Ktl nakup rabljenega (162)

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machinery transporter / aerial work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab parking heater, 2 kW • 33 l refrigerator with freezer compartment, under bunk • Air suspension on front axle(s) • Gearbox / I-Shift operation via driver seat control unit • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topography and traffic information • Eco cruise control (cruise control), including brake cruise control • Manual shifting possible in automatic mode (including kickdown) • Adaptive traction control • Adaptive cruise control (ACC) with collision warning and emergency braking function • Lane departure warning system • Side collision avoidance and turning assistant (both sides) • Driver alert system, warns of drowsiness • VEB Volvo Engine Brake • etc. WIESE superstructure for aerial platform and construction machinery transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Superstructure dimensions: - Approx. 9,050 mm usable length - External width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unloaded - Robust, weight-optimized steel welded construction, high-volume design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - Outside frame profile 90° - Front bulkhead reinforced - Storage box inside lower front bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel storage boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame - Longitudinal beams each with Multi-X contour over whole length with multiple lashing points 2.5 t - 4 lashing eyes 8 t recessed at rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front bulkhead (left/right/center/center) - Outside frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual / telescopic ramps, both ramps are laterally adjustable - Ramp can be used as a loading ramp and as a drive-over ramp for warehouse technology (telescopic section remains closed), the fixed ramp part is laid onto the dock ramp - Sturdy tension bar as transport lock (alternative with belt tensioning) - 2 hydraulic rear supports with plates, with audible warning and control light in cab - Ramp and supports operated via electro-hydraulics - Remote control operation and emergency control at control block - Control block installed in stainless steel toolbox at frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access with handholds left and right for loading area walk-on - 5 stainless steel drawer-type toolboxes, including lighting as optional extra - Side paneling as per sample images (green vehicle), available as option for extra cost - Superstructure coating KTL - Ball head trailer coupling at rear, 3.3 t Godpsw Itmrjfx Ahmsbn - 4 LED work lights - 2 LED rear lights mounted at top of front bulkhead - 4 external LED work lights on frame for area lighting - 2 LED work lights at rear - 1 removable rotating beacon at rear Stock vehicle comes with cab in white and superstructure in nova grey (external frame painted in RAL color of your choice upon request)

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Gbedpfxot Izpyj Ahmsn Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 29.831 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer Mega Platform Semi-Trailer Immediately Available Gbeder Ivwvjpfx Ahmen TECHNICAL DATA: * K.SFS M / 90 - 12 / 27 DE * Fifth Wheel Height: 950 mm * Kingpin Capacity: 15,000 kg * Axle Load: 27,000 kg * Gross Vehicle Weight: 42,000 kg * External Length: 13,680 mm * Internal Length: 13,610 mm * Overall Width: 2,550 mm * Internal Width: 2,480 mm * Wheelbase: 7,700 mm * Gooseneck Height: 90 mm * Unladen Weight ±%3: 6,169 kg CHASSIS: * Manufactured from high-quality, high-strength S460 MC steel * KTL-coated and painted * K-Fix (Lashing holes on the outer frame; load capacity 2.5 tonnes) * 3 x 9-tonne BPW EAC (ECO Air Compact) axles with disc brakes * 1st axle liftable, automatic * Wabco braking system * Air suspension with lifting and lowering valve * 6 x 445/45 R19.5 tyres * JOST mechanical landing gears * 30 mm phenolic resin-coated plywood floor with 8,000 kg forklift axle load capacity according to EN 283 * KTL-coated steel front wall with internal plywood protection, 2,000 mm height ADDITIONAL EQUIPMENT: * Front wall height 2,000 mm * 1 x steel toolbox with PVC coating, 1,500 mm wide, positioned in front of axles * 2 x 4 RoRo rings according to EN 29367-2 * 13 x 2 lashing rings with 2-ton capacity in floor, and 7 x 2 lashing rings with 5-ton capacity in side frame * 7 x 2 stake pockets on outer frame and 5 stake pockets centrally * Additionally 2 x 2 stake pockets at the front * 4 x 2 container twistlocks for transporting 1 x 40 ft. or 2 x 20 ft. containers * Oversized load signs (LED) * 7 x 2 lashing points on the outer frame with 1 t capacity * Stake storage box on front wall COLOURS: * Chassis colour: RAL 3020 Traffic Red * Front wall colour: RAL 3020 Traffic Red For further information, feel free to contact us.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, KEMPF SKM 36/3 AK – 3-Axle Aluminium Tipping Semi-Trailer 50 m³ – New Vehicle ----Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH * Model: SKM 36/3 AK * Design: 3-axle tipping semi-trailer with aluminium box body * Destination country: Germany * Permissible gross weight: 36,000 kg * Axle load: 3 × 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal coupling height (laden): approx. 1,200 mm (technically possible: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: approx. 2,430 mm * Body height: approx. 2,300 mm * Body volume: approx. 50.3 m³ * Overall height: approx. 3,710 mm up to loading edge (laden) ----Paintwork / Design * Chassis: Deep black RAL 9005 * Attachments: Hot-dip galvanized and black powder-coated * Axles and hubs: Black (KTL-coated) * Body: White aluminium RAL 9006 * Tarp: Silver No. 911 (Mehler) * Conspicuity markings side (white) and rear (red) according to EC regulations ----Chassis and Running Gear Gbjdexn Eb Hepfx Ahmjn * Frame: High-grade welded construction made from fine-grained steel, conically cranked (approx. 