Karl Schermer nakup rabljenega (397)

Stanje: rabljeno, številka stroja/vozila: 658, SEAM BURN-IN MACHINE – Joint-setting machine Karl Tränklein FEM 658-58-4, Serial No. 658-58-4 Working width: 500 mm Online video inspection via Skype video possible. We would be pleased to welcome you for a visit – more machines available in stock. Iasdpfx Aoh Axiiebxeu Available immediately – can be viewed Located in Emskirchen / Nuremberg – machine can be tested on site.

Stanje: rabljeno, antique guillotine / antike Schneidmaschine Online video inspection via Skype We would be pleased to arrange your visit – more machines available in stock Iasdpjt Drl Dsfx Abxju Available immediately – Inspections possible Located in Emskirchen / Nuremberg – Machine can be tested

Stanje: rabljeno, številka stroja/vozila: 608, Falzeinbrennmaschine – Joint-setting machine Karl Tränklein FEM 608-53-6 Serial-No. 608-53-6 Working width: 500 mm Isdpfxsh Axifs Abxoau Online video inspection via Skype Video We would be pleased to welcome your visit – more machines in stock Available immediately – Can be inspected Located in Emskirchen/Nuremberg – Testing possible

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Zelo robustna stiskalnica za knjige naprodaj. Proizvajalec Karl Krause Leipzig. Velikost stiskalnice: 53 x 66 cm. Seveda ste vabljeni, da to napravo pri nas tudi sami preizkusite. Za vas lahko uredimo prevoz/pakiranje ter jo naložimo na tovornjak ali v kontejner. Povprašajte za ceno z vključenim prevozom (lokacija: Nizozemska). Lep pozdrav, Henk Hoos Isdpeymctlsfx Abxsau

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Iaedpfx Absgyd S Sjxeu Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Iodot Dv I Aepfx Abxsau Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1961, stanje: rabljeno, General / Technical Data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Tensile force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke: per machine unit 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volt / 50 Hz Iodpslwu Hrofx Abxoau Note: The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Iajdpfx Asgyd Svsbxou Model: RSI6DT Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Iodogyd S Dspfx Abxoau Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Iedpfxeiw Dlko Abxjau Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Iasdpotuuvzsfx Abxju Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1960, stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Iedpfx Abeui Sboxoau Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Leto izdelave: 1951, stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Iaodpfx Abjdcdrpsxou Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1958, stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Iodjda Ugijpfx Abxsau Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Stanje: dober (rabljeno), Mixer, cutter, and emulsifier combined in a single housing. Benefits include: - Space-saving design thanks to compact construction, - Product size reduction in the bowl under vacuum with simultaneous mixing and cooking, - Consistently stable end product thanks to fully automatic process control, - Capability for both direct and indirect heating and cooling, - Ability to produce fine emulsions and paste-like masses, as well as products with both fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Iajdpfxjm Drylj Abxeu Installed power: 2x106 kW + 132 kW Main material: stainless steel Agitator tank: 2000 l

Stanje: dober (rabljeno), Stroj za vlečenje utorov / struženje KARL KLINK RSI 2,5 EH Iodpfx Aoymz N Eobxoau -Leto izdelave: 1965 -Vlečna sila: 2500 kg / (25 kN) -Hitrost utora: 1 mm/min do 9 mm/min (brezstopenjsko nastavljivo) -Maks. hod: 800 mm -Maks. premer obdelovanca: pribl. 250 mm -Motor: pribl. 3 kW -Naprava za hlajenje -Prikaz vlečne sile -Omejitev vlečne sile -Različne vodilne puše (glej slike) -Noge stroja Dimenzije: DxŠxV 1,1x0,7x2 metra / Teža 1600 kg Možne so napake in tipkarski popravki.

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Na voljo je celoten obrat za drobljenje zamrznjenih sirovih blokov. 1) Dvižna naprava Karl Schnell 605, namen: dvigovanje transportnih vozičkov, maksimalna prostornina vozička: 300 l, višina dviga: 2380 mm, dvižna sila: 3500 N, hitrost dviga: 4,5 m/min, dimenzije stroja (X/Y/Z): pribl. 3800 mm/600 mm/800 mm, teža: pribl. 600 kg. 2) Droblilnik za zamrznjene bloke Karl Schnell 487, višina dovoda: 2485 mm, višina odvoda: 737 mm, širina odprtine: 680 mm, širina zob: 44 mm, hitrost vrtenja: 65 obr/min, moč motorja: 30 kW, dimenzije stroja (X/Y/Z): pribl. 1800 mm/1400 mm/2700 mm, teža: pribl. 2100 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Iaodsx S Rb Nspfx Abxou

