Lamel nakup rabljenega (360)

Stanje: novo, Leto izdelave: 2025, nosilnost: 4.000 kg, dvižna višina: 17.550 mm, skupna dolžina: 7.350 mm, Max. lifting capacity: 4,000 kg Max. lifting height: 17.55 m Max. outreach: 13.08 m Breakout force with bucket: 7,766 daN Upward tilt angle: 16° Downward tilt angle: 110° Turning radius (over tyres): 3.94 m Lifting time: 16 s Lowering time: 12 s Telescopic boom extension: 16 s Telescopic boom retraction: 13 s Tilting in: 4 s Tilting out: 4 s Engine emission standard: Stage V Number of cylinders / Cylinder capacity: 4 – 3,621 cm³ Rated power IC engine – Power: 100 Hp / 75 kW Max. torque / Engine speed: 410 Nm @ 1,600 rpm Tractive force: 7,850 daN Transmission type: Torque converter Number of gears (forward / reverse): 4 / 4 Travel speed (laden): 25 km/h Max. travel speed: 24.90 km/h Max. travel speed (may vary according to applicable regulations): 24.90 km/h Parking brake: Automatic parking brake Service brake: Oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: Gear pump Hydraulic flow / Hydraulic pressure: 167 l/min – 270 bar Engine oil capacity: 10 l Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Sound level in cab (LpA): 79 dB External noise (LwA): 106 dB Hand/arm vibration exposure: < 2.50 m/s² Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Cjdpexpi Srsfx Afqork Cab certification: ROPS / FOPS Level 2 cab Controls: JSM

Stanje: rabljeno, Leto izdelave: 2002, x-axis travel 3200 mm y-axis travel 800 mm z-axis travel 600 mm Spindle taper SK40 Spindle speed 50 – 12,000 rpm Number of tool positions in magazine 30 pcs Table clamping surface 3900 x 750 mm Rapid traverse rates x/y/z 12/12/12 m/min Total power requirement 29 kW Machine weight approx. 15,000 kg Space requirements approx. 7200 x 3500 x 3100 mm CNC travelling column machining center Hedelius Equipment: - Chip conveyor - 30-position automatic tool changer - Heidenhain CNC control iTNC 530i - High-pressure band filter system - Through-spindle coolant (IKZ) 15 bar - SK40 tool holders - Operating manual The following repairs were carried out in 07/2022: - Linear guides on X-axis - Various pneumatic hoses - Safety glass on loading doors - Several illuminated pushbuttons - Safety actuators for doors - X-axis cover (lamella type) - Through-spindle coolant filters (4 pcs) - Filter cabinet - Timing belts for Z and Y axes - Door wipers with damper Crodpev S Irtefx Afqsk - Hoses for external cooling, spindle cooling and spray guns (2 guns) - Set of nozzles for external cooling - 2x "Falkenbalg" for Y-axis - 1 set of door rollers with rail (6 meters) - 1x Klüber grease with taper extractor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Used 5-axis CNC machining center including edge banding Manufacturer: HOMAG Model: PROFI BMG310/42/F/V/K Year of construction: 2018 Crsdpfxew H Nzds Afqok Main spindle completely overhauled by Benz Working area X: 4200 mm (4375 mm with tool diameter 25 mm) Working area Y: 1350 mm for all units - Milling, tool diameter 25 mm: 1600 mm - PowerEdge: 1600 mm Workpiece thickness: 300 mm Equipment: - Speed Pack - 32-position rotary tool changer (24+8) - 10-position rotary tool changer - 8-position linear tool changer - Processing spindle 12 kW Drive5C - Spindle vibration visualization system - Drilling unit with 31 spindles: V21/H10/S0/90° - 6 kW additional milling spindle for drilling unit - Workpiece edge air nozzle 60 mm - POWEREDGE gluing unit - Pre-trimming station and double roller BMG310/V - Additional roller tray for pre-trimming station KH 65 mm - Pneumatic lift function for drive spindle - Saw/trimming unit for tool changer - Combination flush milling/pull scraper unit - LED position display system - PowerClamp clamp interface K-table - Dynamic nesting assignment - Vacuum system 290/345 m³/h - PowerControl PC87 Powertouch - Collision control - Tool wear path measurement - WoodWop component Lamello Clamex-P - Chip conveyor - SafeScan for Speed Pack BMG and much more Complete technical data available in the .pdf document.

