Krog Sklada Léger nakup rabljenega (840)

Stanje: novo, Condition: New Delivery time: approx. 3-6 weeks from order Country of origin: Turkey Price: €11,000 Leasing rate: €211.2 Load capacity: 1,000 kg Rated load centre: 150 mm Rated eccentricity: 150 mm Rated tilting moment: 360 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.55 kW Tilting motor: 0.75 kW Rotational speed: 0.1 - 3 rpm Tilting time: 60 s Table diameter: 1,200 mm T-slots: M20 x 6 mm Height of rotational axis (horizontal position): 1,000 mm Bdedpsyq St Aofx Ag Eod The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for turning and tilting operations. Positioners consist of a motor, gearbox, table tilting system, steel gears, and control unit, and are structurally optimally protected. For heavy workpieces, the positioners are anchored to the floor. Tables feature radial T-slots to enable quick clamping of workpieces. Tilting and rotation are achieved via steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Connection for signal to welding machine Touch panel with the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Pneumatic centering device

Stanje: novo, Condition: new Delivery time: approx. 3–6 weeks from order Country of origin: Turkey Price: €7,730 Leasing rate: €149.19 Load capacity: 500 kg Rated load center: 150 mm Rated eccentricity: 150 mm Bodsyq Stvspfx Ag Esdd Rated tilting moment: 360 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.37 kW Tilting motor: 0.37 kW Rotation speed: 0.1 – 3 rpm Tilting time: 45 s Table diameter: 800 mm T-slots: M20 x 6 mm Height of rotation center (horizontal): 640 mm The positioners are available in standard sizes for load capacities from 150 kg up to 3,000 kg. The frame is designed for optimal turning and tilting operations. Positioners consist of a motor, gearbox, table tilting system, steel gears, and controls, and are structurally optimally protected. For heavy workpieces, the positioners are bolted to the floor. The tables are equipped with radial T-slots for quick clamping of workpieces. Tilting and rotation are achieved via steel gears. For safety, the positioner is equipped with a reduction gearbox that holds the table in the desired position. Foot pedal Connection for welding machine signal Touch panel for the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Pneumatic centering device

Stanje: rabljeno, Kovaško nakovalo z okroglim in pravokotnim rogom Nakovala severnonemške oblike Širina delovne površine: 130 mm Dolžina delovne površine: 630 mm (s koničastim rogom) Dolžina okroglega roga: pribl. 200 mm Dolžina koničastega roga: pribl. 220 mm Skupna dolžina: 830 mm Višina: 340 mm Osnova s prednakovalom: 430 x 320 mm Bsdpfxey Ehyce Ag Esdd - Kaljeno litino iz jekla - Kvadratna odprtina pribl. 28 mm za orodje za nakovalo - Okrogla odprtina Ø pribl. 23 mm Dimenzije (D x Š x V): 830 x 320 x 340 mm Zelo jasen zvok, dobra kakovost

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg Bodpfx Aoypbqueg Esdd 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Bdjdpfxsypbqno Ag Esd The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Bdodpfx Ageypbqhe Eed Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Bedpeypbqbefx Ag Eodd Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Bjdpoypbp Rofx Ag Esdd Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Bsdpfoypbp Dsx Ag Eodd Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, 1 x Damak konična zaokroževalka za kose od 100g do 600g. Bdjdpfx Aey Aidkjg Eod Model - DM CR 2000. Serijska številka - DM2100060. Leto izdelave - 2021. Kapaciteta - 1200 do 2400 kosov/uro. Električne zahteve - 415 V / 50 Hz / 3 faze.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, skupna masa: 355 kg, skupna dolžina: 2.000 mm, skupna širina: 1.300 mm, skupna višina: 1.800 mm, AVIKO 60100 G3 DRY ADVANCED zaznava napake na jeklenih kroglicah s premeri od 60 do 100 mm. Sistem lahko uporabniki nadzorujejo preko PC/PLC in njegovega intuitivnega HMI, z dostopom do statistike programske opreme, protokolov, zgodovine sortiranja, video navodil in neposredne povezave s programsko opremo za nadzor stroja Precision Viewer. Vsi glavni gibljivi elementi so poganjani s stisnjenim zrakom ali električnimi motorji. Napredni model je opremljen z naprednimi vrtinčnimi sondami in vključuje instrument eddyvisor C za natančno zaznavanje razpok. Za učinkovito delovanje sta nalagalnik in izhodno držalo vključena kot standardna oprema. Za več podrobnosti obiščite našo spletno stran. Bedpfxoy H Dmbe Ag Eedd

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), I am selling a stacker system SCM MAHROS PONTE C/S, year of manufacture 2010. Bdedpfewyf Utex Ag Ejd Stacker system with single-sided guidance. Discharge also suitable for pallets. Gripper head with rubber shoe system, parallel movement. Vacuum system (with pump). Automatic loading. Infeed table with motorized roller conveyor system. Outfeed table at floor level with lifting mechanism and motorized roller conveyor system. Front outfeed table with roller conveyor system. Outfeed loading roller station for stacked material. Available immediately. Ready for operation.

