Laura Cevi Upogibni Stroj nakup rabljenega (28.713)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, Premer cevi (maks.): 51 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 Die Sets (1 set of Rolling Dies and 2 sets of Bending Dies, or 3 sets of Bending Dies, as per requested dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feeding Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H, V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending simulation • Collision simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Working Material Length • Calculation of Estimated Bending Time • Conversion from X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop Feature • Remote Assistance • Mandrel Bending and Non-Mandrel Bending • Safety Plate at the Rear of the Bending Head Gbodpfxoxircae Ahmen • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Slide System • Hydraulic Chuck Clamp • Electrical Panel Safety Lock and Panel Key Lock • Electrical System Cooler • Overload Protection • Detailed Working Report Sent Automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional Die Sets • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Extra Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kw Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, Premer cevi (maks.): 65 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of workpiece length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Emergency-stop mobile foot pedal • Remote assistance • Mandrel and non-mandrel bending • Safety plate behind the bending head Gbsdpfx Asxircgehmon • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic gripper clamp • Electric panel safety lock and key lockable panel • Electric system cooler • Overload protection • Detailed operation reports sent automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Extra mandrel length (up to 6 m) - per meter • Ball mandrel and wiper die • Automatic mandrel lubrication system (for suitable pipe diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum Capacity mm Ø65x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances Adjustable Bending Power kW 22.5 Dimensions (LxWxH) mm 6350x1400x1600 Weight kg 3950

Stanje: rabljeno, Avtomatski stroj za upogibanje cevi Gbodpfx Aex Swbishmsn Blagovna znamka: B.L.M. Model: B/90/M Avtomatski stroj za upogibanje cevi, zasnovan za industrijsko uporabo, opremljen z avtomatskim programiranjem za izvedbo več zaporednih upogibov. Stroj omogoča nastavitev oddaljenosti naslona, kar zagotavlja natančnost in ponovljivost procesa upogibanja. Za vse tehnične podrobnosti glejte tehnične liste v fotografijah.

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Gjdpfx Ahsy E Schomsbn Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: zelo dobro (rabljeno), You are bidding here on: a branded guillotine shear and folding bench from a very reputable and well-known manufacturer - Schechtl. Device specifications: Guillotine Shear HT 200: - Capacity: 1.25 mm steel, also aluminum, etc., potentially more - Cutting length: just over 2 meters (blades in excellent condition, see pictures; the original imprint is still visible, which usually fades with frequent use) - Depth gauge - Light beam with LED for cut line illumination - Extendable front support Folding Bench: - KS - Capacity: 1 mm steel, more for aluminum, approx. 1.5 mm - Bending length: just over 2 meters - Foot-operated closure - Optional depth stop or bead former - Auxiliary rail - Round rollers and various rails Sale according to §25a UStG (Differential taxation) The machines are in good used condition and ready for immediate operation. They come from private ownership. Important! Optionally, you can find and purchase a wide selection of machinery and machine accessories in our shop—everything related to sheet metal and steel processing, such as folding machines, guillotine shears, drill machines, round bending machines, slitting and profiling machines, accessories like beading units, round rollers for gutter production, back gauges, etc., as well as various hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice in accordance with §25a UStG (VAT included; differential taxation applied). Free loading is available—weight approx. 750 kg and 650 kg respectively. Inspection and testing are possible and encouraged by prior telephone appointment. Gbodpfjy T H Nxox Ahmsn Payment in cash upon collection. Take advantage of our expertise—we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the auction ends. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item numbers: Folding Bench KS 260504 & HT 260505

Stanje: dober (rabljeno), You are bidding here on a branded folding machine from a very reputable and well-known manufacturer – Schechtl. Device features: - Folding machine Schechtl KSV – reinforced model - Bending rail bends cleanly - Angle indicator - Bending length just over 2 m - Sheet thickness: 1.5 mm (steel sheet) – more for aluminium, zinc, etc., up to 2 mm - Standard rail – radius for aluminium and zinc is also optionally available! - Round rollers as shown in the picture - Optional: backgauge, 500 mm; additional rails available - Guillotine shear Schechtl - Working length: 2 m - Sheet thickness: 1.5 mm (aluminium more) - Backgauge: 500 mm - Extendable sheet support table - Optional: further accessories and tools available, such as beading machine, tube bars, holders, tools, etc. A suitable manual guillotine shear is also available; if required, please request a set price and I will configure it for you accordingly. Important! Optionally, you can find and purchase many machines and machine accessories – such as various rails, backgauges – everything needed for sheet metal and steel processing, like folding machines, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines, accessories (beading devices, round rollers for gutter production, rear gauge, etc.), as well as additional hand tools and spare parts from top manufacturers. For any questions, I am always available. You will receive an invoice with VAT shown separately. Gbedpfxoy Rtb Aj Ahmsn Free loading possible – weight approx. 950 kg and approx. 1,000 kg Inspection and testing are possible and encouraged after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer themselves (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item numbers: Folding machine KSV, guillotine shear MT