Stanje: rabljeno, Avtomatska lakirna linija za lesene stole, že demontirana in naprodaj v posameznih delih: - 3 lamelni trakovi širine 2,5 metra - 3 lamelni trakovi širine 4 metre - 2 lakirni verižni liniji sestavljeni iz tirnic, verige, pogonskega motorja in obešal - lakirne kabine - brusilne mize - zunanji ciklon za odsesavanje - razno Crjdpfx Aexlb E Asfqek

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, nosilnost: 25.000 kg, Oprema: CE označba, Kovinski lamelni podajalnik ali ATM, tip Skid, okrepljen sprejemni zalogovnik zmogljivosti 15 m3, širina lamel 1200 mm, razdalja med osmi 3800 mm, debelina lamel 30 mm, pogon z Bauer reduktorskim motorjem, 7,5 kW, pogonsko in zobato kolo, elektro omarica za vklop/izklop, gumijasti tračni transporter pod ATM za zbiranje drobtin na povratnem delu, širina traku 650 mm, razdalja med osmi 4500 mm, povezovalni lijak. Crsdpfx Aoxv Akhefqjk

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, višina brušenja: 200 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.620 mm, širina brusilnega traku: 1.400 mm, Heesemann Multi-Purpose Wide-Belt Sander, Type HSM .4 NEW Edition RQHD ROLLER/CROSS/LONGITUDINAL DLB/DB-S Sanding width: 1,350 mm Frame structure with transport bed With continuous conveyor belt, feed speed 3 - 15 m/min, frequency controlled, motorized adjustable workpiece thickness (3 - 200 mm). Automatic workpiece thickness measurement at machine infeed Workpiece vacuum clamping system with adjustable vacuum For transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each at machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touchscreen design, display for production and downtime. Ethernet connection possible. Program memory for 100 programs Remote maintenance program Program for dust extraction gate control External pneumatic valves for customer-supplied extraction gates/sliders can be controlled via pre-installed volt-free relay contacts, supporting any external operating voltage (e.g. 115V AC / 230V AC / 24V DC). MMI package including: - Intuitive machine operation with self-explanatory symbols - LED strips at infeed and outfeed as operator assistance for the workpiece (workpiece positioning at infeed for optimal use of the sanding belt, outfeed shows workpiece position) - Belt manager status display at the unit (screen) - Unit information with grit specification (screen) - Visualization of workpiece position as it passes through the machine - Video camera at the machine outfeed 1 Contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speed: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 Cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW frequency converter 1 Longitudinal sanding unit with pressure lamella band system Sanding belt dimensions: 2,620 x 1,400 mm Belt speed: 1.8 – 9 m/s (with pressure lamella band) 1.8 – 18 m/s (without pressure lamella band) Drive power: 15 kW frequency converter Stepless adjustment of sanding belt speeds, wear-free brake system, automatic compensation for possible differences in belt edge lengths, counter-rotating sanding belt, oscillating sanding belt cleaning, adjustable. 2 Pressure beams with computer-controlled selective pressure regulation system CSD® (10 years warranty) The electromagnetic CSD® system is also maintenance-free, as there is no contamination as with pneumatic elements. 1 Rotating disc brush unit DB-S 10 driven disc brushes, operating in 2 rotational directions, central height adjustment for abrasive wear, including quick-change device for disc brushes Brush type: Flex-Trim Diameter: 150 mm Crodpfx Aju Ic Rgjfqsk Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply For belt run monitoring in the event of temporary power supply interruption Energy Management System EMS Belt support side: left Terminal: front left Workpiece cleaning device LED lighting inside the machine (on belt support side) Further information available on request.

