Knc 8 nakup rabljenega (14.472)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 8.348 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2887, pritisk: 8,5 letvica, moč: 2,276 kW (3,09 KM), obratovalni tlak: 8 letvica, temperatura: 176 °C, skupna višina: 2.950 mm, skupna dolžina: 5.100 mm, nazivna toplotna moč: 2,276 kW (3,09 KM), skupna širina: 2.400 mm, lastna masa: 6.500 kg, Oprema: CE označba, ATTSU RL3000/8 parni generator za prodajo. Parni generator je v zelo dobrem stanju in ima malo obratovalnih ur – zgolj 8348. Generator je bil uporabljen v tovarni vložene zelenjave, ki je prekinila z delom. Kotlovnica je od takrat ustrezno konzervirana. Kotel vključuje gorilnik na kurilno olje (opcijsko), lahko pa deluje tudi na plin. Pregled kotla je bil opravljen junija 2025 s strani specialista za kotle, ki je zajemal meritve debeline sten in tlačni preizkus. Rezultati preizkusa so bili ugodni. Tehnični podatki kotla: Proizvajalec: ATTSU Model: RL 3000/8 (cevni) Gorilnik: Kurilno olje Ijdpfjwxd Atex Ah Aotr Serijska številka: 2887 Parna zmogljivost: 3000 kg/h nasičene pare Nazivni tlak: 8,3 bar Preizkusni tlak: 12,5 bar Volumen: 3125 litrov Leto izdelave: 2008

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R95-0839, Sistem za natančno razigljevanje in poliranje Extrude Hone Vector, model 8/6. Primeren za poliranje velikih orodij za ekstrudiranje in preoblikovanje, kot tudi za razigljevanje in poliranje preciznih delov v malih in srednje velikih serijah. Delovna miza višina 1180 mm, razdalja med stebri 711 mm. Največja odprtina 578 mm, najmanjša odprtina 70 mm. Premer cevi za medij 203 mm. Prostornina cevi za medij 10.3 litra. Tlak za iztiskanje medija 13,6–58,15 bar. Hitrost dovajanja medija 0–41,5 cm³/min. Hidravlična vpenjalna sila 20–26,7 ton. Vključen je 5 KM agregat ter upravljalna plošča. TEHNIČNE SPECIFIKACIJE: Letnik: 1995 Serijska številka: R95-0839 Premer cilindra za medij…………203 mm Prostornina cilindra za medij…………10,3 litra Premer hidravličnega bata…………152 mm Hidravlična vpenjalna sila…………29,4 ton Največja odprtina med orodnimi ploščami…………254 mm Višina delovne mize…………1180 mm Razdalja med stebri…………610 mm Potreben tlak stisnjenega zraka…………4 bar Tlak pri iztiskanju medija…………13,6–58,15 bar Hitrost dovajanja medija…………0–33.65 litra/min Elektrika…………230–460V/3Ph/60Hz Dimenzije (zaprta)…………1040 mm (d) x 1295 mm (š) x 2690 mm (v) Teža…………2270 kg OPREMLJEN Z: Iedpfx Aheryv Ixs Aotr Allen Bradley programabilni logični krmilnik (PLC) Hidravlična agregatna enota 20 KM Števci pomika in cikla medija

Leto izdelave: 2017, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Die Presse war vom 3/2017 bis 2022 im Betrieb, als sie professionell demontiert wurde. Sie wird in einem geschützten Lager in Kirov, Russland, aufbewahrt. Die Presse wurde maximal 6 Tage pro Woche im 2-Schicht-Betrieb genutzt. Auf dieser Presse wurden mehr als 60.000 große Waschbecken produziert und verkauft. Preis: 280.000 EUR. Eigentümer der Presse ist Dřevojas, Tschechische Republik. Der Neupreis der Maschine betrug 456.000 EUR. Abmessungen: Itodpfx Ahsrt Tw Dj Asr Breite: ~4.920 mm Länge: ~14.020 mm Höhe: ~3.085 mm Gewicht: ~45 t (Produktwagen-Gruppe und Formen sind nicht enthalten) Maximale Formgröße: 1.000 mm x 1.700 mm x 650 mm Maximale Formenanzahl: 8 horizontal oder 12 vertikal Stromversorgung: 380 V Druckluft: 16 bar Wasser (45 °C): mind. 4 bar Wasser (70 °C): 3–4 bar

Stanje: rabljeno, Leto izdelave: 2018, DMG Mori Sprint 32/8 CNC-Langdrehautomat Baujahr: 2018 Steuerung: Fanuc 32-B Plus 8 Achsen Leistung: 75 PS Drehzahl: 8.500 U/min Stangendurchlass: 32 mm Mit 3,65 m Patriot 338 Stangenlader Ausstattung gemäß Abbildung Maschinenkonzept: Anzahl Linearachsen + C-Achsen: 6 + 2 Anzahl Spindeln: 2 Anzahl Kanäle: 2 Itodpfxexxm A Te Ah Asr Hauptspindel: Max. Stangendurchlass: 32 mm Drehzahl: 8.500 U/min Leistung (S2 30 min/S1): 7,5/5,5 kW Drehmoment (S2 30 min/S1): 51,9/40,4 Nm Gegenspindel: Max. Stangendurchlass: 32 mm C-Achse (0,001°) Drehzahl: 8.500 U/min Leistung (S2 30 min/S1): 3,7/2,2 kW Drehmoment (S2 30 min/S1): 23,6/14 Nm Bearbeitungsbereich / Verfahrwege: Z1-Achse (Spindelweg): 100 mm Schnellverfahrweg (X1, Z1, X2, Z2/Y1, Y2): 40/30 m/min Beschleunigung Linearachsen: 5 m/s² Werkzeugaufnahme auf Schlitten 1: 6 feste Drehmeißel Front-/Rückseitenbearbeitung: 4/4 Werkzeuge Angetriebene Werkzeuge: 2 + 2 Max. Drehzahl: 6.000 U/min Leistung (S3 40%/S1): 1,9/1 kW Max. Drehmoment (S3 40 %/S1): 3 Nm Die DMG Mori Sprint 32/8 Baujahr 2018 ist ein Hochleistungs-CNC-Langdreher für präzise, schnelle und vielseitige Bearbeitung komplexer Kleinteile. Mit 8 Achsen (6 Linearachsen, 2 C-Achsen) und FANUC 32i-B Plus Steuerung (10,4“-Farbdisplay) bietet diese Maschine höchste Flexibilität. Die Doppenspindelausführung erreicht bis zu 8.500 U/min; die Hauptspindel liefert 7,4 PS und 29,8 ft-lbs, die Gegenspindel 3 PS und 10,3 ft-lbs Drehmoment. Beide Spindeln eignen sich für Stangendurchmesser bis 32 mm und sind ideal für die präzise Fertigung in Medizin-, Luftfahrt- und Automobilindustrie. Simultanbearbeitung mit bis zu zwei Werkzeugen sowie erweiterte Rückseitenbearbeitung sind möglich. Der Bearbeitungsraum sowie die Achsenverfahrwege (Z1, X1/Y1, X2/Z2/Y2) ermöglichen komplexe, mehrseitige Bearbeitungsprozesse. Die Werkzeugbestückung umfasst 8 angetriebene Stationen und vielfältige Konfigurationen für Haupt- und Rückseitenbearbeitung mit bis zu 6.000 U/min und 3 Nm Drehmoment. Das Tool Monitoring System zeigt grafisch die Werkzeuglast an und unterstützt vorausschauende Wartung zur Minimierung von Stillstandszeiten. Weitere Merkmale sind eine Hochdruck-Kühlmittelanlage sowie integrierte Luftkühlung für konstante Thermik und effektiven Spänetransport. Mit einer Stellfläche von nur 2,8 m² und einem Gewicht von 3.550 kg ist die Sprint 32/8 eine äußerst platzsparende, leistungsstarke Lösung für jede leistungsorientierte CNC-Fertigung. Diese Maschine steht für effiziente Serienproduktion mit höchster Wiederholgenauigkeit, Durchzugskraft und Wirtschaftlichkeit.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, MLINARSKA NAPRAVA s kapaciteto 8 t/h z valjčnim stiskalnikom, nagnjenim sitom in 2 zračnima separatorjema. Vhod: vhodna zrnavost Itjdpfox Agx Ajx Ah Ajr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 29.200 h, Dodatna oprema Mehanska in električna priprava za sistem gašenja požara Hladilni sistem s kapaciteto 600 l in filtrom 50 µm Črpalka z možnostjo delovanja pri 8 ali 20 bar Itodpsx D H I Tsfx Ah Asr Podajalnik palic IEMCA Boss 332E za dolžino palic do 3 m Separator oljne megle Bristol B270/E Premični glavastoj (80 mm) z orodji na vozičkih ter detekcijo preloma orodja Ta stroj Gildemeister Sprint 20-8 je bil izdelan leta 2010. Opremljen je s hladilnim sistemom s kapaciteto 600 l in filtrom 50 µm, ter visokotlačno črpalko z možnostjo delovanja pri 8 ali 20 bar. Stroj vključuje separator oljne megle Bristol B270/E in podajalnik palic IEMCA Boss 332E za palice do 3 m. Z višino izmeta ostružkov 1.250 mm je zasnovan za učinkovito delovanje. Za več informacij o tem stroju nas kontaktirajte. Področja uporabe Struženje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.188 kg, skupna dolžina: 1.940 mm, skupna širina: 1.070 mm, skupna višina: 1.800 mm, moč: 55 kW (74,78 KM), volumenski pretok: 511,8 m³/h, tlak (maks.): 8 letvica, Prodajamo vijačni kompresor MA SB 55-8 (pogonski jermen Poly-V). Kompakten, zelo tih in energetsko učinkovit. Opremljen je z elektronskim krmilnikom, visokokakovostnim hladilnim sistemom, integriranim oljnim separatorjem in zvočno izolacijo. Primeren za delavnice, proizvodnjo ali servisne delavnice. Zanesljivo delovanje, nizki stroški vzdrževanja in enostavna namestitev. Lastnosti: Iedpfjx E Rl Iox Ah Aetr oljno mazano pogon na jermen stalna hitrost zmogljivost: 8,53 m³/min moč motorja: 55 kW maksimalni tlak: 8 bar dimenzije (d x š x v) (mm): 1940 x 1070 x 1800 teža: 1188 kg Slike so simbolične. Garancija: 24 mesecev Pariteta: EXW Logatec Cena ne vključuje 22% DDV

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 56 mm, stružna dolžina: 1.310 mm, dolžina podajanja os X: 280 mm, dolžina podajanja os Z: 1.310 mm, For sale is a cycle-controlled lathe, brand Richyoung, model RIC-TC1860, equipped with an 8-position tool turret from Sauter. This promotional price applies for collection until 28.03.2025. The machine is in excellent condition and fully functional. It has only been used for single orders. The machine has been regularly cleaned and well maintained. Technical data: Year of manufacture: 2008 Itsdpfx Ahev Tc Dts Asr Control: Fagor Swing over bed: 460 mm Swing diameter over cross slide: 230 mm Centre distance: 1,500 mm Spindle nose: D1-6 Spindle bore: Ø 56 mm Spindle speed: max. 3,100 rpm X-axis travel: 280 mm Z-axis travel: 1,310 mm Spindle motor: 5.5 kW Tool turret: Sauter Tool positions: 8 Tool holder: VDI 30 Included in the offer: chip tray, tool turret, 3-jaw chuck incl. 4 sets of 3 exchangeable jaws, live centre. Additionally available: 2 collet tool holders incl. collets, various centres, 4 additional 3-jaw chucks, various exchangeable jaws for chucks, 8 boring bar holders, 10 radial tool holders (RH), 3 drill chucks, soft boring jaws. Transport and loading can be arranged upon request for an additional fee, Europe-wide. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your own? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 12.405 h, 2011 | Komatsu PC228US-LC-8 | Used Crawler Excavator | 12,405 operating hours 📍 Location: Austria, Eberdorf 🚛 Delivery available to your location – Use our shipping calculator for a transport quote! 💰 Buy Now for EUR 29,900 or make an offer. Payment on delivery available for a modest fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection checkpoints: 45 approved ✅ 16 imperfect ℹ️ 1 issue ⚠️ 📌 Inspector's Comment: Operating hours and machine condition may change, as it remains in active use. Active service messages – machine is operational but requires attention. 📄 Want a full inspection report, additional photos, or a video? Tip: Reference "39586 Equippo" for more online details. 💡 Why choose this machine and our service? ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure, flexible payment methods Iodpfx Aexzlnyeh Ajtr 🔄 Looking for more equipment options? We provide practical tools and resources for all equipment owners and operators – easily accessible on our platform.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Iodpfxsxwgngo Ah Astr 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, Leto izdelave: 2018, Rated power: 7.7 MW Maximum power: 8.47 MW Rated speed: 1,150 rpm Maximum speed: 2,200 rpm Iedpfjrr Ammox Ah Ajtr Rated torque: 63,940 Nm Maximum torque: 70,330 Nm 8 MW gearbox test bench, closed-loop system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Schraml M-RX 130 Vertikalni center za vrtanje in rezkanje stekla Obdelovalne dimenzije: Maks. dolžina stekla: 3.200 mm Maks. višina stekla: 1.300 mm Min. dolžina stekla: 600 mm Min. višina stekla: 160 mm Debelina stekla: 4-20 mm Iodpfx Ahewzkm Rs Astr Vključena oprema: - 2x elektro vreteno 5,5 kW 0-12.000 min⁻¹ - Magazin z 2x 8 mesti za orodje - CAD/CAM - Centralno mazanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.030 kg, skupna dolžina: 1.940 mm, skupna širina: 1.070 mm, skupna višina: 1.800 mm, moč: 45 kW (61,18 KM), volumenski pretok: 468,6 m³/h, tlak (maks.): 8 letvica, Prodajamo vijačni kompresor MA SB 45-8 (pogonski jermen Poly-V). Kompakten, zelo tih in energijsko učinkovit. Opremljen je z elektronskim krmilnikom, visoko kakovostnim hladilnim sistemom, integriranim ločevalnikom olja in zvočno izolacijo. Primeren za delavnice, proizvodnjo ali servisne delavnice. Zanesljivo delovanje, nizki stroški vzdrževanja in enostavna namestitev. Značilnosti: namaščen z oljem Iodpfx Ajx E Rk Doh Aetr pogon na jermen stalna hitrost zmogljivost: 7,81 m³/min moč motorja: 45 kW najv. tlak: 8 bar dimenzije (dxšxv) (mm): 1940 X 1070 X 1800 teža (kg): 1030 kg Slike so simbolične. Garancija: 24 mesecev Pariteta: EXW Logatec Cena ne vključuje 22% DDV

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 620 mm, višina skobljanja: 300 mm, delovna širina: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22.500 Year of Manufacture: 2003 General Data Machine Type: Planing and profiling machine with chamfering units Total connected load: approx. 222.8 kW Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-duty extraction unit (AZG): 4 rollers, pneumatic roller pressure, cardan drive shafts Tools / Aggregates Hobkow Ttvwo N Nqx Hsfn • Planer spindles: Bottom planer spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW • Chamfering units (chamfering aggregates): 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable to chamfer width Itjdpfsx E Dv Tox Ah Aor Total number of machining tools: 8 pieces (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Additional motors (separate): Height adjustment (thickness) Width adjustment displacement adjustment machine adjustment Extraction system Individual extraction nozzles Ø 160–200 mm depending on unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planer heads and tools (see attached photo documentation) Control cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality bar materials such as construction timber (KVH), duo/trio beams or glulam (glued laminated timber). Additionally, SUPERMASTER machines are also used for the production of cross-laminated timber (CLT). Thanks to the powerful feed system, large, heavy, wet, frozen, as well as small, fine workpieces present no challenge for the SUPERMASTER.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 14736259, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 200 mm, skupna višina: 2.100 mm, skupna dolžina: 1.800 mm, skupna širina: 1.500 mm, skupna masa: 2.000 kg, HYUNDAI HIT-8 S CNC stružnica - Obratovalna napetost: 380 V Iedpjx Hwhfofx Ah Aotr - Frekvenca: 50/60 Hz - Nazivni tok: 24 A - Priključek: 25,5 kVA Pozor: artikel je treba obvezno prevzeti na še dogovorjen datum med 04. in 12.03.2026. FCA D-75181 Pforzheim – naloženo na tovornjak.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. Itsdpfsxcdfgjx Ah Aer The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, skupna masa: 35.000 kg, prva registracija: 12/2017, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.700 mm, Oprema: ABS, 8 kosov Schmitz hladilnikov Prva registracija: 12/2017 Večtemperaturni Itodpfex Eqcasx Ah Aer Dvojna paleta Širina za rože 249 cm Notranja višina 270 cm Škatla za palete Nakladalna ploščad Agregat: Schmitz Večtemperaturni Ure 5900h do 7300h Tel: Z veseljem poskrbimo za vaše financiranje ali leasing Prodaja v EU: neto po predložitvi podjetniških dokumentov in številke za DDV DDV kavcija 2000 € Govorimo angleško Govorimo srbsko-hrvaško Naše storitve za vas: - Carinske tablice - Izvozni dokumenti in EUR1 - Prevoz po vsem svetu - Možnost prenočitve - Prevoz z letališča München ali železniške postaje Passau Tel:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Schraml M-RX 130 Vertikalni center za vrtanje in rezkanje stekla Obdelovalne dimenzije: Iodpsw Skzhjfx Ah Aetr Maks. dolžina stekla: 3.200 mm Maks. višina stekla: 1.300 mm Min. dolžina stekla: 600 mm Min. višina stekla: 160 mm Debelina stekla: 4-20 mm Vključena oprema: - 2x elektro vreteno 5,5 kW 0-12.000 min⁻¹ - Magazin z 2x 8 mesti za orodje - CAD/CAM - Centralno mazanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.560 kg, skupna dolžina: 2.460 mm, skupna širina: 1.620 mm, skupna višina: 1.692 mm, moč: 90 kW (122,37 KM), volumenski pretok: 960 m³/h, tlak (maks.): 8 letvica, vrsta hlajenja: zrak, Vijačni kompresor OMEGA AIR D 90 je zasnovan z visokokakovostnim sesalnim ventilom in sklopko, kar omogoča nižjo porabo energije in večjo energetsko učinkovitost. Zaradi nizke ravni hrupa ter odsotnosti pogonskih jermenov in prenosov, je ta vijačni kompresor zelo zanesljiv in ima nižje stroške vzdrževanja ter manj izpadov. Prenos moči je neposreden, nadzor motorja je s fiksno hitrostjo. Kompresor je zračno hlajen. Moč: 90 kW Tlak: 8 bar Kapaciteta: 16 m3/min Prenos moči: neposreden Nadzor motorja: fiksna hitrost Hlajenje: zračno Dimenzije: 2460 x 1620 x 1692 Itsdpfx Ahox E Rd Ro Ajr Teža: 2560 kg Slike so simbolične. Garancija: 24 mesecev Pariteta: EXW Logatec Cena ne vključuje 22% DDV.

Stanje: zelo dobro (rabljeno), EHT Guillotine Shear Brand: Eisen u. Hammerwerk (EHT) Model: ASS 8-30 Year of Manufacture: 1967 Serial Number: 10625 Cutting Length: 3000 mm Maximum Sheet Thickness: 8 mm Ijdpfxowc Rgas Ah Astr Motor Power: 11 kW Connection: 380 V Dimensions: 3950 x 3100 x 1900 mm

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Itedexcdg Depfx Ah Aer Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 860 kg, skupna dolžina: 1.600 mm, skupna širina: 1.000 mm, skupna višina: 1.360 mm, moč: 37 kW (50,31 KM), volumenski pretok: 366 m³/h, tlak (maks.): 8 letvica, vrsta hlajenja: zrak, Vijačni kompresor OMEGA AIR D 37 je zasnovan z visokokakovostnim sesalnim ventilom in sklopko, kar zagotavlja nižjo porabo energije in višjo energijsko učinkovitost. Zaradi nizke ravni hrupa ter odsotnosti prenosnih in pogonskih jermenov je ta vijačni kompresor zelo zanesljiv in ima nižje stroške vzdrževanja ter manj zastojev. Prenos moči je direkten, nadzor motorja pa je pri fiksni hitrosti. Kompresor je hlajen z zrakom. Moč: 37 kW Tlak: 8 bar Kapaciteta: 6,1 m3/min Prenos moči: direkten Nadzor motorja: fiksna hitrost Hlajenje: zrak Dimenzije: 1600 x 1000 x 1360 mm Teža: 860 kg Slike so simbolične. Garancija: 24 mesecev Pariteta: EXW Logatec Iedpfx Aox Ezqzsh Aetr Cena ne vključuje 22 % DDV.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Iedpexcdgqefx Ah Ajtr Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.600 mm, skupna širina: 1.000 mm, skupna višina: 1.360 mm, moč: 22 kW (29,91 KM), volumenski pretok: 216 m³/h, tlak (maks.): 8 letvica, vrsta hlajenja: zrak, Vijačni kompresor OMEGA AIR D 22 je zasnovan s visokokakovostnim vstopnim ventilom in sklopko, kar zagotavlja nižjo porabo energije in večjo energijsko učinkovitost. Zaradi nizke ravni hrupa ter brez prenosa moči in pogonskih jermenov je ta vijačni kompresor zelo zanesljiv in ima nižje stroške vzdrževanja ter manj izpadov. Prenos moči je direkten, krmiljenje motorja pa z vnaprej določeno hitrostjo. Kompresor je zračno hlajen. Moč: 22 kW Tlak: 8 bar Kapaciteta: 3,6 m3/min Prenos moči: direkten Krmiljenje motorja: fiksna hitrost Hlajenje: zračno Dimenzije: 1600 x 1000 x 1360 Teža: 580 kg Itedpsx Ezp Dsfx Ah Aer Slike so simbolične. Garancija: 24 mesecev Pariteta: EXW Logatec Cena ne vključuje 22% DDV

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable Itjdjxcdf Hjpfx Ah Aer 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285