80 mm) * Axles: SAF INTRADISC plus Integral – off-road version, disc brakes Ø 430 mm * Lift axle: 1st axle, fully automatic, liftable, with forced lowering in unladen mode * Air suspension: Air suspension units with small air bellows (300 mm), plastic covers * Air tanks: Aluminium version * Landing legs: 2 aluminium drop supports, max. 24 t (2 × 12 t) * Mudguards: PVC half-shells with rigid spray suppressor * Toolboxes: 2 PVC, black, each approx. 660 × 500 × 460 mm * Side underrun protection: right side * Ladder: Removable, aluminium, approx. 4,000 mm long * Access ladder: extendable at the rear (not UVV-compliant) ----Rear Under-run and Rear End * Folding steel underrun protection according to ECE R58.03 * With spring-assisted lift and integrated towing eye * Continuous KEMPF mudflap with large reflective panel (200 × 1,130 mm) ----Lighting and Electrics * Complete LED lighting according to ADR standard * Side marker, position, reversing, and rear fog lights in LED * 2 LED work lights (left/right) * Cargo area lighting with switch and indicator light * 15-pin electrical connection * Round lights with chrome rings * Without reversing camera ----Tyres * Rims: Alcoa Ultra ONE aluminium wheels, Dura-Bright EVO, ET 120 * Tyres: 385/65 R 22.5, brand per Kempf's choice ----Braking system and Safety * Electronic braking system (EBS) Wabco with RSS (Roll Stability Support) * ABS 4-channel (4S/2M) * Parking brake via spring actuators * Axle load indicator via EBS CANbus (display in cab possible) * Trailer information module SmartBoard (Wabco) * Tyre pressure monitoring system (TPMS) to ECE R141 ----Hydraulics * Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system * Smallest piston hard-chromed * Hydraulic connection: Edbro 1" screw-type coupling ----Body / Tipping Body * Aluminium rear-tipping body made of hollow profiles * Front wall: 20° sloped, approx. 5 mm thick, with reinforced supports for front ram * Floor: approx. 7 mm thick, annealed aluminium * Side walls: Aluminium hollow profiles, continuous 2.5 mm inner wall, fully welded * Rear wall: Straight, pendulum, 2-wing (2/3 left, 1/3 right), automatic pneumatic locking * Rear wall control: left switch (pendulum function), right switch (door function) * Grain-tight design * Slider: approx. 400 × 400 mm, lever operated to the left * Dust bag with adapter frame (hopper approx. 250 mm high) * Walkway with g

Stanje: novo, največja dovoljena obremenitev: 37.650 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SHG Multi Extendable Container Chassis Godpfxomxfp As Ahmjbn TECHNICAL INFORMATION: * Overall length - retracted: 9,485 mm * Wheelbase retracted P(W): 6,050 mm * Overall width (W): 2,550 mm * Neck height (NH): 130 mm * Fifth wheel height (H5): 1,100 mm * Overall height: 3,990 mm * Axle load: 27,000 kg * Kingpin capacity: 16,000 kg * Gross vehicle weight: 43,000 kg * Unladen weight: 5,353 kg * Overall length F1+M2+R3 Pos.: 12,552 mm * Overall length F1+M3+R2 Pos.: 12,552 mm * Overall length F3+M3+R4 Pos.: 14,080 mm * Overall length F2+M3+R4 Pos.: 13,964 mm CHASSIS AND DRIVETRAIN: * Chassis made of high-quality, high-strength S700 MC steel * Chassis with KTL coating * BPW axles with air suspension and disc brakes * 1st axle automatically liftable, EBS controlled * Tyres 385/55 R22.5 * Jost landing gear OTHER: * 5x2 container locks * Suitable for transporting 1x20 ft at the rear, 2x20 ft, 1x30 ft, 1x40 ft ISO, 1x40 ft HC, 1x45 ft HC ST, 1x45 ft HC LT, and 1x13.60 CB (special permit required) * Wabco braking system * 1x plastic toolbox * 2 rear warning panels in accordance with UN ECE R70 regulation * Partial metallization * Chassis color: MB7350 Nova Grey For further information, we are happy to assist you.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab auxiliary heater, 2 kW • 33 l coolbox with freezer compartment under bunk • Air suspension on the front axle(s) • Transmission/I-Shift operated via control unit on driver's seat • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topographical and traffic data • Eco Cruise Control (cruise control) including brake cruise control • Manual gear selection possible in automatic mode (incl. kickdown) • Adaptive Traction Control • Adaptive Cruise Control (ACC) with collision warning & emergency braking • Lane Keeping Assist • Side collision avoidance & turn assist (both sides) • Driver alertness warning system for fatigue • VEB Volvo Engine Brake • etc. WIESE bodywork for aerial platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Usable length approx. 9,050 mm - External width 2,550 mm - Platform height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-type design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced design - Internal storage box at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN axle load - Above axles: steel toolboxes & outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 tonnes, flush-mounted in outer frame - Longitudinals each with Multi-X contour along the entire length, many lashing points 2.5 tonnes - 4 lashing eyes 8t at the rear, recessed (left/right/center/center) - 4 lashing eyes 8t at front bulkhead, recessed (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/split ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse technology (sliding part remains closed), fixed ramp section placed on hall ramp - Heavy-duty locking bar for transport security (optional with strap lock) - 2 hydraulic rear supports with plates incl. warning buzzer & indicator light in cab - Ramps and supports operated by electro-hydraulics - Control via radio remote and emergency control at control block - Control block mounted in stainless steel toolbox at side of frame - Superwinch, 8.2 t, with approx. 20 m steel cable - Access steps with handrails left and right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, at extra cost) Gedpfx Aow Itmlshmjbn - Side fairings as per sample images (green vehicle), option at extra cost - Body coating KTL - Rear tow hitch (ball), 3.3t - 4 LED work spotlights - 2 LED rear lights mounted high on bulkhead - 4 LED external work lights on frame for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (outer frame painted to RAL color by request).

