Lectrostatic nakup rabljenega (112)

Leto izdelave: 2016, Stanje: kot nova (razstavni stroj), Ročna linija za PVC prašno barvanje za 3D panelne ograje (NIKOLI UPORABLJENA) Tip barvanja – elektrostatično Linija za PVC premazovanje je polavtomatska. Potrebni so 2-3 delavci. Kapaciteta peči – 10 kosov 3D panelnih ograj... čas žganja približno 15 minut (z barvo proizvajalca IGP). Seveda je čas žganja odvisen od kakovosti barve in kemične sestave barve. Linija je izdelana po modularnem sistemu, kar pomeni, da se lahko montira na več načinov, glede na možnosti prostega prostora v tovarni. Ksdpfsil Agnox Ah Donc Dimenzije posameznih sestavnih delov linije: 1. Polimerizacijska peč – 2.500 x 3.500 ; višina – 3.200 mm 2. Lakirni kabini (2 kosa) – 3.000 x 2.000 ; višina – 3.200 mm 3. Pralna komora – 2.200 x 3.500 ; višina – 3.200 mm 4. Kad – 2.500 x 2.500 – višina – 900 mm plus dve novi pištoli Gamma.

Stanje: novo, Leto izdelave: 2025, Powder Coating – The perfect layer for lasting protection. Powder coating is a highly effective and widely adopted method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring uniform adhesion to the surface and forming an even coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This step is essential to ensure effective bonding of the powder with the substrate, resulting in a robust and long-lasting coating. A typical powder coating system consists of several components and devices required for the application and curing of powder coatings. Powder spray booth and spray area The booth provides a controlled environment for the application process and ensures uniform powder distribution. Powder coating gun A powder coating gun is used to apply the powder coating to the workpiece. Powder supply system The powder supply system comprises a hopper or container for storing the coating material. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to convey powder from storage to the spray gun. Ksdowf Dpgepfx Ah Donc Pretreatment equipment Pretreatment systems prepare the substrate prior to powder coating application. This may involve processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimal adhesion and durability of the finish. Curing oven A curing oven is a vital component of a powder coating plant. It is used to heat the coated substrate to the appropriate temperature, allowing the powder coating to melt, flow, and cure into a durable surface. The oven commonly features a conveyor or racks to transport coated parts through the curing chamber. Exhaust system An extraction system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, ogrevalna zmogljivost: 1.600 kW (2.175,39 KM), Oprema: dokumentacija / priročnik, topla voda, Grelni kotel Polzenith 1,6 MW, letnik 2007 Zelo dobro ohranjena kurilna naprava znamke Polzenith z grelno močjo 1,6 MW. Kompleten sklop vključuje: - Skladišče goriva. Jeklena konstrukcija s potisnim dnom - Strgalo za transport - Elektrofilter Beth z električno omarico - Dimnik višine cca 12 m - Vse dimovodne cevi - Popolnoma z upravljalno in hidravlično enoto Naprava strokovno demontirana, pripravljena na takojšnje natovarjanje. Knsdpfx Ahew Nrr Ns Dsc

Stanje: dober (rabljeno), Leto izdelave: 2013, številka stroja/vozila: 1305, Offer 21369 Knedpev I Tfdsfx Ah Doc Technical Data - Separation of oil mist in 4 stages - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H13) - Air flow rate: approx. 4000 m³/h - Extraction pipe diameter: 315 mm - Drive - Fan: 400 V / 3 kW - Required space: approx. W 750 x H 2900 x D 750 mm - Weight: approx. 500 kg

Stanje: dober (rabljeno), Leto izdelave: 2012, Exhaust gas filtration system, exhaust filter system, exhaust gas filter, hot gas filter, industrial exhaust filter, air extraction and purification system, filter cleaning system, electrostatic precipitator, filtration unit, oil mist separator, oil mist collector, air filter, mist separator, oil and emulsion mist separator, particulate air filter, industrial filter - Manufacturer: ifs, industrial extraction and purification system, filter type IF-Vario M 1600 - Rated power: 0.75 kW - Suction capacity: 1,600 m³/h Knedjwrcbnepfx Ah Djc - Individual components: see photos - Dimensions: 990/600/H660 mm - Total weight: 100 kg

