ELEKTRIČNI VILIČAR

Still RX 60-35 L

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 3.500 kg, dvižna višina: 6.700 mm, skupna dolžina: 4.850 mm, - Operation: Seated Operator - Load Capacity: 3,500 kg - Load Center Distance: 500 mm - Load Distance: 468 mm - Axle Load with Load (front/rear) kg: 8,042 / 958 - Axle Load without Load (front/rear) kg: 2,662 / 2,838 - Track Width (front/rear) mm: 1,002 / 900 - Mast/Fork Carriage Tilt (forward/backward) °: 7 / 7 - Aisle Width with 1,000 x 1,200 mm Pallet (across) mm: 3,941 - Aisle Width with 800 x 1,200 mm Pallet (lengthwise) mm: 4,141 - Turning Radius: 2,273 mm - Minimum Pivot Turning Distance: 649 mm - Travel Speed (Blue-Q/Standard/Sprint) with Load km/h: 18 / 18 / 20 - Travel Speed (Blue-Q/Standard/Sprint) without Load km/h: 18 / 18 / 21 - Lift Speed (Plus* / Standard Performance) with Load m/s: 0.53 / 0.44 - Lift Speed (Plus* / Standard Performance) without Load m/s: 0.57 / 0.51 - Lowering Speed with Load m/s: 0.50 - Lowering Speed without Load m/s: 0.43 - Tractive Force (Plus* / Standard Performance) with Load N: 10,300 / 7,590 - Tractive Force (Plus* / Standard Performance) without Load N: 10,650 / 8,015 - Max. Tractive Force (Plus* / Standard Performance) with Load N: 20,900 / 16,920 - Max. Tractive Force (Plus* / Standard Performance) without Load N: 20,290 / 17,170 - Gradeability (Plus* / Standard Performance) with Load %: 17.8 / 12.9 - Gradeability (Plus* / Standard Performance) without Load %: 28.2 / 21.9 - Max. Gradeability (Plus* / Standard Performance) with Load %: 24.2 / 20.6 - Max. Gradeability (Plus* / Standard Performance) without Load %: 24.82 / 28.2 - Acceleration Time 15 m (Plus* / Standard Performance) with Load s: 5.7 / 6.3 - Acceleration Time 15 m (Plus* / Standard Performance) without Load s: 5.0 / 5.4 Ledpoxd E Dtofx Abkohl - Service Brake: Hydraulically operated wet disc brake - Handling Capacity (Plus* / Standard Performance) t/h: 258 / 245 - Energy Consumption at Handling Capacity (Plus* / Standard Performance) kWh/h: 8.6 / 8.0 - Working Pressure for Attachments bar: 250 - Oil Flow for Attachments l/min: 55 - Sound Pressure Level LpAZ (Operator's Seat) dB(A): 70 - Human Vibration: Acceleration according to EN 13059 m/s²: 0.57 - Trailer Coupling, Design/Type: DIN Pin - Integrated storage compartments and cup holders - Display and control unit with screen, function keys, and menu navigation (splash-proof) - MSG 65 Grammer seat with synthetic leather cover - Grab handle on overhead guard, front and rear - Multi-lever control - 3 fixed and 2 freely configurable drive programs, Blue-Q economy mode, sprint mode for maximum handling performance at the press of a button - Display of energy consumption and remaining travel time based on current battery charge status - Lithium-ion battery 1:1 exchangeable - Automatic parking brake - Curve Speed Control - Intelligent seatbelt monitoring with logic check

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working envelope of Ø 3900 mm. Equipped with the advanced QC 2 control system, it includes a handheld programming device and supports the new tandem welding processes for both pushing and pulling techniques. This unit is ideal for high-quality welding applications, offering comprehensive welding and sensor technology solutions. Contact us for more information regarding this machine. Machine Advantages Technical Advantages • Working range: Ø 3900 mm • Handheld programming device with touchscreen • Qirox technology interface • CTMS tool management • TCP measuring device Additional Information Welding Technology - Power source - Arc sensor - Water cooling module - Control module - Wire feed unit - Robotic welding torch Software - Parameter loops - Parameter set transitions based on distance - Multi-layer technique - Programmable weaving patterns - Software language: German IRPS Scanner - IPC control - Rittal control cabinet Lhsdjyaimlepfx Abkol - Touchscreen - Scanner interface - Uninterruptible power supply - Scan width: 1000 mm at 500 mm product height - Scan speed: 300 to 1000 mm/sec Torch Cleaning Unit - Torch cleaning device - Pneumatic booster - Wire cutter Control Unit - Digital inputs/outputs: 16 - Serial interface - Computer connection: QIROX control - CAN bus - USB interfaces: 2 - Flash memory: 8 GB - Buffer module: 24V - Point editor - Expandable up to 16 axes