Stanje: novo, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 30 m³, Leto izdelave: 2026, Oprema: ABS, Chassis Welded construction, weight-optimized from high-grade S700 steel * Axle spacing 1310 mm, distance king pin to 2nd axle: 4800 mm * 3 axles – technical axle load 9000 kg: SAF disc brake axles INTRADISC ET 120, air suspension * Axle lift on first axle (automatic / pneumatic) * 2" king pin, according to SAE standard (interchangeable) * 2-speed gearbox landing legs full load * Side underrun protection made of aluminum profiles (foldable), according to ECE R73 * Rear underrun protection made of steel according to ECE R58 – rear underrun guard manually foldable, spring assisted * Unladen fifth wheel height: 1200 mm Braking system * Dual-circuit compressed air brake system by WABCO, ECE compliant * Anti-lock braking system EBS 2S/2M with vehicle stabilisation function * Double diaphragm spring brake cylinders * Aluminum air tanks * Lift and lowering device (HS-valve) * Automatic tipping lowering, can be deactivated * Spring pressure gauge * ISO coupling heads yellow/red Wheels and tyres * Tyres, 6 x 385/65 R22.5 – aluminum rims by brand ABERG (22.5x11.75) ET 120 Gbedpfx Ahoy I E Ebjmen * Tyre brand Hankook * Protective caps for wheel nuts Electrical installation * Lighting system 24V ECE compliant * LED rectangular tail lights: Aspöck EcoLED III * LED lighting: license plate light, marker lights, side marker lights – synchronous flashing * LED reverse lights at the rear – 2 pcs * Front connection sockets 2x 7-pin and 1x 15-pin, as well as EBS socket (without connecting cables) Body specification * Semi-circular tipping body made of high-grade steel, conical design, capacity 30 m³, internal height 1765 mm, floor 4 mm and side walls 3 mm of HARDOX HB450, front wall and tailgate 4 mm, front wall inclined 20°, internal steps * Tailgate as overhead pendulum door with automatic 2-hook rear lock, side tension locks, replaceable rubber seal, slider centrally mounted with additional screw locks at the bottom * Rear wall mounted with double joint * Tipper damping POLYP * Hydraulic cylinder, eye mounting, HYVA 250 bar * Hydraulic connection kit 1" * Work platform mounted on chassis, access front left (changeable) * PVC roll tarp 680 g/m² with quick release * Aluminum tarp pole with hand crank * 3 tarp bows * Tension chain between the side walls Painting / Colour specification * Steel parts sandblasted twice before painting * KTL surface coating * Painted in spray booth * Frame: RAL 9005 deep black * Body: RAL 9005 deep black * Landing legs: black * Axles: black * Wheel hubs: black * Rims: aluminum * Add-on parts: galvanized * Roll tarp: RAL 9005 deep black Other equipment * 2 plastic wheel chocks * 6 single wheel mudguards (plastic), rear mudguards with splash protection * PVC toolbox 44L, lockable, mounted on work platform right * Water tank 30L, with soap dispenser, mounted on chassis left * Aluminum access ladder L-2840 mm, above right mudguard * Full-length mudflap on underrun guard * Partial contour marking according to EC regulations * Partial contour marking with Wielton logo, side white, rear red * Reflective warning panels Additional systems * Control line for lift axle from the driver’s cab * TPMS sensors for tyre pressure and temperature monitoring, manufacturer ABERG Connect

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Krone SDP 27 Stepdeck Semi-Trailer with Spreader Rear – Immediately Available Photos of the spreader rear to follow shortly * Coupling height unladen: 1,180 mm Gedpfstrib Ejx Ahmsbn * Multilock external frame, universal load securing options every 100 mm * For load compartment length: 13,620 mm internally; lower deck 9,610 mm / platform 4,010 mm, load compartment width 2,480 mm internally * 3 axles, each with 9,000 kg load capacity * Wheelbase: 1,310 / 1,310 mm * BPW running gear with air suspension * Drum brakes, 300 x 200 mm (for 17.5" rim) * Fully automatic electronic lift axle control for the 1st axle, load-dependent * Air suspension with raise/lower function, including automatic ride height reset * 12-position tyres, 235/75 R 17.5 * Multi-function full LED rear lights * Incl. 1 reversing spotlight * 2 additional LED reversing spotlights * 1 toolbox, plastic, 650x490x450 mm * 1 additional toolbox, plastic * Combination: truck-mounted forklift / hydraulic rear extension * 30 mm thick, water-resistant laminated flooring, suitable for axle loads up to max. 7,000 kg (forklift axle) * Hydraulic lifting roof, total lift 500 mm * Load securing certificate according to EN 12642 Code XL * Load securing certificate for beverage transport (VDI 2700 part 12) * Steel components shot-blasted, KTL primed with zinc phosphating and powder-coated * Chassis incl. outer frame RAL 9005 JET BLACK * Curtain colour RAL 9006 WHITE ALUMINIUM * Body (front wall, rear portal, rear wall) RAL 7035 LIGHT GREY For further information, please do not hesitate to contact us.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Krone SDP 27 Mega Curtainsider Semi-Trailer * Multilock external frame * Krone axles with air suspension and disc brakes * Air suspension with lift and lower function * Automatic, load-dependent electronic lift axle control for the 1st axle * Axle cap mileage counter * 6x 435/50 R 19.5 tires Gbedjvw Hkxopfx Ahmen * Spare wheel carrier * Knorr braking system * Multi-function rear lights (full LED) * 2 additional LED reversing lights * 1 plastic toolbox * 30 mm thick, waterproof panel floor * Hydraulic lifting roof with 500 mm total lift * 3 pairs of KRONE mid-posts * Load securing certificate according to Daimler Directive 9.5 * Load securing certificate for beverage transport (VDI * 2700 Sheet 12) * Load securing certificate according to EN 12642 Code XL * Chassis including external frame RAL 9005 JET BLACK * Axles incl. wheel hubs RAL 9005 JET BLACK * Attachments BLACK OR GALVANIZED * Rims NATURAL SILVER * Side underrun protection WHITE POWDER-COATED * Rear underrun protection WHITE POWDER-COATED * Lighting carrier WHITE POWDER-COATED * Mid-posts (curtain side) KTL PRIMED * Body (front wall, rear portal, rear wall) RAL 7035 LIGHT GREY * Landing gears RAL 9005 JET BLACK * Curtain color RAL 9006 WHITE ALUMINUM Sample photos We are happy to provide you with further information upon request.

