Nastavljiv Prehoda Mills nakup rabljenega (10.585)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Völklingen
700 km
Namizni vrtalni mlin
FRORIEP70000x1300mm
Klic
Stanje: rabljeno, x-axis / mm
y-axis / mm
z-axis / mm
The boring mill is sold without clamping plates –
the price refers exclusively to the boring mill.
Technical Data
Horizontal Milling and Boring Machine with Support Sleeve
Working Range
Vertical adjustment of the spindle head
from the clamping surface: 0 - 3000 mm
Horizontal travel of the column: 7000 mm
Maximum drilling depth with boring spindle only: 1200 mm
Maximum drilling depth with boring spindle and support sleeve combined: 1300 mm
Boring spindle diameter: 150 mm
Milling spindle diameter: 240 mm
Support sleeve diameter: 390 mm
Extension stroke of the support sleeve: 700 mm
Boring spindle tool holder: ISO 50
Maximum workpiece weight: 70,000 kg
When placed on 4 prisms: 95,000 kg
Main Drive
Ksdexdnraepfx Af Tjdg
Total speed range, adjustable from: 2 - 795 rpm
Range 1: 2 - 50.4 rpm
Range 2: 50.4 - 126 rpm
Range 3: 126 - 314 rpm
Range 4: 314 - 795 rpm
Rated drive power at nominal speed 17.5: 80 kW
Rapid traverse speed of spindle head and column: 1800 mm/min
Rapid traverse speed of boring spindle and support sleeve: 1400 mm/min
Fine feed speed of spindle head and column:
medium: 75 mm/min
fine: 3 mm/min
Fine feed speed of boring spindle and support sleeve:
medium: 57.7 mm/min
fine: 2.5 mm/min
Feed of spindle head and column for milling:
Range 1: 3 - 75 mm/min
Range 2: 72 - 1800 mm/min
Feed of boring spindle for drilling:
Range 1: 0.19 - 4.7 mm/min
Range 2: 2.2 - 56 mm/min
Range 3: 56 - 1400 mm/min
Special Equipment
Digital length measuring system in horizontal and vertical direction
Accuracy 0.01 mm
Rotary and traversable clamping table by Collet & Engelhard, Offenbach
Model Tdvmf 1.6 (Technical data see “Clamping Table”)
Rotary and traversable clamping table by Scharmann, Rheydt
Model DAV 1600
Rotary and traversable clamping table by Froriep, Rheydt
Slewing crane for tool change, maximum load 500 kg
Special Tools
Tungsten carbide core drill bits for extracting core samples
Universal facing and boring head by Wohlhaupter, Frickenhausen
Model UPA7, with the following data:
1 division on fine adjustment: 0.01 mm in diameter
1 revolution of the fine adjustment: 0.5 mm in diameter
Facing and boring range: 0 - 1250 mm
Maximum carriage adjustment: 210 mm
Automatic carriage feeds in mm/rev during facing:
0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 -
Rapid adjustment per revolution of the
dial spindle: 6 mm in diameter
Largest diameter of the carriage at zero position corresponds to the smallest
drilling diameter of 323 mm
Head height without shank: 260 mm
Mali oglas
Nemčija
653 km
Chiron Mill 2000
CHIRONMill 2000
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 550 mm, skupna masa: 9.600 kg, največja hitrost vretena: 6.000 obr/min, Cette fraiseuse 3 axes CHIRON Mill 2000 a été fabriquée en 2006. Elle offre une grande course de travail avec X 2000 mm, Y 500 mm et Z 550 mm, une vitesse de broche de 6 000 tr/min et une commande Siemens. La machine est équipée d’un magasin d’outils de 40 positions, d’une tête pivotante CN et d’un convoyeur à copeaux avec système de haute pression. Profitez de l’occasion pour acquérir ce centre d’usinage vertical CHIRON Mill 2000. Contactez-nous pour plus d’informations sur cette machine.