Stanje: novo, Leto izdelave: 2025, nosilnost: 4.000 kg, dvižna višina: 17.550 mm, skupna dolžina: 7.350 mm, Max. lifting capacity: 4,000 kg Max. lifting height: 17.55 m Max. outreach: 13.08 m Breakout force with bucket: 7,766 daN Upward tilt angle: 16° Downward tilt angle: 110° Turning radius (over tyres): 3.94 m Lifting time: 16 s Lowering time: 12 s Telescopic boom extension: 16 s Telescopic boom retraction: 13 s Tilting in: 4 s Tilting out: 4 s Engine emission standard: Stage V Number of cylinders / Cylinder capacity: 4 – 3,621 cm³ Rated power IC engine – Power: 100 Hp / 75 kW Max. torque / Engine speed: 410 Nm @ 1,600 rpm Tractive force: 7,850 daN Transmission type: Torque converter Number of gears (forward / reverse): 4 / 4 Travel speed (laden): 25 km/h Max. travel speed: 24.90 km/h Max. travel speed (may vary according to applicable regulations): 24.90 km/h Parking brake: Automatic parking brake Service brake: Oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: Gear pump Hydraulic flow / Hydraulic pressure: 167 l/min – 270 bar Engine oil capacity: 10 l Hydraulic oil capacity: 135 l Cedpfxexpi R Ue Afqjrk Fuel tank capacity: 140 l Sound level in cab (LpA): 79 dB External noise (LwA): 106 dB Hand/arm vibration exposure: < 2.50 m/s² Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Cab certification: ROPS / FOPS Level 2 cab Controls: JSM

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Lamelnalis 13 m x 1,6 m x 240 z 2 nadstropji Crodpfx Afoxmvvlsqok

Leto izdelave: 2016, Stanje: delavnici obnovljeno (rabljeno), Unit with 2 hydraulic pressing shoes from above for pressing glued timber lamellae in the mechanical press without any offset. Cjdpfx Afjd Dcmqsqsrk (Instead of using a large hammer or heavy weights on the crane hook.) Drive: SEW geared motor and friction wheel, 1.1 kW Hydraulic unit: 5.5 kW Oil tank capacity: 160 liters Pressure: 40 / 250 bar The machine was completely overhauled in 2012 and equipped with a new control cabinet and new electrical installation. As the customer did not pay the installments, we repossessed the machine about 1.5 years later. The machine was used intermittently for a maximum of 1 year.

Stanje: novo, • Maximum profile width (mm): 90 • Maximum profile height (mm): 80 • Saw blade diameter (mm): 350 • Saw blade bore (mm): 30 • Motors: 2 x 1.5 kW • Extraction connections: 2 x Ø 80 mm • Pressure (bar): 6 – 7 • Weight (kg): 300 • Cutting of strips: for wood, plastic, and aluminium frames • Saw blades: 2 fixed at 45° • Pneumatic aggregate stroke: with two-hand operation • Adjustable stroke speed • Pneumatic lamella clamping devices: integrated into the machine cycle • Automatic lamella adjustment: to profile shape • Support tables (mm): 700 mm long, left and right • Pneumatic length stop • Motor protection switch • Motor brakes • Tool kit Crjdpfx Afofiqhbjqjk • Maintenance unit • Pressure switch Machine features • Simple operation • Fast working cycle • Low maintenance and cleaning effort

Stanje: zelo dobro (rabljeno), Image 1 is the manufacturer’s sample image. The remaining images are originals. Manufacturer: Minda Model: Timper Press V 200 Technical Data: Main pressing force from below: Number of pressing chambers: 2 Maximum lamella width: 270 mm Maximum glulam length: up to 18 m Glulam profile: straight Side alignment of lamellae: included Press system: hydraulic Permanent pressure control: included Cedpfxshtd E Ae Afqsrk Bundling: separate Loading / unloading: in longitudinal direction