Stanje: rabljeno, največja dovoljena obremenitev: 31.170 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2022, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 13.000 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, 3-axle timber transport semi-trailer * 8x OptiPa bolster bodies * 16x OptiPa one-piece aluminium stakes * Robust front aluminium bulkhead, approx. 2,500 mm high * Maximum fifth wheel load approx. 12,000 kg * Front overhang (king pin to front edge of load area) 1,550 mm * Air suspension with 3x 9t SAF axles * Reinforced axles for off-road use * First axle lift, automatic function with starting aid * On-board scales * Technically permissible gross weight: 39,000 kg * WABCO Smart-Board * EBS braking system * All lines routed and protected within the longitudinal beams * 3 mm smooth sheet metal covering welded between the longitudinal beams * Tyres: 6x premium brand tyres, size 385/65 R 22.5 * LED reversing and work lights * LED rear and marker lights * Plastic 180-degree mudguards over each axle * Round tube underrun protection mounted at the maximum permissible height * Shunting coupling at the rear Gbodpfx Asx H E Hpehmsn * Ten welded lashing rings per side * 2x toolboxes approx. 600x400x400 mm, plastic * Side impact protection, anodised aluminium * KTL coating with zinc phosphating, maximum corrosion protection Also available for short-term rental. For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 29.731 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.580 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Brand-new Kässbohrer K.SPS Platform Semi-Trailer Immediately Available Technical Data: * External length: 13,640 mm * Internal length: 13,580 mm * Axle spacing: 1,310 mm * Wheelbase: 7,700 mm * Overall width: 2,550 mm * Internal width: 2,480 mm * Gooseneck height: 200 mm * Fifth wheel height: 1,180 mm * Axle load: 27,000 kg * King pin capacity: 12,000 kg * Gross weight: 39,000 kg * Unladen weight: 6,269 kg * Pallet capacity: 33 Euro pallets load capacity Chassis: * BPW axles with air suspension and disc brakes * First axle liftable, automatic * Wabco brake system * Tyres: 6x 385/65 R22.5 * Axle pressure gauge Frame: * Made from high-quality, durable steel * KTL-coated steel front wall with interior plywood protection, 2,000 mm high * Hardwood floor, 30 mm thick, waterproof, with axle load capacity of 7,200 kg according to DIN EN 283 * Jost landing gears * LED lighting * Load securing system * K-fix with 96 holes per side, each lashing point rated for 2,500 kg * Additionally, 7x2 lashing rings on the floor with 5,000 kg capacity each * 6x2 container locks, suitable for 1x20 ft in the center, 2x20 ft, 1x40 ft container * Stake pockets outside + on the floor * Stake box underframe * Load securing certificate according to EN 12642 Code XL Other features: * 1x stainless steel toolbox * 4x oversize marker boards with LED lighting Chassis colour: MB 7350 Novagrau Gedpfoqbn R Nox Ahmobn For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 30.649 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 27 m³, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Schmitz Cargobull SKI 24 SL 7.2 | 3-Axle Tipper Semi-Trailer | Aluminium Body 27 m³ Technical Specifications: - Permissible Gross Weight: 36,000 kg (technically 39,000 kg) - Unladen Weight: approx. 5,351 kg (+/- 3%) - Volume: approx. 27.2 m³ - Internal Body Length: approx. 7,500 mm - Internal Body Width: approx. 2,440 mm - Sidewall Height: approx. 1,500 mm - Fifth-Wheel Load: 12,000 kg - Axle Load: 24,000 kg - Tyres: 6x 385/65 R22.5 on steel rims Chassis & Body: - Weight-optimised frame in new design - Standard 7.2 frame made of high-tensile steel, welded - Foldable underrun protection, suitable for road finishers - 2" kingpin according to SAE standard, replaceable - Lateral impact protection in Schmitz Granit - Plastic mudguards with separate lamp brackets - Mud flaps with Schmitz logo Axles & Suspension: - 3 x SCB 9 t ROTOS axle assembly, disc brakes Ø 430 mm Gbsdpfsy Iii Rex Ahmjn - Automatic/pneumatic axle lift on 1st axle with starting aid - Air suspension SCB MRH4-KU35 Hydraulics: - HYVA hydraulic cylinder 170–250 bar (low and high pressure operation) - Hard-chromed smallest stage - Hydraulic hose with screw coupling (1" female thread, max. 250 bar) - Bracket and parking position at working platform Braking System: - Two-line compressed air system with standard couplings - EBS 2S/2M incl. stability programme - Steel air tanks - Double diaphragm spring brake cylinders - Lifting and lowering device with auto-reset function - Load pressure gauge Electronics & Safety: - EBS power supply via ISO 7638 + CAN - Automatic lowering during tipping process - 2 wheel chocks with holders TrailerConnect®: - TrailerConnect control unit CTU incl. battery - CTU Module 1 (position & technical data, 12 months) - Data storage (12 months) - Tyre pressure monitoring system Lighting: - 24V lighting system with multi-chamber tail lights - 2x 7-pin sockets + 1x 15-pin socket - LED side marker lamps with indicator function - White front marker lamps - 2 LED reversing lights at the rear - LED lane position lights Body & Superstructure: - Aluminium box body 7,500 mm, height 1,500 mm, internal wall thickness 3.5 mm - Aluminium floor: rear 8 mm / front 7 mm - Front wall inclined 20°, with reinforced supports for front tipping cylinder - Working platform with front left access and ladder for entering the body - Rear wall flap made of aluminium, inclined, with continuous seal - 4 hook locks, mechanical, incl. additional toggle latches - Centrally positioned grain hatch with cover - Reinforced rear end Tarp & Frame: - PVC sliding roof tarpaulin, silver (RAL 9006) with side locks - Straight roof frame with swivelling/removable crossbars - Tarpaulin operation rod (short version) Paintwork: - Tipper body: Light grey RAL 7035 - Chassis: Nova grey - Wheels: Silver RAL 9006 - Wheel hubs: Black KTL-coated - Contour markings in red (rear) and white (sides) Approval: - Vehicle with German documents - EU type approval incl. CoC - "A" sign for waste transport For further information, please do not hesitate to contact us.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter ▪ FH 500 8x2R ▪ Trailing axle, electro-hydraulically steered, single tires ▪ Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ▪ High-roof long-distance safety cab FH ▪ Cab auxiliary heater, 2 kW ▪ 33 l cool box with freezer compartment, under bunk ▪ Air suspension on front axle(s) ▪ Transmission / I-Shift control via operator panel on driver's seat ▪ I-Shift driving modes: Standard, Performance, and Economy ▪ I-See with map-based topography and traffic information ▪ Eco cruise control (cruise control), including brake cruise control ▪ Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control ▪ Adaptive cruise control (ACC) with collision warning and emergency braking function ▪ Lane keeping assist ▪ Side collision avoidance and turn assist (both sides) ▪ Driver alert system for drowsiness warnings * VEB Volvo Engine Brake * etc. WIESE body for work platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length Gsdew Itl Uspfx Ahmjbn - External width 2,550 mm - Loading height on upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded structure, box-type construction - Short crossmember spacings for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced version - Internal bottom tool box in front of bulkhead - Grating floor - Suitable for wheel loads of up to 5,000 daN - Above the axles: steel plate tool boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into external frame - Longitudinal members with Multi-X profile along the entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed at the front bulkhead (left/right/center/center) - External frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 individual/stretch ramps, both laterally adjustable - Ramps can be used as drive-up ramps or bridging ramps for warehouse technology (stretch section remains closed), fixed ramp section placed on dock ramp - Sturdy tension bar as transport safety (alternatively with strap tensioning) - 2 hydraulic rear supports with footplates, warning buzzer and indicator light in cab - Ramp and support operation via electro-hydraulic system - Control by radio remote or manual emergency controls on switch block - Switch block mounted in stainless steel toolbox on the frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access steps with grab rail on right and left for walking onto loading area - 5 stainless steel drawer-type tool boxes, with optional lighting available at extra cost - Side skirting as shown in sample images (green vehicle), available as an option at extra cost - KTL coating for the superstructure - Spherical trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED reversing lights mounted high on bulkhead - 4 LED work lights externally mounted on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear Stock vehicle is supplied with cab color in white and body in nova grey (exterior frame painted in RAL color of y

Stanje: novo, prevoženi kilometri: 100 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new MAN 26.440 TGX 6x2-4 LL, configured as a transporter for construction machinery and aerial work platforms. Truck Specifications: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Warning beacons - Reversing camera - Multifunction steering wheel - 1 bunk bed - Refrigerator - Media system with navigation - Flatbed body – 100 km – 324 kW (441 hp) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (green emissions badge) - 26,000 kg GVW - Automatic climate control - White – Long-distance specification – etc. Body - Structure made from laser-cut and folded special profiles in low-bed design - Platform length approx. 8,850 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed section and 1 extendable section, ramps laterally adjustable - Ramp deck made of grid flooring, mechanical ramp locking including holder on outer frame when not in use (optional securing with straps) - Ramps powered by electro-hydraulic unit, including emergency operation on control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions controlled via remote control - Grid floor with increased load capacity - Rear with bevel – front bulkhead approx. 2,000 mm high with profiles bent inward - Stainless steel toolbox inside, in front of the bulkhead - 2 stainless steel toolboxes mounted laterally on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear wall of cab, 2 pairs on sides of frame, 2 pairs at rear - 2 steps for access to the cargo area Load Securing: - Longitudinal member incl. Multi-X contour with lashing points, 2.5 t Gbedpfx Ajxp S Uvshmjn - 6 pairs of 6 t lashing points integrated into the longitudinal member - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points in the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points below, in front of the front toolbox Painting: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grid flooring hot-dip galvanized Markings: - Reflective tape according to EU standards, on sides and rear. Further information available upon request.

Stanje: novo, največja dovoljena obremenitev: 30.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, Leto izdelave: 2026, Oprema: ABS, 3-axle timber transport semi-trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminium stakes * Robust aluminium front wall, approx. 2500 mm high * Fifth wheel load max. approx. 12,000 kg * Front overhang (kingpin to front edge of load guard): 1,550 mm * Air suspension with 3x 9t SAF axles * Axle reinforcement for off-road use * First axle lift, automatic function, with starting aid * On-board weighing system * Technically permissible gross weight 39,000 kg * WABCO Smart-Board * EBS braking system * All lines protected, routed within the longitudinal beams * 3 mm smooth steel plate cover, welded between longitudinal beams * Tyres: 6x premium brand, size 385/65 R 22.5 * LED reversing and work lights * LED rear and marker lights * Plastic mudguards, 180 degrees, over each axle * Rear underrun protection made of round tubing, mounted at the maximum permitted height * Shunting coupling at rear * Ten welded lashing rings per side * 2x toolboxes, approx. 600x400x400 mm, plastic Godpfx Ahsi Rtgqomobn * Side underrun protection, anodised aluminium * KTL coating with zinc phosphating for maximum corrosion protection Also available for short-term rental. Further information on request.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Krone SDP 27 platform semi-trailer (sample images) * Coupling height: 1,150 mm * Multilock outer frame, universal load securing options every 100 mm * Pallet box for 24 Euro pallets * 10 pairs of stake pockets in the outer frame * 10 central stake pockets in the floor * 12 plug-in stakes, 1,950 mm long * 4 pairs of lashing points for sea transport * Container locks for 1x40', 2x20', 1x20' (centered) up to 25 t * Two mechanical landing legs * Krone axles with air suspension and disc brakes * Wheelbase: 1,310 mm Gbodpfsvw Hmaex Ahmjn * Air suspension with lifting and lowering device, including automatic ride height reset * Load-dependent, fully automatic electronic lift axle control for 1 axle * Axle cap mileage counter * 6 x 385/65 R 22.5 tyres * Spare wheel carrier (basket variant) * Wabco braking system * LED lighting * Multifunctional rear lights * 1 reversing light * Plastic toolbox * 2 sets of oversize signs including marker lights * Stake depot, left and right sides * 30 mm thick, waterproof plywood floor * Steel front wall, 2,000 mm high * Steel components shot-blasted, KTL-primed and powder-coated * Chassis incl. outer frame, RAL 9005 deep black * Axles incl. wheel hubs, RAL 9005 deep black For further information, please do not hesitate to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) Gbedpfswyhy Ejx Ahmsn * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: rabljeno, največja dovoljena obremenitev: 44.980 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt of the equipment list. Complete equipment details available upon request. Chassis, cranked * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, robust outer frame * 4-axle configuration. Wheel arch covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodised aluminum * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked area for maximum low-bed length in combination with AluLeg drop supports instead of telescopic landing gears, maximum rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake extension * Self-supporting aluminium roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with spring-assisted tension relief * Additional central stake locks in the roof beam and parking position, operated via pull cord and spring latch * Mechanically height-adjustable roof lift, adjustment height approx. 400 mm, can be operated from either side or single side without needing to open the opposite side and doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with stake height adjustment * Front overlap at bulkhead for driving under tarpaulin up to an overall height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, 450 mm pockets below, above 4 rows of single pockets * In the high bed, only 3 rows of slats. Intermediate distances evenly distributed Floor * approx. 27 mm special water-resistant bonded beech plywood, non-slip surface * Steel plate in wheel arch area Gbsdpfslthgusx Ahmon * Forklift accessible per DIN ? standard * Outer frame surface flush Brakes * WABCO air brake system with EBS complying with EC Directive 71/320 EEC incl. PREV (park-release safety valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes, low loader specification * Air suspension with raise/lower function, total lift approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electrical and mechanical locking Twin tires * 235/75 R 17.5, -16, incl. spare wheel holder. Without spare wheel Paintwork * Chassis in RAL 3002 red, solid color * Central stakes and axles KTL coated black * Corner posts galvanized finish * Plastic parts black * Galvanized parts unpainted * Rims in factory silver * Bodywork solid color per RAL shade Included special equipment * Air suspension with ECAS control, operated at the trailer * Oversize signage front and rear, galvanized, infinitely extendable, with marker lights incl. plug-in sockets for revolving beacons (small panels) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for flexible locking of central stakes * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize/height version, flat hooks, tarpaulin folds, closures with safety pawl / OCS * Left rear telescopic plug-in socket for revolving beacon incl. beacon * Outer frame for machine transport with approx. 64 securing points in 2,000 kg, 3,000 kg and 10,000 kg versions, according to construction release drawing * 1

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2018, skupna širina: 2.550 mm, skupna višina: 980 mm, Oprema: ABS, Krone ZZB18eLZ Dolly Mega or Standard, steered axle, SAF axles, 23,000 km, large Wabco Trailer Smart Board, one owner, as-new condition. Gedpfjzamq Ujx Ahmebn Technical Description: Frame constructed as I-beam longitudinal members welded with cross members. Fifth wheel mounted on turntable, installation height approx. 185 mm. Underrun protection according to EU regulations. Drawbar for steered axle with bolted 50 mm or 57.5 mm towing eye; length when coupled low 4,150 mm, extendable by 4x100 mm; length when coupled high 3,500 mm, extendable by 3x100 mm (measured from center of towing eye to center of fifth wheel plate). Front support with crank and gearbox. Actively steered dolly axle, low-maintenance with disc brakes (430 mm), ET 120, air suspension with lift and lower device, one valve, hub centering. Tyres: 4 units, size 445/45 R 19.5, brand as per Krone's choice. Wheel covers compliant with EC directives 78/549/EEC and 91/226 EEC with appropriate spray suppression system, black plastic quarter-shell mudguards with upper tarpaulin covering, rear with splash flaps. Braking system according to ECE-R13, incl. vehicle stability function, spring-loaded parking brake, EBS system, 2S/2M, 2 sensors on one axle, diagnostics via ISO7638 socket (EBS supply cable), palm couplings, brake connections for trailer positioned on a bar in the frame. Lighting and signal system as per ECE-R48, two 7-pole sockets DIN1185/3731, LED license plate, contour, and side marker lights, multifunction rear lights including 1 fog lamp and 1 reversing lamp, electrical trailer connections on rail in chassis, connection cable for trailer’s electrical and air systems included. Steel parts shot-blasted, KTL-primed and powder coated, standard single-color finish. Underrun protection and lighting bracket in white powder coating. Axles incl. hubs in RAL 9005; mounted parts in zinc black; rims in natural silver; contour marking as per ECE-R48. Despite the utmost care, errors in this advertisement cannot be excluded. Subject to errors and prior sale.

Stanje: novo, največja dovoljena obremenitev: 14.826 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, Leto izdelave: 2026, Oprema: ABS, 2-axle 18-ton Hüffermann sled-type roll-off trailer "NEW" Type HSA 3 / 20.71 ZB "Sled Carrier" for roll-off container lengths from 5.0 m up to max. 7.0 m, SAF axles 2x 10,000 kg air-suspended with automatic lowering when the brake is uncoupled, Wabco braking system, ABS, disc brakes with electronic brake and stability system EBS-E and RSS (significant reduction of rollover risk, reduced brake pad wear), weight detection/axle load display via EBS Canbus signal for display in the truck cab (truck must be pre-equipped accordingly), tire pressure monitoring system according to ECE regulation 141, automatic slack adjusters, certified load securing via quadruple pneumatic locks, side protection device in anodized and closed version, V-drawbar approx. 2,600 mm long, 40 mm towing eye, tool box 600 x 500 x 500 mm, tires 265/70 R 19.5 // 8-fold, Hella module lights partially LED, flashing LED side marker lights, 2 additional LED reversing lights, LED position lights front and rear, A-sign and folding ADR panel, contour markings: white on the sides, yellow at the rear, underrun protection with impact buffer and rear apron, 15-pin power supply, Duomatic coupling head, painted in RAL shade DB 7350 Novagrau, silver rims, axles in black KTL coating, mounted parts hot-dip galvanized, gross weight 18,000 kg, technically possible 20,000 kg, new vehicle, immediately available ex-stock Bünde, without first registration, incl. manufacturer's warranty, sale to business customers only! All information without guarantee! Errors and prior sale reserved! Gbodsyk N A Ijpfx Ahmen