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Profi-Rohrbiegemaschine mit hydraulischem Antrieb. Geeignet für Stahlrohre, Edelstahl, ggf. dickwandige Kupferrohre. INKLUSIVE Holzkiste mit umfangreichem Set an Biegeformen / Biegesegmenten (siehe Foto) - das macht den eigentlichen Wert aus, da Biegesegmente neu sehr teuer sind. Ideal für Heizungsbauer, Sanitärbetrieb, Stahlrohrbau, Anlagenbau, Lehrwerkstätten. Mit dem mitgelieferten Set sind verschiedene Durchmesser direkt biegbar. Technische Daten: Gsdpfx Ahszab Emomobn - Bauart: hydraulische Rohrbiegemaschine, Standgerät - Antrieb: Drehstrom 400 V / Hydraulikaggregat - Biegeformen: umfangreiches Set vorhanden (Holzkiste, siehe Foto) - Aufbau: Stahlgestell, fahrbar / standortgebunden - Anwendungsbereich: typ. Rohr-AD 20-60 mm (vor Ort prüfen) - Baujahr: ca. 1980er-1990er Abholung / Transport: Selbstabholung mit Stapler. Verladung vor Ort möglich. Speditionsversand auf Palette nach Absprache.

Stanje: zelo dobro (rabljeno), You are bidding here on a branded guillotine shear from the renowned German manufacturer Schechtl, in absolutely top condition! Device features: - Shear MSB 200 - Cuts up to 3 mm steel (see nameplate), significantly more for aluminum - Working length: just over 2 m - Manual rear stop 500 mm - Side / angle stop - Foot pedal - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length just over 2 m - Sheet thickness: steel up to 3 mm, aluminum and zinc significantly more - The machine was used extremely rarely, approx. 1-2 times per month for thin sheet metal by a lamp manufacturer - Hardly any signs of use – this condition is rare - The total price is less than half of the current list price – price list is from last year! If you have questions, feel free to call briefly. We have this set twice, as well as other models such as Schechtl MAX 200 (2.5 mm) or MA 200 (2 mm). Current net price for both machines – see pictures. You will receive an invoice with VAT shown separately. Freight forwarding can be arranged if desired; forklift available on site. Free loading, as shown in the pictures. Inspection and testing possible by appointment via telephone. Payment in cash upon collection – if there is anything else I can do for you, please give me a quick call – thank you. Collection should take place within 8 days after the end of the auction. Item number Gbedpfx Aewfzztohmon

Stanje: dober (rabljeno), You are bidding here on a guillotine shear and folding machine from the renowned German manufacturer Schechtl. Device specifications: Guillotine Shear MSB 200 - Cuts 3mm steel – significantly more for aluminium - Cutting length just over 2m - Front support table Gedpfx Ahjyviwqsmobn - 500mm back gauge - Optional sheet metal tray - Free loading possible Folding Machine Schechtl MAX 200 - Rail bends cleanly – test possible - Angle display - Bending length just over 2m - Sheet thickness: 2.5mm for steel – more for aluminium, zinc, etc. - Standard rail – radius rail for aluminium and zinc available as an option (as an attachment or special rail) - Foot switch for operation - Optional back gauge We also have Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2mm), RAS machines with segmented tools (2m, 2mm), and many others from 1m to 6m. You will receive an invoice with VAT shown separately. Shipping can be arranged on request. Free loading as shown in the pictures. Inspection and testing are possible by telephone appointment. Payment: cash on collection. If you have any further questions, please give me a quick call – thank you. Collection should take place within 8 days after the auction ends. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Stanje: rabljeno, Pedrazzoli UNIVERSAL BROWN 42 CN 1-axis tube bending machine. Maximum bending capacity: 42×2.5 mm. Gbodpfoqgd Ekox Ahmsn Minimum internal bending radius: 22 mm. Maximum median bending radius with rollers: 260 mm. Maximum bending angle: 185°. Maximum tube length to be bent: 3100 mm. Installed power: 5.5 kW. Dimensions: 4700x800x1300 mm. Weight: 1100 kg.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, številka stroja/vozila: 1033, skupna masa: 290 kg, moč: 0,55 kW (0,75 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: nožno daljinsko upravljanje, Ponujamo popolnoma nov stroj za zapiranje okroglih cevi OSTAS OKS-1300, letnik izdelave 2024. Proizvajalec: OSTAS Model: OKS-1300 Letnik izdelave: 2024 Vrsta stroja: Stroj za zapiranje okroglih cevi Gbodpeza Tyiofx Ahmjn Stanje: kot nov Za vprašanja ali dodatne informacije nam lahko pišete ali nas pokličete.

