Jigsaw nakup rabljenega (13)

Stanje: rabljeno, Višina reza pribl. 60 mm Motor 2,2 Priključna napetost 16 A / 400 V Mobilna žaga za drva za rezanje letvic, vej in druge lesne odpadke. Širina: 600 mm Kedpfx Astvb Hhodkjww Dolžina: 950 mm

Stanje: novo, Technical Data: Dimensions and Weights Working height:   850 – 1150 mm Log cradle height:   735 mm Length approx.:   1270 mm Width/Depth approx.: 730 mm Height approx.:   1130 mm Weight approx.:   121.5 kg Drive Drive type:   Electric motor with direct drive Ksdpfx Adovwfxhokoww Electrical Data Rated power:   7.5 kW Connection voltage:   400 V Phase(s):   3-phase Current type:   AC Mains frequency:   50 Hz Saw Blade Diameter:   700 mm Cutting Capacity Cradle round timber:   240 mm Cradle cross-cut:   250 mm Cradle split wood:   370 x 240 mm

Stanje: dober (rabljeno), Sabljasta žaga, lisičji rep, tigrasta žaga, recipro žaga -Industrijska vbodna žaga z: mazanjem -Napetost: 220 V Kjdpfx Adjfc D N Hjkoww -Moč: 750 W -Rezalna zmogljivost: Les/Aluminij/Jeklo 120/30/12 mm -Cena: na kos -Količina: 1 kos -Dimenzije: 360/120/H300 mm -Teža: 6,8 kg/kos

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, ø 450-1200 mm PE/PP Kwedpfx Aow H Iyfodksw central clamping

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), From insolvency: As-new clamping device Spitznas Kwodjk T Au Nopfx Adksw with automatic feed Model 512089940 in original case with manual

Leto izdelave: 2005, stanje: dober (rabljeno), From insolvency: Kedpfx Aslczd Hjdkeww Spitznas Model 512120010 Year of manufacture unknown Equipped with SPITZNAS clamping device with automatic feed, model 512089940 Comes in original case

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), From insolvency: Kjdpjk T Av Refx Adkoww Model RRI 8460 Serial no. 18/70139708 with clamping device Spitznas with automatic feed, model 512089940 in original case

Stanje: rabljeno, Leto izdelave: 2009, Circular Saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Kwsdswfd Icopfx Adkow Specifications: Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: Length 4800 x Height 2225 x Width 2580 mm Automatic feed and discharge Cut-off conveyor Angle cutting Clamping CNC controller Cutting capacity at 90° (round, square, flat): 150 / 140 x 140 / 200 x 100 mm Cutting capacity at 45° (round, square, flat): 145 / 120 x 120 / 160 x 80 mm Cutting capacity at 60° (round, square, flat): 115 / 100 x 100 / 120 x 60 mm Blade diameter (Ø 350 mm opt.): Ø 400 to 450 mm If you have any further questions, feel free to contact us.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Kwedpedwktksfx Adkjw Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: dober (rabljeno), Cevna sabljasta žaga, ročna žaga za cevi, ročna žaga za nosilce, sabljasta žaga, lisičji rep, vbodna žaga - Proizvajalec: Fein, cevna sabljasta žaga tip AST 663 z dodatki - Moč: 750 W Kodpfsydikxjx Adksww - Število hodov: 300 /min - Pripomočki: transportna škatla, žagine liste glej fotografije - Dimenzije škatle: 680/400/V350 mm - Skupna teža: 27 kg

Stanje: dober (rabljeno), Sabljasta žaga za cevi, vbodna žaga za cevi, vbodna žaga za nosilce, sabljasta žaga, vodilni nosilec, objemka za cevi -Proizvajalec: Fein, nosilec za sabljasto žago za cevi tipa AST 663 ali podobno -Vpenjanje: s pritrditvenim trakom -Količina: na voljo 2 nosilca Ksdpfexalygex Adkjww -Cena: na kos -Dimenzije škatle: 390/310/V425 mm -Teža: 25 kg/kos.

Stanje: dober (rabljeno), Reciprocating pipe saw, pipe jigsaw, beam jigsaw, reciprocating saw, sabre saw Ksdpfxjcm D A Re Adkeww - Ideal for sawing work, even in wet or damp rooms and shafts, wherever electric reciprocating saws are not permitted - Output power: 1000 W - Steel pipes: up to max. Ø 160 mm - Supplied in a case - Quantity: 4 saws available - Price: per unit - Dimensions: 690/200/H120 mm - Weight: 8 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 70 mm, največja širina rezanja: 1.200 mm, premer žaginega lista: 125 mm, največja hitrost vrtenja: 3.800 obr/min, skupna dolžina: 6.000 mm, skupna višina: 1.300 mm, skupna masa: 3.500 kg, leto zadnje generalne obnove: 2024, dolžina rezanja (maks.): 4.200 mm, vrtina vpenjalnega tuleca: 75 mm, višina reza z zareznim rezilom (max.): 2 mm, premer ekstrakcijske šobe: 250 mm, dolžina podajanja os X: 4.500 mm, hitrost pomika os X: 7 m/min, glavni premer žaginega lista: 350 mm, hitrost žaginega lista: 3.800 obr/min, pogonska enota žage: 7.500 W, zahteva za prostor dolžina: 6.500 mm, potrebna širina: 3.000 mm, Longitudinal saw, also suitable for cross-cutting. Ideally suited for longitudinal edging of rough-sawn boards and subsequent width cutting before planing. With this machine, cutting lumber is incomparably easier than on traditional saws, even those with a carriage. Can operate in both automatic and semi-automatic modes. The cutting unit has four adjustable positions based on the workpiece length, so the unit does not have to return all the way back to the end of the machine, significantly reducing the lumber cutting cycle time. Greatly facilitates and speeds up handling and preparation of boards for planing, and the precise cut ensures better alignment, saving time during planing. Operation is relatively safe, as the operator does not come into direct contact with the material during cutting. The workpiece is clamped from above with a pressure beam using compressed air. The pressure beam and saw unit feed are activated via a foot pedal. Also equipped for panel cutting with a scoring unit. The machine comes with accessories for various applications. Perfect for small and medium-sized joineries processing thick, heavy lumber. A solid and durable machine. Kedpfeuyvniox Adkoww