Štiri čeljustna vpenjalna glava 28005 tip Wescott

RÖHM 315 er

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Bledpfev A Sqhex Afqjr Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Bsdpfx Ajd Nl E Ujfqelr Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Jaws individually adjustable Bsdog Rxh Ispfx Afqslr

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Bjdpfefmavxjx Afqslr Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Technical air supply: 8 bar. More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Blodpfx Aswxw S Iofqsr Available immediately! Can be tested under power.

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružna postelja, vodilno-vlečni stružnica, Leit- und Zugspindel-stružnica Bljdpfxswrfkfe Afqer -Proizvajalec: Meuser, vodilno-vlečni stružnica tip M-IV-S -Postelja stroja: kaljena -Dolžina struženja: 3800 mm -Premer struženja nad posteljo: 720 mm -Premer struženja nad suportom: 440 mm -Vretenina odprtina: Ø 95 mm -Hitrosti vretena: 22,4 - 1000 o/min -Klinično vpenjalo Forkardt Ø 400 mm -Držalo konjička: MK6 -Pogon: 18 kW -Oprema: 1x luneta, Multifix nosilec orodja, orodja glej fotografije -Dimenzije: 5930/1650/H1600 mm -Teža: 7500 kg

Leto izdelave: 1984, Stanje: dober (rabljeno), Bihler RM 40 (1984) – večsmerni stroj za prebijanje, prešanje in upogibanje Bjdpsh T Ulyefx Afqjlr Stroj je prikazan s petimi pomičnimi enotami (slajdi), na voljo je tudi šesta. Na voljo je več odvijalcev za pločevino ali žico. Stroj ima 8-tonski prešo in 5 ali 6 pomičnih enot, hidravlično vpenjanje za žico ali pločevino. Ena od naprav je opremljena z dodatnim podajalnim sistemom, ki dovaja material s hrbtne strani stroja skozi sredinsko odprtino.

Stanje: novo, For grinding HSS and carbide engraving cutters, as well as single- or multi-fluted end mills in various shapes, such as radius cutters or cutters with a negative conical angle. The universal indexing head is provided with 24 positions so that any specific angle of form can be achieved; a free rotation of 360° or 10° is allowed for grinding end mills, twist drills, and lathe tools. Simply replace the attachment on the indexing head to switch between tools, without complex assembly required. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding wheel ×1 Twist drill grinding attachment ×1 End mill grinding fixture ×1 Lathe tool grinding fixture ×1 Options Collets: Ø3, Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. collet capacity Ø3 - Ø18 mm Max. grinding diameter Ø18 mm Conical angle 0~180° Relief angle 0~45° Bljdpfxeq E Ry He Afqsr Negative angle 0~25° Speed 5300 rpm Grinding wheel Ø100 x 50 x Ø20 mm Motor 375 W Dimensions 550 x 460 x 490 mm Weight 51 kg

Leto izdelave: 1983, Stanje: dober (rabljeno), številka stroja/vozila: 2103, max. collet bore: 1 - 20 mm Ø max. radius to be ground: 20 mm cup wheel diameter: 100 mm Bljdpfx Aednfz Nsfqsr cup wheel speed: approx. 4,500 rpm drive motor: 380 V, 0.25 kW space requirement: 600 x 450 x 1380 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 41 mm, stružna dolžina: 1.000 mm, Amutio Cazeneuve Lathe Model HB 500 with 1000 mm between centers. Maximum swing over bed: 500 mm, maximum swing over cross-slide: 300 mm, spindle bore: 41 mm. Equipped with 18 spindle speeds ranging from 25 rpm to 2000 rpm. Includes Fagor digital readout, fixed and traveling steadies, safety guards, and operates on 220V. Bledpfx Afjv Rnfqjqor