Kgt 550 nakup rabljenega (7.822)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Uničevalec dokumentov Schleicher s stiskalnico. Iiodpjubf S Dofx Ah Djh Naprava je delujoča in zaradi spremenjenih poslovnih postopkov ni več potrebna. Stroj se nahaja v Sloveniji, ogled je mogoč po dogovoru, prav tako demonstracija. Z veseljem lahko za vas organiziramo prevzem ali pošiljanje stroja.

Leto izdelave: 1990, Stanje: rabljeno, Flat bar shear at 45 N/mm²: Flat steel: 350 x 20 mm / 230 x 20 mm Profile steel shear: Angle steel 90°: 140 x 13 mm Angle steel 45°: 70 x 7 mm Rod steel shear: Round steel: 45 mm Square steel: 42 mm Iodpfx Ajdczt Eoh Deih Notcher: Square Punching diameter: up to 40 mm in 16 mm Press force: 550 kN Throat depth: 305 mm Rated power: 5.5 kW 2 work cylinders with 2 separate electric foot switches for two-man operation Dimensions (L x W x H): approx. 1360 x 750 x 1565 mm Weight: approx. 1260 kg

Stanje: rabljeno, Valjčni transporter z 90° verižnim izmetačem RA1846 Tip: Transnorm 3300-600-500 Transportna dolžina (FL): 3300 mm Širina valjev (RB): 550 mm Nazivna/zunanja širina (NB): 600 mm Širina verižnega izmetača: 700 mm Gradbena višina (BH): 140 mm Razmak nosilnih valjev: 80 mm vključno s pnevmatskim ustavljalcem Iiedok Abg Dopfx Ah Djh Opcijsko na voljo: - Nosilci - Stransko vodilo enostransko in obojestransko - Frekvenčni pretvornik Cene so neto brez DDV, iz centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno strokovno svetovanje nas preprosto kontaktirajte. Obrnite se na nas po telefonu ali e-pošti. Z veseljem vam svetujemo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega povpraševanja. Lep pozdrav, Vaša ekipa Dr. Sonntag GmbH & Co. KG Vaš strokovnjak in kontaktna oseba za intralogistiko

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good (used) condition and is fully functional. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are optionally available upon request. Belt curves are frequently used in intralogistics for in-house transport of general cargo, and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times pose no problem. Tapered drums and a specially developed belt guide system ensure maximum running smoothness. The pictures shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Construction height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° Support feet optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical data: 50 Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 Year of manufacture: 2001 Optionally available: - Supports - Side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For customized professional advice, please feel free to contact us. Reach out to us by phone or email. We are happy to support you with planning and implementing your projects. We look forward to hearing from you. Best regards, Iisdpsk Aa Unjfx Ah Dsh Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor GKF 1650-750-550 IR600 70° Right-Hand RA1441 The Transnorm belt curve conveyor is in good (used) condition and is fully operational. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are available as an optional extra on request. Belt curve conveyors are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Conical drums and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveying system were taken while still installed in a logistics center. Iisdpok Abazjfx Ah Dsh Technical data: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 1650 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Curve angle: 70° degrees Support feet: optional Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear, see pictures) Year of manufacture: 2001 Special feature/accessories: Side guides included on both sides Optionally available: Support stands Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2007, Gebhardt valjčni transporter 600-610-550 RA1909 Proizvajalec: Gebhardt Širina valjev (RB): 550 mm, jekleni valji Nazivna/zunanja širina (NB): 610 mm Dolžina: 6000 mm Višina okvirja: 130 mm Premer valja: 50 mm Razdalja med valji: 100 mm Ijdpfxok Abk Ie Ah Deih Motor: W30DT71D4/IS Moč: 0,37 kW Dobava brez podpor Opcijsko na voljo: Podpore Bočna vodila Za individualno, strokovno svetovanje nas preprosto kontaktirajte. Pokličite nas ali nam pišite po e-pošti. Z veseljem vam pomagamo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega sporočila. Lep pozdrav, Ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontakt za intralogistiko