Équipements supplémentaires
• Convoyeur à copeaux et système de refroidissement
• Convoyeur à copeaux avec système haute pression
Avantages de la machine
Kdjdjyaagpepfx Af Teg
Avantages techniques
• Magasin d’outils : 40 positions (magasin à chaîne)
• Tête pivotante CN
Informations complémentaires
Équipements optionnels
Deux extracteurs neufs
Système de bridage à point zéro
Mali oglas
Oberleichtersbach
600 km
Stroj za rezkanje s križno rezalno glavo
EickhoffETH50
Klic
Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Diameter x width: 750 x 1,500 mm
Kdjdpfjqnvtzsx Af Tog
Max. operating pressure: 300 bar
Cutting force: 60 kN
Weight: approx. 2,800 kg
76 chisels
Mali oglas
Oberleichtersbach
600 km
Udarni mlin
BergerPrallmühle
Klic
Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), Infeed: approx. 1,000 x 700 mm
Ksdpfx Afou Dhg Ee Tedg
Rotor diameter x width: 600 x 1,000 mm
Maximum feed size: 100 mm
Electric drive
Semi-mobile on steel skid frame with infeed and discharge hopper
Mali oglas
Pfullingen
505 km
Rezkalni stroj
ABENEVHF 380 TNC 620
Klic
Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 800 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 450 mm, potovalna razdalja osi X: 800 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 5 m/min, hitrost podajanja os Z: 2 m/min, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 55 obr/min, poteza s peresom: 75 mm, hod vretena: 75 mm, premer tulec: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 2 m/min, širina mize: 500 mm, dolžina mize: 900 mm, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 55 obr/min, obremenitev mize: 400 kg, skupna masa: 2.700 kg, teža obdelovanca (maks.): 400 kg, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, ABENE VHF 380 CNC – Universal Milling and Drilling Machine (NEW)
Condition: New
Location: Pfullingen (Germany)
Inspection: Under power, ready for demonstration
Kodpfxowf E R Ee Af Todg
Technical Specifications
Travel paths: X = 800 mm | Y = 500 mm | Z = 475 mm
Control: Heidenhain TNC 620 with ABENE/Heidenhain software
Spindle speed: 55 – 5,000 rpm (2-speed gearbox, frequency-controlled)
Spindle taper: SK 40 (DIN 2080 / 69871 / 7388)
Spindle motor: 7.5 kW AC motor
Feed rates: X/Y up to 5,000 mm/min, Z up to 2,000 mm/min
Swivel head: 0 – 140°
Table size: 900 × 500 mm
T-slots: 7 × 14 mm (1 × H7)
Max. table load: 400 kg
Dimensions (W × D × H): approx. 2,300 × 2,450 × 2,200 mm
Weight: approx. 2,700 kg
Features
• Heidenhain TNC 620 with ABENE software for user-friendly operation
• Electronic handwheel HR-510 for X, Y, and Z axis
• AC servo drives with stepless control
• Automatic central lubrication for all guideways and ball screws
• Hardened and ground guideways
• Collision protection monitoring on all axes
• Removable chip tray
• 24 V / 70 W LED machine lamp
• Complete electrical installation 400 V / 3 Ph / 50 Hz
• Table enclosure with sliding door
• Including operating manual, spare parts catalog, and test certificate
Description
The ABENE VHF 380 CNC is a universal milling and drilling machine “Made in Sweden” featuring the proven ABENE slant-bed design.
It combines precision, stability, and easy operation – ideal for training, tooling, and small-batch production.
Thanks to the intuitive Heidenhain TNC 620 control, the machine is exceptionally user-friendly and perfectly suited for deepening CNC skills in practical applications.
The machine is located in our warehouse in Pfullingen and can be inspected and tested under power.
We will gladly arrange a demonstration appointment!
Mali oglas
Češka republika
454 km
75 kW Bühler horizontalni kladivni mlin
BUHLERHORIZONTAL HAMMER MILL
Klic
Stanje: rabljeno, Rabljen horizontalni kladivni mlin Buhler.
- Rotor iz ogljikovega jekla premera približno 980 mm.
- Rotor je razdeljen na 3 sekcije.
- Rotor ima 8 gredi, vsaka gred je opremljena z 10 prostovrtečimi kladivi.
- Rotor poganja električni motor 75 kW, 380/660 V, 1480 rpm, 50 Hz.
- Vključenih je več rezervnih sit in električna krmilna omarica.
Kdodox Ryp Hjpfx Af Tjg
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
HermleUWF802M
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Hermle UWF 802M with HS 401 Path Control - Excellent CONDITION!!
