Kirchner Leipzig Stroj nakup rabljenega (26.837)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, višina obdelovanca (maks.): 40 mm, delovna višina: 950 mm, model krmilnika: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Hedoyc S Haopfx Abhoh Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 33.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, višina obdelovanca (maks.): 60 mm, delovna višina: 950 mm, model krmilnika: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness of 22 mm: 55 mm Minimum working width with workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edging material, roll: 0.3 - 3 mm Maximum edge cross-section for PVC: 135 mm² Maximum edge cross-section for veneer: 100 mm² Maximum roll diameter: 830 mm MACHINE DETAILS Control: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine base for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive when feed is stopped Glue pot lifting mechanism when feed is stopped Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed guard Feed unit with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Hsdpfx Asyc Sr Aebhoh Pre-installed Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data acquisition Electric height adjustment Fixed stop side on the left Workpiece transport device Top pressure Separating agent spraying unit Jointing cutter unit, 2 x 3 kW Glue application unit A20 Basic for roll material up to 3 mm and strip material up to 20 mm, with melt unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Lubricant spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contouring milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with infinitely variable axis Multi trimming unit MN21, automatic Finishing unit FA11, with trimming unit, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Space for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging are not possible by the seller.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Hsdeycqc Tjpfx Abhoh Robot interface according to EUROMAP 67

Stanje: rabljeno, Kündig Brilliant 1 1100 Cd-Lack Kakovosten izdelek iz Švice KONSTANTNA MIZA / avtomatska nastavitev glave Širokopasovni kalibrirni in fini brusilni avtomat Kombinirana enota kontaktnega valja in brusne blazine z elektronsko vodenim segmentnim brusilnim čevljem DIAGONALNO / celotna brusilna enota je nagibna za 10° Nivo kontaktnega valja je brezstopenjsko nastavljiv glede na granulacijo Priključna moč cca 14 kW Delovna širina 1100 mm Paket za brušenje laka: - nihajoče odvijanje traku - brezstopenjska nastavitev hitrosti brusnega traku Hedpfx Ajyftuwjbhjh - podajalna hitrost 3–15 m/min, brezstopenjsko nastavljiva Stabilna vakuumska miza z lakiranim tepihom, ventilator integriran v ohišju stroja Nastavitev debeline po celotni delovni širini ENORMATIC hitro nastavljanje s sprožitvijo podajanja (za dolge obdelovance) Upravljanje prek zaslona na dotik za avtomatizacijo in vodenje vseh delovnih programov Vstopna in izstopna miza z valjčnimi nosilci Stroj JE PREGLEDAN V DELAVNICI in je V ODLIČNEM STANJU Na zalogi Lieboch

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Hedpoyfn Urefx Abhoh Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Hodpjyfn Tnsfx Abhsh Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Accura 1556 Premium Hodpjyfndaofx Abhjh popolnoma opremljen, sodoben robni lepilni stroj Prva dostava 2021 Stroj je v ODLIČNEM STANJU Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Na prodaj je rabljeni kombinirani stroj Robland X-310 z debelino oblanja do 230 mm. Stroj je v zelo dobrem stanju, strokovno prenovljen in pregledan s strani našega tehničnega osebja (popolnoma funkcionalen). Tehnični podatki: - 5-v-1 kombinirani stroj - Širina skobljanja/debelinjenja: 310 mm - 3-nožni valj (noži v pasovih) - Debelina oblanja: 4–230 mm - Krožna žaga z nagibom 90–45° Hedpfsyfv Tpex Abheh - Litoželezna pomična miza z kotnim prislonom - Frézka fiksna - 2 hitrosti rezkanja: 3000/6000 obr/min - 3 motorji po 2,2 kW / 3 KM - Prevozna naprava Kombinirani stroj se nahaja v kraju A-8561 Söding in si ga je mogoče ogledati kadarkoli v času naših odpiralnih ur. Vmesna prodaja pridržana! Sorodni izrazi: skobeljni stroj, debelinka, debelinsko oblanje, Felder, rezkalni stroj, krožna žaga, žaga Referenca: R-Z1720

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Raboteuse dégauchisseuse FELDER / HAMMER Largeur de rabotage : 410 mm Puissance du moteur : 4,0 kW, 400 V, 50 Hz Arbre porte-couteaux hélicoïdal Silent-POWER Nombre de couteaux : 62 Prise de passe maximale : 4 mm Levier de réglage pour profondeur de passe Longueur de la table de dégauchissage : 1800 mm Butée inclinable 90°–45°, anodisée Dimensions butée : 150 x 1100 mm Bouche d’aspiration Ø 120 mm Arrêt d’urgence Prête à brancher avec inverseur de phase Conforme CE Dimensions (env.) L x l x H = 1900 x 800 x 1000 mm Poids (env.) : 340 kg Remarques pour machines d’occasion : Hjdpfx Absydnptjhsh • Sous réserve d’erreurs dans les données techniques et vente préalable. • Les prix indiqués s’entendent départ site – hors chargement ! • Les machines sont nettoyées et testées en fonctionnement. • Toutes les machines sont vendues dans l’état où elles se trouvent sans aucune garantie. L’acheteur a la possibilité de venir inspecter les machines sur place. • Les accords particuliers ne sont valables que par écrit. (Nous ne répondons qu’aux demandes avec coordonnées complètes et numéro de téléphone !)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, H+K Four-Sided Planer and Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Motor upper spindle: 5.0 kW Motor lower spindle: 4.0 kW Motor left spindle: 4.0 kW, automatic floating head Motor right spindle: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed Feed motor power: 0.75 kW Total connected load approx. 18.0 kW, 400 V, 50 Hz Extraction connections: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3370 x 1330 x 1500 mm Weight approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Non-driven outfeed roller Automatic centralized lubrication Automatic star-delta starter INCLUDES 4 reversible-knife cutterheads INCLUDES operating manual & wiring diagram CE-certified All ball bearings NEW All V-belts NEW Hsdpfx Ajydmawsbhsh Note on used machines: • Technical data may be subject to errors and prior sale. • Prices quoted are ex works - free loading at location! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected without any guarantee or warranty claims. Potential buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will be answered only if you provide your address and phone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Edge Banding Machine SCM Model Olympic 500 HP 'T-ER2' Type of offer: LEASE RETURN, Used Machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL INFORMATION: A complete and versatile edge banding machine designed for small and medium-sized businesses, capable of processing a wide variety of materials to a high quality standard in a compact footprint. The SCM Olympic 500 features electronic adjustment and enables processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the Human-Machine Interface (HMI) • Maestro connect: prepared for later installation without needing a gateway • 2-radius processing, chamfering on all units with multi-edge tooling - Fine trimming and radius scraper unit, Radius = 1 mm - Fine trimming and radius scraper unit, Radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed “SAV€NERGY” KIT Internal lighting for the enclosure and glue application area “Nesting” tracing roller KIT Edge separating agent spraying unit "AAR" Spraying unit for final edge finishing Spraying unit for sensitive edges Jointing cutter unit "RT-V1" Hjdpfx Abjq A Tyzohoh “EASY SIZE” device – electronic quick adjustment for the jointing cutter unit Glue unit "VC-VM" SGP glue pot for EVA & PU, including quick-change device Ceramic lamp with infrared rays for preheating workpieces Electronic positioning of all pressure rollers End trimming unit "K-2 Radius" Chamfering and radius trimming unit "R-HP Multiedge 