Stanje: rabljeno, Leto izdelave: 1992, Made in Germany Electrostatic filter Extraction capacity: max. 1200 m³/h Weight: 130 kg Operating voltage: 400 VAC, 50 Hz Current consumption: 0.82 A Knodpfxjv D Dpre Ah Djc

Stanje: novo, Extraction capacity filter unit at nozzle*: 2,420 m³/h Total power consumption*: 1.84 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Sound level*: 72 dB(A) Dimensions (L/W/H) in mm: L 1290 / W 588 / H 595 Colour: RAL 7035 Weight: 118 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage and special colours available upon request Application: Separation of emulsion mist for medium to very large machine workspaces. Your advantages with the COBARON series: - 15 device variants available Knsdpfx Aoh Rfb Heh Dec - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air output - Available with a wide range of filter configurations - High-quality filter media in pre-filter and main filter stages - Separation efficiency of up to 99.95% - Extensive range of installation and connection accessories - Flexible adaptation to application case - Optimum service life - Quality Made in Germany With COBARON, we offer a filtration system that meets today’s diverse machining possibilities and the resulting pollutant profiles. The COBARON combination filter system, even in its standard programme, offers several filter configuration options and can thus be variably configured for many applications. The various COBARON series expansion stages have been specially developed for applications that represent borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the efficiency of the air filter and extends service life. COBARON can be operated as a purely mechanical filter unit with different filter stages, or alternatively configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can, for example, be controlled via laptop.

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Ksdpfsun Sd Usx Ah Djnc Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Kontaktirajte nas še danes!

Stanje: rabljeno, Leto izdelave: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control: Heidenhain TNC 640 Swivel range: -98 to 98 degrees Rotary table diameter: 750 mm Total power consumption: 29 kW Machine weight approx. 16 t Hedelius travelling column machining centre Tiltenta 7 Magnum with infinitely adjustable main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-position tool magazine and NC rotary table integrated in the fixed machine table. Machine features: T7M-3200, operating mode 3 - High-pressure pump 50 bar - Heidenhain TNC 640-T series - Spindle speed 12,000 rpm / 29.0 kW - Extended swivel range TNC/T - Remote control HR 510 - Standby magazine SK40/190 - Taper cleaning station - Slant-bed coolant system 900 l - Internal coolant supply 25 bar - Pre-filter for slant-bed coolant system - Electrostatic exhaust filter T / 2x1300 - Compressed air nozzle at spindle head Kedpfxswfqqks Ah Dsnc - Internal compressed air supply - Blow-off guns - Rinsing guns - Infrared receiver M&H 91.40 - 3D infrared measuring probe M&H 25.50 - Tool setter M&H 35.70 - Work area partition T7 with sliding door Control on: 33163:56:22 Machine on: 24185:07:21 Program runtime: 16784:12:57 Spindle: 11751:13:08

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 0001, Offer 24587 Technical specifications: - Electrostatic filter with indicator light - Extracted and purified air is returned to the workspace - Wall-mounted version with two articulated extraction arms - Articulated extraction arm length approx. 9000 mm - Air flow rate approx. 4700 m³/h Knodpfown Egrox Ah Djc - Active filter surface area 9.2 m² - Drive - Fan 400 V / 0.75 kW - Required space approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Stanje: dober (rabljeno), Airless brizgalna naprava, lakirni aparat, Spraypack, naprava za brizganje barve, sistem za brizganje barve, lakirna črpalka, elektrostatična brizgalna naprava, airless kompletni sistem, pnevmatske batne črpalke, airless visokotlačna črpalka, zračni motor, AIR MOTOR -Proizvajalec: Wagner, Airless brizgalna naprava Tip: 33-70 s transportnim vozičkom in brizgalno pištolo -Maksimalni pretok materiala: 12,6 l/min -Vhodni zračni tlak: max. 8 bar, delovni tlak max. 264 bar -Posamezne komponente: glejte fotografije -Dimenzije: 830/680/V1140 mm -Teža: 50 kg Kedpfxow U T Ats Ah Dsnc

Stanje: rabljeno, Leto izdelave: 1992, Made in Germany Electrostatic filter Knedev D Drmjpfx Ah Dsc Extraction capacity: max. 2200 m³/h Weight: 150 kg Operating voltage: 400 VAC, 50 Hz Current consumption: 3.2 A

