Kx 019 4 nakup rabljenega (60.278)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, skupna masa: 220 kg, zunanji premer vpenjalne glave: 600 mm, Pribor za odrezovanje kovin TDG Spain - 4-600 MACH-ID 9627 Proizvajalec: TDG Spain Tip: 4-600 Letnik: 2013 Premer: 600 mm 4-čeljustna glava: da Maks. hitrost: 970 obr/min Dolžina: 1200 mm Fodpfx Ahsy T Ik Romogc Širina: 800 mm Višina: 400 mm Teža: 220 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: UFS/200DTFVRE480 / UFS 1078, Leto izdelave: 1999, obratovalne ure: 1.900 h, nosilnost: 2.000 kg, dvižna višina: 4.800 mm, vrsta goriva: električni, teža baterije: 1.000 kg, Oprema: vilice za palete, Na prodaj zaradi prenehanja delovanja podjetja. Električni viličar je v dobrem stanju, uporabljan izključno v notranjosti na gladkih betonskih tleh. Pnevmatske gume so v dobrem stanju. Splošno stanje je sprejemljivo. Skupna teža (brez baterije) 3,25 t, baterija ima približno 1,0 t. Polnilnik je priložen. Fodpfoza A Ehex Ahmsgc Brez prevoza.

Leto izdelave: 1995, stanje: dober (rabljeno), multifunctional punching machine, punch, hole-punch, pneumatic hole punch Fedpfjb A Nc Hsx Ahmegc - operation: pneumatic - year of manufacture: 1995

Stanje: novo, Hardfacing electrode Brand: Duramit W4 Material: 1.2567 Diameter: 6 mm Length: 450 mm 40 pieces per package Fsdpfehhyitjx Ahmegc 6 packages available €95 per package

Stanje: novo, Hardfacing electrode Brand: Duramit W4 Material grade: 1.2567 Fgedpfx Ahohhyizomsc Diameter: 3.25 mm Length: 350 mm 120 pieces per package 2 packages available 95 euros per package

Stanje: zelo dobro (rabljeno), Profesionalni knjižarski vrtalnik priznane nemške družbe Constantin Hang Maschinenfabrik Göppingen. Model 114-4 je opremljen s 4 vrtalnimi glavami, namenjenimi za natančno vrtanje papirja, dokumentacije, katalogov, koledarjev in drugih tiskarskih materialov. Stroj se uporablja v: • tiskarnah, • knjigoveznicah, • grafičnih delavnicah, • proizvodnji registratorjev in katalogov, • pripravi tehnične dokumentacije. Trdna nemška konstrukcija zagotavlja visoko natančnost delovanja in dolgo življenjsko dobo. Tehnični podatki: • Proizvajalec: Constantin Hang Maschinenfabrik • Model: 114-4 • Število glav: 4 • Nastavljiv razmak glav • Nastavljiva delovna miza • Noga za upravljanje – pedal • Zaščitni pokrov Fjdpfey Nm A Rex Ahmogc • Proizvedeno v Nemčiji

Stanje: skoraj kot novo (rabljeno), prva registracija: 12/2019, vrsta goriva: plin, gorivo: dizel, emisijski razred: Euro 6, IVECO STRALIS 460NP HYWAY 12/2019 METAN LNG, 380.000 km, samodejni menjalnik, retarder, inteligentna tretja os, izmenljivi keson 7,40x2,55xV 2,45 (notranji), z cerado in drsnim pokrovom, dvojni priklop za prikolico in bigo, možnost leasinga. Benito 3383844139 Michele 3394588233 Fgjdpfxoxdiglj Ahmoc

Stanje: rabljeno, barva: drugo, Leto izdelave: 2020, obratovalne ure: 71 h, Moč motorja z notranjim izgorevanjem: 62 KM (46 kW) Skupna dovoljena masa vozila (GVW): 8.425 kg Proizvajalec motorja: Kubota Fsdpfx Ahezbcufsmjgc CE oznaka: da Serijska številka: KBCDZ84BJL3A70888 Stroji na prodaj Prebrskajte našo spletno stran za različne stroje, ki so na voljo za nakup. Imamo več možnosti, kot jih najdete na spletu – pokličite ali nam pišite kadarkoli. Vsi naši stroji so v celoti servisirani in preverjeni za zanesljivost. Potrebujete slike? Kontaktirajte nas in jih bomo hitro poslali. Na voljo smo vam v nizozemščini, angleščini, francoščini, nemščini, španščini in ruščini. Odkrijte našo široko ponudbo zanesljivih strojev.