Technical Data:
>> Year of manufacture: approx. 1995, Machine No. 10212
>> Fixed angle table
>> Spindle speed: 17 to 3550 rpm
>> Stepless feed on 3 axes from 0 to 1600 mm/min
>> Drive power: 6 kW
>> Travel X/Y/Z: 500/430/400 mm
>> Vertical quill and horizontal quill - SK40
>> Hydraulic clamping system
>> Weight: approx. 1800 kg
Kdodpfx Afov Ed U De Teg
>> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m
Accessories and Equipment:
>> HS 401 path control
>> Hydraulic clamping vertical and horizontal
>> Automatic central lubrication
>> Spindle brake
>> Technical documentation, spare parts diagrams, control operating manual and programming examples
About the machine:
For sale is a Hermle UWF 802M universal milling machine with HS401 path control. This universal milling machine is in very good condition. The path control is very easy to operate. Length and radius corrections can be made in the program. No extensive CNC knowledge is required for this. Of course, the Hermle can also be operated manually without control. Furthermore, the machine is equipped with hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by folding away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Hermle under power at our facility.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
KunzmannWF600M
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE-Compliant!
Technical Specifications:
- Year of manufacture: 2015 Machine No. 610398
- Clamping surface of milling table: 800 x 425 mm
- Number of T-slots: 6
- T-slot width: 14 H7
- T-slot spacing: 63 mm
- Max. load: 300 kg
- Spindle speed range: 1–4500 rpm
- Stepless feed rate: 0–2000 mm/min
- Rapid traverse, X and Y axes: 5000 mm/min
- Z axis: 4000 mm/min
- Travel distances X/Y/Z: 600/400/400 mm
- Vertical and horizontal quill – SK40
- Hydraulic clamping system
- Weight: approx. 2025 kg
- Dimensions (LxWxH): approx. 2 x 2 x 2 m
- Main drive motor: AC three-phase motor
- Output at 100% duty cycle
Accessories and Equipment:
- Heidenhain TNC 128 control
- Hydraulic clamping vertically and horizontally
- Automatic central lubrication
- Spindle brake
- Technical documentation, spare parts diagrams, operating manual
- Coolant system
About the Machine:
Kdedpfx Afjwz Eu No Teg
For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control system. The TNC 128 features numerous dialog-guided cycles with graphic simulation for fast and easy data input, e.g. various drilling cycles, thread cutting, bolt circles, linear drilling patterns, rectangular pockets, rectangular studs, and surface milling.
This universal milling machine is in nearly new condition. The control is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple via the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to inspect and test the Kunzmann on site under power.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
KunzmannWF 410 M
Klic
Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF 410M with Heidenhain TNC 128 Control - LIKE NEW CONDITION, CE Compliant!
Technical Data:
- Year of manufacture: 2022, Machine No. 411555
- Milling table clamping surface: 650 x 375 mm
T-slots: 5
Slot width: 14 H7
Slot spacing: 63 mm
Max. table load: 250 kg
- Speed range: 1–4500 rpm
- Feed rate X/Y/Z axis (stepless): up to max. 5/5/4 m/min
- Travel X/Y/Z: 410/350/450 mm
- Vertical and horizontal quill – SK40
- Hydraulic pull-in system
- Weight approx. 2000 kg
- Dimensions approx.: 2 x 2 x 2 m
- Connected load: 13 kVA
Accessories and Equipment:
- Heidenhain TNC 128 control
Kjdpfx Aev Rppksf Tedg
- Heidenhain HR 510FS electronic handwheel
- Hydraulic clamping, vertical and horizontal
- Automatic central lubrication
- Spindle brake
- Technical documentation, spare parts lists, operation manual
- Machine lamp
- Minimum quantity lubrication system
- Steady rest
- Digital display for quill stroke
- Oriented spindle stop (thread cutting without compensating chuck)
- Chip guard enclosure
- Edge finder KT 130
- Coolant system
- Rotary table 200 mm
- Dividing attachment with 125 mm three- and four-jaw chuck
- Hydraulic vice 125 mm
About the machine:
For sale is a Kunzmann WF 410M universal tool milling machine, year 2022, in like-new condition, equipped with a Heidenhain TNC 128 control. The TNC 128 offers numerous dialog-guided cycles with graphical simulation for rapid and simple data entry, e.g., various drilling cycles, thread cutting, bolt circles, linear hole patterns, rectangular pockets, rectangular studs, and face milling. The control is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward, thanks to the tiltable vertical head. The guides are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically checked by us. Take the opportunity to inspect and test the Kunzmann under power on site.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
DeckelFP4M
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paint Finish!!!