Stanje: rabljeno, Leto izdelave: 2001, Transnorm balíkový obloukový dopravník vlevo GKF 50°-740-550 IR700 RA1948 Technické údaje: Délka dopravníku středový poloměr (NL): 851 mm Šířka rámu (NB): 750 mm Šířka pásu (GuB): 550 mm Stavební výška (BH): 200 mm Vnitřní poloměr (IR): 700 mm Úhel dopravníku: 50° Stojany: volitelně k dispozici Rychlost dopravníku (V m/s): 0,045-1,3 m/s Pohon: převodový motor SEW Elektrické údaje: 50Hz, 380-500V, 0,11 / 0,55 kW / S1 Pás: dvouvrstvý, zelený, hladký Rok výroby: 2001 Volitelné příslušenství: Stojany Boční vedení jednostranné nebo oboustranné Ceny jsou bez DPH, ze centrálního skladu Dr. Sonntag GmbH & Co KG, 97076 Würzburg Pro individuální a odborné poradenství nás neváhejte kontaktovat. Kontaktujte nás telefonicky nebo e-mailem. Ijdpfjk Abmqjx Ah Djih Rádi Vám pomůžeme s plánováním a realizací Vašich projektů. Těšíme se na Vaši odpověď. S pozdravem, Tým Dr. Sonntag GmbH & Co. KG Váš specialista a partner pro intralogistiku.

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Inclined Conveyor GF 4920-550-400 RA1606 The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW-brand motor and MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed for an additional charge upon request. Support stands are not included in the scope of delivery but are optionally available on request. The photos shown were taken while the conveyor system was still installed in a logistics center. Technical Data: Conveyor length (NL): 4920 mm (feed belt + inclining belt with curve and upper straight section) Isdpfxsk Abd No Ah Djih Frame width (NB): 550 mm Belt width (GuB): 400 mm Installation height (BH): 105 mm Support stands: available optionally Conveying speed (v m/s): steplessly adjustable up and down with frequency inverter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 Incline / Decline: adjustable Options available: Support stands Side guides (single or double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For personalized, professional advice, simply contact us. Reach us by phone or e-mail. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 85°-775-550 IR600 RA1658 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a gear motor from SEW. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times are no problem. Conical rollers and a specially developed belt guide system ensure maximum smooth running. Technical data: Model: Belt Curve Conveyor TS 1600-105 Conveying length, median radius (NL): 1703 mm Frame width (NB): 775 mm Belt width (GuB): 550 mm Iiedpek Abfbjfx Ah Deh Frame height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 85° Incline: 175 mm / 85° = 741.2 mm / revolution (360°) Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 (wear, see images) Year of manufacture: 2001 Optionally available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, professional advice, simply contact us. Get in touch by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Stanje: rabljeno, Leto izdelave: 1997, Transnorm Belt Curve Conveyor Left 90°-750-550-IR900 RA2007 Isdpfok Abtlex Ah Doih Belt curve conveyors are frequently used in intralogistics for the in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating periods are not a problem. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical data: Type: Belt Curve Conveyor Frame width (NB): 750 mm Belt width (GuB): 550 mm Motor height (MH): 480 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° Conveying speed (v m/s): Please contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt: KT58, will be replaced before delivery. Year of manufacture: 1997 Available options: Supports Side guides (single-sided and double-sided) Frequency inverter All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg If you require other dimensions or individual, professional advice, please contact us. You can reach us by phone or email, or use our filters on our website. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Inclined Conveyor GF 1995-550-400 RA1656 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed on request at an additional cost. Support stands are not included in the scope of delivery; these are optionally available upon request. The photos of the conveyor system were taken while still installed in a logistics center. Technical specifications: Conveyor length (NL): 1995 mm (feeder belt 560mm + inclined belt 1435mm) Frame width (NB): 550 mm Belt width (GuB): 400 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): infinitely adjustable via frequency inverter Drive: SEW geared motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 Incline / Decline: adjustable Optionally available: Support legs Side guides, single- or double-sided Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Iiodpek Abd Tofx Ah Djh For individual and professional advice, please don't hesitate to contact us. Simply reach out to us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Supports are not included in the delivery scope, but are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating periods pose no problem. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. The photos show the conveyor system still installed at a logistics center. Technical data: Iodpfx Ajk Abcgeh Djih Model designation: Belt Curve Conveyor TS 1600-105 Conveying length, middle radius (NL): 640 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support stands and side guides available optionally on both sides Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW geared motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double ply, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Optionally available: Supports Side guide, single-sided and double-sided Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, professional advice, feel free to contact us. Simply get in touch with us via phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist partner for Intralogistics