Stanje: nepreverjeno (rabljeno), Za oblikovanje koncev lamel pri izdelavi krilnih polken Credpfxsxuf Rbj Afqsk

Stanje: novo, Leto izdelave: 2023, nosilnost: 4.000 kg, dvižna višina: 13.530 mm, skupna dolžina: 7.360 mm, - Max. lifting capacity: 4,000 kg - Height: 13.53 m - Maximum lateral reach: 9.46 m - Bucket breakout force: 7,400 daN - Overall cab width: 0.89 m - Tipping angle: 12° - Dumping angle: 114° - Turning radius (over wheels): 3.94 m - Own weight (with forks): 10,855 kg - Weight: 10,900 kg - Tyres: Pneumatic - Tyre model: Alliance 400/80 - 24 - 162A8 - Fork dimensions (length/width/cross-section): 1200 mm x 125 mm x 50 mm - Lifting time: 16 s - Lowering time: 12.40 s - Telescope extend: 17.30 s Crsdpfx Afsxndppoqek - Telescope retract: 13 s - Tilting: 4 s - Dumping: 4 s - Manufacturer: Deutz - Engine emission standard: Stage V / Tier 4 final - Engine model: TD 3.6 L - Number of cylinders / Total cylinder capacity: 4 - 3621 cm³ - Rated engine power - output: 75 hp / 55.40 kW - Max. torque / engine speed: 340 Nm @ 1,600 rpm - Tractive force: 8,320 daN - Transmission type: Torque converter - Number of gears (forward/reverse): 4 / 4 - Max. travel speed: 24.90 km/h - Parking brake: Automatic parking brake - Service brake: Oil-immersed multi-disc brakes on front and rear axles - Pump type: Gear pump - Hydraulic flow/pressure: 106 l/min - 270 bar - Engine oil: 7.50 l - Hydraulic oil: 135 l - Fuel tank capacity: 140 l - Cabin noise level (LpA): 79 dB - Environmental noise (LwA): 102 dB - Hand/arm vibration load: < 2.50 m/s² - Steering wheels (front/rear): 2 / 2 - Drive wheels (front/rear): 2 / 2 - Safety / cab approval: EN 15000 standard / ROPS-FOPS level 2 cab - Controls: JSM

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, TECHNISCHE DATEN: Pressenmodell: T105-TR Seriennummer: 099603 Baujahr: 1996 Nennkraft: 1050 kN Gewicht: 6.400 kg Nennhubzahl: 60/min Betriebsluftdruck: 4,3–5,5 bar Installierte Leistung: 7,5 kW Hub min./max.: 15/140 mm Ausladung: 310 mm Crsdpfx Afexz A Hmsqsk Tisch-Stößel-Abstand min./max.: 340/480 mm Stößelbohrung: 50 mm Stößelverstellung: 100 mm Luftverbrauch: 1,1 L Stillsetzung: O.T. Spannung: 380 V Frequenz: 50 Hz Hilfsspannung: 24 V Hydraulische Überlastsicherung Komplett mit Bedienungsanleitung und CE-Konformitätserklärung 6 Monate Garantie auf mechanische Teile und 12 Monate auf den Schaltschrank. NEUE KOMPONENTEN INSTALLIERT: • Sicherheits-Schlüssel für seitliche Schutzeinrichtungen • Frontaler Schutz mit Sicherheitsschlüsseln • Kupplungslamellen • Schaltschrank • Arbeitstisch nachgearbeitet (CNC) • Luftregler • Manometer für Luft • Sicherheits-Elektroventil

