Konzolni Roko Pasu Dolgo Dobro Police Uporabne Globine 800 Mm nakup rabljenega (114.402)

Stanje: dober (rabljeno), Technical specifications for the racking connector: Racking system: Nedcon Type: NS Bdedeir U N Sepfx Afqjk Scope of delivery includes: 01x racking connector, used Material color: cream white Total length: approx. 400 mm End plates: approx. 140 x 95 x 2.5 mm Hole diameter: approx. 12 mm Profile dimensions: approx. 70 x 70 mm Weight per piece: approx. 2.78 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Bedpfxsmhhf So Afqsdk - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Shelf connector, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm For a rack spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Bjdpfxji Euu Re Afqsdk Weight: 1.75 kg each

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Bdedpfxomhhyas Afqok We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: zelo dobro (rabljeno), Included in the scope of delivery: 02x Workbench Stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 800 mm Including cross and diagonal braces, base plates. The stands are pre-assembled (bolted lattice construction). 04x Workbench Beams, used Bdsdpji Ewqrsfx Afqok Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Clear width: 2,400 mm 08x Locking Pins, new Design: fully galvanized 01x Chipboard Panel grade II, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 800 mm Surface: possibly coated (possibly two-piece) 01x Chipboard Panel grade II, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 800 mm Surface: possibly coated (possibly two-piece) 16x Self-drilling Screws, new Design: galvanized Dimensions: 6.3 x 70 mm Images are for illustrative purposes only. Material color may vary. Chipboard panels may be either coated or uncoated. - Workbenches are picked unassembled. - Workbench stands are pre-assembled. - Usual production time is approx. 5 working days.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) Bdodpfx Afjmhhx Ioqok - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: zelo dobro (rabljeno), Included in the scope of delivery: Bodpfx Aji Hn Uisfqsdk 01x Shelf connector, used Material color: Sendzimir galvanized L-profile dimension: 85 x 35 x 2.00 mm Total length: approx. 270 mm Clear width: approx. 198 mm Rack spacing: approx. 200 mm Weight: approx. 0.430 kg / pc. 04x Hexagon bolts, M8 x 20 8.8 04x Hexagon nuts, M8 04x Washers, M8 General information about the item: This item is only offered for collection. Any transport or shipment beyond this is subject to additional costs, which can be requested from us separately depending on the place of delivery and scope of delivery.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level. Bdedpfxjmidyfo Afqok

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Rack connector, used Bdjdpfsk Iuhfsx Afqek Material color: blue Manufacturer: Feralco For rack spacing: approx. 200 mm Overall length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm End plate: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pieces per side) Weight: approx. 0.41 kg | each

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Bdjdpfx Aemhhl Hjfqjk Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: zelo dobro (rabljeno), Technical data for pallet rack upright: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Bedek Uuv Sjpfx Afqodk Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss design) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for collection only. Should transport or shipping of this item be desired, additional costs will apply. These can be requested separately depending on the delivery location and scope of supply.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments Bodpfx Afemkixwoqjdk - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: dober (rabljeno), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Scope of delivery includes: 01x pallet racking beam, used Colour: yellow Beam type: B120ZC Box profile: 120x50 mm Connector: 3 hooks Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg with evenly distributed load 02x locking pins, new Design: fully galvanized For securing the cross beams against accidental lifting out Bodpfxjlwuw Uo Afqjdk Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipment is required beyond this, additional costs will apply, which can be requested from us depending on the delivery location and the scope of delivery.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Bdsdpfxeh Ek Das Afqsk Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: dober (rabljeno), Technical data for the rack connector: Shelving system: Stow Type: Pal Rack NS Bdjdpfomqldkjx Afqok Scope of delivery: 01x Rack connector, used for racking distance: 360 mm Total length: 360 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material finish: Sendzimir galvanized Drill hole diameter: 11 mm Weight: 0.480 kg | each 02x Bolts M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for collection only. Shipment or delivery beyond this is subject to additional costs, which can be requested separately according to place of delivery or scope of supply.

Stanje: dober (rabljeno), Technical data of the rack connector: Racking system: SLP Bodpfjipugrsx Afqodk Included in delivery: 01x rack connector, used Material colour: blue Total length: approx. 200 mm End plates: approx. 95 x 41 mm L-profile: approx. 31 x 31 mm

Stanje: dober (rabljeno), Technical Data for the Shelving System: Rack System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of Rack Rows: 01 pc. Rack Length: 1,056 mm Number of Bays per Row: 01 pc. Scope of Delivery: 02x Upright Frames, used Material Finish: Sendzimir galvanized Frame Profile Dimensions: 31 x 60 mm Including bracing and base plates The uprights are pre-assembled Height: 2,494 mm depth: 400 mm 02x Shelves, used Designation: ZB 4423 V Material Finish: Sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight | per unit: approx. 4.65 kg Max. load per shelf: 200 kg with evenly distributed load 01x Base Cover Panel, used for base length: 994 mm Material Finish: Sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | per unit: approx. 0.51 kg 05x Cross Beams, grade II (new) Material Finish: Sendzimir galvanized Bodpfsvmxuhex Afqedk Z-profile: 60 x 40 x 12 mm Clear span: approx. 994 mm Perforation: approx. 53 mm Bracket: 3 HK (hooks) Weight | per unit: approx. 1.70 kg 15x Shelf Dividers, grade II (new) Material Finish: galvanized Type: APH 340 Overall length: approx. 340 mm Usable length: approx. 315 mm Overall width: approx. 100 mm Tube Ø: approx. 12 mm Weight / per unit: approx. 0.170 kg 01x Cross Brace, used Designation: KV31013 Material Finish: Sendzimir galvanized Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only offered for collection. Any transportation or shipping of this item will incur additional costs, which depend on delivery location and scope, and can be requested from us separately.