2R" Corner rounding unit "Round 2-A Multiedge 1R" 'MULTIEDGE 3' KIT for automatic switching between straight/R/R modes, for the “Round 2-A Multiedge 1R” unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit "RC-N" Buffing unit "SP-V" MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 98.495 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 25 mm, razmak između stupova: 370 mm, delovna prostornina: 74 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 59 g, minimalna višina orodja: 200 mm, izmetalna sila: 22.600 N, hod izmetalca: 100 mm, odmični hod: 600 mm, skupna dolžina: 3.500 mm, skupna širina: 1.400 mm, skupna višina: 1.910 mm, skupna masa: 3.000 kg, ogrevalna zmogljivost: 8,12 kW (11,04 KM), moč črpalke: 11.000 W, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Ponujamo ta rabljen KraussMaffei 50-180 CX stroj za brizganje, letnik 2006. Oznaka KM: 50-180 CX Mednarodna oznaka velikosti KM: 180 CX/50 Leto izdelave: 2006 Hodpfjyf E Dqox Abheh Serijska številka stroja: 61009011 Teža stroja: 3.000 Stanje: pripravljen za uporabo (rabljen) Obratovalne ure črpalke: 98495 Obratovalne ure avtomatskega dela: 83046 Opis: Premer polža: 25mm Zapiralna sila: 500kN Volumen brizga: 74cm3 Tlak vbrizgavanja max: 2500 bar Masa brizga: 59g Minimalna višina orodja: 200mm Max pot odpiranja: 600mm Max razdalja med ploščama: 600mm Razdalja med vodili: 370 Centrirni obroč brizgalna stran: Ø125 Centrirni obroč izmetalna stran: Ø125 Izmetalna sila naprej/nazaj: 22,6kN/9,9kN Hod izmetača: 100mm Dimenzija stroja (DxŠxV): 3500x1400x1910 mm Teža stroja: 3000kg Ogrevalna zmogljivost: 8,12kW Moč črpalke: 11kW Vrsta vhodnega toka: 400V, 50Hz standardni industrijski trofazna električna napeljava Oprema: dokumentacija Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 102.060 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, razmak između stupova: 420 mm, tlak vbrizgavanja: 2.429 letvica, minimalna višina orodja: 300 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.240 mm, skupna širina: 1.510 mm, skupna višina: 2.180 mm, skupna masa: 7.800 kg, ogrevalna zmogljivost: 10,97 kW (14,92 KM), moč črpalke: 18.500 W, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Ponujamo ta rabljen KraussMaffei 100-380 CX stroj za brizganje, letnik izdelave 2006. Stroj za brizganje plastike: KM 100-380 CX Mednarodna oznaka velikosti: KM 380 CX/100 Leto izdelave: 2006 Serijska številka: 61009013 Teža stroja: 7800 kg Stanje: pripravljen za uporabo (rabljen) Obratovalne ure črpalke: 102060 Obratovalne ure avtomatsko delo: 87744 Opis: Premer polža: 35mm Zapiralna sila: 1000kN Volumen brizga: 154ccm Tlak vbrizgavanja max: 2429bar Masa brizga: 59 ccm Minimalna višina orodja: 300mm Max pot odpiranja: 600mm Max razdalja med ploščama: 900 mm Razdalja med vodili: 420mm Centrirni obroč brizgalna stran: Ø125 Centrirni obroč izmetalna stran: Ø125 Izmetalna sila naprej/nazaj: 22,6/9,9 kN Hsdpfx Aeyf E Amobhoh Hod izmetača: 150mm Dimenzija stroja (DxŠxV): 4240x1510x2180 mm Teža stroja: 7800kg Ogrevalna zmogljivost: 10,97kW Moč črpalke: 18,5kW Vrsta vhodnega toka: 400V, 50Hz standardna industrijska trofazna električna napeljava Oprema: dokumentacija Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 12.800 h, številka stroja/vozila: 45561238, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, vrsta laserja: CO₂ laser, laserske ure: 12.800 h, laserska moč: 2.000 W, najv. debelina jeklene pločevine: 10 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, maks. debelina aluminijaste pločevine: 8 mm, moč: 2 kW (2,72 KM), vrsta hlajenja: voda, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje prahu, Working area 2520×1550×300 mm Hodsxgmnfepfx Abheh Table load 330 kg Ball-screw drives Machine dims 5745×2630×2789 mm Weight 7.5 t Selling due to buying a new, identical one