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, I am selling a complete glulam (laminated timber) press line. Manufacturer: KALLESOE MACHINERY AS Model: LHF6114 + KL30 + STACKER Maximum infeed length: 1800 mm Final product width: 525 mm (ideally 480–520 mm) Minimum and maximum lamella cross-section: max. 35 mm x 80 mm and min. 16 mm x 100 mm Adhesive: Danafix 446 Maximum outfeed length: 1800 mm – 6000 mm Crjdpjw Anc Esfx Afqsk Available immediately. Inspection possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, VERY WELL-MAINTAINED MULTIPURPOSE WIDE-BELT SANDING MACHINE WITH CROSS AND LONGITUDINAL BELT; SUITABLE FOR WOOD CALIBRATION SANDING, WOOD SURFACE SANDING, AND INTERMEDIATE LACQUER SANDING. Maximum working width: 1,300 mm Conveyor belt with vacuum device Conveyor discharge unit with pressure regulator Feed motor: 1.5 kW Feed rate: 3 - 15 m/min CSD – Computer-controlled selective pressure regulation technology with 2 mm tolerance compensation Distance between control rollers: 16 mm Pressure shoe pitch: 48 mm Switch spacing: 82 mm Unit equipment: 1) Cross sanding unit Belt dimensions with lamella intermediate belt Abrasive belt size: 15 x 4,800 mm Abrasive belt speed continuously adjustable, Csdpfx Afsxrdk Ujqork therefore suitable for both surface and lacquer sanding 2) Longitudinal sanding unit with combined sanding roller and sanding shoe thus suitable for both calibration sanding and wood & veneer surface sanding Abrasive belt speed continuously adjustable, making it also suitable for lacquer sanding Abrasive belt dimensions: 1,350 x 2,620 mm Control system: Machine operation control on right-hand side of the machine Up to 20 programs storable Transport dimensions: 2.4 x 2.2 x 2.35 m Weight: approx. 5.4 t Large selection of sanding belts included in delivery

Stanje: dober (rabljeno), traveling cross-cut saw For cross-cutting glulam lamellas Machine length: 2200 mm Machine width: 1200 mm Working height: 850 mm without control system Crodpfxog E Iqfs Afqsk

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A891200061 / 1187190023 / A971400020, volumenski pretok: 40 m³/h, trajanje garancije: 12 meseci, - LEYBOLD Trivac D40 B - Cena: od 2.400 € - LEYBOLD D40 BCS - Cena: 2.100 € - LEYBOLD D40 BCS-PFPE - Cena: 3.114 €, brez PFPE olja Lamele vakuumske črpalke Sesalna zmogljivost: 40 m³/h, Končni tlak: Brez plinskega balasta < 5 x 10‐3, S plinskim balastom < 8 x 10‐3, Omrežna priključitev / poraba: 380V/4A, Vhodna prirobnica: KF40, Stanje: dobro, Popolnoma obnovljena in prebarvana, Obratovalni medij: LVO100 / PFPE, 1 leto garancije Crodpjt A Dzhofx Afqsk

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators Codpfx Aoxmlbksfqsrk - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: dober (rabljeno), Leto izdelave: 2010, Matec 30 L, Leto izdelave 2010, Krmilnik Heidenhain iTNC 530, Pomiki X/Y/Z 1300/600/700 mm, Vrtljaji vretena do 12.000 min⁻¹, Vpenjanje HSK 63 - A, električno ročno kolo, IKZ 20 bar, pasovni papirni filter, menjalnik orodij za 80 orodij, popolnoma zaprta delovna komora, taktilni merilni sistemi, transporter za odrezke, harmonika z jeklenimi lamelami, Crjdpfxsxu U Ups Afqek 3D merilna sonda, laserska merilna naprava,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, I am selling a complete line for laminated timber gluing. Manufacturer: KALLESOE MACHINERY AS Model: LHF6114 + KL30 Maximum infeed length: 1800 mm Final product width: 525 mm (optimal: 480–520 mm) Minimum and maximum lamella cross-section: max. 35 mm x 80 mm and 16 mm x 100 mm Crodpfx Aevw Eh Njfqsk Adhesive: Danafix 446 Maximum outfeed length: 1800 mm – 6000 mm Available immediately. Inspection possible.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, 1600 kVA oljni/hermetični transformator, Pauwels, letnik 2001, 21kV/0,69, vezalna skupina Dyn5, VN plug-through izolatorji, NN porcelanasti izolatorji, Opcijsko: kazalni termometer, popolna hermetična zaščita, kolesa, priključne lamele. Crodpfxsxwa S Es Afqsk