Technical Data:
>> Year of manufacture: 1987 Machine no.: 2203-2772
>> Fixed angle table
>> Spindle speed: 50 - 2500 rpm
>> Feed rate: 8 – 630 mm/min
>> Drive power: 3.7 / 4.4 kW
>> Spindle brake
>> Rapid traverse: 1300 mm/min
>> Travel X/Y/Z: 500/400/400 mm
>> Vertical milling head adjustable on spindle carrier: 150 mm
>> Vertical and horizontal quill - SK40
>> Vertical quill extendable 90 mm
>> Drawbar system: M16
>> Weight approx. 1500 kg
Equipment and Accessories:
>> 3-axis Heidenhain digital readout
>> Coolant system
Kedsvg Ewcspfx Af Tsdg
>> Chip tray
>> Central lubrication
About the machine:
Offered here is a Universal Milling Machine Deckel FP4M in very good condition. The machine has minimal backlash, and all feed screws can be moved smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and more precise. You are welcome to inspect and test the machine under power on site.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
KunzmannWF4/3
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-Compliant!
Technical Data:
>> Year of manufacture: 2006 Machine no.: 348013
>> Fixed angular table
Ksdjwrhxfspfx Af Todg
>> Infinitely variable spindle speed up to 4,500 rpm
>> Stepless feed in 3 axes from 0 to 2,000 mm/min
>> Rapid traverse X and Y axis: 5,000 mm/min
Z axis: 4,000 mm/min
>> Travel X/Y/Z: 400/350/400 mm
>> Table size: 650 x 350 mm
>> Table load: 250 kg
>> Vertical quill stroke: 60 mm
>> Vertical and horizontal quill - SK40 taper
>> Hydraulic drawbar system
>> Weight approx. 1,800 kg
>> Required space approx.: 2.3 x 2 x 2 m
>> Drive power: 15 kVA
Equipment and Accessories:
>> Heidenhain TNC 320 contouring control
>> Hydraulic clamping vertically and horizontally
>> Automatic central lubrication
>> Spindle brake
>> Technical documentation, spare parts diagrams, control manual, programming examples
>> Handwheels
>> Coolant system
>> Electronic handwheel HR410
About the Machine:
Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Furthermore, the machine features hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal operation is straightforward due to the swing-away design of the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested at our premises. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
KunzmannWF 7/3
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF7/3 with Heidenhain TNC 310 Contour Control – Excellent Condition, CE Compliant!!
Technical Specifications:
>> Year of manufacture: 2004 Machine No.: 370506
>> Milling Table Clamping Surface: 800 x 425 mm
T-slots: 6
T-slot Width: 14 H 7
T-slot Pitch: 63 mm
Max. Table Load: 300 kg
>> Spindle Speeds: up to 4,500 rpm
Kdodewpkchepfx Af Tsg
>> Feed Range: up to 2,000 mm/min
Rapid Traverse: up to 5,000 mm/min
>> Travel X/Y/Z: 600 / 400 / 400 mm
>> Vertical and Horizontal Quill – SK40
>> Hydraulic Drawbar System
>> Weight: approx. 2,000 kg
>> Dimensions (approx.): 2 x 2 x 2 m
>> Main Drive Motor: 5.5 kW
Equipment and Accessories:
>> Heidenhain TNC 310 Contour Control
>> Hydraulic Clamping – Vertical and Horizontal
>> Automatic Central Lubrication
>> Spindle Brake
>> Electronic Handwheel
>> Heidenhain Touch Probe
>> Technical Documentation, Spare Parts Manuals, Operating Instructions
>> Full Protective Enclosure / Safety Cabin
>> Coolant System
About the Machine:
Offered here is a Kunzmann WF7/3 universal tool milling machine equipped with a Heidenhain TNC 310 contour control. This universal milling machine is in very good condition. The control system is very user-friendly. The machine is equipped with hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal setup is particularly straightforward due to the tilting vertical head. Guides are lubricated regularly thanks to the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to view and test the Kunzmann under power at our facility.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
Deckel FPSFP3 Aktiv
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition
Technical Data:
• Year of manufacture: 1980 | Machine No. 2201-5045
• Fixed angle table
• Spindle speed: 25 - 2,500 rpm
• Infinitely variable feed rate on all 3 axes
• Rapid traverse on all 3 axes
• Motor power: 2.0 / 4.0 kW
• Spindle brake
• Travel (X/Y/Z): 500 / 300 / 400 mm
• Vertical milling head movable on spindle head by 200 mm
• Extendable vertical and horizontal quill – SK40
• Drawbar system M16
• Weight: approx. 1,500 kg
Equipment and Accessories:
Kjdpfju Dm E Hsx Af Tsdg
• 3-axis Aktiv Digital Readout (Heidenhain, latest version)
• Coolant system
• Central lubrication system
About the Machine:
Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
KunzmannWF4/3
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant!
Technical Specifications:
- Year of manufacture: 2008, Machine No. 348084
- Rigid universal angle table
- Infinitely variable spindle speed up to 4,500 rpm
- Infinitely variable feed on 3 axes from 0 to 2,000 mm/min
- Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min
- Travel (X/Y/Z): 400/350/400 mm
- Table size: 650 x 350 mm
- Table load capacity: 250 kg
- Vertical quill stroke: 60 mm
- Vertical and horizontal spindle: SK40 taper
- Hydraulic clamping system
- Weight: approx. 1,800 kg
- Space requirement: approx. 2.3 x 2 x 2 m
- Drive power: 15 KVA
Features and Accessories:
- Heidenhain TNC 320 CNC control
- Hydraulic clamping vertical and horizontal
- Centralized automatic lubrication system
- Spindle brake
- Technical documentation, spare parts diagrams, control manual, and programming examples
- Handwheels
- Coolant system
Kjdov Dut Iopfx Af Tsdg
- Electronic handwheel HR410
About the Machine:
Offered for sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the centralized lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Kunzmann under power on site.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
DeckelFP4 M
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital display in special light grey paint!
Technical Data:
>> Year of manufacture: 1986, Machine No. 2203-2486
>> Fixed angle table
>> Spindle speed: 50 - 2500 rpm
>> Feed rate: 8 – 630 mm/min
>> Drive power: 3.7 / 4.4 kW
>> Spindle brake
>> Rapid traverse: 1300 mm/min
>> Travel X/Y/Z: 500/400/400 mm
>> Vertical milling head on spindle stand, adjustable by 150 mm
>> Vertical and horizontal quill - ISO 40 taper
>> Vertical quill extendable by 90 mm
Kjdpevb T Ufjfx Af Todg
>> Drawbar system M16
>> Weight approx. 1,500 kg
Accessories and Equipment:
>> 3-axis digital readout Heidenhain
>> Coolant system
>> Chip tray
>> Central lubrication
About the machine:
For sale is a Deckel FP4M universal milling machine in very good condition. The machine exhibits minimal play in the handwheels and all spindles move easily and smoothly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. The oil has been changed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.
Mali oglas
Ubstadt-Weiher
585 km
Potovalni rezkalni stroj
DeckelFP3L
Klic
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3L with 3-axis K&C digital display, NEW, in very good condition
Technical Data:
- Year of manufacture: approx. 1975 Machine No. 0924
- Fixed angular table (clamping surface 1000 mm x 440 mm)
- Spindle speed: 40 – 2000 rpm
- Feed and rapid traverse on 3 axes
- Feed: 10 to 500 mm/min
- Rapid traverse: 1500 mm/min in all feed directions
- Drive power: 2.2 kW
- Travel X/Y/Z: 800/300/400 mm (Y-axis travel displacement additionally 200 mm)
- Equipment: vertical & horizontal spindle
- Extendable vertical quill and horizontal quill SK40
Kedpfx Afevn N Hds Tjdg
- Drawbar system S20x2
- Weight approx. 1900 kg
Accessories and Features:
- 3-axis K&C digital readout, newly installed, with manufacturer’s warranty and operating manual.
Display unit: reference points, set zero points, input coordinates, mm/inch switch, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc.
- Mechanical central lubrication
- Operating manual
- Hydraulic vice 160 mm
- Rotary table Walter 500 mm
About the Machine:
Offered is a universal milling machine Deckel FP3L in very good condition. The vertical head can be shifted by 200 mm to allow for an even larger working area. A central pump ensures lubrication of the various axes. A unique feature of this machine type is its basic design: it is a machine with a slant bed table. The movement processes are allocated to the work spindle and thus to the tool. This results in high accuracy, as different workpiece weights have no effect on the axis movements. Mechanically and electrically tested. You are welcome to inspect and test the machine under power on site.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
Emco EmcomillC40 Linear
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Emco C40 Linear with Digital Display, Path Control, Excellent Condition – CE Compliant!