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna masa: 95 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Suction capacity at connection*: 2200 m³/h (free-blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Sound level*: 65 dB(A) Dimensions L/W/H in mm: L 1623 / W 508 / H 545 Kedpfx Ahoum Uzas Donc Colour: RAL 7035 Weight: 91 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or custom colour available on request Filter configuration*: - 40 mm aluminium mesh pre-filter (optional/retrofit: PrePac pre-filter kit) - 1 electrostatic filter cell - 20 mm aluminium mesh post-filter (optionally: 40 mm post-filter variants) OPTIONAL: Multiple pre-filter kits possible Application: Horizontal electrostatic air cleaner with EC radial fan for the separation of oil mist, emulsion mist, and smoke from workshop air in recirculation mode. Vertical raw air intake via suction elbow with intake nozzle. Clean air recirculation through adjustable diffusion grille. Your advantages with the ELBARON series: - 6 device variants available - Direct from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and airflow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of airflow rates available - Adaptable to contaminant load and airflow requirements - Large range of installation and connection accessories - Quality made in Germany We have developed our hall extraction systems as a cost-effective alternative to expensive central extraction systems or complex single-machine extractions. This allows you to protect your employees' health and preserve your production facility without major investments. The ELBARON® filter series has been developed for use in machining processes with neat oil and for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filter units on the market and are in use worldwide.

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Ksdsv Drigepfx Ah Dsnc Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: rabljeno, TECHNICAL DATA - Distance between centres: 200 mm - Centre height: 100 mm - Travel (X/Z): 130 / 170 mm GRINDING WHEEL HOLDER SPINDLE HEADSTOCK - Wheel dimensions: 400 x 63 x 127 mm - Peripheral speed: 45 m/sec - Power: 3 kW - Orientation: 30° WORKPIECE HOLDER SPINDLE HEADSTOCK - Taper: MT4 - Speeds: 600 - 3000 rpm - Power: 0.5 kW Kedpjuhbxmefx Ah Donc - C axis indexing accuracy: +/- 0.5° TAILSTOCK - Taper: MT2 - Quill stroke: 30 mm ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 19 kVA DIMENSIONS - Space requirement: 1760 x 2180 mm - Height: 2630 mm - Weight: 4,000 kg MACHINE HOURS - Hours under power: 46,943 h - Operating hours: 21,529 h ACCESSORIES - CNC FANUC 16TB - Options: Studer Release B, Pictogramming - Interface: RS232C - Electronic offset levers - Direct measuring systems on X and Z axes - Tailstock with fine concentricity adjustment - Hydraulic retraction of tailstock quill - Swivelling dressing wheel on table: FISCHER AES-72x230/3 - Grinding wheel dynamic balancing: DITTEL HBA 4000 - Diameter measuring device: MOVOMATIC ES400 - Loading/unloading robot system: FELSOMAT - Automatic front door - Coolant system - Electrostatic extraction: ELOSTA BF2000 - Pneumatic collet chuck - 1 grinding wheel holder - 1 grinding wheel - Support arm for zero-G grinding wheel change - 1 balancing shaft

Leto izdelave: 2022, Stanje: novo, Powder Coating Booth Direct from Manufacturer Model: KPO-3 Booth Type: Open Working dimensions (W/H/D): 2800 x 1800 x 1000 mm External dimensions: 2800 x 2300 x 1700 mm Weight: 550 kg Power supply: Electric Power: 2.2 kW Voltage: 380V Frequency: 50-60Hz Filters: Polyester Exhaust air volume: 10,200 m³/h Number of filters: 3 Filter mounting: Bayonet type, easy on/off Fan noise: 74 dB(A) Filter area: 22.5 m² Filter cleaning system: Pneumatic – Jet Venturi Fan type: Aluminium impeller rotor, 2 units Warranty: 12 months * Option: GERMAN-SPEAKING CONTACTS IN GERMANY JUST ASK FOR DETAILS Kedpfxsbuyr To Ah Dsnc Net price Delivery time: approx. 8 to 12 weeks after order Shipping costs calculated individually. Custom units based on your requirements are also available – just ask. More information at: Powder coating, electrostatic painting, powder booth, powder coating system, powder coating plant, powder coating, booth for powder coating, surface technology, powder gun, powder guns, curing oven, powder oven, industrial oven, INDUSTRIAL OVEN recirculating curing oven powder oven Romer Deutschland GmbH