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 6.486 h, nosilnost: 3.500 kg, dvižna višina: 6.600 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.930 mm, Proizvajalec + model: STILL RX 60 - 35 L Dvižni drog: 3F6600 ID: 26041.67378 Kategorija: Rabljeno Dvižni drog: 3F6600 Vilične vilice: 1150 mm Spuščena višina: 2930 mm Višina dviga: 6600 mm Nosilnost: 3500 kg Leto: 2020 Delovne ure: 6486 ur Kapaciteta: 80v / 775ah Oprema: Popolna cestna razsvetljava Nove NON-marking pnevmatike! E-L-M * Razširitve vilic in bočni pomik Lhedpjzuugrsfx Abksl Zračno vzmeten sedež! Bleu spot (modra varnostna luč) Prvi originalni LAK! Popolnoma KOT NOVO!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Extrudeuse de laboratoire/d’essai AM-20 avec tête plate / filière à film et unité de calandrage Extrudeuse compacte et verticale de laboratoire ou de recherche AM-20 pour le traitement de divers plastiques comme PP, PE, PS, ABS, PVC et autres granulés plastiques. Ljdpfsyyw T Usx Abkshl La machine est équipée d’une tête plate (filière à film) et convient particulièrement à l’extrusion de films, aux essais matériaux, aux essais de couleur et de mélange ainsi qu’aux applications de développement en laboratoire ou atelier technique. L’équipement de calandrage est également compris, comme visible sur les photos. Données techniques : • Modèle : AM-20 • Tension : 110 V / 220 V • Tension d’alimentation : 2 x 220 V • Puissance : 1000 W • Diamètre de vis : 20 mm • Rapport L/D : 15:1 • Débit : env. 500–1000 g/h • Dimensions : 45 x 25 x 60 cm Convient pour : • Extrusion de films • Essais de laboratoire et de développement • Développement de matériaux • Essais de couleur et de mélange

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Ljdpfxst N Antj Abkohl Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Max Ø 114mm; Straight and curved round tubes; One grinding station; Grinding of straight and curved round tubes up to Ø114mm with maximum flexibility. Ledpstzkgbsfx Abkohl The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system allows for belt grinding without rotating the tube, delivering optimal results. The feeding system safely advances straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3-22 Feed speed (m/s): 1-5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment Lhodpfevxlq Hjx Abkjl used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Aluminium flat belt conveyor including 4 suspension points Dimensions: 6000 + 520 x 105mm Lhjdod Ra Ttspfx Abkel Belt width: 400mm PVC conveyor belt including cleats and wave edge * Optionally available with a magnetic tail pulley at the end of the conveyor belt. * Optionally available with subframe. * Custom-made versions in all configurations possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 34.000 h, Funkcionalnost: popolnoma funkcionalen, Priložnost! Kot nova Salvagnini S4 / P4 iz prve roke, letnik 2018! Stroj je v brezhibnem, skoraj novem stanju in je takoj pripravljen za uporabo! Sistem je redno servisiran pri Salvagniniju, vzdrževanje je v okviru servisne pogodbe. Tehnični podatki in Salvagnini interna številka: Prebijalni stroj/škarje z rotacijsko postajo S4Xe.30 obsega: Transportni trak TAC30.L2000 Kotna obračalna enota DA30 Prebijalni stroj S4Xe.30 Prebijalna glava H3 Hidravlična pogonska enota HU22E Krmiljenje in upravljanje sistema SiX Pravokotne škarje CS5S Obračalna naprava DF Spodnji cilinder EI09 Enota za vtiskovanje BU30 Dvojni rotacijski prebijalec P2R3132 Dvojni rotacijski prebijalec P2R3334 Enota za navojno valjanje ME35 Naprava za samodejno nanašanje samolepilnih etiket LBC (tiskalnik etiket) Portalni robot MC30 Transportni transporter s krtačami CTS30 Škarjast dvižni mizni transporter TCV3015 Vodno-zračni hladilni agregat R81E Orodja (podroben seznam na zahtevo) P4Xe-3125 Upogibni center z rolno in obračalno postajo obsega: Škarjasto dvižno mizo TCV3015.CT.RPC Naprava za dovajanje in razlaganje PCD3015 Obračalna naprava RIP3015 Upogibni center P4Xe-3125 Zgornji upogibni nosilec LS Spodnji upogibni nosilec LI Programabilni pritiskač U1 Standardna vpenjalna noga NS Krmiljenje in upravljanje sistema SiX Delovno območje s kroglicami SFE Naprava za čiščenje in mazanje upogibnih nosilcev PSE Asimetrično upravljanje za pomožna upogibna orodja za pozitivne gube CLA-A Komplet CLA orodij s "labodjim vratom" UCE1500G38 Asimetrično upravljanje za pomožna upogibna orodja za negativne gube CLA-N-A Komplet CLA orodij s "labodjim vratom" za negativne gube UCE1500NG38 Naprava za V-zarezo RSU.UR-4 Vrtljiva enota za pomožna orodja T Opcija za rezanje in avtomatski izmet profilov CUT.SPC31 T-orodje za 90° upogibe UTZ2 Izmetni/puferski sistem za panele SAP34.POS Sistem vsebuje tečajni trak za centralno odstranjevanje ostankov pločevine. Lhjdpfszh I Iijx Abkol Ti se nato s transporterjem z labodjim vratom prevažajo v nagibne zabojnike. Razvrščanje na nerjaveče jeklo (VA), aluminij in črno pločevino je popolnoma avtomatizirano. Vgrajena je tudi tehtalna enota s prikazom napolnjenosti, ki signalizira stanje preko krmilnika. Ogled in testiranje stroja sta mogoča po dogovoru. Dodatne videoposnetke in podrobne slike sistema z veseljem posredujemo na zahtevo!

Stanje: zelo dobro (rabljeno), A-4200-Tebel Ostekar Lodpoh A Hb Ujfx Abkohl Ostekar med en kapacitet på 10.000 L, Alfa Laval - Tebel, i god stand, 1 stk., lukket model med omrører, dobbelt kappe, isoleret. Opvarmningskappe på nederste halvdel af den cylindriske sektion • Cylinderlængde: 1.750 mm • Cylinderdiameter: 2.860 mm • Indvendig belysning • Inspektionslem med skydedør i toppen • CIP-tilslutning • Udgang: 4" Udløbshøjde: 400 mm Minimumsniveau Vægt: 2.800 kg (Mål: L x B x H): 3.350 x 3.000 x 3.200 mm