Stanje: rabljeno, Valjčni transporter z verižnim potiskačem za 90° RA1847 Tip: Transnorm 9900-600-500 Dolžina transporterja (FL): 9900 mm Širina valjev (RB): 550 mm Iiedpfx Ahsk Abg Is Deh Nazivna/zunanja širina (NB): 600 mm Širina verižnega potiskača: 700 mm Vgradna višina (BH): 140 mm Razmak nosilnih valjev: 80 mm vključno s pnevmatskim ustavljalcem Opcijsko na voljo: Nosilci Enostransko in obojestransko bočno vodilo Frekvenčni pretvornik Cene so neto brez DDV, s prevzemom iz centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno strokovno svetovanje nas preprosto kontaktirajte. Dosegljivi smo po telefonu ali e-pošti. Z veseljem vam pomagamo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega povpraševanja. Lep pozdrav, ekipi Dr. Sonntag GmbH & Co. KG Vaš specialist in kontaktna oseba za intralogistiko

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good used condition and fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery but are optionally available on request. Belt curves are commonly used in intralogistics for in-plant transport of piece goods and are essential components of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the full belt width, they are suitable for long operating times. Tapered rollers and a specially engineered belt guidance system ensure the highest possible running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius, NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Curve angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, type KT36 Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support legs - Single or double side guide Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, please get in touch with us. Iijdek Aa Ukspfx Ah Deh Contact us by phone or email—we are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2007, Gebhardt Roller Diverter Sorter 45° 1800-1300-550 RA1148 Year of Manufacture: 2007 Permissible Load Capacity: 30 kg/m Net Weight: 40 kg/m Roller Width: 550 mm Nominal/External Width (NB): 610 / 1300 mm Diverter Element: Rollers Set Construction Height: 680 mm Conveying Speed: 0.35 m/sec Brake for Accumulation Mode on Diverter Line Diverter Drive Mechanism: Electric Dimensions of Conveyed Goods (L x W): 600 mm x 400 mm Optional: Custom height adjustment on request Electrical add-ons such as photoelectric sensors, barcode scanners Control system/software Ijdpfx Ajk Aa Efjh Djih Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good used condition and fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery but are optionally available on request. Belt curves are commonly used in intralogistics for in-plant transport of piece goods and are essential components of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the full belt width, they are suitable for long operating times. Tapered rollers and a specially engineered belt guidance system ensure the highest possible running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius, NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Curve angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, type KT36 Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support legs - Single or double side guide Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, please get in touch with us. Contact us by phone or email—we are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Iiodpfsk Abuiex Ah Djh Your specialist and contact partner for intralogistics

