Kx 019 4 nakup rabljenega (32.618)

Stanje: zelo dobro (rabljeno), Naprodaj CNC vrtljiva miza priznane znamke Fadal Engineering (ZDA), model VH65. Profesionalna 4. os, namenjena obdelovalnim centrom, predvsem Fadal VMC, možna pa je tudi integracija z drugimi CNC stroji z ustreznim krmilnikom. Tehnični podatki: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Industrijski več-pinski konektor • Serijska številka: 4630298. Stanje: rabljeno, mehansko brezhibno, običajni znaki uporabe. Trdna in težka konstrukcija – idealno za natančno 4-osno obdelavo. Itedpfx Ajw R St Njg Aep

Stanje: skoraj kot novo (rabljeno), Treif Broodsnijmachine 4-24MM In goede werkende staat. Voor meer informatie kunt u een aanvraag sturen. Itedpoumpg Rofx Ag Asp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Itjded Tqaljpfx Ag Aop Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, višina police: 3.500 mm, dolžina opore: 2.700 mm, dolžina police: 8.500 mm, višina okvirja: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: Iedpfx Aov Ukz Aeg Aetp - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: zelo dobro (rabljeno), Centerless brusilni stroji. Različne dimenzije in znamke. Likvidacija zaloge. Itjdpfx Aew U N Avjg Asp Brusilni stroj bed 5. Vodilni kamen 250 mm. Avtomatski podajalec. Cena 6000 evrov. Brusilni stroj bed 4, avtomatski podajalec, cena 5500 evrov. Brusilni stroj Heminhausen Sr 4. Vodilni kamen 250 mm, avtomatski podajalec. Cena 5500 evrov.

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Iedpfx Ajtp I S Aeg Astp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100–1100 kW - Design: ZM-LN Iodpfx Aewgyrtsg Astp - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Design: ZM - Year of manufacture: 2013

Stanje: rabljeno, Diese Anzeige bezieht sich auf den LABCOLD RLDF1520 Klimaklasse 4 Kühlschrank. Das Gerät ist voll funktionsfähig und sofort einsatzbereit. Der LABCOLD RLDF1520 ist ein apotheken-/impfstoffgeeigneter Kühlschrank, entwickelt für die Lagerung von temperaturempfindlichen Arzneimitteln, Impfstoffen oder biologischen Materialien. Hauptmerkmale und technische Daten: Eigenschaft Spezifikation / Detail Kapazität: ca. 430 Liter Außenmaße (H × B × T): 1.860 mm × 600 mm × 700 mm Itedpfexhdthox Ag Aop Temperaturbereich: +2 °C bis +8 °C (Nennbetrieb ca. +5 °C) Steuerung/Überwachung: „IntelliCold™“-Regler, 24/7 Temperaturaufzeichnung, Alarme (Hoch-/Tieftemperatur, Tür offen, Stromausfall) Isolierung/Konstruktion: Gehäuse aus emailliertem Stahl, Innenraum aus korrosionsbeständigem, lackiertem Aluminium; Umluftkühlung mit Ventilator; automatische Abtauung im Stillstand Türtyp: Geschlossene Tür (keine Glastür) Weitere Merkmale: Türschloss mit Schlüsseln, Zugang für Messsonde, Kontakte für Fernalarm, Datenspeicherung (13 Monate) Stromverbrauch / Energiebedarf: ca. 5,52 kWh/24h (Wert bezogen auf ein vergleichbares 440-Liter-Modell) Fazit: Es handelt sich um ein robustes, normgerechtes Kältegerät, konzipiert für den Einsatz in der Kühlkette (Lagerung von Arzneimitteln, Impfstoffen, Biologika), nicht für den allgemeinen Haushalts- oder Lebensmittelbereich.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Itedsfdkb Topfx Ag Aep Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131 CNC Machining Centre FORMAT-4 profit H10 22.43 Used, year of manufacture 2017 Operating hours approx. 1800 h Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300 CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data: Phenolic resin matrix table system Grid table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control console Handheld terminal for remote axis control Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24,000 rpm Central extraction via combined connections (D=250mm) Software: Woodflash German (H20/H08/H10/H50) Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Feeding Unit FORMAT-4 L-Motion Technical Data: Year of manufacture 2017 2-axis version with 4 storage positions for loading an H10 with lifting table CNC loading Gentle transport Fully automatic panel handling Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3 Stack height 1800 mm Extraction System FELDER RL 300 Technical Data: Year of manufacture 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar at 40 NL/min Operating pressure in the unit 6 bar Chip container volume 500 l Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation Errors in description and price reserved Dismantling and loading by us is available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Iedpfx Agsrrh T Aj Ajtp Sale takes place in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as seen Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.000 mm, skupna masa: 1.300 kg, Technical data: Itsdpfx Agjvuphue Aep Hopper opening: Length x Width 1250 x 1000 mm Length x Width 1250 x 1000 mm Cutting unit opening: Length x Width 562 x 462 mm Number of shafts: 4 thereof: Cutting shafts 2 Number of cutting discs: 23 Shaft speed: 25 rpm.