Leto izdelave: 1993, stanje: delavnici obnovljeno (rabljeno), leto – 1993 / 2020 popolnoma obnovljen s sistemom PLC vodenja največji premer cevi: 100 mm debelina stene – 10 mm največja dolžina vleka cevi – 6000 / 12000 mm krivljenje s trnom do debeline stene cevi 4 mm; krivljenje brez trna od debeline stene 5,0 do 10 mm natančnost kota krivljenja ± 0,2 ° Gsdpfx Aoiau Uushmobn skupna priključna moč – 50 kW teža stroja pribl. 6 t

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, Premer cevi (maks.): 6.090.115 mm, Debelina stene cevi (maks.): 3 mm, število osi: 3, delovna višina: 700 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, obratovalni tlak: 200 letvica, tlak (maks.): 200 letvica, število digitalnih zaslonov: 3, Oprema: CE označba, dokumentacija / priročnik, hitroizmenjevalna naprava, nujno zaustavitev, Valjčni hidravlični stroj z limpetno tuljavo za oblikovanje polkrožne cevi iz ploščatega nerjavečega jeklenega traku in upogibanje v želeni radij s spiralno kontinuirano obliko. - Izstopne gredi premera 80 mm - Zamenljiv komplet valjev na gredih za različne dimenzije cevi: 60 mm, 90 mm, 115 mm - Držalo za kolut z vodilno klopjo za odvijanje in poravnavo jeklenega traku do valjalnega stroja - Spodnji sredinski ščipalni valj nastavljiv za oblikovanje polovične cevi Gsdpfx Ahsyik Hcsmjbn - Digitalni prikaz položaja za določanje premera upogiba tuljave, koraka navitja ter oblikovanja polcevi - Hidravlična roka, gibljiva v treh smereh, za nastavitev koraka spiralnega navitja - Zgornja vertikalna podpora hidravlično upravljana za držanje oblike navitega premera in zbiranje tuljav v območju premerov od 700 do 3000 mm - Operaterska konzola z električnim upravljanjem, tipkami in digitalnim prikazom položaja za dolžino tuljave, radij upogiba in obremenitev pri oblikovanju. - Priložena so servisna in uporabniška navodila.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, številka stroja/vozila: AR200 tube and profile roll, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Delsy, model krmilnika: MG Touch Pro 15", Premer cevi (maks.): 273 mm, Debelina stene cevi (maks.): 20 mm, Kot upogiba (maks.): 200 °, število osi: 9, delovna višina: 2.200 mm, skupna masa: 27.000 kg, skupna dolžina: 2.850 mm, skupna širina: 2.950 mm, skupna višina: 2.930 mm, moč: 29,42 kW (40,00 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, obratovalni tlak: 240 letvica, število digitalnih zaslonov: 6, Oprema: dokumentacija / priročnik, nujno zaustavitev, Profilová ohýbačka model AR200 značky MG srl, letnik 2016. Priložena je tabela zmogljivosti stroja. Model AR200. Valj za upogibanje cevi: 2 kompleta valjev za cevi, premeri 159 mm in 139,7 mm. Konfiguracija: - Piramidna izvedba z dvojnim stiskanjem stranskih valjev, neodvisno hidravlično upravljanje - 3 pogonski valji, hidravlični pogon z gonilom na vsaki osi - Stranska roka levo/desno hidravlično premična v 3 smereh, profil med upogibanjem ostaja poravnan Krmilna konzola: NC programabilna z možnostjo samodejnega valjanja, 15'' zaslon na dotik, prikaz 9 osi stroja z odčitavanjem za ročno uporabo in popolnoma programabilnim avtomatskim oblikovanjem Električno napajanje: 3-fazno, 400/50 Vac, 40 HP Gbodpfsyx A Uuox Ahmjn Priložena originalna servisna in uporabniška dokumentacija. Dodatni kompleti valjev in orodja na voljo za upogibanje profilov HEB, IPE, UNP, KOTNIK, T profil, cev, ploščato železo na robu – glejte priloženo tabelo zmogljivosti.

Stanje: dober (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 7053055966, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 30 A, stiskalna sila: 160 t, hod: 175 mm, dolžina mize: 4.050 mm, kapaciteta rezervoarja za olje: 150 l, skupna dolžina: 5.000 mm, skupna širina: 2.170 mm, skupna višina: 2.800 mm, skupna masa: 11.620 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Upogibni stroj bo na voljo od oktobra do novembra. Za dodatne informacije nas prosimo kontaktirajte. Gbsdpezc H Apofx Ahmjn

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €102,300 Leasing rate: €1,933.47 Pressing force: 80 tons Bending length: 2,550 mm Axes: 4 Stroke: 320 mm Distance between uprights: 2,840 mm Installation height: 500 mm Drive concept: servo-motorized belt drive Rapid traverse Y-axis: 105 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 105 mm/s Back gauge travel X-axis: 650 mm Back gauge travel R-axis: 250 mm Length: 3,700 mm Width: 2,200 mm Height: 2,550 mm Weight: 6,400 kg Servo-motorized drive Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) CNC control DELEM DA-66S - 17" 2D graphics display - 3D visualization in simulation and production - Intuitive touch screen operation (easy drawing of bending contours with finger) - Simple and convenient data transfer - Multi-simulation capability - User-friendly dialog programming - Graphical simulation of bending process Servo-driven back gauge with linear guides and ball screws Back gauge finger blocks with double linear guides Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground BLVT light barrier safety system Sheet support arms with linear guides Side and rear safety barriers Equipment in accordance with CE regulations Operating instructions in GERMAN or ENGLISH Advantages of this design: - No reduction of working width due to side frames, distance between uprights is larger than the bending length - Up to 30% higher productivity versus conventional hydraulic press brakes due to almost instantaneous pedal signal response - Minimal frame deflection - No crowning system required as bending force is applied over many points along bending length - High repeatability and bending accuracy throughout entire bending length - Low energy consumption - No hydraulic components Godpfxsynndfo Ahmebn Options: CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €159,300 Gsdpsynm Atofx Ahmebn Leasing rate: €3,010.77 Pressing force: 320 t Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,600 mm Throat depth in side frame: 410 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Length: 5,300 mm Width: 1,910 mm Height: 3,230 mm Weight: 20,100 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy contour drawing with your finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the blank length for sheet cutting - Automatic bending sequence calculation - Graphical product and tool memory - Correction capabilities - USB ports and Ethernet connection for import, backup, and program export - Operating system Windows - Import support for IGES, STEP, DXF files Backgauge with servo drive on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, split and goosenecked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during ram movement - Low energy consumption - Low noise emissions - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €74,800 Lease payment: €1,413.72/month Pressing force: 40 tons Bending length: 2,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 200 mm Distance between uprights: 1,700 mm Throat depth (side frame): 350 mm Installation height: 440 mm Drive system: servo motor-driven spindle Rapid traverse (Y axis): 180 mm/s Working speed (Y axis): 10 mm/s Return speed (Y axis): 115 mm/s Backgauge travel range (X axis): 650 mm Backgauge travel range (R axis): 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 2,600 mm Width: 1,450 mm Height: 2,650 mm Weight: 4,400 kg Gbsdsynm A Hspfx Ahmjn STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X, and R) - Color graphics controller DELEM DA-66S • 17" color touchscreen • 3D visualization in simulation and production • Suitable for full Windows applications • Compatible with Delem Modusys • USB and peripheral interface • User-specific application support • Sensor, bending, and correction interface - Servo-driven backgauge on linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and gooseneck - 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Low energy consumption - Compact spindle drive unit with a low number of individual components - No hydraulic components Options: - Z1/Z2 axes - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Gsdoynmxnepfx Ahmebn Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €187,100 Leasing rate: €3,536.19 Press force: 400 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3400 mm Throat depth (side frame): 410 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Motor: 2 x 11 kW Length: 5750 mm Width: 2110 mm Height: 3450 mm Weight: 27,780 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easily draw the bending contour by finger) - User-friendly dialog-based programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of developed length for blank cutting - Automatic bending sequence calculation - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Godpfjwir A Aox Ahmsbn Fiessler AKAS laser safety device mounted on the upper beam Sheet support arms on linear guides Equipment in accordance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with option to import 3D files