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Hsdpfsych Igjx Abhoh Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Hjdpfx Aoychqzobheh Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Hsdpfxoycg U Eo Abhsh Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Multifinisher Duplo Docu Cutter DC-545 HC Maks. format: 320 x 457 mm Min. format: 216 x 279 mm Min. 110 g/m², maks. 230 g/m² Samodejno podajanje Do 4 biganja prečno na smer podajanja Do 5 rezov vzporedno s smerjo podajanja: 2 stranska rezila, 3 sredinska rezila Do 10 rezov prečno na smer podajanja Samodejna nastavitev rezalne glave, programabilna funkcija Rezanje po oznaki ali črtni kodi Hodoygcpgepfx Abheh Električni priključek: 230V, 50Hz Teža: 100 kg

Stanje: rabljeno, Leto izdelave: 2006, Condition: Used Year of manufacture: 2006 Stock number: 5539 Delivery time: Prompt, subject to prior sale Country of origin: Taiwan Price: €55,100 In stock: 1 Special price: €49,600 Grinding length: 1000 mm Distance spindle - table: 850 mm Table size: 1000 x 610 mm Magnetic chuck: 1000 x 600 mm Table movement (hydraulic): 1000 mm Table speed: 5 – 25 m/min Cross feed: 1250 mm/min Cross feed incremental: 3 – 32 (0.02) mm Max. cross travel: 690 mm Automatic vertical feed max.: 400 mm/min Vertical feed: 400 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 1450 rpm Spindle motor: 11 kW Hydraulic motor: 3.7 kW Cross feed motor: 0.37 kW Total connected load: 20.6 kW Length: 3700 mm Width: 4000 mm Height: 3250 mm Transport dimensions: 4800 x 2830 x 2800 mm Weight: 7400 kg Max. table load: 1500 kg Max. workpiece weight on magnetic chuck: 1120 kg Max. workpiece weight on clamping table: 1500 kg Grinding wheel dimensions: 355 x 75 x 127 mm Servo drive for grinding wheel infeed, hardened and ground guideways Cross feed with inverter Grinding wheel spindle mounted on 6 high-precision angular contact ball bearings Electro-magnetic chuck Coolant unit with automatic paper filter and magnetic separator Automatic wheel dresser above grinding wheel (with automatic compensation) Grinding wheel with wheel flange Machine lamp Hjdpfxjwiq Ukj Abhjh Machine and equipment in compliance with CE regulations Operating instructions in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL

Stanje: rabljeno, • Holz Her Auriga 1308 XL FÜ + PU Hodpfxoycq Dwo Abhjh • Kompakte Bauweise – Kantenstärke 0,4–8 mm • SPS-Bildschirmsteuerung Edge-Control PPC 231 Touchscreen • Vorfräsaggregat zum Anarbeiten vor dem Verleimteil • Vollautomatisches Kantenmagazin für Rollen- und Streifenmaterial • Kleberauftragsstation GLU JET Patronen + PUR-Verleimung • Kleberauftragung mittels Düsentechnik • Werkstückhöhe 6–65 mm • Automatische Leimhöhenverstellung • Andruckwerk 1912-3 pneumatisch • Kappaggregat 1918 pneumatisch für Rollen- und Streifenmaterial bis 8 mm Kantenstärke • Mit pneumatischer Verstellung der Kappsägen von 0–10° für Schrägschnitte • Fräsaggregat 1827 MOT 4, bündiges Fräsen bis 8 mm, Radienfräsen, Fasefräsen – 15°, 1827 MOT NC-Achsen über Steuerpult • Formfräsaggregat 1832 pneumatisch, Abrunden der Ecken bis 3 mm Kantenstärke im Durchlauf • Ziehklingenaggregat 1929 MOT2 für Fasen und Radien mit 2 Ziehklingenträgern, NC-Achsen über Steuerpult • Flächenziehklingenaggregat – Finish • Schwabbelaggregat – Poliereinheit • Sprüheinrichtung im Ein- und Auslaufbereich • Komplette Werkzeugausstattung inklusive • Erstauslieferung 2013 • Maschine ist FUNKTIONSGEPRÜFT und in TOP-ZUSTAND • Ab Lager Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Odlično ohranjen stroj, malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Hjdpfxevuxihe Abhsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, vhodni tok: 24 A, Odlično ohranjen pik injektor - komplet linija steaker ( typ TDC - 400), hladilnik solnice in filter solnice, malo rabljen, popolnoma funkcionalen. 3 fazni priklop, 12 kW, 24 A, 380 V. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Hsdpoyfgwlofx Abhsh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, vhodni tok: 2 A, Odlično ohranjen stroj, malo rabljen 3 fazni elektro motor, potrebna majhne amperaža za priklop 2 A. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Hodpfjyfgtyex Abhoh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 210 kW (285,52 KM), vrsta goriva: dizel, barva: rumena, velikost pnevmatike: 710x26,5, stanje pnevmatik: 40 odstotek, Leto izdelave: 2016, obratovalne ure: 16.600 h, številka stroja/vozila: A080191, Oprema: dodatne luči, kabina, klimatska naprava, osvetlitev, Ponsse Buffalo 8W forvarder Kran K100, grabilnik Grippen 035 Centralno mazanje Hedpowd E Tkefx Abhoh LED osvetlitev 2 prejšnja lastnika

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HOP20170043, skupna širina: 1.490 mm, skupna dolžina: 820 mm, skupna višina: 1.345 mm, Industrijski dvokomorni vakuumski stroj namenjen za hitro in učinkovito pakiranje hrane in neprehrambenih izdelkov v komercialnih okoljih. Stroj je v odličnem stanju, takoj pripraven za uporabo. Omogoča MAP pakiranje, kar je bila tudi njegova glavna namembnost – pakiranje suhega sadja v MAP embalaži. Možno je vakuumirati ali pakirati v MAP vrečke katerikoli izdelek. Nima bazena za termično skrčenje. Kapaciteta črpalke je 63 m³/h (Busch). Hsdeyf A E Ejpfx Abheh