Kombinirka 5 Operacij nakup rabljenega (21.725)

Stanje: rabljeno, skupna masa: 219.000 kg, največja dovoljena obremenitev: 175.620 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Hnodpfxjxcdgqs Ah Dju Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, Ponujamo namizni peskalni stroj - Škoda TMSO 2.4/5. Stroj ima dve delovni vrtljivi mizi. Velikost vsake mize je premer 1000 mm. Največja velikost obdelovanca na eno mizo je premer 1000 mm, višina 500 mm. Turbina premera 320 mm. Moč turbine: 11 kW. Filtracijske enote: 2 enoti, poraba energije vsake je 2200 W. Skupna priključna moč stroja: 23 kW. Hnedpfx Asxnwz Sjh Deu

Leto izdelave: 2020, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Nagyon jó állapotban, bontatlan, sosem használt. Kérjük, tekintse meg további hirdetéseinket is! Hsdpfewiqggex Ah Dsnu

Stanje: dober (rabljeno), Grinding area 800x500x480 mm Table size 800x400 mm Grinding wheel diameter 400 mm Hnsdpfx Aed Nmx Noh Dou Magnetic chuck 800x400 mm MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 2021, 1 rabljeni motorizirani stroj za valjanje pločevine Proizvajalec: Akyapak Tip: ASM 140-12/5 Leto izdelave: 2021 Tehnični podatki: Širina pločevine: 1250 mm Debelina pločevine: 5,5 mm Predgibanje: 5,0 mm Dolžina valjev: 1280 mm Hnsdpfx Asxnpwxoh Dou Najmanjši premer: 210 mm Premer zgornjega valja: 140 mm Teža: 1365 kg Dimenzije (D-Š-V): 2.020 x 900 x 1.200 mm Standardna oprema: – Centralni valji so gnani z elektromotorjem, planetnim reduktorjem in zobniškim pogonom – Zgornji valj, ki se odpira bočno – Glavni motor z zavoro – Naprava za stožčasto krivljenje – Mobilna krmilna omara in nožni pedal – CE oznaka/izjava o skladnosti

Leto izdelave: 1969, Stanje: rabljeno, Swivel bending machine Albert Stahl Type ABK 400 /5 Working length: 2530 mm Hsdpfxoh Rkh Do Ah Denu Sheet thickness: 5 mm

Stanje: rabljeno, skupna masa: 219.000 kg, največja dovoljena obremenitev: 175.620 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Hedpfexcdfgox Ah Donu Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, Offer consisting of: Ring eye conversion kit without leaf springs for bolster heads 48/5 Hnodpfx Aou Srfneh Dju Upon request, we can organize the following for you: Packaging, loading, transport (by ship or airplane) including customs clearance Obtaining a leasing offer

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Profilirni stroj za parket Celaschi Team 60/5 5+5 motorjev Minimalna delovna širina 78 mm Hnsdpfx Ahexf Ttfo Deu T&G profil Orodja vključena Dejanski transportni trak

Stanje: rabljeno, prevoženi kilometri: 415.120 km, moč: 375 kW (509,86 KM), prva registracija: 07/2021, skupna masa: 18.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 2 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, parkirni grelec, * MAN TGX XXL 18.510 4x2 Hnedpfsuatdxjx Ah Dju * Automatic transmission * Retarder * Mileage: 338,716 - 480,495 km * Year of manufacture: 07/2021 * Completely newly serviced * Vehicles in faultless condition * Previously covered by MAN service contract * 5 units available * 415,120 km * 433,633 km * 436,952 km * 441,265 km * 496,466 km * Price on request * All information subject to change and without guarantee MAN TGX 18.510 tractor unit, white, leaf/air suspension, automatic transmission, 4x2, diesel, Euro 6, green emissions sticker, year of manufacture (07/2021) Equipment: Aero package, EfficientLine package, electronic braking system (EBS), emergency braking assistant, cruise control: EfficientCruise 3, lane departure warning system, LED headlights, headlight cleaning system, headlight beam control, fog lights, tinted windows: tinted door glass, laminated safety glass windscreen (tinted), cornering lights: LED, MAN Media Truck system, fifth wheel: 185 mm height, JOST JSK 42 K0 2 inch, electric glass roof hatch with blackout and mosquito net, roof spoiler: 600 mm, external mirrors electrically adjustable and heated, rear differential lock, twin tires, wheelbase: 3,600 mm

Stanje: rabljeno, Leto izdelave: 1969, Rabljeni stroj Hedpfx Ahoxavtqs Dsnu Leto izdelave: 1969 Deluje brezhibno Največja delovna širina: 170 mm Največja delovna višina: 130 mm 1. vreteno: spodaj 2. vreteno: desno 3. vreteno: levo 4. vreteno: desno 5. vreteno: zgoraj Razpoložljivost: kratkoročno Skladišče: Röllbach

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 1.700 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MP7/5/P, potovalna razdalja osi X: 730 mm, pomik osi Y: 250 mm, pomik po osi Z: 400 mm, dolžina podajanja os X: 585 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 400 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, hitrost vretena (min.): 1 obr/min, največja hitrost vretena: 42.000 obr/min, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 80 m/min, hitri pomik na osi Z: 80 m/min, vrsta vhodnega toka: trifazni, obremenitev mize: 60 kg, teža obdelovanca (maks.): 60 kg, skupna masa: 8.000 kg, MP7 5-axis with integrated pallet changer 5-axis with rotary-swivel axis Travel range X/Y/Z: 585x250x400 mm B-axis travel: +/- 105 degrees C-axis travel: unlimited Workpiece weight: 60 kg Distance from machine table to spindle nose: 450 mm Machine dimensions (W x D x H): 2845x2370x3000 mm Machine weight: 8000 kg Spindle speed: 42,000 rpm Equipment: Heidenhain TNC640 control Main spindle HVC140 HSK-E40 with rotary union for internal media supply Hjdpfxjxlctbs Ah Dsnu - Maximum speed: 42,000 rpm - Milling power S1/S6: 10 kW/13 kW - For internal coolant supply (air and emulsion) Oil mist extraction for oil/emulsion Dust extraction L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Handheld control panel with handwheel and enabling switch Renishaw OMP400 probe system Aerosol dry lubrication (ADL) - Precision external and through-tool media application Table chuck EROWA PowerChuck P for 5-axis operation Blumlaser LC50 Media distributor by MHT 90-position tool changer HSK E40 12-month warranty Transport Commissioning on site Training

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna masa: 219.000 kg, največja dovoljena obremenitev: 175.620 kg, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Hnodpfxoxcdfao Ah Dju Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, Leto izdelave: 2008, skupna dolžina: 7.500 mm, skupna višina: 1.800 mm, skupna širina: 970 mm, Poids : 5 500 kg - Nombre d'unités : 8 - 1er type d’unité : Unité de prémoulage - 2e type d’unité : Unité d’encollage - 3e type d’unité : Unité de coupe en bout - 4e type d’unité : Unité de dégrossissage - 5e type d’unité : Unité de dégrossissage - 6e type d’unité : Unité de raclage radius - 7e type d’unité : Unité de raclage plat - 8e type d’unité : Unité de brossage - Outils inclus : Oui - Année de construction : 2008 - Documentation disponible : Non - Marquage CE : Oui - Numéro de série : - Tension [V] : 400 - Consommation électrique [A] : 43 - Fusible [A] : 50 - Dimensions de transport : 7500mm x 970mm x 1800mm (L x l x h) - Poids de transport [kg] : 5500kg - Nombre de colis de transport : 3 Informations financières TVA : Le prix indiqué est hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout le secteur industriel Hnjdoxakluopfx Ah Dju Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar capacity: 20 mm Spindle speed: 10,000 rpm Power (S2 30 min/S1): 3.7 / 2.2 kW Torque (S2 30 min/S1): 23.6 / 14 Nm SUB SPINDLE Maximum bar capacity: 20 mm Spindle speed: 10,000 rpm Power (S2 30 min/S1): 2.2 / 1.5 kW Torque (S2 30 min/S1): 7.0 / 4.8 Nm WORK AREA Z1 travel: 60 mm Turret 1 X1/Y1 travel: 50 / 325 mm Sub spindle X2 / Z2 travel: 220 / 170 mm Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2: 32/32 m/min Linear axes acceleration: 5 m/s² TURRET 1 TOOL POSITIONS Fixed turning tools: 6 Tools for frontal and secondary operations: 6/3 Driven tools: 2 + 2 Maximum spindle speed: 6,000 rpm Power (S3 40% / S1): 1.3 / 0.8 kW Torque (S3 40% / S1): 2 / 1.3 Nm Power (S3 40% / S1): 1.3 / 0.8 kW Torque (S3 40% / S1): 3.5 / 3 Nm Hedpewifrksfx Ah Denu Y2 SLIDE TOOL POSITIONS Fixed/driven tools for secondary operations: 4/0 Maximum spindle speed: 6,000 rpm Power (S3 40% / S1): 1.2 / 1 kW Torque (S3 40% / S1): 2.5 / 2 Nm

Stanje: rabljeno, prevoženi kilometri: 40.000 km, moč: 125 kW (169,95 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.500 kg, prva registracija: 08/2024, dolžina tovornega prostora: 4.350 mm, širina tovornega prostora: 1.770 mm, višina nakladalnega prostora: 1.950 mm, emisijski razred: Euro 6, barva: srebrn, število sedežev: 3, skupna dolžina: 6.967 mm, skupna širina: 2.020 mm, skupna višina: 2.616 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Internal Vehicle No.: 5822X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide Always over 400 vehicles immediately available at Largest selection – Best price More than 1,000 satisfied customers per year – Top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition 1st owner, German vehicle, non-smoker vehicle Full service history exclusively at Mercedes Benz Next service in 239 days Automatic transmission Body: Maxi panel van Tow bar, increased towing capacity 3,500 kg Reversing camera Exterior mirrors with blind spot assist Cruise control system Regulated air conditioning (Tempmatik) Heated seats Plastic side cladding in the cargo area Lashing rails in the cargo area LED load compartment lighting ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 3-button remote control for central locking * Passenger side airbag * Towbar: ball-head for increased towing capacity – 3.5 tons * 13-pin trailer socket * Electrically folding exterior mirrors * Exterior mirrors with blind spot assist * Single-pole battery cut-off switch * DAB tuner (digital radio) * Roof light in the cargo area with door contact * Grab handle on rear right door pillar * Tachograph controls in the front under headlining * Digital tachograph * Chassis: Stabilization level II * Vehicle without ride height lowering * 250 A alternator * Speed limiter 130 km/h * Cruise control system * Rear doors (opening angle 270 degrees) * Wooden floor in cargo area * Regulated air conditioning (Tempmatik) * LED cargo area light * Cable duct on rear portal * Cable duct on side wall * Metallic paintwork * Cross member with integrated step * Reversing camera * Shoulder-lap airbag (thorax-pelvis sidebag) passenger side * Shoulder-lap airbag (thorax-pelvis sidebag) driver side * Driver cabin seats: double passenger seat * Driver cabin seats: heated driver seat Hnsdexpb Dtepfx Ah Dou * Driver cabin seats: comfort driver seat * Trim in loading/cabin area: high plastic (up to roof) * Trim in loading/cabin area: wheel arch trim (plastic) * Lashing rails in the cargo area – side wall at waist rail * Lashing rails in the cargo area – side wall at roof frame * Reinforced front axle * Heat-insulating glazing (windscreen with top band filter) Standard equipment: 3rd brake light, storage compartment above the windscreen, storage compartment below the dashboard on passenger side, adaptive brake light, driver’s airbag, Hill-Start Assist, Anti-lock Braking System (ABS), Traction Control System (ASR), rear-wheel drive, washer fluid level indicator, both exterior mirrors electrically adjustable and heated, outside temperature display, brake assist, automatic driving light activation, entry handle for sliding door on cargo partition, electronic brake force distribution (EBD), electronic stability program (ESP), driver assistance system: breakdown management, driver assistance system: crosswind assist, electric window lifters (2x), external noise reduction, automatic GTronic transmission (9-speed), body/structure: standard high-roof panel van, keyless start, child lock, communication module (LTE) for digital services, powe

Stanje: novo, KRM ST 30/5, zmogljiv stroj za valjanje iz kategorije okroglih valjavnih strojev in produktne skupine 3-valjnih okroglih valjev, je idealen za okroglo valjanje obdelovancev dolžine do 3000 mm. Ta robusten stroj ima stabilno, zaprto ogrodje in motorizirano nastavljiv zadnji valj, kar omogoča široko uporabo v jeklarstvu in kovinskopredelovalni industriji. Asimetrična postavitev valjev je posebej zasnovana za obdelavo debele pločevine, medtem ko so kaljeni valji iz kakovostnega jekla primerni tudi za nerjaveče jeklo. KRM ST 30/5 nudi tudi ročno in opcijsko motorizirano pomikanje spodnjega valja ter elektromagnetno zavoro za maksimalen nadzor med postopkom upogibanja. Za vprašanja o montaži ali dodatni opremi vam je na voljo naša podpora. Naročite zdaj in odkrijte številne možnosti obdelave pločevine s KNUTH! Hnedpfx Ahjihvtgj Dsu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 2.110 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7846, potovalna razdalja osi X: 455 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 800 kg, skupna višina: 2.600 mm, skupna širina: 2.160 mm, skupna dolžina: 2.600 mm, širina mize: 400 mm, vrsta vhodnega toka: trifazni, tabela razdalje do vretena: 450 mm, dolžina mize: 820 mm, trajanje garancije: 12 meseci, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 5 m/min, hitrost podajanja os Z: 15 m/min, vhodna napetost: 400 V, skupna masa: 2.800 kg, obremenitev mize: 800 kg, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, EDM312MF30 + AWEX100/5 100 pozícií elektród 5 paletových miest 320x320mm Prevádzkové hodiny 2110h Technické údaje: Posuvy: 455x300x300mm Upínací stôl na obrobky: 820x400mm Hnjdpfx Aexlchfeh Deu Rozmery nádoby: 900x520mm Plniaca výška: 300mm Vzdialenosť stôl / držiak elektródy: 150/450mm Hmotnosť obrobku max.: 800kg Dielektrikum max.: 700l Rozmery (ŠxHxV): 2160x2000x2610mm Hmotnosť stroja: 2500kg Pripojenie na sieť: 3/N/PE 400/230 50Hz Príkon: 6,7 KVA Vybavenie: Farba: svetlo sivá Ovládacie rozhranie: MF30 V3.2 Dotykový displej Generátor exogen 60A Priame meranie na všetkých osiach Patrónový filter Integrované chladiace zariadenie CO² hasiaci systém C-os 100/min., zadržiavacia brzda Ručný ovládací panel so súhlasovým tlačidlom Automatické polohovanie klesajúcej nádrže Upínacie skľučovadlo Erowa 12 mesiacov záruka Transport Uvedenie do prevádzky na mieste Školenie

Leto izdelave: 2015, Stanje: dober (rabljeno), Ventilator, puhalo, elektromotor, aksialni ventilator, cevni ventilator -Proizvajalec: FläktWoods, aksialni ventilator tip 31JM/16/4/5/36 S/S 3 S BT4 -Motor: 380-420 V / 1370 obr/min / 100 W -Ventilacijska cev: Ø 315 mm -Krog lukenj: Ø 355 x 10 mm -Zaščita: IP55 -Količina: 1x ventilator na voljo -Cena: na kos -Dimenzije: Ø 395 x 360 mm -Teža: 15 kg/kos Hnjdogx Am Sjpfx Ah Dju

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, številka stroja/vozila: 1793, NOU PORTAL MACARA MOTORIZAT, FABRICAT 2022, marca COMEGE PORTMOT 5000/7/, produs în România cu componente franceze, capacitate de încărcare 5.000 kg, sarcină maximă: 5.000 kg; cadru: 7.000 x 5.250 mm; cursă palan între stâlpi: 6.000 mm; înălțime până la grinda transversală: 4.800 mm; palan cu lanț; deplasare motorizată; greutate proprie fără accesorii: 1.600 kg; 2 roți motorizate fixe; 2 roți pivotante; detectoare de obstacole montate în fiecare colț; stare optică și tehnică excelentă. Mulți producători au deja acest tip de produs, însă acest model se remarcă prin capacitatea de a manipula o sarcină de până la 5 To, controlată prin radio, cu deplasare și rotire în toate direcțiile direct pe sol. Nu necesită căi ferate sau lucrări civile pentru utilizare. Portalul motorizat permite, de asemenea, transferul sarcinilor între ateliere diferite. Siguranța este asigurată de cele 4 detectoare de oprire totală. Portalul poate efectua rotație proprie datorită inversării motoarelor, iar colectorul conectat la sursa electrică permite utilizatorului rotire la 360°. Pentru firmele din România, există posibilitatea achiziției prin leasing. Preț: 29.900 Euro + TVA, FCA: Oradea/România Ne rezervăm dreptul la greșeli, modificări și vânzare intermediară. Vorbim engleză. Wir sprechen Deutsch. Beszélünk magyarul. Nous parlons français. Vorbim româna. Hedpfxoum Hhlj Ah Denu

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 400 t Gap width: 1,100 mm Stroke: 250 mm Stroke rate: 25 - 75 strokes/min Hnedpfx Aevuuknjh Dju Distance table/ram, max. stroke up, adjustment up: 900 mm Table area: 1,100 x 965 mm Ejector force in table: 30 t Ejector stroke in table: 80 mm Ejector force in ram: 3 t Ejector stroke in ram: 60 / 70 mm Ram area: 980 x 800 mm Side frame passage: 800 mm Ram adjustment: 20 mm Drive power: 80.0 + 5.5 kW Weight: 47.0 t Space requirement (W x D x H): 3.5 x 3.3 x 6.0 m Control cabinet weight: 1.4 t Control cabinet dimensions (W x D x H): 4.9 x 0.5 x 2.6 m Multistage cold forging press with articulated drive with steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorized ram adjustment, pneumatic compensation cylinder in the press frame, table ejector (cam controlled, 30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized central lubrication. Can be offered without commissioning, or alternatively complete with new Siemens S7-1500 F control system.

Stanje: dober (rabljeno), Pipe thread tap Hnedpfx Ahjdx Uzhe Deu Brand: Reishauer 5/8 GG 85 mm long

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17037, skupna masa: 350 kg, Temperirna naprava Robamat tehnični podatki: Hnedpfx Aew U Dc Rjh Dsu Napetost: 400V Frekvenca: 50 Hz Tok: 63A 24V DC Maksimalna temperatura: 320°C Idealno za natančno regulacijo temperature v industrijskih procesih in upravljanju strojev. Ta preverjen model omogoča zahtevno regulacijo temperature v proizvodnih okoljih in se izkaže z zanesljivostjo pri zmernih pogojih uporabe. V obsegu dobave je pripadajoča dokumentacija ter, če je na voljo, navodila za uporabo.

Stanje: rabljeno, Leto izdelave: 1977, Pressure 30 t Outreach 110 mm Stroke 50 mm Hnedpjvuugpjfx Ah Dou Strokes per minute 35 - 80 /min Clearance between body walls 170 mm Installation height 230 mm Table surface 410 x 260 mm Table height above floor 790 mm Ram surface 190 mm Ram adjustment 35 mm Drive power 1.0 x 1.1 x 1.8 kW Weight 1.3 t Only approved for use with safety tools or fixed guards in accordance with German accident prevention regulations (UVV) with motor-driven knuckle-joint system, pneumatic friction disc clutch and brake, manual ram adjustment, mechanical ejector in table, fixed table, automatic centralized oil lubrication, foot operation as-is, WITHOUT being put into operation – Video from the seller available prior to disassembly

Stanje: rabljeno, Cooling water pump Hnsdpfxsc Unyds Ah Dju Manufacturer: Grundfos Type: SK 4 -15/5 Speed: 2840 rpm Flow rate: 40 - 80 litres Delivery head: 27 - 18 metres