Stanje: zelo dobro (rabljeno), vrsta goriva: dizel, barva: drugo, prva registracija: 10/2017, Leto izdelave: 2017, obratovalne ure: 6.350 h, Kabina: Dnevna Pogon: Gosenice Hitromenjalni sistem: Da Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Fodpfxezad Tgo Ahmegc Cena: Na zahtevo

Stanje: zelo dobro (rabljeno), Beading Machine / Sheet Metal Edge Forming Machine by renowned German manufacturer Weberwerke Siegen. The machine is designed for edging, hemming, and beading (creating ribs) on sheet metal edges. Its robust and heavy cast iron construction ensures stable and precise operation. The open C-frame allows for processing large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for forming sheet metal. The pressure and roller guidance are mechanically adjustable. Fodoyga T Njpfx Ahmogc Nameplate data: • Model: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² This machine is not a shear – it does not cut sheet metal; it is exclusively for shaping it. Used condition, complete, with visible signs of use consistent with its age. Ideal for locksmith shops, tool rooms, maintenance departments, as well as restoration work and one-off or small-batch production.

Stanje: zelo dobro (rabljeno), Naprodaj CNC vrtljiva miza priznane znamke Fadal Engineering (ZDA), model VH65. Profesionalna 4. os, namenjena obdelovalnim centrom, predvsem Fadal VMC, možna pa je tudi integracija z drugimi CNC stroji z ustreznim krmilnikom. Tehnični podatki: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Industrijski več-pinski konektor • Serijska številka: 4630298. Stanje: rabljeno, mehansko brezhibno, običajni znaki uporabe. Trdna in težka konstrukcija – idealno za natančno 4-osno obdelavo. Fodpfx Ahsw R St Njmegc

Stanje: zelo dobro (rabljeno), Na prodaj profesionalna CNC vrtljiva miza priznanega proizvajalca Fadal Engineering (ZDA, hčerinska družba Giddings & Lewis Inc.), model VH65. Opremljena s stružnim vpenjalom Röhm ZG Ø125 mm, kar bistveno poveča vsestranskost uporabe. Tehnične specifikacije: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Stružno vpenjalo Röhm ZG Ø125 mm – maks. 4000 vrt/min, moment 80 Nm • Serijska številka: 6660297 • Industrijski večpin priključek Stanje: rabljeno, mehansko popolnoma delujoče, običajni znaki uporabe. Masivna, težka konstrukcija – jamstvo za natančnost in dolgo življenjsko dobo. Pripravljena za uporabo kot dodatna 4. os v obdelovalnem centru. Fsdpfx Aew R Syishmsgc

Stanje: zelo dobro (rabljeno), A robust industrial machine of German manufacture: Walther Trowal, model DLT 4, year 1980. The device is designed for surface finishing of metal, aluminum, or plastic components, using the vibratory finishing process (deburring, edge rounding, polishing, cleaning). Classic rotary drum construction – reliable, heavy-duty, and durable, typical of "West Germany" manufacturing. Technical specifications: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz Fgedpfoxmlinox Ahmjc • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Machine is complete, drum rotates freely and smoothly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Electrical connection and possible inspection required. • Ideal for a tool shop, metal finishing plant, or production line. Applications: • Deburring and cleaning of components after machining. • Polishing of metal or aluminum parts. • Finishing of bolts, bushings, stamped components, castings, and precision parts. Condition: used, robust, classic Walther Trowal design – suitable for light refurbishment or ready for immediate use.