Technical Specifications:
- Year of manufacture: 2008
Machine No.: BA1DW2503
- Milling table clamping surface: 800 x 400 mm
Number of T-slots: 8
Slot width: 14 H8
Slot pitch: 50 mm
Maximum table load: 300 kg
- Infinitely variable spindle speed: 10–5000 rpm
- Infinitely variable feed: 10–2000 mm/min
Rapid traverse (X-axis): 5000 mm/min
- Travel (X/Y/Z): 450/350/400 mm
- Vertical & horizontal quill with SK40 taper
Ksdpfxewxxd Ee Af Tsdg
- Hydraulic drawbar system
- Quill stroke: 80 mm
- Weight: approx. 2000 kg
- Dimensions (LxWxH): approx. 2.5 x 2 x 2 m
- Main drive motor: 7 kW
- Spindle brake
- Technical documentation, spare parts diagrams, operation manual
- Swing-type safety cabin
- Coolant system
- Machine lamp
- Indexing device with tailstock
- Steady rest
- Röhm machine vice
About this machine:
For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility and has seen very little use. The control system is extremely user-friendly. Furthermore, the machine is equipped with hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal mode is very easy by swiveling away the vertical head. The Emco has been mechanically and electrically tested in-house. Take advantage of the opportunity to inspect and test the machine under power at our facility.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
FehlmannPICOMAX 56 TOP
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, High-Precision Drilling and Milling Machine
Fehlmann Model Picomax 56TOP Heidenhain TNC 620 As-new Condition, CE compliant!
Technical Specifications:
Kdedpewutrpefx Af Teg
>> Year of manufacture: 2016 Machine-No. 12416433
>> Travels X/Y/Z: 500 / 400 / 400 mm
>> Distance table–spindle nose: 120–520 mm
>> Clamping surface (L x W): 908 x 480 mm
>> Spindle speed range: 50–12,000 rpm
>> Drive power: 9.5 kW
>> Required space (W x D x H): 1700 x 1900 x 2500 mm
>> Weight approx. 3,000 kg
About the machine:
The top machine for both manual and CNC operation, featuring Fehlmann’s innovative user interface: handy, fast, and economical.
The precision milling and drilling machine PICOMAX 56 TOP (Touch Or Program™) is equipped with a completely new operating concept, combining 3-axis CNC with manual operation via drilling lever and handwheels. Specifically designed to perform milling, drilling, and thread cutting on single parts quickly, safely, and efficiently without time-consuming programming. After a very short introduction, the PICOMAX 56 TOP milling machine can be operated extremely economically by skilled personnel even without programming knowledge.
Even in its standard configuration, the FEHLMANN milling machine 'Made in Switzerland' offers various features of a modern, high-performance milling machine, such as: fully digital Heidenhain TNC 620 CNC controller, a proprietary FEHLMANN liquid-cooled high-torque motor spindle for universal milling up to 12,000 rpm, as well as Z/S-interpolated thread cutting, 3D milling, boring, etc.
Tool holders with vise and accessories (see pictures) are included. Absolutely as-new condition. Mechanically and electrically inspected. Take advantage of the opportunity to view and test this machine under power on site.
Mali oglas
Ubstadt-Weiher
585 km
Rezkalni stroj
EMCO EmcomillFB 450 Linear
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Emco Emcomat FB-450 Linear with Position Display — As New Condition, CE-Compliant!
Technical Specifications:
>> Year of manufacture: 2013 Machine No.: F9A124962
>> Milling table clamping surface: 800 x 400 mm
Clamping slots: 8
Slot width: 14 H 8
Slot spacing: 50 mm
Max. load: 150 kg
>> Infinitely variable spindle speed: 10–5000 rpm
>> Infinitely variable feed rate: 10–5000 mm/min
Rapid traverse X-axis: 5000 mm/min
>> Travel (X/Y/Z): 450/350/400 mm
>> Vertical and horizontal quill – SK40
Kdsdpfx Aswycv Ief Tsg
>> Hydraulic clamping system
>> Quill stroke: 80 mm
>> Weight: approx. 2000 kg
>> Dimensions (approx.): 2.5 x 2 x 2 m
>> Main drive motor: 10 kW
>> Spindle brake
>> Technical documentation, spare parts diagrams, operating manual
>> Hinged enclosure
>> Coolant system
>> Machine lamp
>> Dividing head
>> Rotary table
>> Machine vise
>> Counterholder
About the machine:
For sale is a universal milling machine Emco Emcomat FB-450 Linear equipped with a position display. This universal milling machine is in as-new condition, coming from a state-owned enterprise where it was only rarely used for training purposes. The control system is very user-friendly. Additionally, the machine features both vertical and horizontal hydraulic clamping. Conversion from vertical to horizontal operation is extremely straightforward, thanks to the fold-away vertical head. The Emco has been mechanically and electrically tested in our facility. You are welcome to view and test the machine under power at our location.
Mali oglas
Ubstadt-Weiher
585 km
Stroj za vrtanje in rezkanje
FehlmannPICOMAX 54
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, High-Precision Drilling and Milling Machine
Kjdpfx Asukf Ncof Tsdg
Fehlmann Model Picomax 54 Heidenhain TNC 310
Very good condition
Technical Data:
>> Year of manufacture: 2001
>> Travel X/Y/Z: 500 / 250 / 160 mm
>> Travel W: 480 mm
>> Clamping surface (L x W): 885 x 320 mm
>> Permissible table load: 250 kg
>> Distance table - spindle nose: 0 – 605 mm
>> Feed rate X/Y: 1 – 2000 mm/min
>> Feed rate Z: 1 – 1200 mm/min
>> Tool quick-change system SF 32
>> Stepless speed range: 9200 rpm
>> Drive power: 5 kW
>> Space requirement (W x D x H): 1850 x 2550 x 2400 mm
About the machine:
Offered here is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. The program setup is particularly simple thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-friendly contouring controls that allow you to program conventional milling and drilling operations directly on the machine using the easy-to-understand plain text dialog. The machine runs very smoothly even at maximum spindle speeds. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power at our site.
Mali oglas
Sankt Leon-Rot
587 km
CNC stružno-rezkalni center
DMG MORICLX 450 V6
Klic
Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 2.400 h, Funkcionalnost: popolnoma funkcionalen, 2-axis universal turning center with driven tools, C-axis, Y-axis, and sub-spindle
Machine in excellent condition
Ergonomic DMG MORI SLIMline® Panel
Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm
Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480)
Direct measuring system for X and Y axes
Chip container
Hydraulic hollow clamping cylinder, max. bar capacity D80 mm
Sub-spindle A2-6" with ISM 52 spindle motor, power 13 / 14 kW (100/40% DC), 5,000 rpm
Electronic handwheel
Y-axis ± 60 mm
DMG MORI IoTconnector
Control
DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19"
Bar package & interfaces
Workpiece catcher up to D80 x 200 mm, max. workpiece weight 4 kg
Interface for bar loader or feeder (DMG MORI standard)
Right-side chip conveyor
Signal tower with 4 colors
Main spindle chuck
Hydraulic 3-jaw chuck D254 SMW BB-D 250
Bar passage D78 mm (limits bar capacity to D78 mm)
Sub-spindle chuck
Hydraulic 3-jaw chuck SMW BB-D 210
Bar passage D66 mm
Draw tube inner diameter D52 mm
Sub-spindle options
External chuck flushing
Pneumatic ejector with internal coolant supply
Coolant / Chip removal
12 bar high-pressure system with dual filter and manual switch-over
Coolant spray gun 5 bar
Measuring / Monitoring
Manual tool probe MARPOSS
Kdodpfx Aox Tg I Ujf Tjg
General options
Part conveyor front left instead of part container
Conveyor outside the work area
Jaw options
Set of soft jaws for BB-D 210 (3 pcs per set, 3 sets)
Set of soft jaws for BB-D 250 (3 pcs per set, 3 sets)
Fanuc options
Tool monitoring software
NCGuide software for programming environment incl. MANUAL GUIDEi
Technology cycle alternating spindle speed
Connectivity
SERVICEcamera incl. accessories (antenna, charger, SD card)
Special equipment / Accessories
Hydrafeed MSV 80 with floor rails, barfeed magazine, and modifications
Swarf bin (Model 350)
VDI40 holder with multiple seats D1 (2 pcs)
VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pcs)
VDI40X25X100 25Ø boring bar holder (1 pc)
Axially driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc)
Radially driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc)
Parting-off holder H=32 mm, VDI40, universal gearing (1 pc)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Nemčija
621 km
3-osni rezkalni stroj z digitalnim prikazovalnikom HH
EMCOFB-4
Klic
Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 100 mm, Orodjarska rezkalna stroj V/H
Proizvajalec: Emco
Tip: FB-4
Leto izdelave: 2004
Krmiljenje: prikazovalnik Heidenhain ND-760
Tehnični parametri:
-----
• Pomiki X-Y-Z: 450 x 300 x 350 mm
• Vpenjalna površina: 800 x 400 mm
• Vpenjanje orodja: SK-40
Kdedpfxex Tzk Rj Af Tsg
• Hodi pinole: 100 mm
• Rezkalna glava vrtljiva ± 90°
• Vreteno: 50 – 2.500 obr/min
• Izbiranje hitrosti: 18 stopenj
• Električno centralno mazanje
• Strojna luč
• Hladilni sistem
• Kabina proti brizganju (zložljiva)
• Teža: 1.550 kg
• Dimenzije DxŠxV v mm: 1.485 x 1.500 x 1.700 mm
Dodatna oprema:
-----
• 4x nastavljive noge za stroj
• Navodila za uporabo
• Vpenjalni ključ
• Nasprotni ležaj za vodoravno obdelavo
• Set gredi za vodoravno obdelavo
• Zaščitni pokrov mize (trenutno odstranjen)
Na voljo sta dve identični stroji, obe servisirani in delno prenovljeni v Q4-2025.
Mali oglas
Concordia Sagittaria
174 km
Vrtalni in rezkalni stroj
SerrmacTCS E TC
Klic
Stanje: novo, SERRMAC TCS E TC Drill-Milling Machine (Cross Table)
New "CE Marked"
3 years warranty
Automatic feed
High-efficiency transmission with electronic speed variator
via vector inverter.
Tool cooling system
Kdodpfx Ajfh Si Uof Tsg
Tapping via inverter, complete with digital RPM counter
Spindle shaft with thread
for CM4 tool clamping
Cross table dimensions: 800 x 255 mm
Drilling capacity in steel R50: ø 50 mm
Tapping capacity in steel R50: M26
Spindle taper: CM4
Spindle travel: 145 mm
Quill diameter: 72 mm
Automatic feed, 3 speeds: 0.05 – 0.1 – 0.2 rpm
Automatic feed with electromagnetic clutch, 3 speeds: 0.05 – 0.1 – 0.2 mm/rev
Prismatic column
Cross table
Inverter drive I
Spindle speed: 45 – 2150 rpm
Motor power (380 V – 50 Hz): 3 kW
T-slot size: 14 mm
Cross table, manual X-axis travel: 585 mm
Cross table, manual Y-axis travel: 240 mm
Dimensions (h x w x d), at column: 1,986 x 1,340 x 1,280 mm
Weight: 780 kg
Mali oglas
Concordia Sagittaria
174 km
Rezkalni stroj
FERVIF0 60V
Klic
Stanje: novo, At variable speed, ISO 40.
Powered cross table on all axes.
3-axis digital readout included.
Base with chip tray.
Coolant system.
LED lamp.
Mechanical speed indicator.
Motorized axes with variable speed and rapid traverse.
Manual pump guideway lubrication system.
Milling capacity with insert cutter:
100 mm.
Milling capacity:
35 mm.
Drilling capacity in cast iron with pilot hole:
60 mm.
Max drilling capacity in steel with pilot hole (S235JR):
24 mm.
Spindle taper:
ISO 40 DIN 2080.
Quill:
86 mm.
Spindle travel:
120 mm.
Head tilt:
+/- 45°.
Vertical head rotation:
+/- 90°.
Kdedsh Im H Sjpfx Af Tjg
Head body rotation:
+/- 180°.
Vertical spindle speed:
(2) 60 ÷ 500 | 500 ÷ 3600 rpm.
Motor:
400 V 50 Hz 2.25 kW.
Distance between spindle nose and table:
45 – 395 mm.
Distance spindle axis – column:
215–450 mm.
Table size:
1246 x 230 mm.
Longitudinal table travel:
850 mm.
Cross table travel:
310 mm.
Max load capacity:
400 kg.
Dimensions:
1680 x 1500 x 2100 h mm.
Net weight:
1000 kg.
Mali oglas
Concordia Sagittaria
174 km
Navpično rezkalni stroj
MEXIM
Klic
Stanje: dober (rabljeno), Used MEXIM vertical knee milling machine
Mould maker’s machine
3-axis DRO WIZARD
Swivelling head
Table size: 660 x 360 mm
Kdjdpfsg Np Enjx Af Tjg
Spindle speed: 20 – 1600 rpm
Olajšamo vam iskanje: "nastavljiv prehoda mills"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.


































































































































































































