Stanje: dober (rabljeno), Lamelirni stroj Andritz K 1220 Credpfx Asxw Eppjfqek

Stanje: novo, Leto izdelave: 2025, nosilnost: 6.000 kg, dvižna višina: 25.900 mm, skupna dolžina: 9.280 mm, Max. lifting capacity 6,000 kg - Height: 25.90 m - Maximum outreach: 21.70 m - Tilting angle a4: 12° - Dump angle a5: 110° - Upper carriage rotation: 360° - Tyre model: 445/65 R22.5 - Drive wheels (front / rear): 2 / 2 - Steering type: 2-wheel steering, 4-wheel steering, crab mode - Support type: dual telescopic - Outrigger control: individual or simultaneous commands - Engine manufacturer: Yanmar - Emission standard: Stage V / Tier 4 - Engine model: 4TN107FHT-6SMU1 - Rated power combustion engine / output: 156 Hp / 115 kW - Max. torque / engine speed: 602 Nm @ 1,500 rpm - Number of cylinders / displacement: 4 / 4,567 cm³ - Engine cooling system: water cooling - number of batteries / battery voltage / capacity: 2 x 12V / 120 Ah - Battery starting current (EN): 850 A - Transmission type: hydrostatic with Speedshift - Transmission / number of gears (forward) / (reverse): Speedshift 2 / 2 - Max. travel speed: 40 km/h - Tractive force: 8,600 daN - Parking brake: automatic negative parking brake - Service brake: oil-immersed disc brakes front and rear axles - Gradeability - loaded / unloaded: 40.40% / 45.50% Crjdpfxjxmla Hj Afqek - Pump type: variable displacement pump - Hydraulic flow rate: 185 l/min - Hydraulic pressure: 350 bar - Engine oil: 13 l - Hydraulic oil: 260 l - Fuel tank capacity: 270 l - Diesel exhaust aftertreatment (AdBlue®): 24 l - Cabin noise level (LpA): 68 dB - External noise level (LwA): 108 dB

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, skupna dolžina: 5.130 mm, Maximum lateral reach: 3.40 m ・Breakout force with bucket: 3427 daN ・Dump angle: 12° ・Rollback angle: 117° ・Turning radius (over wheels): 3.31 m Cjdpfsxluzwjx Afqork ・Operating weight (with forks): 4800 kg ・Tyres: Pneumatic ・Lifting time: 8 s ・Lowering time: 5.40 s ・Extending telescopic boom: 5.60 s ・Retracting telescopic boom: 4.30 s ・Tilting forward: 3.50 s ・Tilting back: 3.60 s ・Number of cylinders / Cylinder displacement: 4 - 3331 cm³ ・Rated power of internal combustion engine - Output (kW): 75 Hp / 55.40 kW ・Max. torque / Engine speed: 265 Nm @ 1400 rpm ・Traction force: 3550 daN ・Number of gears (forward / reverse): 2 / 2 ・Max. travel speed: 24.90 km/h ・Parking brake: Automatic negative parking brake ・Service brake: Oil-immersed disc brakes on front axles ・Pump type: Gear pump ・Hydraulic pressure: 235 bar ・Engine oil: 11.20 l ・Hydraulic oil: 115 l ・Fuel tank capacity: 63 l ・Noise level in cab (LpA): 76 dB ・Ambient noise (LwA): 104 dB ・Hand/arm vibration exposure: < 2.50 m/s² ・Steering wheels (front/rear): 2 / 2 ・Driven wheels (front/rear): 2 / 2 ・Safety / Cabin approval: Standard EN 15000 / Cabin ROPS - FOPS Level 1 ・Controls: JSM