection with hydraulic overload safety system - Precision guidance through 8-point guided ram and balancer piston - Controlled, user-friendly operation via PLC and touchscreen - Advanced operator safety with light curtain protection system Areas of Application - Punching, cutting, and forming operations requiring large bolsters - Mass production integrated with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Welded steel frame construction Gtjdpfx Aox N R Ahefqot • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse rotation motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed gear group in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard for bolster front • Custom dies per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.