Stanje: rabljeno, Digitalni brusilni stroj Woodtronic NC3 za brušenje čelne in hrbtne strani karbidnih krožnih žag v dveh korakih. Delovno območje: ročno nalaganje Premer: 80–750 mm (opcija do 1000 mm), izvrtina od 10 mm Zobje: vse oblike, tudi posebne oblike zob Glavna oprema: Knjdpsw Uc A Nsfx Ah Dec - 3 CNC osi - Industrijski PC s Siemens avtomatom - Elektrostatični odsesovalec oljne megle - Programska oprema za vse vrste zob, tudi posebne - Klimatizacija električne omare (opcijsko) - Posoda 70 litrov, črpalka 1 bar – 60 litrov/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Suction pipe: 180 mm Knodpovrg S Sofx Ah Djc Voltage: 230 V, 50 Hz / 60 Hz Filter surface area: 6.0 m² Airflow capacity: 1,000 m³/h Total power requirement: 0.3 kW Machine weight approx.: 78 kg Dimensions (LxWxH): 400 x 600 x 700 mm Electrostatic separator: Filter chamber (LxWxH): 360 x 510 x 500 mm 3 inserts with: - Pre-filter (braided stainless steel) 500 x 370 x 20 mm - Ionizer/collector cell 500 x 370 x 210 mm - Post-filter (braided stainless steel) 500 x 370 x 20 mm

Stanje: novo, Extraction capacity (filter unit at nozzle*): 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 68 dB(A) Dimensions L/W/H in mm: L 1290 / W 345 / H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Knsdpfx Ash Rfbqsh Doc Special voltages or colours available on request Application: Separation of emulsion mist, suitable for medium to very large machine workspaces. Your benefits with the COBARON series: - 15 device variants available - Direct from the manufacturer - ISI-TRONIC standard (digital filter control system) - Electronically controlled EC fan as standard - Adjustable speed and air volume - Available with various filter configurations - High-quality filter media for pre-filter and main filter stages - Separation efficiencies up to 99.95% - Extensive range of mounting and connection accessories - Flexible adaptation to your application - Optimised service life - Quality Made in Germany With COBARON, we offer a filtration system that accommodates today’s wide range of machining processes and their respective contaminant profiles. Even within the standard range, the COBARON combination filter system offers various filter configurations and thus can be variably adapted to numerous applications. The different expansion stages of the COBARON series have been specifically developed for applications that are borderline cases for many filter systems (mechanical or electrostatic). Combining both proven filter principles in the appropriate application increases the effectiveness of air filtration and extends service intervals. COBARON can be operated as a purely mechanical filter device with various filter stages, or additionally configured with an electrostatic filter cell. Our filter units already come standard with digitalisation features and, for example, can be controlled via laptop.

Stanje: novo, Leto izdelave: 2025, dolžina transportnega traku: 3.000 mm, Paint System. Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Painting System Oven/Dryer Technical Data: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24,000 overhead conveyor system • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24,000 overhead conveyor • Convection (uniform temperature distribution across the entire oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: • Working dimensions: 2800 x 2200 mm • Fan power: 2.2 kW • Airflow: 10,500 m³/h • Very quiet operation • Automatic filter cleaning • LED lighting Wagner Sprint 2 Electrostatic Applicator CHOOSE BUMEX SP. Z O.O. High-quality machinery on the market. Professional consulting and service. Warranty. Knjdoguku Uspfx Ah Dsc Warranty and post-warranty support. Comprehensive technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are EC-certified. We offer our own transport – prices are calculated individually based on the offer. We issue invoices with VAT shown separately. Short delivery times! Machines available in various customer-specific configurations and sizes! Contact us today.

Leto izdelave: 2013, Stanje: kot nova (razstavni stroj), Tehnični podatki: - Peskanje + linija za elektrostatno lakiranje z uporabo tekočih barv - Proizvajalec: IKL AUSTRIA - Dimenzije kovinskih delov: maks. 400 x 2000 mm - Dva robota - Kapaciteta: 400 steklenic na dan - Linija vključuje: Knsdpfxshtlw Re Ah Djc 1. Peskalno linijo 2. Linijo za elektrostatno lakiranje

Stanje: rabljeno, Leto izdelave: 2011, Širina materiala: 850 mm 1. Sistem za odvijanje in vodenje materiala - Odvijalnik z nadzorom konstantne napetosti materiala - Enota za poravnavo in stabilizacijo materiala Knsdpowya Tkjfx Ah Doc - Elektronsko krmiljena vhodna enota s preciznim upravljanjem napetosti - Popoln pogonski sistem za natančno vodenje materiala 2. Sistem za navijanje - Enogredni navijalnik, maksimalni premer: 1000 mm - Konstanten nadzor napetosti za stabilno navijanje 3. Površinska obdelava in čiščenje materiala - Enota za korona obdelavo za optimizacijo površinske energije (pred tiskom) - ACE enostranski čistilec materiala z dotikalnim valjem za odstranjevanje prahu in delcev 4. Tiskarske enote Del za fleksotisk - 8 fleksotiskarskih enot z: - Tiskarskim bobnom - Odstranljivim vpenjalnim predalom za barvo (brez aniloks valjev) - Opcije za fleksotiskarske enote: - Eksplozijsko-varna izvedba (posamično po tiskarski enoti) - Sistem hlajenja bobna - Lahki aniloks valji: - 5 enot (195–300 lpi) z zobnikom - 5 enot (>300 lpi) z zobnikom - 24 tiskarskih tulecev z utori - 2 dodatna predala za barvo (pladenj + gumijasti valj) - 1 voziček za barvne predale (3 reže – 2 v uporabi + 1 rezerva) Posebne fleksotiskarskih enote - 1 voziček za hladno folijo - 1 pomična enota za nanos hladne folije (prenosljiva na katerokoli tiskarsko postajo, brez vodil) Del za globoki tisk (rotogravura) - 1 rotogravurna enota za čelno ali hrbtno tiskanje, opremljena z: - Nagibno prečko za tisk na hrbtni strani - Zasnovana za nanos hladne lepilne mase PETROCOLL (2,8–3,2 g/m² pri 180 m/min na papir) - Rotogravurni voziček za mobilno pozicioniranje - Razširjen sistem sušenja z vročim zrakom: - “Super Hood” s 32 visokoučinkovitimi puhalniki - Ogrevanje z gorilnikom na zemeljski plin - Vgrajena hladilna enota - Elektrostatika za pomoč pri prenosu barve - 3 rotogravurni tiskarski formati (16''–26'') - Viskozimeter za barvo na osnovi topil - Črpalka in rezervoar za dovod barve 5. Sistem sušenja in UV strjevanja - 8 UV sušilnikov, vsak 22 kW – po eden na vsako tiskarsko postajo - Integriran hladilni sistem za UV svetilke - Hlajenje bobna za temperaturno občutljive materiale 6. Enote za izsekovanje in dodelavo - Rotacijska izsekovalna enota, delovna širina do 530 mm - Osnova za izsekovalno postajo - Sistem odstranjevanja obrezov (do širine 530 mm) - Tlačni sistem za odpadni material (omejitev 530 mm) 7. Razrezni del - Sistem škarjastih nožev za razrez - 6 Helios nožev v škatlasti izvedbi s samoostrilnimi protinoži

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Working width: 2200 mm, number of sections: 6, equipped with Beta three-roll foulard, Mahlo straightening unit, Mahlo Movicat weft insertion device for punching basis weight samples, Brückner turner winder, heat recovery in exhaust air (1x air/air stage and 1x air/water stage), and electrostatic filter for exhaust air purification. Knodpfxjpy Eufo Ah Dsc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter Ksdpfx Aewh Rp Eeh Djnc - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: novo, Extraction capacity of filter unit at connection*: 2,600 m³/h (free intake) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 66 dB(A) Dimensions L/W/H in mm: L 1160 / W 508 / H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (in emulsions with higher oil content), and smoke, for small to very large machine workspaces | Oil mist separator Your benefits from the ELBARON series: Ksdpfx Aepkwaujh Dsnc - 18 device variants available - Directly from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air output - Available as simplex (single-stage) or duplex (two-stage) - Various air performances available - Adaptable to pollutant load and air performance needs - Wide range of installation and connection accessories - Quality made in Germany We developed the ELBARON® filter series for use in pure oil machining applications and for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have counted among the most powerful filter units on the market and are in use worldwide. Our filter units are already optionally digitized and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 device variants and can be optimally configured in size and performance for your application. ELBARON® units impress with long service lives and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiencies, service lives, and trouble-free operation from an economic perspective.