Odpadke nakup rabljenega (473)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, Rabljene škarje M proizvajalca Safan Tip M Shear 430 6 TS 200 Gjdpey H D I Ejfx Anfebl Kapaciteta 4300 x 6 mm Samodejna nastavitev reže reza, kota reza in zadnjega prislona Opremljene s pnevmatskim dvigom na zadnji strani Return to sender Zaboj za odpadke Vhodna varnostna zaščita

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Godeu Thh Eepfx Anfebl Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, obratovalne ure: 28.748 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 570 kg, skupna masa: 20.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 37 kW (50,31 KM), volumenski pretok: 350 m³/h, Technical Data for Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of manufacture: 2015 Total operating hours: 30,143 hours (as of July 2025) Effective pump runtime: 6,527 hours (as of July 2025) Number of bales pressed: 115,193 (as of July 2025) Pre-press force: 25 t Main press force: 60 t Specific pressing force: 73 N/cm² Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Theoretical throughput: 800 m³/h Throughput under operating conditions: 350 m³/h Bale dimensions: 1,100 x 750 mm Drive power: 37 kW Binding: 5-fold vertical, fully automatic Throughput at bulk density of 50 kg/m³: 11 to 14 t/h Bale weights: 420 to 570 kg (material dependent) Hydraulic oil tank volume: 600 L Baler dimensions (assembled with hopper): 10,100 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine weight (baler): approx. 20 t Condition of the baler: The baler was partially overhauled in our workshop and subsequently tested in both manual and automatic modes. Godpfxevn Tg Ie Anfebl The following maintenance work was performed: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully emptied and cleaned - Oil and air filters replaced; new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers of the press ram removed and replaced - Grease cartridges of the automatic roller lubrication system replaced - Slide rails at the press floor in the pressing chamber cut out - Undercarriage reinforced with welded plates - New HARDOX slide rails welded in - Wire station with guide pulleys for lower wire cleaned and made operational - Slide rails on press channel floor cut out - New HARDOX slide rails welded in - Both side walls of the press channel removed and derusted - Worn side wall plates cut out - Complete side walls fitted with new wear plates and welded - Main hydraulic cylinder disassembled and inspected - Piston rod replaced, cylinder barrel honed - Complete seal kit renewed; pressure test performed - Vertical needle system for binding disassembled, cleaned, wire guide pulleys serviced - Chain cleaned and lubricated; chain tension reset - Drillomat cleaned; wire cutter, drill shafts and twisting fingers checked, retightened to specified torque and serviced - Machine inspected, general maintenance performed, and press tested in both manual and automatic modes Notes: The baler is sold without conveyor belt and without wire stations. Inspection by arrangement possible. We assume no liability for technical data or any errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Gbedpfou Th S Sex Anfsl Total current consumption: 70 A Throughput rate for empty beverage cans with: • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism Gjdpsx Dnb Ujfx Anfsbl • Replacement of the front two main running rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, skupna masa: 40.000 kg, kapaciteta rezervoarja za olje: 3.000 l, leto zadnje generalne obnove: 2024, For sale is a used baling press system consisting of a chain belt conveyor for under-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baling press, two complete wire tying racks each with 5 wire spool holders (wire not included). Technical data - Press: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific press force: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Gedpfou Th D Rox Anfjbl Filling volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Tying: 5-fold horizontal, fully automatic Throughput rates: approx. 30 to 35 t/hour, depending on material Hydraulic tank volume: 3,000 l Transport dimensions (press with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight (press): approx. 40 t Remarks: The baling press was partially overhauled in our workshop and fully tested after completion—see our function video for reference. Previously, paper and cardboard from municipal collection were pressed with the system. The operation was reassigned after the contract period ended, so the entire plant is for sale. Details of the overhaul and replaced spare parts can be found in the detailed photo documentation and our offer. The full documentation (manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. No liability assumed for technical data or possible errors. Technical data - Conveyor belt: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/minute Feed belt length: 6,900 mm Inclined belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive axle height above ground: 5,777 mm Feed belt wall height: 500 mm Inclined belt wall height: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor, built in 2017, was custom-built and installed to fit the press at its last installation in the Netherlands. The conveyor is in good, ready-to-use condition and has therefore not been overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 x Chain belt conveyor, Wagensveld B.V. 1 x Feed hopper with pre-compactor flaps 1 x Agitator 1 x MACPRESSE baling press, type 111A 2 x Wire tying racks with wire spool holders, without wire 1 x Operating manual with CE declaration, electrical and hydraulic wiring diagrams

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Gbedpfx Anovf E Avofel Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: Gedpfx Aneviwdmofjbl 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 10 t, širina odprtine za polnjenje: 580 mm, dolžina polnilne odprtine: 900 mm, dolžina bale: 800 mm, širina bale: 500 mm, višina bale: 600 mm, teža bale: 100 kg, skupna širina: 1.000 mm, skupna višina: 1.540 mm, skupna dolžina: 4.700 mm, skupna masa: 1.200 kg, moč: 6,8 kW (9,25 KM), transportna dolžina: 4.700 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Stroj je bil pri nas obnovljen, popolnoma razstavljen. Godpfxey D Dr Ss Anfobl Glavni valj je bil na novo zatesnjen. Nove hidravlične cevi. Novo hidravlično olje. Podoljni oljni motor. Plošče iz pleksi stekla obnovljene. Vodila valjev pritisne plošče na novo nastavljena. Trikratno vodoravno ročno vezanje. Vezanje z žico. Nastavljiva dolžina bale: 400, 600, 800, 1000 mm. Na voljo je uporabniški priročnik z elektro- in hidravlično shemo.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Presto HG20R Stiskalni kontejner za vozila z rolo kiper dvigalom Na voljo 3 kosi 20 m³ uporabne prostornine Odlagalna vrata zgoraj obešena Dvonivojska kavlji na obeh straneh Godsx Svx Tjpfx Anfebl Deljen pokrov nad polnilno odprtino, odpiranje levo/desno Priprava za uporabo z rampo Stroji so obnovljeni, preverjeni, servisirani in prebarvani v želeni standardni RAL barvi. Z veseljem pripravimo ponudbo z dostavo. Slike so referenčne fotografije strojev enakega tipa, ki smo jih izdelali.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Balirni stiskalnik za bale cca 400 kg. Proizvajalec: HSM Model: HL 3521 Leto proizvodnje: 2006 Stanje: dobro Stroj je po velikem servisu. Zamenjana oljna črpalka. Oljni bati so bili obnovljeni. Po dogovoru je možna takojšnja prodaja in odprema. Gjdpfxey A Hu Ho Anfjbl

Stanje: pripravljen za uporabo (rabljen), Sila stiskanja: cca 700 kN (cca 70 ton) Moč motorja: cca 11 kW Napajanje: 3 × 400 V / 50 Hz Teža posamezne bale: do cca 600 kg Dimenzije bale: cca 1100 × 1100 × 1200 mm Dimenzije stroja: cca 5,9 m dolžina, 2,5 m širina, cca 2,6 m višina Teža stroja: cca 7 ton Cikel: cca 45–47 s Konstrukcijske značilnosti: Gedpfx Ansra Dddjfebl - velik polnilni odprtina za karton - možnost avtomatskega nalaganja (npr. s transportnim trakom) - ročno vezanje z žico (4 žice) - hidravlična blokada palete in vrat za odstranitev bale Prednosti te preše: - velike bale = manj prevozov - visoka sila stiskanja - prilagojena za neprekinjeno delo Na voljo letniki: 2018–2020

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, ERFOR GR7 Granulator – Učinkovita rešitev za recikliranje plastike Ponujamo ERFOR GR7 granulator – robusten in učinkovit stroj, zasnovan za proizvodnjo visokokakovostnega regranulata iz plastičnih materialov. Idealna rešitev za podjetja, ki želijo predelati proizvodne odpadke in znižati stroške surovin. Ključne informacije: Zmogljivost: do 700 kg/h Materiali: LDPE, HDPE, PP (folije, proizvodni odpad, tiskani materiali) Stabilno, neprekinjeno delovanje Visoka in konstantna kakovost granulata Enostavno in zanesljivo upravljanje Oprema: Visoko zmogljiva plastifikacijska enota Avtomatski filtracijski sistem Granulacijski sistem Kompaktna, industrijska zasnova Gjdpfxoy Eyrdo Anfebl Zakaj GR7: Hitra donosnost investicije Zmanjšane izgube materiala Zanesljivo in dolgo življenjsko dobo Možnost prilagoditve potrebam kupca Stanje: Novo / izdelano po naročilu Proizvajalec: ERFOR / Koltex PRS Kontaktirajte nas – stroj bomo prilagodili vašemu materialu in zahtevani zmogljivosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 15 t, širina bale: 700 mm, višina bale: 700 mm, teža bale: 220 kg, vhodna napetost: 400 V, moč: 4 kW (5,44 KM), lastna masa: 2.700 kg, Manufacturer: Borg Baling Company Model: S-15KK Year of manufacture: 2002 3x400V, 4kW, 14.5A Pressing force: 15 t Net weight: 2.7 t Gjdjh Dy Rfspfx Anfsbl Max. bale dimensions: 700 x 700 x 1000 mm Wide selection of used machinery and industrial equipment

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Gbedpfx Ajic Rl Dsnfjl Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Provisurjev AM2C STS 2000 (separator mehkih tkiv) se ponaša z vzdržljivo konstrukcijo iz vrhunskih materialov, kar zagotavlja zanesljivo delovanje. Tehnologija učinkovito odstranjuje kostne delce, kite in hrustanec iz mesa in rib, pri tem pa ohranja strukturo vlaken. Je tudi zelo prilagodljiva—primerna za de-pakiranje mlečnih izdelkov ter ekstrakcijo krem iz zelenjave, kot sta avokado in česen. Ob vstopu v separator mehka potisna tračna enota ter nastavljiv perforirani boben mehansko ločujeta mehke sestavine od trdih nečistoč, ki se nato izločijo preko izmeta za odpadke. V kompletu z vozičkom za orodje in bobne. Opremljen s podajalnim sistemom z vijačnim polžem. Tehnični podatki: Moč: 12 kW Učinkovitost: 1.000–2.300 kg/h Gbjdpfx Astixrlonfsl Ročni/samodejni način delovanja Teža: 1.800 kg

Stanje: novo, Leto izdelave: 2026, Rezkalne gredi za Arjes Tytan 900 / 950 Gjdpfxsyf Uyzo Anfebl - za mešane odpadke - za les - za kovine - posebne gredi - drugo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, teža bale: 480 kg, Znamka: HSM Tip: V-press 860 plus Leto izdelave: 2015 Pritisna sila: 418 kN Napetost: 400 V Maks. teža bale: 480 kg (odvisno od materiala) Gbjdpfx Asy Nizcenfol Dimenzije bale: 120 x 120 x 78 cm Teža stroja: 2083 kg Dimenzije stroja: 180 cm x 125 cm x 298,5 cm Velikost polnilne odprtine: 120 cm x 65 cm Stanje: zelo dobro! Preverjeno delovanje. Video delujočega stroja je na voljo na zahtevo. Storitev FLITS Rental & Sales: ob vsaki napravi zagotovimo sveženj vezalne žice (120 žic). Potrebujete več svežnjev? Neobvezujoče povprašajte za ponudbo.

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Disponible a partir del 15.05.2026 Prensa empaquetadora Paal Konti 325 G, año de fabricación 2013 Datos técnicos: Fabricante: Paal Modelo: Konti 325 G Año de fabricación: 2013 Horas de funcionamiento: 11.723 (a fecha 10.02.26) Fuerza de prensado: 100 t Potencia de accionamiento: 2 x 55 kW Apertura de alimentación: 1020 x 1750 mm Dimensiones de la bala: 750 x 1100 mm, longitud variable Atado: 5 veces automático Rendimiento en: 35 kg/m³: aprox. 13,5 t/h 60 kg/m³: aprox. 21,5 t/h 100 kg/m³: aprox. 33 t/h Peso de la bala: hasta 800 kg Dimensiones de transporte: aprox. 12.216 x 2.530 x 2.800 mm (LxAnxAl) Peso de la máquina: aprox. 28.000 kg Gbjdpfx Ajy A Ibnenfjl Materiales: Papel, cartón, residuos ligeros, residuos plásticos Tenga en cuenta: Todos los datos técnicos se refieren a la información proporcionada por el fabricante. No nos hacemos responsables por la exactitud de los datos ni de posibles errores. La oferta es sin compromiso, sujeta a venta previa y puede ser retirada en cualquier momento. Visitas posibles previa cita. La venta se realiza mediante pago anticipado, salida de fábrica, sin garantía ni responsabilidad.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Balirka HSM 500.2 VL Štirikratno vezanje bale z žico Dimenzije bale: D x Š x V (mm): 1200 x 800 x 1000 - 1200 Teža bale (kg): cca 500 kg Tehnični podatki: D x Š x V (mm): 1213 x 1824 x 2987 Vhodni otvor (mm): 1200 x 565 Cikel (sek): 35 Pritisk (T): 54 Godpfx Anora Ak Eefjbl Napajanje (V): 400 (trifazno) Balirka HSM V-press 500.2 VL Letnik 2004-2008, cena 3500 EUR Transportna višina: 2600 mm

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 1.370 mm, dolžina rezanja (maks.): 1.370 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AUTOTRIM Program Monitor Zračni miza Polar dvigalo za skladanje Svetlobna zavesa Na voljo je vrhunski hitri rezalnik POLAR 137 XT-AT. Serija XT predstavlja premium razred strojev za rezanje Polar in nudi maksimalno učinkovitost za industrijski format 70x100 zahvaljujoč funkciji Autotrim. Barvni zaslon na dotik: Intuitivno upravljanje z vizualizacijo procesa in animiranim vodenjem upravljavca. Autotrim-sistem: Sprednja miza se programirano odpre in med delovanjem odreze odpadke neposredno v posodo ali sistem za odsesavanje (izjemen prihranek časa). Gbjdpfjy Efnwsx Anfjl Tehnični podatki (ključna dejstva) Širina reza: 1370 mm Globina podajanja: 1370 mm Višina vstavitve: 165 mm Upravljanje: XT (barvni zaslon na dotik) Posebnost: AT (Autotrim – integrirano odstranjevanje odpadkov)

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 80 SLD, with Lift/Tilt Device, semi-automatic, year 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Gbodpfx Asy Avlnjnfsl Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the stated specifications or potential errors. Offer is subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Sale is ex works, advance payment only, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 80 SLD, with Lift/Tilt Device, semi-automatic, year 2019 Manufacturer: Dixi Gbedpfoy Avhcjx Anfel Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the stated specifications or potential errors. Offer is subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Sale is ex works, advance payment only, without warranty or guarantee.

Stanje: dober (rabljeno), Bramidan B 20 Baler Bale dimensions (WxDxH, mm): 1200 x 800 x 800 Feed opening (WxH, mm): 1200 x 480 Pressing force: 20 tonnes Motor (kW): 4.0 Gedpjv Aku Sefx Anfebl Cycle time (s): 36 / 21 Baler dimensions (WxDxH, mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of bindings: 4 Year: 2012 - 2017 Price: €4500 Bramidan X25 – Efficient Waste Baler Suitable for a variety of materials, including stretchable types Large, wide chamber Safety locks prevent material expansion inside the chamber Short cycle time enables quick waste processing TYPES OF WASTE: - Cardboard - Plastic film - Paper - PET bottles - Aluminium cans - Rigid plastics - Textiles - EPS styrofoam - Steel cans BALE DIMENSIONS: 1200 x 800 x 800 mm PRESS FORCE: 25 t BALE WEIGHT: Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year: 2012-2018 Price: €5500 ORWAK 3410 For cardboard, film, cans, PET bottles. Pressing force: 24 tonnes. Power supply: 3-phase 400 V, 50 Hz Bale dimensions: Width: 1200 mm Depth: 800 mm Height: 1000 mm Bale weight: up to 400 kg Year: 2010-2013 Price: €4000 Orwak 3420 Year: 2014 Price: €5000 Bramidan 4-OS baler – Price: €5200 Pressing force: 50 tonnes Baler 4-X25 – Price: €4500

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 700 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3617, Model/Tip: RUF 15/4000/70 Št. številka: 3617 Leto izdelave: 2023 Pogonski motor: 15 kW Zmogljivost do max.: 450 kg/h (odvisno od materiala) Pritisni tlak: ca. 4000 kg/cm² Oblika briketa: 70mm Delovne ure: ca. 700 ur Garancija: 12 mesecev po dobavi Razpoložljivost: ca. 8 tednov po prejemu avansa Podrobnosti: + Siemens TP 700, Siemens S7-1200 Gedpfx Ajt Sgrzenfjbl + Podaljšek lijaka z mrežo + Električna emulzijska črpalka + Pršilna naprava + Pregledna vrata v lijaku