Stanje: rabljeno, največja dovoljena obremenitev: 14.826 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2026, dolžina tovornega prostora: 7.000 mm, Leto izdelave: 2026, Oprema: ABS, 2-axle 18-ton Hüffermann sled-type roll-off trailer "NEW" Type HSA 3 / 20.71 ZB "Sled Carrier" for roll-off container lengths from 5.0 m up to max. 7.0 m, SAF axles 2x 10,000 kg air-suspended with automatic lowering when the brake is uncoupled, Wabco braking system, ABS, disc brakes with electronic brake and stability system EBS-E and RSS (significant reduction of rollover risk, reduced brake pad wear), weight detection/axle load display via EBS Canbus signal for display in the truck cab (truck must be pre-equipped accordingly), tire pressure monitoring system according to ECE regulation 141, automatic slack adjusters, certified load securing via quadruple pneumatic locks, side protection device in anodized and closed version, V-drawbar approx. 2,600 mm long, 40 mm towing eye, tool box 600 x 500 x 500 mm, tires 265/70 R 19.5 // 8-fold, Hella module lights partially LED, flashing LED side marker lights, 2 additional LED reversing lights, LED position lights front and rear, A-sign and folding ADR panel, contour markings: white on the sides, yellow at the rear, underrun protection with impact buffer and rear apron, 15-pin power supply, Duomatic coupling head, painted in RAL shade DB 7350 Novagrau, silver rims, axles in black KTL coating, mounted parts hot-dip galvanized, gross weight 18,000 kg, technically possible 20,000 kg, new vehicle, immediately available ex-stock Bünde, without first registration, incl. manufacturer's warranty, sale to business customers only! All information without guarantee! Errors and prior sale reserved! Gbedpeyk N Azefx Ahmsn

Stanje: novo, moč: 235 kW (319,51 KM), vrsta goriva: dizel, velikost pnevmatike: 385/65-22,5, konfiguracija osi: 4x2, medosna razdalja: 3.880 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 150 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 42.000 mm, širina tovornega prostora: 24.200 mm, višina nakladalnega prostora: 6.000 mm, Oprema: ABS, AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, računalnik na krovu, spojka prikolice, tempomat, zapora diferenciala, žerjav, - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/multimedia system - Rotating beacon - Reversing camera - Disc brakes - Sliding roof - Seat heating - Sun visor - Lane departure warning - Stability control - Windscreen Internal reference number for customer inquiries: 5-128 MAN TGM 18.320 4x2 BL WITH MEILLER Trigenius Three-way Tipper Body AND PALFINGER CRANE Vehicle: * MAN TGM 18.320 4X2 BL truck-mounted crane tipper * Tipper body 4200x2420 mm, manufacturer MEILLER, type TRIGENIUS (new series) Front wall height: 800 mm Sideboard height: 600 mm Fully retractable lashing eyes in body floor * Cab CC: the compact (narrow, short, standard height) * Wheelbase: 3,875 mm * Suspension: leaf/air * Drive: 4x2 * Tyres front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 * Gross vehicle weight: 18,000 kg * Automatic transmission: MAN PowerMatic 08.13 OD (8-speed transmission) * Diesel engine: MAN D0836 LFLBI, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e * Transmission functionality: EfficientRoll * Cruise control * Differential lock on rear axle * MEILLER Axial pump 270/45 * Tipper control inside the cab * MAN EasyControl control panel, 4 functions, operable from outside with door open * Trailer coupling RINGFEDER type 4040/G150B * 2-line brake connection at end of frame * Sun visor in front of windscreen * Central locking with remote control * MAN Media System Navigation Advanced 7-inch * Turn assist * Electronic Stability Program (ESP) * Traction control (ASR) * Cruise control (speed control FGR) * Adjustable speed limiter (engine governor) * Reversing Motion System * Smartphone integration * Heated and electrically adjustable main & wide-angle mirrors * Air-suspended driver comfort seat with lumbar support, shoulder adjustment & heating * Adjustable seatbelt height, driver seat * 2 work lights on cab roof * 2 halogen rotating beacons on cab roof * and much more. Loader Crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID TRUCK-MOUNTED CRANE with KTL coating * Hydraulic four-section extension - 11.7 m * Lifting moment: 142.4 kNm (14.5 mt) * Slewing range: 420° * Electronic overload protection PALTRONIC incl. emergency stop and load indicator * Operating hours counter with service interval indicator * Radio remote control Scanreco * LOAD and overload display PALTRONIC on remote control unit * 5 selectable speeds Also available from stock with Fassi F135AC0.24 crane!!! Financing, leasing or hire purchase possible. This is a non-binding offer. Subject to prior sale, errors and changes. Technical information: Number of cylinders: 6 Engine displacement: 6,871 cc GVW: 18,000 kg Gbodpjzbbqrsfx Ahmsn Axle configuration: Brakes: Drum brakes Front axle: Tyre size: 385/65-22.5; Steered; Suspension: leaf suspension Rear axle: Tyre size: 315/80-22.5; Differential lock; Suspension: air suspension Functionality Crane: Palfinger PK 14501 K SLD...

Stanje: novo, največja dovoljena obremenitev: 14.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, Dimensions and Weights Reference Length (external): approx. 7,055 mm Overall Width: approx. 2,500 mm Loaded Ride Height: approx. 1,285 mm Roller Track Length: approx. 6,890 mm Wheelbase: 5,240 mm Total Unladen Weight: approx. 3,400 kg Gross Vehicle Weight Rating: approx. 18,000 kg Payload: approx. 14,600 kg Suitable for containers 5,000 to 7,000 mm in length as per DIN 30722. Chassis Chassis construction made from welded I-beams in QSTE steel 4 pneumatically operated container locks and chassis slider locking system. Closed side underrun protection according to RL 89/297/EEC (item 2) Spare wheel holder in basket design for 2 spare wheels, incl. fastening kit for 1 wheel Turntable Turntable 1300 FM with ball race ring 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN towing eye, internal Ø = 40 mm, external Ø = 110 mm, thickness: 30 mm Axles 2 x 9 t axles for 22.5" disc brakes, manufacturer at supplier’s choice Brake disc diameter approx. 430 mm Wheel mounting with central alignment according to DIN 74 361 part 3 Brake System Pneumatic brake system according to EU guidelines with Duomatic coupling head Conventional air suspension, EBS type 4S/3M, electronic braking system with ROLL Stability, twin-diaphragm spring actuators on rear axle, release valve for separate release of spring-loaded brake Lighting System 24V full LED lighting system as per RL 76/756/EEC with multi-chamber lights and license plate illumination integrated in the lamp panel, manufacturer at supplier’s choice 1 x 15-pin plug connection 6 pcs LED side marker lamps with indicator 2 pcs white LED clearance lights front 2 pcs LED tracking lights rear, mounted separately 1 pc LED reversing spotlight Wheels/Tyres Regional transport tyres 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120 Wheel nuts unpainted Incl. tyre pressure monitoring Underrun Protection Gsdpfxovzdw De Ahmobn Aluminum underrun protection Two vertical delta bumpers protect rear during loading and unloading Accessories 4 pcs plastic half-shell mudguards front and rear, single wheel mudguards 4 pcs antispray mud flaps, neutral 1 pc lockable plastic toolbox 1 pc wheel chock with holder 1 pc license plate holder 1 pc A-sign for transport of waste materials 1 pc hanging net box 2 pcs container guide rails Paintwork Chassis color: MB 7350 Novagrau Slider frame: MB 7350 Novagrau Wheel hubs color: black KTL Rim color: RAL 9006 silver Rear contour marking: red Side contour marking: white Closed SSE: RAL 7001 silver-grey Rear closure/lamp panels: RAL 7001 silver-grey Underrun protection: aluminum anodized (silver) Locking hooks, container guide rails: yellow Documentation Commissioning and brake test report Operating manual Axle manufacturer’s maintenance manual DEKRA expert report Closed side underrun protection Hanging net box, galvanized All information without guarantee. Subject to errors and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 29.947 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2023, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.560 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, Strong Light Sliding Curtain Semi-Trailer Coupling height: 1145 mm Side loading height with lifting roof and internal height (2700 / 2610 mm) Side loading height without lifting roof and internal height (2700 / 2560 mm) Neck height: 120 mm Total length: 13,830 mm Platform internal length: 13,620 mm Total width: 2,550 mm Platform internal width: 2,480 mm Internal width between stanchions: 2,480 mm Internal width between longitudinal beams (without lifting roof): 2,480 mm Internal width between longitudinal beams (with lifting roof): 2,430 mm Axle spacing: 1,310 mm Distance king pin to 1st axle: 6,390 mm Permissible total technical weight: 42,000 kg Permissible axle load: 9,000 kg Permissible fifth wheel load: 15,000 kg Accuracy +/- 4% nd External height: 4,000 mm Unladen weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal beams with recessed fifth wheel plate section, welded construction, weight-optimized using high-strength S700 steel Air suspension Side underrun protection made of aluminium profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic board, load capacity 7.5 t + steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, each with 2 t capacity Rubber rear bumpers Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9,000 kg 22.5 ECO PLUS 3 clamps BPW ET=120 1st axle: lift axle Fifth wheel height: 1,145 mm Landing Legs SAF Hercules 2-speed landing gear, full load Mudguards PVC mudguards – one shell each: 2 front, 2 rear Rims 6x aluminium rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres, size 385/65 R22.5, manufacturer of choice Other Chassis Equipment Warning sign attached to rear underrun protection Bozamet 32 pallet box Two chocks with holders Body Internal height: 2,700 mm Side boards: 4 rows 1st row aluminium side boards H=100 mm, 8 pcs Lifting roof (0, +50) Side curtains with 18 tensioners, curtain weight 900 g/m² Aluminium front wall Front wall impact protection (plywood) H=1,500 mm 2nd row aluminium side boards H=100 mm, 8 pcs 3rd row aluminium side boards H=100 mm, 8 pcs 4th row aluminium side boards H=100 mm, 8 pcs Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, openable from both sides, EDSCHA HYBRID Rear wall as aluminium double-wing door Braking system/Pneumatics Aluminium air tank Braking system (Knorr, Wabco, Haldex) – manufacturer of choice RTR automatic self-levelling (standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted RAL 3002 (Carmine Red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Godpew N Ua Nefx Ahmebn Other Paintwork 2-sided paint (powder coating) on front wall, doors, corner stanchions Additional paintwork – RAL 3002 (Carmine Red) Electrics 2x 7-pin + 1x 15-pin with EBS connection, without connecting cables to tractor Lighting Hella LED EASYCONN Markings Partial contour markings with Wielton logo Partial side contour marking white Partial rear contour marking red Wielton warning stickers Signs in German Certificates/Homologation XL Certificate Beverage Certificate All information subject to change. Errors and prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 14.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, Dimensions and Weights Reference length (external): approx. 7,055 mm Overall width: approx. 2,500 mm Loaded travel height: approx. 1,285 mm Roller conveyor length: approx. 6,890 mm Gsdpjvzdwwjfx Ahmjbn Wheelbase: 5,240 mm Unladen weight (complete): approx. 3,400 kg Permissible total weight: approx. 18,000 kg Payload: approx. 14,600 kg Suitable for containers from 5,000 to 7,000 mm length according to DIN 30722. Chassis Chassis constructed from welded I-beams in QSTE steel. 4 pneumatically operated container locks and sliding carriage lock. Closed side guard in accordance with RL 89/297/EEC (Item 2) Spare wheel carrier in basket design for 2 spare wheels incl. fastening kit for 1 wheel Turntable Turntable 1300 FM including ball bearing slewing ring 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (draw spring with turnbuckle) Drawbar with DIN towing eye, internal D=40mm, external D=110mm, thickness 30mm. Axles 2 x 9 t axles for 22.5" disc brakes, manufacturer as per buyer’s choice. Brake disc diameter approx. 430 mm, Wheel fastening by hub-centric mounting according to DIN 74 361 part 3. Braking System Compressed air braking system according to EU directive with Duomatik coupling head Conventional air suspension, EBS type 4S/3M, electronic braking system with ROLL stability, dual-diaphragm spring brake actuator on the rear axle, release valve for separate release of the spring parking brake. Lighting System 24 volt full LED lighting according to RL 76/756/EEC with multi-chamber lamps and integrated license plate light in the lamp panel, manufacturer as per buyer’s choice. 1 x 15-pin plug connection 6 LED side marker reflectors with indicator function 2 white LED position lights at the front 2 rear LED lane-keeping lights fitted separately 1 LED reverse spotlight Wheels/Tyres Regional transport tyres, 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset ET 120, Unpainted wheel nuts. Incl. tyre pressure monitoring system Underrun Protection Underrun protection made of aluminium. Two vertical Delta impact guard profiles protect the rear during loading and unloading. Accessories 4 plastic mudguards, semi-shell design, front/rear, single-wheel mudguards 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-sign for waste transport 1 hanging mesh box 2 container guides Paintwork Chassis colour: MB 7350 Novagrau Sliding carriage: MB 7350 Novagrau Hub colour: black, KTL-coated Rim colour: RAL 9006 Silver Rear contour marking: red Side contour marking: white Closed SSE: RAL 7001 Silver Grey Rear end/lamp panels: RAL 7001 Silver Grey Underrun protection: Aluminium anodised (silver) Locking hooks, container guides: yellow Documentation Commissioning and brake test protocol Operating instructions Axle manufacturer maintenance instructions DEKRA certificate Closed side guard Hanging, galvanised mesh box All information without guarantee. Subject to errors and prior sale.