Stanje: rabljeno, Okrogla pritrdilna plošča s T-utori Bdedpfsv Ed Svjx Ag Esd Poravnalna plošča in pritrdilna miza – jeklena plošča z rezkanimi T-utori Premer Ø 1500 mm Središčna centrirna luknja Ø 80 mm Debelina plošče 54 mm Delovna višina 970 mm - 6 kosov T-utov, 18 mm - 3 kosov navojnih lukenj M20, premer razporeditve lukenj 1000 mm - Jeklen podstavek brez centralne luknje Teža 785 kg dobro stanje

Stanje: rabljeno, Rotary table 400 mm Bedjvpvh Repfx Ag Eedd

Stanje: novo, Leto izdelave: 2026, - Capacity 700 x 4 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical rolling - Swiveling top roller - Braked motor Bsdpoh Rbvgjfx Ag Ejdd - Foot switch - Emergency stop - Documentation - 400V

Stanje: novo, Leto izdelave: 2026, število valjev: 3, - Capacity: 700 x 4 mm - Conical rolling - Removable top roller - Braked motor - Foot control - Emergency stop - Documentation Bsdpfxsh Rayto Ag Ejdd - 400V

Leto izdelave: 2024, stanje: novo, The ball mill is ideally suited for the comminution of hard, brittle, and hard-tough materials such as ceramics, clinker, construction materials, glass, minerals, ores, silicon, slag, and many more. Bsdpfegchbmsx Ag Eedd

Leto izdelave: 2024, stanje: novo, The ball mill is ideally suited for the comminution of hard, brittle, and tough materials such as catalysts, ceramics, clinker, construction materials, glass, minerals, ores, silicon, slags, and many more. Bdedpfxoku A H Ue Ag Ejd

Stanje: rabljeno, Table diameter: 500 mm Table load capacity: 420 kg Table height: 185 mm Center height: 315 mm Center bore: MK 5 mm Indexing: 15° Weight: 275 kg Required space: approx. 600 x 850 x 200 mm High-quality rotary table for horizontal and vertical use Bjdpfx Agjr Htvne Eodd - Factory No.: P56030 - Rotary table can be set up vertically or horizontally - Rotary table with selectable 15° indexing or continuously rotatable 360° - Handwheel with scale and vernier - Centering taper MK 5 - Crank with indexing pin - 3x dividing plate

Stanje: dober (rabljeno), Slip roll 1000 x 1 mm Working width: 1055 mm Roll diameter: 50 mm Required space: Width: 1200 mm Bjdpfxeud Spho Ag Eedd Height: 1230 mm Depth: 600 mm Weight: 110 kg

Stanje: dober (rabljeno), Sheet metal bending roll Roll bending machine 1000 x 1.5 mm Working width: 1040 mm Roller diameter: 55 mm Asymmetric roll arrangement Bdedpfx Ajud Spnjg Eod Width: 1500 mm Depth: 930 mm Height: 1280 mm Weight: 200 kg (without pallet)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 18.972 h, številka stroja/vozila: 363/11, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 150 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 5 mm, TEHNIČNE PODROBNOSTI Maks. debelina pločevine: 5 mm Maks. delovna širina: 1.500 mm Premer zgornjega valja: 130 mm Premer spodnjih valjev: 150 mm PODROBNOSTI O STROJU Krmiljenje: CNC Pogon: hidravlični Število valjev: 4 Število pogonskih valjev: 4 Dimenzije in teža Dimenzije (D x Š x V): 3.700 x 1.200 x 1.200 mm Transportna teža: 2.000 kg Transportni paketi: 2 Bdedpey Hhwqofx Ag Esd Obratovalne ure: 18.972 h OPREMA Konusno upogibanje CE oznaka

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 020156 Delivery time: Prompt, subject to prior sale Country of origin: Turkey Price: €6,720 Leasing rate: €129.70 In stock: 1 unit Load capacity: 250 kg Weight: 205 kg Rated center of gravity: 150 mm Rated eccentricity: 150 mm Table rotation: 360° Tilting moment (rated): 360 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.37 kW Tilting motor: 0.25 kW Rotation speed: 0.1 – 3 rpm Tilting time: 30 s Table diameter: 600 mm T-slots: M16x6 mm Height of rotational axis (horizontal): 550 mm Length: 1,000 mm Width: 700 mm Height: 1,700 mm The positioners are available in standard sizes for load capacities ranging from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting processes. The positioners are constructed with motor, gearbox, table tilting system, steel gears, and control unit, offering maximum structural protection. For heavy workpieces, the positioners are fixed to the floor. The tables are equipped with radial T-slots for quick clamping of workpieces. Tilting and rotation are performed via steel gears. For safety, the positioner features a reduction gearbox to lock the table in the desired position. Foot pedal included. Connection for welding machine signal. Touch panel with the following functions: - Rotation speed - Operation mode (manual, segment cycle, circular) Bjdpfjx Urqkex Ag Ejdd INCLUDING THE FOLLOWING OPTION: Pneumatic centering device

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, obratovalne ure: 2.177 h, Funkcionalnost: popolnoma funkcionalen, stroj za izdelavo valjastih hlodov s premerom do 400 mm in dolžino do 10 m. Bdsdozcgtbepfx Ag Esd

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina): 2150x1300x1780 mm Teža: 1000 kg Skupna priključna moč: 5,5 kW CNC oscilirajoči stroj za zaokroževanje čepov CHAIRMAX - CNC krmiljenje z uporabniku prijaznim zaslonom na dotik - maks. dimenzije obdelovanca (vodoravno): 140 x 80 mm - maks. širina čepa navpično: 80 mm - maks. premer čepa: 80 mm - maks. globina čepa: 70 mm - število vrtljajev: 0 – 8.500 1/min - motor vretena 3,0 kW - premer vretena 30 mm - napetost 400 V, 50 Hz - servo motor X-os: 1,0 kW - servo motor Y-os: 1,0 kW - naklon mize: navzgor 0–15° navzdol 0–30° vstran 0–20° Bodpfxovz Egyj Ag Eodd - 2 pnevmatski vpenjalniki obdelovancev - avtomatska črpalka za mazanje - CE skladnost - delovni tlak: 6 bar - priključek za odsesavanje: 120 mm - Dimenzije (D=2150, Š=1300, V=1780 mm) - Teža: 1000 kg