Stanje: zelo dobro (rabljeno), Na prodaj industrijska črpalka priznane znamke Grundfos. Model SPK 4-8 – vertikalna večstopenjska črpalka, namenjena za čiste tekočine, hladilne tekočine, industrijske instalacije ter CNC stroje. Tehnični podatki: Proizvajalec: Grundfos Model: SPK 4-8 A-A-A Moč: 0,55 kW Vrtljaji: 2850 obr/min Pretok: cca 3 m³/h Dvižna višina: do 28 m Temperatura tekočine: max. 90°C Država proizvodnje: Danska Stanje: Rabljeno, delujoče. Vidni znaki uporabe (praskice, manjše sledi korozije – glej slike). Vidna razpoka na ohišju pri priključku – ne vpliva na delovanje (priporočamo preverbo s strani kupca). Fgedpfxjywpahs Ahmoc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Fjdpfxjfdkb To Ahmogc - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Fjdpfx Ahjd Tbbdemjgc - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fgsdpfxjd Tqals Ahmsc - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Fjdpfeguk A Hsx Ahmogc Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard Fgsdefdkb Uspfx Ahmec - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Fgjdpfsfdkbhox Ahmoc - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Fsdeguk Dkjpfx Ahmsgc - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) Fedjguk Dvepfx Ahmegc - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: dober (rabljeno), Leto izdelave: 2016, nosilnost: 1.200 kg, dvižna višina: 7.150 mm, gradbena višina: 2.900 mm, obratovalne ure: 3.475 h, vrsta goriva: električni, tip droga: triplex, Proizvajalec + model: STILL EK-X 48 Dvižni steber: 3F7150 ID: 26041.5289 Kategorija: Rabljeno Dvižni steber: 3F Fsdpfx Ahszaf Hhemegc Spuščena višina: 2900 mm Dvižna višina: 7150 mm Nosilnost: 1200 kg Višina platforme: 6600 mm Višina pobiranja: 8200 mm Enota: Da Širina kabine: 1200 mm Leto: 2016 Delovne ure: 3475 ur Kapaciteta: 48v / 620ah Opcije: Polna oprema!! - Dvižni steber Triplex - FFL - Dvojno krmiljenje!!! - Nastavljive vilice! - Indukcijsko/vodeno vodenje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, nosilnost: 1.000 kg, dvižna višina: 5.800 mm, gradbena višina: 2.450 mm, obratovalne ure: 955 h, vrsta goriva: električni, tip droga: triplex, Proizvajalec + model: STILL EK-X 24 Dvigalo: 3F5800 ID: 25091.5029 Kategorija: Demo Dvigalo: 3F Znižana višina: 2450 mm Višina dviga: 5800 mm Nosilnost: 1000 kg Višina platforme: 5250 mm Višina komisioniranja: 6850 mm Iniciacija: Da Širina kabine: 1200 mm Leto: 2019 Delovne ure: 955 ur Kapaciteta: 24 V / 840 Ah Možnosti: - Triplex dvigalo - popoln FFL, KOT novo! Fedpfxezafzro Ahmegc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, nosilnost: 1.000 kg, dvižna višina: 6.150 mm, gradbena višina: 2.830 mm, obratovalne ure: 677 h, vrsta goriva: električni, tip droga: triplex, Fabrikant + model: STILL EK-X 48 Mast: 3F6300 ID: 25043.7302 Categorie: Demo Masttype: 3-delige vrije heffing Ingeschoven hoogte: 2830 mm Hefhoogte: 6150 mm Hefvermogen: 1000 kg Platformhoogte: 6300 mm Orderverzamelhoogte: 7900 mm Cabinebreedte: 1200 mm Bouwjaar: 2018 Bedrijfsuren: 677 uur Batterij: 48 V / 620 Ah Opties: Zeer uniek! Fjdpfxezafvij Ahmjgc - Elektrisch in hoogte verstelbaar dashboard - Doorloopplatform geschikt voor EURO-pallets - Originele STILL veiligheidspoorten (met beveiligingssysteem) - 2 x Blue spot Compleet, als nieuw!