Stanje: rabljeno, Lippert lead-on, lagging, and belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Data: Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): Speed is adapted to the main conveyor via gear ratio Drive: Timing belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options: Supports Iodjmqty Uepfx Ah Dsih Side guides (one-sided or double-sided) Please note: A suitable sprocket must be installed on the output shaft for the timing belt drive. Therefore, a different return roller may be required. Please contact us for further information. Defective belts are replaced before delivery. Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2007, Gebhardt Roller Curve Conveyor 90° Right 610-550 with 2x Straight Sections RA1282 The Gebhardt roller curve was manufactured in 2007 and is in very good used condition. It is equipped with an SEW brand motor. Supports are included in the scope of delivery. Technical Data: Manufacturer: Gebhardt Isdpfx Ahsk Aa Rye Doih Type: 314.01 Position: 014.15 Year of Manufacture: 2007 Condition: Very good (used) Motor: Fully functional Angle: 90° Inner Radius (IR): 850 mm Nominal/Outer Width (NB): 610 mm Usable Width (NUB): 550 mm Straight Section Length: 1 x 300 mm + 1 x 150 mm Motor Type: SEW geared motor Motor Power: 0.37 kW / S1 50 Hz 2.00/1.15 A Conveying Speed: 0.37 m/s Drive: Head drive Rollers: Type G6/50, slide bearing with tapered plastic element Weight: 110 kg Scope of Delivery: Incl. supports, 670 mm top edge of rollers Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert advice, please do not hesitate to contact us. Simply reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you! Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Stanje: rabljeno, Lippert lead-on, lagging, and belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Data: Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): Speed is adapted to the main conveyor via gear ratio Drive: Timing belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options: Supports Side guides (one-sided or double-sided) Please note: A suitable sprocket must be installed on the output shaft for the timing belt drive. Therefore, a different return roller may be required. Please contact us for further information. Defective belts are replaced before delivery. Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Iodpfx Asmqty Rsh Djih Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum smoothness and quiet operation. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 4820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 1000 mm Curve angle: 180° degrees Support legs: optionally available Isdpfxek Abcrj Ah Dsih Conveying speed (v m/s): infinitely variable up and down with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (wear as per pictures) Year of construction: 2001 Special features/accessories: Side guides included on both sides Optionally available: Support legs Net price plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2007, Gebhardt Roller Diverter Sorter 45° 2400-1300-550 RA1147 Type 356.10 Year of manufacture: 2007 Iodpfsk Aa Ebjx Ah Deih Permissible load: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Nominal/outer width (NB): 610 mm Ejector element: Rollers Set construction height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation operation on the discharge line Drive for ejection mechanism: Electric Dimensions of conveyed goods (L x W): 600 mm x 400 mm Optional: Adjusted height according to your requirements Electrical attachments such as light barriers, barcode sensors Control/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2007, Gebhardt Roller Conveyor Diverter Sorter 45° 1900-1800-550 RA1149 Year of manufacture: 2007 Permissible load capacity: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Ijdpfx Ajk Aa Eish Dsih Nominal/overall width (NB): 610 / 1800 mm Conveyor length: 1900 mm Divert element: roller bars Set conveyor height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation mode on divert conveyor Divert mechanism drive: electric Dimensions of conveyed goods: L x W = 600 mm x 400 mm Optional features: Custom height adjustment on request Electrical accessories such as photoelectric sensors, barcode scanners Control system/software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us easily by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve conveyor is in good (used) condition and fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the delivery scope but are optionally available upon request. Belt curves are commonly used in intralogistics for the internal transport of unit loads and are indispensable components in modern distribution centers. Transnorm belt curves excel in terms of performance and reliability. Thanks to the low-tension drive system across the entire belt width, long operating times are not an issue. Tapered drums and a specially developed belt guiding system ensure the smoothest possible operation. The images shown were taken in the still-installed state of the conveyor system at a logistics center. Technical Data: Model Designation: Belt Curve Conveyor TS 1600-105 Conveying Length (middle radius, NL): 680 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Installation Height (BH): 210 mm Inner Radius (IR): 600 mm Curve Angle: 45° Support Legs: optionally available Conveying Speed (v m/s): 0.03–1.05 m/s Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz V380-500, kW 0.11/0.55/S1 Belt: double-layered, green, smooth, KT36 (see photos for wear) Year of Manufacture: 2001 Optional Accessories: Supports Side guides, single- or double-sided Iiedpjk Aba Tsfx Ah Doh Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For customized, professional advice, please contact us directly. Reach out by phone or email—we are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support stands are not included in the scope of delivery but are available as an option upon request. Belt curve conveyors are frequently used in intralogistics for the internal transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times are easily achievable. Tapered rollers and a specially designed belt guiding system ensure maximum smoothness in operation. The shown images of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Iisdpfx Ahjk Aa T Ro Djh Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 3,900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees Support feet: optionally available Conveying speed (v m/s): adjustable both up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double ply, green, smooth Year of construction: 2001 Special features / Accessories: Side guides on both sides included Optionally available: - Support stands - Side guide, either single-sided or double-sided All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalized, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2000, Transnorm Belt Curve Conveyor Right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully functional. It is equipped with a SEW-branded gear motor. Support legs are not included with delivery; these are available optionally on request. Belt curves are widely used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves deliver impressive performance and reliability. The low-tension drive across the entire belt width allows for prolonged operation. Tapered drums and a specially developed belt guidance system ensure maximum running smoothness. Technical Data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inside radius (IR): 600 mm Conveying angle: 70° Support legs: optionally available Iisdpfx Ahek Ablpo Dsh Conveying speed (v m/s): infinitely adjustable from 0.032 to 1.17 m/s with frequency inverter Drive: SEW gear motor Electrical data: 50Hz, 380–500V, 0.55 kW / S1 Year of manufacture: 2000 Scope of delivery: Without support legs Optionally available: Support legs Side guides (single-sided or double-sided) All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional consultation, please do not hesitate to contact us. Contact us by phone or email. We would be pleased to assist you in the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics