Kirchner Leipzig Stroj nakup rabljenega (27.012)

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 50 h, številka stroja/vozila: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminium with T-slots, crosswise every 250 mm Max. load: 1,000 kg evenly distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow air / MQL: external Linear axis drives Feed rate X and Y axes: up to 50 m/min Feed rate Z axis: up to 30 m/min Ledpfx Abswwq Hcebjhb Colour Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - 15-position tool changer - Control unit in separate, mobile console

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, delovne ure vretena: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h Travel ranges: X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Ledow Au H Rjpfx Abbohb Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 1095, Spoštovane stranke, trenutno vam ponujamo univerzalni rezkalni stroj za modelarstvo in orodjarstvo znamke Zimmermann. Tu so tehnični podatki stroja: Delovna miza: 630 x 490 mm Dodatna miza: 490 x 400 mm Krožno gibanje: 360° Nagib: 2x 90° Vpenjalni utor: 14 x 25 mm Moč: 1,1 kW Število vrtljajev: 560 - 14.000 min⁻¹ Nosilec orodja: ISO30 / SK30 - Motorna zavora - Motorizirano nastavljanje višine - Digitalni prikazovalnik z meritvami Heidenhain - CE označba Lsdpsxy Ntqofx Abbohb - Omara s predali Potrebni prostor: 1.400 x 1.520 x 1.970 mm Teža: 790 kg Stroj je bil zaradi čiščenja v celoti razstavljen, vključno s podpornim delom. Tehnično in vizualno je stroj v odličnem stanju! Veselimo se vaših vprašanj in povpraševanj.

Stanje: generalkompletno obnovljen (rabljeno), Dear customers, we are currently offering, upon request/order, factory-refurbished disc or plate sanding machines for model and mold making from the Zimmermann brand. Here are the technical specifications of a SZ2 type machine: Disc diameter: 600 mm, double-sided Table length: 755 mm Table width: 285 mm Table tilting: 30/45° Bevel stop: 60/60° Power: 1.5 kW Speed: 1,000 rpm Reversible rotation (right/left) Waldmann machine lamp, dust and shock resistant Emergency stop with motor brake Angle stop Dimensions: L 90 cm x W 80 cm x H 140 cm Weight: 390 kg Lhjdpex Ahi Asfx Abbsb After refurbishment, the machine is equipped with completely new electronics including a motor brake, is painted in RAL 7035 light grey, and comes with accessories such as a bevel stop, adhesive, and sanding discs included in delivery. We look forward to your questions and inquiries!

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 306, Initial commissioning: 2024 Control: Heidenhain TNC 640 incl. HR 520 handwheel X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping area: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots crosswise every 250 mm Max. load: 1000 kg evenly distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 rpm Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blow air / MQL: external Linear axes drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - Work area cover - 16-position tool changer - Control on separate, mobile console Optional at extra charge: Lhjdpjvy Dugsfx Abbeb - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnostics Pictures show an identical machine with slightly different equipment!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Lodpfx Abjwywciobshb Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Lsdpow Rl S Sefx Abbohb Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 110° C-axis: ± 360° Control: Heidenhain TNC 640 with HR 520 handwheel Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum, with cross T-slots spaced every 250 mm Max load: 1,000 kg evenly distributed 2-Axis Milling Head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow-off air: external Linear Axis Drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Ljdpfx Absxm Tv Ajbehb Color Enclosure, portal, control cabinet: light grey Z-slide and milling head: blue Additional Equipment - 15-position tool changer - Oriented milling spindle, e.g. for threading - Direct measuring system in all 5 axes - 2-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Condition of the Machine Fully functional, available immediately, and still powered until November 2025

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Dear customers, we are currently offering you a fully refurbished oscillating drum sanding machine for model and mold making, made by Zimmermann. Here are the technical specifications for type OZS: Table length: 500 mm Table width: 500 mm Table height above floor: 1,050 mm Lhedpjxlzizefx Abbeb Drum diameter: 20–120 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm with emergency stop Dimensions: 840 x 810 x 1,300 mm Weight: 180 kg The machine has been newly painted in RAL 7035 light grey. A completely new control cabinet has been built and installed, meaning that all electrics are brand new. For machine safety, a motor brake and emergency stop system have been fitted. Mechanical components were either purchased from the manufacturer or custom made. Included in the scope of delivery are one drum of your choice, sanding sleeves, and other machine-specific accessories. The machine is sold with a 6-month warranty! Price plus VAT, which will be shown separately on the invoice. Free and insured shipping within Germany! If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 82.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 65 m/min, hitrost podajanja osi Y: 65 m/min, hitrost podajanja os Z: 65 m/min, največja hitrost vretena: 20.000 obr/min, hitro pomikanje X-os: 65 m/min, hitri pomik os Y: 65 m/min, hitri pomik na osi Z: 65 m/min, vrtilni moment: 63 Nm, skupna masa: 90.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Commissioning: 2008 Control: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X direction) 1,800 mm (Y direction) 1,150 mm (Z direction) 5-axis machining with a 300 mm long tool in a single setup (A-axis at 90° can be programmed). Machine on power: approx. 82,500 h Total spindle hours: approx. 36,500 h Ljdpfxoxl R Hvo Abbohb Clamping table No machine table included with the machine. Upon request, we are happy to offer a customized solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped), A & C axes: 2,000 Nm Linear axes drives Feed rate X-, Y- and Z-axis: up to 65 m/min Axis acceleration X-, Y- and Z-axis: up to 5 m/s² Electrical data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weights Space requirement for machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 touch probe - BLUM LaserControl NT mini Machine condition Fully functional, in very good condition. Can be inspected under power until April 2026.

Stanje: rabljeno, Leto izdelave: 1995, CNC portalna plamenska rezalna naprava Proizvajalec: Messer Tip: Omnimat P 7000 Leto izdelave: 1995 CNC upravljanje: Global Control Plus Širina tira: 7.000 mm 8 avtogenskih gorilnikov tip ALFA 8 dvigal Omnilift 200 Brez tirnice Lhedpfx Aeyay Dhsbbeb Brez mize Brez filtra

Stanje: rabljeno, Leto izdelave: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing milling unit, including DIA tools, jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station, radius R 2.5 mm Technical description: - With hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutters (combination design) and fine adjustment from the operator side - Free mounting positions for additional machining units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece feed - Robust chain drive - Ergonomically positioned control panel - Double roller upper pressure beam - Viewing windows for machining units from the rear and operator side - PLC control system including touchscreen Technical data: - Feed speed: 10 m/min - Panel thicknesses: 8–40 mm - Weight: approx. 1,550 kg depending on configuration - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic incl. cooling and antistatic spraying unit, year 2014 1 unit hot-air aggregate for creating the optical zero joint using specially designated edge materials - Including pneumatic glue pot positioning - Including cooling and antistatic spraying unit - Including 2 additional edge channels in quick-change design - Including special edge rounding unit, maximum workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Can be retrofitted later – additional costs upon request Technical data: - Max. panel thickness: 40 mm Lodpfsycuknjx Abbehb - Max. edge thickness: 1.2–2.0 mm - Feed speed: 7–10 m/min - Air consumption: approx. 280–580 l/min (Airtronic only), electronically controlled - Ready for operation in approx. 2 min Special design: minimum workpiece thickness 8 mm 1 unit Airtronic retrofit for PLC-controlled machines available on request 1 unit retrofit only possible at the factory in Hüllhorst–Oberbauerschaft Upgrade to 8 mm edge thickness 1 unit for maximum workpiece thickness of 40 mm, including pneumatic saw adjustment Special infeed fence for overloaded panels 1 unit for 16 mm and 19 mm thicknesses, maximum veneer overhang 8 mm Separate pneumatic cutter adjustment 1 unit, controllable from the operator panel (straight/radius) Buffing station (swab) 1 unit Corner rounding unit 1 unit, including combination tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Ball bearing for corner rounding cutter 24.1 mm 1 unit Ball bearing for corner rounding cutter 24.2 mm 1 unit Corner rounding cutter for 60 mm workpiece thickness 1 unit quick-change device for corner rounding unit 1 unit exchangeable motor 0.37 kW for corner rounding unit 1 unit including terminal box with attached electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or alternatively cycle counter, including cutter R 1.0 mm Ball bearing 24.1 mm for corner rounding unit 1 unit ball bearing 24.2 mm for corner rounding unit 1 unit radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm Radius scraper 1 unit including pneumatic lifting device, radius R 1.0 mm Flat scra

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, - Swivelling operator panel - CNC control SIEMENS 828D - Motors for horizontal and vertical spindles - Feed motors with inverter - Precision ball screws for X/Y/Z axes - Automatic 2-speed gearbox for spindle speeds - 1 long milling arbor 27 mm - 3 reduction sleeves (MT1, MT2, MT3) - Pneumatic-hydraulic clamping system for vertical spindle - Spindle guard with safety switch - Work area guards with electrically interlocked doors - Counter-support for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and leveling screws - Operating tools - Technical documentation - CE certified - Colours: * RAL 7024 - Graphite grey * RAL 7035 - Light grey Technical Data: Fixed angle table: - Working area dimensions: 1,000 x 500 mm - T-slots: number / width x spacing: 8 pcs / 14 x 63 mm Lhedjvupa Rspfx Abbeb - Max. table load: 250 kg Vertical table: - Working area dimensions: 1,200 x 250 mm - T-slots: number / width x spacing: 3 pcs / 14 x 63 mm Travels: - Axis travel: automatic/manual - Longitudinal (X): 600 mm - Cross (Y): 500 mm - Vertical (Z): 400 mm Feeds: - Regulation: infinitely variable - Range (X,Y,Z): 0 – 2,000 mm/min - Rapid traverse - X,Y,Z axes: 5,000 mm/min - Rapid traverse - Z axis: 4,000 mm/min Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 steps): 0 – 3,200 rpm Vertical milling head: - Tool holder: DIN 69871 / ISO 40 - Speed range (2 steps automatic): 0 – 3,200 rpm - Head swiveling: ±90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle centre to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 kW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, - FAGOR 3-axis position display, model: 400iB INNOVA - Milling head manually swivels ± 90° - Manual tool clamping via draw bolt M 16 for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axes - Precision ball screw drives in X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 pc. long milling arbor 27 mm - 3 pcs. reduction sleeves (MK1, MK2, MK3) - Spindle guard with safety switch - Splash guard on 3 sides of the horizontal table - LED work light - Automatic lubrication system for X/Y/Z guideways - Mechanical handwheels for X/Y/Z axes - Coolant system - Covers for X/Z axes - Operating tools - Technical documentation - CE conform design Colours: - RAL 7024 – Graphite grey - RAL 7035 – Light grey Technical Data: Fixed Angle Table: - Working surface dimensions: 845 x 390 mm - T-slots: Number / Width x Pitch: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical Table: - Working surface dimensions: 950 x 250 mm - T-slots: Number / Width x Pitch: 3 pcs. / 14 x 63 mm Travel distances: - Axis travel: automatic/manual - Longitudinal (X): 420 mm - Cross (Y): 220 mm - Vertical (Z): 380 mm Vertical Milling Head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 – 2,600 rpm - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 – 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: ± 90° - Spindle nose/table distance: 90 – 470 mm - Spindle centre to column – min./max.: 120 – 340 mm Horizontal Spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 – 2,600 rpm - Spindle centre/table distance: 100 – 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min Lodpfxjvt Tn Aj Abbehb - Rapid traverse (X,Y,Z axes): 1,000 mm/min Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and Weight: - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Stanje: novo, Leto izdelave: 2024, - FAGOR 3-axis digital readout, model: 400iB INNOVA - Milling head manually swivels ±90° - Manual tool clamping via M16 draw bolt for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Servo motors with inverter for X/Y/Z axes - Ball screws in X/Y/Z axes - Gearbox for 18 spindle speeds - Counter-support with support bearing - 1 pc. long milling arbor 27 mm - 3 pcs. reduction sleeves (MK1, MK2, MK3) - Spindle guard with safety switch - Splash guard on 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guideways - Mechanical handwheels for X/Y/Z axes - Coolant system - Covers for X/Z axes - Operating tools - Technical documentation - CE-compliant version Colours: - RAL 7024 – Graphite grey - RAL 7035 – Light grey Technical Data: Fixed Angle Table: - Working surface dimensions: 1,000 x 540 mm - T-slots: number / width x spacing: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical Table: - Working surface dimensions: 1,200 x 250 mm - T-slots: number / width x spacing: 8 pcs. / 14 x 63 mm Travels: - Axis travels: automatic/manual - Longitudinal (X): 600 mm - Cross (Y): 500 mm - Vertical (Z): 400 mm Vertical Milling Head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 – 3,200 rpm - Number of spindle speeds: 18 (40 – 65 – 83 – 100 – 130 – 160 – 200 – 250 – 400 – 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swiveling: ±90° - Distance spindle nose/table: 70 – 470 mm - Distance spindle centre to column – min./max.: 160 / 660 mm Horizontal Spindle: - Tool holder: ISO 40 / DIN 2080 - Number of gear steps: 18 - Speed range: 40 – 3,200 rpm - Distance spindle centre / to 2nd T-slot: 95 – 495 mm - Distance spindle centre / to 3rd T-slot: 180 – 580 mm Feeds: Lhjdpfxovunrfs Abbob - Infinitely variable - Range (X,Y,Z): 0 – 600 mm/min - Rapid traverse (X, Y, Z axes): 600 mm/min Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight: - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - Coolant system - Chip tray - Quill cover - Set of operating tools - Technical documentation - CE version - Colour: * RAL 5015 – Sky Blue * RAL 7035 – Light Grey Optional accessories: - SINO 3-axis digital readout: € 1,995.00 - 1 set of levelling wedges (4 pcs.): € 480.00 Technical data: Work table: - Clamping surface of the fixed angle table: 670 x 320 mm - T-slots: number / width x spacing: 5 / 12 x 63 mm - Max. workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm - T-slots: number / width x spacing: 3 / 12 x 60 mm Work spindle: - Toolholder horizontal and vertical: ISO / DIN: 40 / 2080 - Main drive motor output 100% duty cycle: 1.5 kW Vertical milling head: - Speed range: 45 – 2,240 rpm - Number of speed steps: 18 - Manual quill adjustment: 60 mm - Swivel range: 360 degrees Travel paths: - X-axis automatic / manual: 280 / 300 mm - Y-axis automatic / manual: 250 / 270 mm - Z-axis automatic / manual: 300 / 310 mm Feeds: - Feed range: 12.5 – 630 mm/min - Number of feeds: 18 - Rapid traverse: 1,200 mm/min Dimensions and weight: - Length: 1,265 mm - Width: 1,080 mm Lhedpfx Aeg D Rhhebbob - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / machine acceptance: Before loading the machine SUBJECT TO ERROR AND PRIOR SALE!

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Naslov ponudbe: Bobst Domino 100 zgibalni stroj Lsdpfxsx An Dae Abbehb Proizvajalec: Bobst Model: Domino 100 Tehnično stanje: Dobro 3-točkovno lepljenje Značilnosti: - Sistem hladnega lepljenja - Spodnji disk: 5 mm - Dva (2) lepilna pištola - Dva (2) glavna merilna instrumenta - Valco kanalno upravljanje z visokotlačno črpalko - Daljinski upravljalnik za operaterja

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Kerma TS 3E Izsekovalni stroj Generalno obnovljen leta 2000 Ledpex Anvpefx Abbehb Izsekovalna površina 850x1250 mm / Dimenzija vpenjalnega okvirja 800x1200 mm Okvir za hitro vpenjanje Varnostne mize za podajanje in odlaganje Maksimalna pritisna sila 240 t Dimenzije: 2500 x 2000 x 1650 mm Moč: 7,5 kW

Stanje: potreben popravila (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 103-20 ` 104-20, skupna višina: 1.900 mm, skupna širina: 3.400 mm, skupna dolžina: 4.100 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, We are selling 2 identical apple slicing machines, with a common feed tank and feed line.T his machine is suitable for processing various fruits such as: apples, pears, peaches, nectarines, persimmons, oranges with skin, kiwis, pineapples. It may be used for slicing into RING SLICES, SEGMENTS and CHUNKS with or without CORING and it may be used for producing WHOLE CORED fruit such as apples, pears, peaches, nectarines, etc. It is therefore perfectly suitable for preparing fruit for the drying industry, for the confectionery and baking industry, for fresh fruit salads, for the snacks industry or for fruit preserves. The machine is very simple and versatile in that it allows switching very quickly from RING-SLICING to SEGMENTING to CHUNKING (with or without CORING according to the type of fruit being processed) to CORING ONLY depending on your production needs. It allows changing very rapidly as well the thickness of slices, the number of segments, the dimension of chunks and the diameter of coring. This machine is completely made of AISI 304 stainless steel and it may be installed inline with other machines. Roundish fruit may be automatically fed, singulated in the loading area and then transferred onto the stainless steel conveyor equipped with an automatic orienting system, allowing automatic fruit alignment inside the tray hollows (automatic orienting system is suitable for apples, peaches, nectarines and leafless persimmons). Other types of fruit are manually positioned on the stainless steel conveyor. In the slicing section, a sharp and precise cut, which does not affect organoleptic qualities, guarantees maximum hygiene and healthy products. Here, fruit is sliced into RINGS or SEGMENTS or CHUNKS and/or CORED by means of interchangeable cutting units that allow varying slicing dimensions and coring diameter. Sliced fruit and vegetables are discharged on a belt conveyor. Cores fall underneath the working surface where a conveying belt, not included in the supply, may be installed to carry them out of the machine and discharge them into a collecting container. All safety guards may be easily removed thanks to quickly releasable interlocked hinges. This allows easy, quick and safe maintenance as well as thorough cleaning. Ljdpfx Absx Sx Azsbehb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: GS000506, Števec: 26‘795‘055 // Zmogljivost: 13.000 pol na uro Format: Največja velikost pol: 370 x 520 mm // Najmanjša: 105 x 145 mm Največja tiskovna površina: 360 x 520 mm Debelina: največ 0,4 mm Vlažilna enota: Alcolor filmsko vlažilno delo z hladilno napravo Baldwin BC 713 EF Puder naprava: Alphatronic 200 Oprema / dodatne informacije Ledjvw Ai Rjpfx Abbjhb Ultrazvočni nadzor dvojnega pola Heidelbergova naprava za vpenjanje plošč EasyPlate z avtomatskim pozicioniranjem valja za hitro menjavo plošč z enim orodjem. Kavčukasti valj z osrednjim zateznim vijakom za napenjanje sprednjega in zadnjega roba Avtomatska čistilna naprava za kavčuk in tiskarski valj (za običajne barve), primerna za konvencionalna in rastlinska čistila, programsko upravljana preko upravljalne plošče.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Stroj je na voljo s kamernim sistemom ali brez. Nova vretena integrirana. Lhodpfx Asx Hyd Nobbjb

Stanje: rabljeno, Leto izdelave: 1991, Premer kolesa - maks. --- mm Širina kolesa --- mm Lhjdpsya Eqasfx Abbjb Modul - maks. --- Modul - min. --- Krmilnik --- Skupna zahtevana moč --- kW Teža stroja ca. --- t Potreben prostor ca. --- m

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: omejena funkcionalnost, The fixing unit needs to be replaced (see photo), otherwise the machine is operational. Sale without warranty. Lsdpev Tzlpefx Abbohb

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 306.311 h, številka stroja/vozila: SČO2000, The machine is designed for scalding and removing bristles from pigs. Required time for scalding and dehairing: 3 minutes. Compact, robust stainless steel machine housing. Controls and ejector arm located on the left side. Electric heating. Available in piglet version Type SČO 1100 and large pig version SČP 2200. For Type SČO 1100, the water outlet is on the right side of the machine; for Type SČP 2200, water outlets are on both sides. All machines feature bristle removal at the front side. Dimensions: 2570 x 1400 x 1340 mm, Weight: 725 kg, 14.2 kW, 400 V. Suitable for pigs up to 2000 mm long and 280 kg; with Type SČO 2200 for pigs up to 2200 mm long and up to 350 kg (difficult at maximum capacity). Lhjdjpuy Agspfx Abbsb

Stanje: rabljeno,