Stanje: novo, PRODAJA IZ ZALOGE Nosilnost: 240 kg Maksimalna višina platforme: 4 m Število oseb: 1 Dimenzije platforme: 1,15 x 0,6 m Skupna dolžina: 1,32 m Skupna širina: 0,76 m Skupna višina: 1,92 m Podaljšek platforme: 0,55 m Nosilnost podaljška: 100 kg Hitrost dviga/spusta: 34/25 s Notranji obračalni radij: 0 Maksimalen naklon: 1,5°/2° Pogonske pnevmatike: 230 x 80 mm Prevoznost klančin: 25 % Medosna razdalja: 1,0 m Hitrost vožnje (zloženo): 4 km/h Hitrost vožnje (dvignjeno): 0,5 km/h Baterija: 2 x 12 V / 100 Ah Dvižni motor: 24 V / 1,3 kW Pogonski motorji: 24 V / 0,5 kW Polnilec: 24 V / 15 A Teža: 660 kg Proporcionalno upravljanje Samodejna zaščita pred luknjami Vožnja v maksimalni višini Pnevmatike, ki ne puščajo sledov Samodejni zavorni sistem Sistem za zasilno spuščanje Gumb za zaustavitev v sili Itedpfjulah Nox Ag Aop Ventil za zadrževanje cilindra Vgrajen diagnostični sistem

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Itjdpfowg R I Ejx Ag Ajp Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Leto izdelave: 1980, Stanje: rabljeno, Orodje za ostrenje VOLLMER FINZ 4-800 Ijdpfxjcw Dg Dj Ag Aotp Lokacija: Gorzów Wielkopolski. Pogoji dostave: Osobni prevzem Stroški dostave: Kupec krije stroške Način zagona: Po dogovoru Opis: Opombe: AVTOMATSKI STROJ ZA BRUŠENJE HIDRAVLIČNO PODPRTIH KROŽNIH PLOŠČ WIDIA

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Iodsfdkb Uopfx Ag Aotp Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: pripravljen za uporabo (rabljen), model krmilnika: Haas, lastna masa: 12.000 kg, skupna dolžina: 5.950 mm, skupna širina: 3.048 mm, skupna višina: 2.200 mm, premer nihanja nad prečnim premičnikom: 2.000 mm, CNC Hollow Spindle Slant Bed Oil Country draaibank Draaibank met grote doorlaat (holle spil), schuine bedconstructie, geschikt voor oil country toepassingen Iedpfx Agswu Ipij Ajtp Draaidiameter boven bed: 1350 mm Draaidiameter boven langsgeleider: 400 mm Spilboring: 270 mm Spilmotorvermogen: 55 pk Toerentalbereik: 1 – 500 tpm Uitgevoerd met dubbele klauwplaat en spanenafvoerband

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, 4 kos nerjavečih lijakov 3 kos lijakov Dimenzije: 700 mm x 1200 mm x 1220 mm (V) 1 kos lijak, dimenzije: 1200 mm x 1200 mm x 1220 mm (V) Oprema vključuje: - Ročno zaporno loputo - Pokrov z odpiranjem na plinskih vzmeteh - Notranje inox sito Isdsurf Twepfx Ag Aetp - Mobilnost na zaklepnih kolesih - Nekateri lijaki z vgrajeno pnevmatsko vibracijsko napravo - Nekateri lijaki z integriranim nivojskim senzorjem Lijaki so v odličnem stanju.

Stanje: dober (rabljeno), 4 x Bonfiglioli Wind turbine gearbox JB00001227 SN B6201603697 Itsdpfx Aowg E Uteg Aep

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), Four-sided planer, 8 heads, HARBS Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head arrangement: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Ijdpfxjl Dw Nxo Ag Aotp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. Itodefdkbhepfx Ag Asp According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: rabljeno, Nordson Problue 4 vroča talilna črpalka Model Problue 4 Komplet s 2 grelno cevjo in dozirnima pištolama, zračni solenoid in moduli Posoda za nanašanje lepilnih kroglic / shranjevalni zaboj Iodpswq Sv Ejfx Ag Aotp Nameščeno na okvir iz nerjavečega jekla

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards Isdod Tbbdspfx Ag Aotp - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Itjdpfx Aoguk Dkog Ajp - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Isdeguk Dvepfx Ag Astp Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Iodpfx Aoguk A Hjg Ajtp Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.