Leto izdelave: 1980, stanje: pripravljen za uporabo (rabljen), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of manufacture: 1980, operating pressure: 7 bar, test pressure: 9.1 bar, operating temperature: 20°C, medium: compressed air, capacity: 5,300 liters. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15,000 liters, operating pressure: 4 ATÜ, test pressure: 5.2 ATÜ. An on-site inspection is possible. Iaodsumwg Ejpfx Abxju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je navpični notranji vretenasti stroj (räumlni stolp) Karl Klink z dvižno mizo in portalom za nalaganje. Moč broširanja: 63kN, hod broširanja: 1000mm, hod vretena: 400mm, hitrost broširanja: 7,5m/min, hitrost povratka: 24m/min, postaj: 1, širina mize: 500mm. Dimenzije stroja X/Y/Z: cca 3700mm/3000mm/3200mm, teža: cca 3500kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Iedpexwcvmofx Abxoau

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Karl Schnell F150 Emulgator Proizvajalec: Karl Schnell GmbH & Co. KG Model: F150 Tip: 049 Številka stroja: 38717 Isdoycl Rrspfx Abxsau Leto izdelave: 2015 Napajanje: 400 V, 3 faze, 50 Hz, 32 A Moč: 7,5 kW Teža: 152 kg Dimenzije: 950 × 700 × 1100 mm Emulgator Karl Schnell F150 je profesionalna naprava, namenjena industrijskemu emulgiranju in homogenizaciji živil, uporabljena predvsem pri proizvodnji klobas, paštet, nadevov in drugih mas z enotno konsistenco. Emulgatorji serije F znamke Karl Schnell zagotavljajo stalen in ponovljiv učinek emulzije, skrajšujejo čas procesa in minimalizirajo dvig temperature izdelka med obdelavo. To so rešitve, ki jih odlikuje robustna konstrukcija iz nerjavnega jekla, kar zagotavlja higieno dela in dolgo življenjsko dobo naprave.

Stanje: dober (rabljeno), Tranklein EH I kotni rezalnik Izdelano v Nemčiji. Odlično stanje. To je profesionalna naprava za zaobljene kote. Masivna konstrukcija iz litega železa in močan pritisk zagotavljata natančno delovanje. Ijdpswunicjfx Abxeau Zamenljivi noži. Nastavljive meje rezanja. Priložen je nož z radijem 4 mm. Največja višina skladovnice: 55 mm Teža: 32 kg Gre za trenutno proizveden model.

Leto izdelave: 1989, stanje: nepreverjeno (rabljeno), številka stroja/vozila: 52353, Kratek opis: - Delovna širina 960 mm - Vhod: podaja z navitja - Odpirač ni priložen - Odlaganje v kanister Iodsw Rkgbjpfx Abxjau - Dokumentacija stroja je na voljo Zadnja uporaba (jan. 2024): - Tehnično-aplikativno testiranje za oceno kardiranja poliestrskih vlaken (pribl. 6 kg/vzorec), - ni proizvodni stroj; - beli tipi - netestirano, samo za rezervne dele! Stroj je razstavljen in shranjen, ogled na lokaciji je možen. Prevzem možen samo v 14727 Premnitz, pošiljanje ni možno. V primeru interesa pričakujemo vašo ponudbo. Vprašanja sprejemamo samo pisno.

Leto izdelave: 1983, stanje: nepreverjeno (rabljeno), številka stroja/vozila: 50960, Kratek opis: - Delovna širina 960 mm - Vhod: podajanje s koluta - Odpiralnik ni priložen - Izhod: karden trak - Odlaganje v posodo - Dokumentacija stroja je na voljo Zadnja uporaba (jan. 2024): - Tehnični preizkus izdelka za oceno kardanja poliestrskih vlaken (pribl. 6 kg/vzorec) - Ni proizvodni stroj - 0,9-3,3 dtex; 32-60 mm (vedno z enakimi nastavitvami) Isdpfx Abew Rkdyjxjau - Črne in v masi barvane vrste - Ni preizkušeno, samo za rezervne dele! Stroj je razstavljen in skladiščen, lahko si ga ogledate na lokaciji. Samo osebni prevzem v 14727 Premnitz s strani kupca, brez dostave. V primeru zanimanja pričakujemo vašo ponudbo. Povpraševanja izključno pisno.

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Throughput capacity: 10,000 kg/h, max. filling pressure: 50 bar, portion range: 1 g–1,000 kg, hopper volume: 300 l, max. portioning speed: 700 portions/min, connected load: 14.7 kW, weight: 1.2 t. Iaedpfxeh Ebw Se Abxju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, skupna masa: 2.900 kg, moč: 8 kW (10,88 KM), vhodna napetost: 380 V, število bročirnih položajev: 1, skupna širina: 6.100 mm, skupna višina: 1.900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine no.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in the crossbeam: 85 mm Broaching tool clamping: Universal pull head for flat shanks up to 25 mm width Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: Iasdoxtcz Iopfx Abxju • The machine features manual-hydraulic control for the broaching stroke movement • The machine is equipped with an integrated coolant/lubricant system • A basic oil drip tray is mounted on the machine bed without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. Broaching needles, arbors and pull heads can be supplied upon request.