Stanje: dober (rabljeno), Technical Data for Pallet Racking Frame: Racking System: Nedcon Type: NS Bdodov N E H Aepfx Afqok Included in delivery: 01x pallet racking frame, used Color: cream white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustable pitch: 50|50 mm including horizontal and diagonal bracing, base plates The frames are pre-assembled (bolted latticework) Frame height: 9,000 mm Frame depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required beyond this, additional costs will apply, which can be requested from us depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Shelf connector, used Racking system: Nedcon Type: NS Suitable for frame profile width: 100 mm For rack spacing: 300 mm Profile dimensions: U 65 x 40 mm Weight: 0.83 kg | each Bdodsi Enyuspfx Afqek

Stanje: zelo dobro (rabljeno), Technical Data for Order Picking Rack: Rack System: Dexion Type: HI280 Technical Data for Installation: Number of rack rows: 01 pc. Rack length: approx. 1,340 mm Number of bays / rack row: 01 pc. at 1,290 mm Number of levels incl. ground level: 06 pcs. Note: The advantage of a packing table or an order picking rack is that all the required tools and accessories necessary for assembling the product are always within easy reach. Scope of delivery includes: 02x shelf uprights, used Material color: Sendzimir galvanized Frame profile dimension: 50 x 55 mm Adjustable pitch: 25 mm incl. horizontal and diagonal braces Weight / pc.: approx. 5.50 kg Uprights are pre-assembled 1,200 mm high 610 mm deep 06x shelf panels, used Material color: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pc.: approx. 4.37 kg Max. load per shelf with evenly distributed weight: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 06x shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight / pc.: approx. 0.84 kg Material color: Sendzimir galvanized 48x picking bins, used Manufacturer: SSI Schäfer Box designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight / pc.: approx. 0.785 kg 01x load sign with specifications for bay and shelf load, manufacturer, and order number Bdedpen Smvhjfx Afqek Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damages, corrosion or similar defects may be present. General information about the item: This item is offered for collection only. If additional transport or shipping of this item is required, extra costs will be incurred, which can be requested from us depending on the delivery location and scope.

Stanje: dober (rabljeno), Technical Specifications for Pallet Rack Beam: Racking system: Stow Type: Pal Rack OP Included in the scope of delivery: 01x Pallet rack beam, used Colour: blue Box section: 110 x 50 mm Clear span: 1,300 mm Maximum load per beam pair: 2,000 kg (with evenly distributed load) 02x Safety pins, used Version: fully galvanized Bjdpfjhlhfgjx Afqodk For securing the beams against unintentional lifting General information about the item: This item is only available for collection. Delivery or shipping is subject to additional costs, which can be provided upon request depending on delivery location and order scope.

Stanje: dober (rabljeno), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for assembly: Number of shelf rows: 01 pc. Shelf length: 1,056 mm Number of bays per shelf row: 01 pc. Scope of delivery includes: 02x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm including bracing and base plates Uprights are pre-assembled Height: 2,278 mm Depth: 400 mm 09x Shelves, used Model: ZB 4423 V Material finish: Sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight per piece: approx. 4.65 kg Maximum load per shelf: 200 kg with evenly distributed load 27x Reusable containers, used Manufacturer: BITO Type: MBD 43171 Color: Dove blue Material: Polypropylene External dimensions: 410 x 300 x 190 mm (LxWxH) Volume: 16 liters Load capacity: 14 kg Weight per piece: approx. 1.30 kg Including 2-piece folding lid 01x Cross bracing, used Model: KV31013 Material finish: Sendzimir galvanized Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Bdodpfx Ajv Avuqefqjk Mr. Falk Deutsch General information about the item: This item is offered for pickup only. If transport or shipment of this item is required, additional costs will apply. These costs can be provided separately upon request, depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for setup: Number of shelving rows: 01 pcs Shelf length: 1,056 mm Number of bays per row: 01 pcs Included in delivery: 02x shelf uprights, used Material finish: Sendzimir galvanized Bodpfx Afov Avw Ejqjdk Frame profile dimensions: 31 x 60 mm incl. cross braces and base plates The uprights are pre-assembled 2,278 mm high 300 mm deep 11x shelf panels, used Material finish: Sendzimir galvanized Dimensions: 994 x 300 x 30 mm Weight | per unit: approx. 3.18 kg 44x returnable containers, used Manufacturer: BITO Type: MBD 43171 Color: dove blue Material: polypropylene External dimensions: approx. 310 x 200 x 170 mm (LxWxH) Volume: 5 liters Payload: 15 kg Weight | per unit: approx. 0.77 kg incl. 2-part folding lid 01x diagonal brace, used Designation: KV31013 Material finish: Sendzimir galvanized Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for self-collection only. Additional transport or shipping services for this item will incur extra costs, which can be quoted separately depending on the delivery location and scope of supply.

Stanje: novo, Longitudinal Cut Saw LAS. Depending on customer requirements and specifications, we manufacture longitudinal cut saws with the appropriate saw blade diameters. The cutting range is determined individually in direct collaboration with the customer to ensure fast and efficient processing. Optionally, we offer the possibility to combine the machine with a matching length stop. Bdsdpfx Afed A Tq Deqok Mitre devices, coolant units, and suitable extraction technology are available on request.

Stanje: rabljeno, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, dual turntable steering, heavy-duty trailer - Handover: as-is condition as inspected - Note: Please observe the condition of wheels/platform - Heavy-duty transport trolley: Industrial trailer with single-axle turntable steering - Platform: 1610/800/H500 mm Bdsdpfsub D Spox Afqsk - Load capacity: 1.5 t - Tyres: Ø 360 x 90 mm solid rubber - Overall dimensions: 2850/800/H500 mm - Weight: 195 kg