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €231,900 Pressing force: 400 tons Bending length: 6050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between uprights: 5100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 150 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 150 mm/s Backgauge travel X-axis: 750 mm Oil tank: 160 l Length: 7500 mm Width: 2110 mm Height: 3810 mm Weight: 34,600 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (simple drawing of the bending contour with your finger) - User-friendly programming via dialog, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory Gbjdpfx Ahewir Avemen - Correction options - USB ports and Ethernet connection for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and goosenecked 4-way die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks after order Country of origin: Turkey Price: €98,300 Leasing rate: €1,857.87 Pressing force: 135 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth: 410 mm Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 200 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 4,200 mm Width: 1,680 mm Height: 2,750 mm Weight: 9,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphical display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch screen operation (easy finger drawing of bending contours) - User-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of bending sequence - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal blank - Automatic calculation of bending sequence - Graphical product and tool memory - Correction capability - USB ports and Ethernet interface for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on the upper beam Sheet supports on linear guides Compliance with CE regulations Oil filling Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emissions Gbjdpfx Aswirr Rohmjn - High speed Options: Z1/Z2 axes CNC controller Delem DA-66 S CNC controller Delem DA-69S 3D incl. PC software Profile-S with 3D file import Quick-clamping lever for the top tool

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,920 Leasing rate: €1,094.69 Pressing force: 60 t Bending length: 2050 mm Axes: 3 (Y1, Y2, X) Stroke: 265 mm Distance between uprights: 1700 mm Throat depth: 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid approach speed Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 110 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Gbjdjwirivopfx Ahmjn Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 100 l Motor: 7.5 kW Length: 3200 mm Width: 1550 mm Height: 2850 mm Weight: 5600 kg Backgauge: 650 mm 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 2D graphic display, 15" - Intuitive touch-screen operation (simple drawing of bending contour with finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of blank length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software so that programs can be created on a PC and then transferred to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet supports on linear guides Equipment according to CE regulations Oil filling included Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Increased stroke, installation height, and throat depth - Higher approach and return speed of upper beam - Higher backgauge speed - Backgauge fingers on double instead of single linear guides - More options available, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls … OPTIONS: R-Axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamps for the upper tool

Stanje: novo, Condition new Delivery time approx. 14-16 weeks from order Country of origin Turkey Price €202,100 Lease rate €3,869.08 Pressing force 320 t Bending length 6050 mm Godpjwirgnofx Ahmebn Axes Y1 / Y2 / X and R axis Stroke 365 mm Distance between uprights 5100 mm Throat depth (side frame) 450 mm Installation height 630 mm Drive concept hydraulic Rapid traverse Y-axis 160 mm/s Working speed Y-axis 10 mm/s Return speed Y-axis 160 mm/s Backgauge travel X-axis 650 mm Backgauge speed X-axis 500 mm/s Backgauge stroke R-axis 250 mm Table height 1100 mm Table width 154 mm Oil tank 160 l Length 7500 mm Width 1910 mm Height 3350 mm Weight 29000 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D representation of programmed workpiece - Intuitive touch-screen operation (easy contour drawing by finger) - User-friendly programming via dialog, selectable in 2D or 3D mode - 2D and 3D simulation of the bending sequence - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal blanks - Automatic bending sequence calculation - Graphical product and tool memory - Correction options - USB ports and Ethernet for import, backup and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die set 60x60 2009 (V = 16, 22, 35 and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guide Equipment in compliance with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics only operate during ram movement - Low energy consumption - Low noise emissions - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order date Country of origin: Turkey Godpfxewirfqe Ahmobn Price: €123,713 Leasing rate: €2,338.18 Pressing force: 320 t Bending length: 4,050 mm Axes: Y1 / Y2 / X Axis Stroke: 365 mm Distance between uprights: 3,600 mm Throat depth (side stand): 450 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y axis: 160 mm/s Working speed Y axis: 10 mm/s Return speed Y axis: 140 mm/s Backgauge speed X axis: 500 mm/s Backgauge speed R axis: 350 mm/s Backgauge travel R axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 250 l Motor power: 18.5 kW Length: 5,250 mm Width: 1,770 mm Height: 2,850 mm Weight: 20,000 kg Standard equipment: - 3 axes (Y1, Y2, X) - CNC control DT-15 - 15" 2D graphic display - Intuitive touchscreen operation (simple drawing of bending contour with finger) - User-friendly dialog programming - Automatic bend sequence calculation - Automatic calculation of flat length for sheet metal blank - Graphic product and tool memory - Correction function - USB connections for backup and program transfer - PC software for program creation on PC and transfer to machine via USB - Servo-driven backgauge on linear guides and ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35 and 50 mm) - Fiessler AKAS laser safety device mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE standards - Oil filling - Operating manual in GERMAN or ENGLISH Advantages of the AD-S series: - Increased stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double instead of single linear guides - More options available, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem configuration, alternative CNC controls, etc. Options: - R axis - R/Z1/Z2 axes - DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) - CNC control SKY22 - CNC control Delem DA66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability