Minarc Mig Evo 200 nakup rabljenega (70.519)

Stanje: zelo dobro (rabljeno), Step clamp (28366) Clamping height: 200 - 250 mm T-slot width: 12 mm Bsdpfx Abeln Ulasxjlp Clamping screw: M10 4 pieces available Weight: 8.5 kg

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Bodpfx Abewc Rk Esxolp Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, MAZAK INTEGREX 200-III ST, 5-osni stružni center, s/n 174623, z upravljanjem MAZATROL 640MT Pro, razdalja med konicami 1 016 mm (40”), zmogljivost palice 63,5 mm (2,5”), nihaj 660 mm (26”), premer struženja 660 mm (26”), hodi: X - 580 mm, Y - 160 mm, Z - 1 045 mm, nagib glave osi B: 225°, indeks osi C: 0,001°, hitrost vretena (glavno/pomožno) 5 000 rpm, pogonska orodja, hitrost pogonskega vretena 12 000 rpm, 40-pozicijski menjalec orodij (ATC), stožec KM63, pomožno vreteno, regulator temperature olja Oil Matic, transporter za odrezke. Bsdpfx Abju A Dgljxslp

Leto izdelave: 2015, Stanje: dober (rabljeno), Zu verkaufen: Gebrauchte, moderne Bystronic Xpert 200/3100 CNC-Abkantpresse, 200t x 3m Bodjgkgwfopfx Abxolp Baujahr/Neumaschine: 2015 Arbeitslänge: 3.100 mm / 3 Meter x 200 Tonnen Presskraft: 2.000 kN / 200 Tonnen Max. Hub: 215 mm Achsen insgesamt: 7 Achsen – Y1, Y2, X, X1, R, Z1, Z2 Hydraulische Bombierung Hydraulische Werkzeugklemmung Vom Bystronic UK-Service seit Inbetriebnahme vollständig gewartet Nur ein Vorbesitzer seit Neukauf Wenig Betriebsstunden, sehr guter Zustand

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Holder for push-through safety device, used Material finish: Sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Blsdpfx Aoipuggebxop Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm For rectangular tube: 50 x 30 mm Weight per unit: 0.930 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Viessmann Vitorond 200 Bjdpfx Ajmnqc Hebxjlp Moč: 160 kW Gorilnik: po želji je na voljo olje ali plinski Weishaupt gorilnik Ogled le po predhodnem telefonskem dogovoru! Prednost imajo prodaja trgovcem, podjetnikom ali za izvoz. Vse informacije so brez garancije, pridržujemo si pravico do napak in predhodne prodaje. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Seveda uredimo tudi vse formalnosti. Nakladanje je možno.

Stanje: dober (rabljeno), Power chuck 200 mm diameter Bjdpfx Aecr S Euobxslp

Stanje: zelo dobro (rabljeno), Profesionalni čelni rezkar priznane blagovne znamke GARANT (Hoffmann Group), namenjen za visoko zmogljivo obdelavo. Skupni premer: 210 mm. Vpenjalna odprtina: 60 mm. Opremljen z izmenljivimi ploščicami – enostavna uporaba, možnost dela v težkih industrijskih pogojih. Zelo dobro stanje, orodje je pripravljeno za uporabo. Idealna izbira za obdelovalne centre in industrijske rezkalke. Bjdpfx Aow Sav Usbxjlp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, Oprema je bila pregledana v pooblaščenem servisnem centru in je pripravljena za uporabo. Nudimo 6-mesečno garancijo. CEA CONVEX 405 Pulse Premium je visokokakovostni varilni izvor MIG/MAG z napredno pulzno in dvojno pulzno tehnologijo. Zasnovan za profesionalno in industrijsko uporabo, ta varilni aparat italijanske izdelave zagotavlja odlično kakovost zvara, enostavno nastavitev s sinergijskimi programi in največjo prilagodljivost. Naprava je rabljena, vendar popolnoma preizkušena in v brezhibnem delovnem stanju, pripravljena za takojšnje delo. Blodpjxl Drlofx Abxep ⚙️ Tehnične specifikacije Model: CONVEX 405 Pulse Premium Območje varilnega toka: 20 – 400 A Delovni cikel (40 °C): 400 A {eta} 60 % / 320 A {eta} 100 % Napajanje: 3~ 400 V, 50/60 Hz Varilni postopki: MIG/MAG, Puls, Dvojni pulz, MMA, TIG Lift Krmilna plošča: sinergijska z možnostjo shranjevanja programov in digitalnim prikazovalnikom Premeri žice: 0,8 – 1,6 mm (jeklo, nerjaveče jeklo, aluminij) Hladilni sistem: zrak ali po izbiri vodno hlajenje (odvisno od konfiguracije) Teža: pribl. 120–140 kg ✅ Ključne lastnosti Načini pulz & dvojni pulz – idealno za aluminij in nerjaveče jeklo. Sinergijski programi – hitra in natančna nastavitev parametrov. Podpora več postopkov: MIG/MAG, MMA, TIG Lift. Stabilen oblok in odlična estetika zvara tudi pri tankih materialih. CEA – italijanska tehnologija, priznana po kakovosti in zanesljivosti. Rabljeno, a pregledano in pripravljeno za delo.

Stanje: zelo dobro (rabljeno), KOMPLETNA TETRA PAK LINIJA MODEL TBA9 200ml SLIM POLNILKA TBA9/200S V130, LETNIK 1993, 52.000 OBRATOVALNIH UR APLIKATOR SLAMIC TUBEX OVIJALNI STROJ TETRA TCBP70 WRAP AROUND TETRA MULTISHRINK 51, pakiranje 2X3 TRANSPORTNI SISTEM LINIJA JE ŠE VEDNO V PROIZVODNJI Bljdpfx Asvvn Ayobxop

Leto izdelave: 2020, Stanje: novo, We are offering you a new shelf connector from the manufacturer Nedcon NS for sale. The delivery scope includes: 01x SET Spacer NR, new Length: 200 mm Material finish: sendzimir galvanized consisting of: Bedpfxsf S Iq Te Abxelp 01x Spacer NR L=200, sendzimir galvanized 02x Hexagon bolts 8.8, M10x25, galvanized 02x Serrated flange nuts, hexagon 8.8, M10, galvanized 04x Hexagon bolts, M10, galvanized

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: Bodpswbh Ifsfx Abxslp ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Leto izdelave: 1996, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80796, Stroj je v odličnem stanju, popolnoma delujoč, potrebno ga je razstaviti na lokaciji v Vilni, Litva. Prodajalec nudi razstavljanje, nakladanje na tovornjak ter dostavo. Bodpfjvddpljx Abxjlp

Stanje: zelo dobro (rabljeno), Prodajam robustno montažno ploščo/strojno mizo z T-utorji. Izdelana iz debelostenske jeklene konstrukcije, pobarvana modro. Odlična osnova za montažo večjih elementov, priprave ali za merilne in obdelovalne namene. Blsdpfx Absw Rdtuexjp • Dimenzije: 2570 x 770 x 200 mm • Površina z T-utorji • Natančno obdelan zgornji del • Masa: 900 kg • Možnost transporta ali nakladanja z viličarjem

Stanje: rabljeno, Bitte nennen Sie Ihren Angebotspreis. Der Preis gilt ohne Verpackung und Transport; Zahlung im Voraus. Falls Sie an der Maschine interessiert sind, unterbreiten Sie uns bitte ein Preisangebot. Bljdjwk Dvqopfx Abxep Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien Der Käufer kann beim Abbau der Maschine mitwirken. Für den Transport der Maschine ist der Käufer verantwortlich. Wir übernehmen lediglich das Verladen der Maschine auf den Anhänger/LKW mittels Gabelstapler bzw. Kran.

Stanje: rabljeno, 200 running meters Schäfer Palflex pallet racking Used equipment in good condition, see photos. Height: 6.5 m Depth: 110 cm, galvanized Bay load: 24,000 kg Beam length: 4.1 m, orange Beam load capacity per level: 3,000 kg Negotiable price: €13,790 net ex stock The offer includes: + 49 pre-assembled frames, depth 110 cm, height 6.5 m + 288 beams, length 4.1 m, load capacity per level 3,000 kg + 576 locking pins + 196 concrete anchors Used corner protectors immediately available, surcharge per piece €15 net! Load capacity labels, documents, etc. are included as standard. You can find further accessories in our accessories catalog. Goods are in stock. Transport and assembly available on request. Bledpfx Aovfnnzsbxjp Inspection possible at any time by prior arrangement. Further information upon request. We always have over 5,000 running meters of pallet racking from various manufacturers in stock. (Specifications, details and prices subject to change or error as well as prior sale! Please refer to our T&Cs, all prices excl. VAT ex stock.)

Stanje: dober (rabljeno), The scope of delivery includes: 01x Shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 100 mm for shelf spacing: approx. 200 mm Blsdpoi Hph Sefx Abxep Dimensions of head plates: 128 x 90 mm Profile dimensions: C 46 x 23 mm Weight: approx. 1.2 kg | each General information about the item: This item is offered for collection only. Delivery or shipment of this item is possible at additional cost, which can be individually requested from us depending on the destination and scope of delivery.

Stanje: kot nova (razstavni stroj), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A UNIT) Alu Edition ✅ Scope of delivery: ➤ Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 water cooling ➤ Fronius torch package with display on the torch (arc, amperage, jobs etc. adjustable directly from the torch) ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Brand new Messer pressure regulator ➤ Gas hose ►►► Perfect for aluminium Bsdpfowbitvsx Abxelp The Fronius TPS 2700 Alu Edition is especially suited for aluminium welding. Precise welding technology – user-friendly operation ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured shipping on pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What condition are the units in? To clarify: We purchase used devices in like-new condition, disassemble them, check everything, replace wear parts where necessary, and only after a successful test weld do we release the units for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn marks or dents scattered across the device! With us you buy an item that is also ⭐worth seeing and doesn’t look worn out! ►►►Do we receive an invoice when buying from you? Yes, with us you get a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are there? Prepayment or cash on collection in person ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packed and insured on an Euro-pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no possibility to provide a warranty. However, the units can be tested and paid for in cash on site. ►►►Why buy from us? We are specialists for this Fronius welding machine series and always have 60–80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we are not familiar with.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Industrial robot Brand: Bsdpfx Asr Iyymobxjlp Hyundai / Hanwha TechM Year of manufacture: 2007 Maximum load capacity: 200 kg

Stanje: rabljeno, Bitte nennen Sie Ihren Angebotspreis. Der Preis gilt ohne Verpackung und Transport; Zahlung im Voraus. Falls Sie an der Maschine interessiert sind, unterbreiten Sie uns bitte ein Preisangebot. Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien Bodpfx Abswk Dycexelp Der Käufer kann beim Abbau der Maschine mitwirken. Für den Transport der Maschine ist der Käufer verantwortlich. Wir übernehmen lediglich das Verladen der Maschine auf den Anhänger/LKW mittels Gabelstapler bzw. Kran.

Stanje: skoraj kot novo (rabljeno), 200 linear metres of shelving system Schäfer R3000 Manufacturer: Schäfer As new condition, see photos! Bedpfx Ajdz Agdebxslp Height: 2.3 m Depth: 50 cm Load capacity per shelf: 100 kg Bay width: 100 cm Asking price: €22,450 net ex works Offer includes: 201 uprights or frames, height 2.3 m, galvanised 800 shelf panels, depth 50 cm, 100 kg load capacity per shelf, galvanised 67 cross bracing sets for stabilisation 4 levels per bay (additional levels available at extra cost) Other configurations available: Heights of 2.3 m, 2.5 m, or 3 m in stock. Transport and installation available on request. Further information on request. Inspection possible anytime by appointment. Over 5,000 linear metres of pallet racking from various manufacturers always in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! Please refer to our terms and conditions. All prices excl. VAT, ex works.) Purchase / Sales We are constantly looking for, or offering, numerous items from various sectors broom-clean company clearances business liquidations Fast - flexible - reliable! We also clear out or dispose for insolvency administrators. Contact us with a few keywords, we will respond immediately. To visit our homepage, please click on our logo!

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Rack connector, used Material color: blue Manufacturer: Feralco For rack spacing: approx. 200 mm Overall length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm End plate: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pieces per side) Weight: approx. 0.41 kg | each Blsdpfx Abek Iuhfjxsp

Stanje: kot nova (razstavni stroj), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device Description / Scope of Delivery: Bljdpfsvlwh Dox Abxjp Fronius TPS 4000 unit with full equipment – top specification! - Power source Pulse 400 Amps - FK 4000 FC cooling unit with optional filter, including flow control (==> if no water is circulating, the unit automatically shuts off to protect the torch hose assembly). - VR 4000 wire feeder with optional rollers underneath + extended interconnecting hose package + metal feed rollers – only premium components used. - Fronius AW5000 torch package with Job Master function on the torch (==> Display on the torch / adjustable amps, job selection, wire feed, and arc control directly on the torch) Photo = scope of delivery. All prices stated are starting prices. Pricing is tailored individually according to configuration requirements. Original price approx. €15,000 (net), offered at 1/3 of the new price. Not comparable to Transsteel scrap. Why buy from us and not somebody else? - We are professionals when it comes to this series of Fronius welding equipment. We always have around 60-80 units in stock. Only these Fronius models – no other brands! - We don’t just pass devices through – all units are dismantled, checked, wear parts replaced, and only once everything works flawlessly do we sell the equipment. - All our devices come with the popular Fronius torches. NO €100 "E*b*a*y" torch, but REAL QUALITY! Fronius torches cost between €650 and €900 net, depending on the configuration! - All our units are clean and have no burn marks on the displays or numerous burn holes / dents on the casing! You get from us an item that is presentable and not completely worn out! - As our customer, you benefit from affordable spare parts and support if needed. - You receive a proper invoice with VAT disclosed. All units can be viewed, paid for, and collected by appointment at our main warehouse in Vienna! Insured palletized shipping is, of course, possible! All prices are starting prices – you can customize your equipment with us. Robot device or manual unit. Long or short interconnecting hose package. Various hose packages available. Synchropulse. 270, 400, or 500 Amp units in stock. CMT version available as manual or robot model. It’s best to call us so we can discuss your application and provide you with an initial price estimate.

Stanje: dober (rabljeno), Technical data of the rack connector: Racking system: SLP Included in delivery: 01x rack connector, used Material colour: blue Bsdpfoipugrex Abxslp Total length: approx. 200 mm End plates: approx. 95 x 41 mm L-profile: approx. 31 x 31 mm

Stanje: dober (rabljeno), Included in delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 350 mm Total width: approx. 200 mm Internal width: approx. 160 mm Total depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimensions: approx. 140 x 140 mm Base plate dimensions: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore diameter: approx. 16 mm Number of bore holes: 04 pcs. Bodpfx Absk T Au Eoxolp Weight / unit: approx. 14.850 kg General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be provided upon request depending on the delivery location and scope.